diff options
Diffstat (limited to 'drivers/net/tsec.c')
| -rw-r--r-- | drivers/net/tsec.c | 117 |
1 files changed, 97 insertions, 20 deletions
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 25392f6..e91d9ea 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -241,10 +241,9 @@ int tsec_init(struct eth_device *dev, bd_t * bd) * It will wait for the write to be done (or for a timeout to * expire) before exiting */ -void write_phy_reg(struct tsec_private *priv, uint regnum, uint value) +void write_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum, uint value) { volatile tsec_t *regbase = priv->phyregs; - uint phyid = priv->phyaddr; int timeout = 1000000; regbase->miimadd = (phyid << 8) | regnum; @@ -255,17 +254,19 @@ void write_phy_reg(struct tsec_private *priv, uint regnum, uint value) while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ; } +/* #define to provide old write_phy_reg functionality without duplicating code */ +#define write_phy_reg(priv, regnum, value) write_any_phy_reg(priv,priv->phyaddr,regnum,value) + /* Reads register regnum on the device's PHY through the * registers specified in priv. It lowers and raises the read * command, and waits for the data to become valid (miimind * notvalid bit cleared), and the bus to cease activity (miimind * busy bit cleared), and then returns the value */ -uint read_phy_reg(struct tsec_private *priv, uint regnum) +uint read_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum) { uint value; volatile tsec_t *regbase = priv->phyregs; - uint phyid = priv->phyaddr; /* Put the address of the phy, and the register * number into MIIMADD */ @@ -288,6 +289,9 @@ uint read_phy_reg(struct tsec_private *priv, uint regnum) return value; } +/* #define to provide old read_phy_reg functionality without duplicating code */ +#define read_phy_reg(priv,regnum) read_any_phy_reg(priv,priv->phyaddr,regnum) + /* Discover which PHY is attached to the device, and configure it * properly. If the PHY is not recognized, then return 0 * (failure). Otherwise, return 1 @@ -571,6 +575,63 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) return 0; } +/* Parse the RTL8211B's status register for speed and duplex + * information + */ +uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv) +{ + uint speed; + + mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS); + if ((mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) && + !(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + int i = 0; + + puts("Waiting for PHY realtime link"); + while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + priv->link = 0; + break; + } + + if ((i++ % 1000) == 0) { + putc('.'); + } + udelay(1000); /* 1 ms */ + mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS); + } + puts(" done\n"); + udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) + priv->link = 1; + else + priv->link = 0; + } + + if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX) + priv->duplexity = 1; + else + priv->duplexity = 0; + + speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED); + + switch (speed) { + case MIIM_RTL8211B_PHYSTAT_GBIT: + priv->speed = 1000; + break; + case MIIM_RTL8211B_PHYSTAT_100: + priv->speed = 100; + break; + default: + priv->speed = 10; + } + + return 0; +} + /* Parse the cis8201's status register for speed and duplex * information */ @@ -1361,6 +1422,33 @@ struct phy_info phy_info_dp83865 = { }, }; +struct phy_info phy_info_rtl8211b = { + 0x001cc91, + "RealTek RTL8211B", + 4, + (struct phy_cmd[]){ /* config */ + /* Reset and configure the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + /* Status is read once to clear old link state */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + }, +}; + struct phy_info *phy_info[] = { &phy_info_cis8204, &phy_info_cis8201, @@ -1374,6 +1462,7 @@ struct phy_info *phy_info[] = { &phy_info_lxt971, &phy_info_VSC8244, &phy_info_dp83865, + &phy_info_rtl8211b, &phy_info_generic, NULL }; @@ -1497,18 +1586,6 @@ static void relocate_cmds(void) #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \ && !defined(BITBANGMII) -struct tsec_private *get_priv_for_phy(unsigned char phyaddr) -{ - int i; - - for (i = 0; i < MAXCONTROLLERS; i++) { - if (privlist[i]->phyaddr == phyaddr) - return privlist[i]; - } - - return NULL; -} - /* * Read a MII PHY register. * @@ -1519,14 +1596,14 @@ static int tsec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { unsigned short ret; - struct tsec_private *priv = get_priv_for_phy(addr); + struct tsec_private *priv = privlist[0]; if (NULL == priv) { printf("Can't read PHY at address %d\n", addr); return -1; } - ret = (unsigned short)read_phy_reg(priv, reg); + ret = (unsigned short)read_any_phy_reg(priv, addr, reg); *value = ret; return 0; @@ -1541,14 +1618,14 @@ static int tsec_miiphy_read(char *devname, unsigned char addr, static int tsec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - struct tsec_private *priv = get_priv_for_phy(addr); + struct tsec_private *priv = privlist[0]; if (NULL == priv) { printf("Can't write PHY at address %d\n", addr); return -1; } - write_phy_reg(priv, reg, value); + write_any_phy_reg(priv, addr, reg, value); return 0; } |