diff options
Diffstat (limited to 'drivers/net/sunxi_emac.c')
-rw-r--r-- | drivers/net/sunxi_emac.c | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c new file mode 100644 index 0000000..5a06d68 --- /dev/null +++ b/drivers/net/sunxi_emac.c @@ -0,0 +1,521 @@ +/* + * sunxi_emac.c -- Allwinner A10 ethernet driver + * + * (C) Copyright 2012, Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <malloc.h> +#include <miiphy.h> +#include <net.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +/* EMAC register */ +struct emac_regs { + u32 ctl; /* 0x00 */ + u32 tx_mode; /* 0x04 */ + u32 tx_flow; /* 0x08 */ + u32 tx_ctl0; /* 0x0c */ + u32 tx_ctl1; /* 0x10 */ + u32 tx_ins; /* 0x14 */ + u32 tx_pl0; /* 0x18 */ + u32 tx_pl1; /* 0x1c */ + u32 tx_sta; /* 0x20 */ + u32 tx_io_data; /* 0x24 */ + u32 tx_io_data1;/* 0x28 */ + u32 tx_tsvl0; /* 0x2c */ + u32 tx_tsvh0; /* 0x30 */ + u32 tx_tsvl1; /* 0x34 */ + u32 tx_tsvh1; /* 0x38 */ + u32 rx_ctl; /* 0x3c */ + u32 rx_hash0; /* 0x40 */ + u32 rx_hash1; /* 0x44 */ + u32 rx_sta; /* 0x48 */ + u32 rx_io_data; /* 0x4c */ + u32 rx_fbc; /* 0x50 */ + u32 int_ctl; /* 0x54 */ + u32 int_sta; /* 0x58 */ + u32 mac_ctl0; /* 0x5c */ + u32 mac_ctl1; /* 0x60 */ + u32 mac_ipgt; /* 0x64 */ + u32 mac_ipgr; /* 0x68 */ + u32 mac_clrt; /* 0x6c */ + u32 mac_maxf; /* 0x70 */ + u32 mac_supp; /* 0x74 */ + u32 mac_test; /* 0x78 */ + u32 mac_mcfg; /* 0x7c */ + u32 mac_mcmd; /* 0x80 */ + u32 mac_madr; /* 0x84 */ + u32 mac_mwtd; /* 0x88 */ + u32 mac_mrdd; /* 0x8c */ + u32 mac_mind; /* 0x90 */ + u32 mac_ssrr; /* 0x94 */ + u32 mac_a0; /* 0x98 */ + u32 mac_a1; /* 0x9c */ +}; + +/* SRAMC register */ +struct sunxi_sramc_regs { + u32 ctrl0; + u32 ctrl1; +}; + +/* 0: Disable 1: Aborted frame enable(default) */ +#define EMAC_TX_AB_M (0x1 << 0) +/* 0: CPU 1: DMA(default) */ +#define EMAC_TX_TM (0x1 << 1) + +#define EMAC_TX_SETUP (0) + +/* 0: DRQ asserted 1: DRQ automatically(default) */ +#define EMAC_RX_DRQ_MODE (0x1 << 1) +/* 0: CPU 1: DMA(default) */ +#define EMAC_RX_TM (0x1 << 2) +/* 0: Normal(default) 1: Pass all Frames */ +#define EMAC_RX_PA (0x1 << 4) +/* 0: Normal(default) 1: Pass Control Frames */ +#define EMAC_RX_PCF (0x1 << 5) +/* 0: Normal(default) 1: Pass Frames with CRC Error */ +#define EMAC_RX_PCRCE (0x1 << 6) +/* 0: Normal(default) 1: Pass Frames with Length Error */ +#define EMAC_RX_PLE (0x1 << 7) +/* 0: Normal 1: Pass Frames length out of range(default) */ +#define EMAC_RX_POR (0x1 << 8) +/* 0: Not accept 1: Accept unicast Packets(default) */ +#define EMAC_RX_UCAD (0x1 << 16) +/* 0: Normal(default) 1: DA Filtering */ +#define EMAC_RX_DAF (0x1 << 17) +/* 0: Not accept 1: Accept multicast Packets(default) */ +#define EMAC_RX_MCO (0x1 << 20) +/* 0: Disable(default) 1: Enable Hash filter */ +#define EMAC_RX_MHF (0x1 << 21) +/* 0: Not accept 1: Accept Broadcast Packets(default) */ +#define EMAC_RX_BCO (0x1 << 22) +/* 0: Disable(default) 1: Enable SA Filtering */ +#define EMAC_RX_SAF (0x1 << 24) +/* 0: Normal(default) 1: Inverse Filtering */ +#define EMAC_RX_SAIF (0x1 << 25) + +#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \ + EMAC_RX_MCO | EMAC_RX_BCO) + +/* 0: Disable 1: Enable Receive Flow Control(default) */ +#define EMAC_MAC_CTL0_RFC (0x1 << 2) +/* 0: Disable 1: Enable Transmit Flow Control(default) */ +#define EMAC_MAC_CTL0_TFC (0x1 << 3) + +#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC) + +/* 0: Disable 1: Enable MAC Frame Length Checking(default) */ +#define EMAC_MAC_CTL1_FLC (0x1 << 1) +/* 0: Disable(default) 1: Enable Huge Frame */ +#define EMAC_MAC_CTL1_HF (0x1 << 2) +/* 0: Disable(default) 1: Enable MAC Delayed CRC */ +#define EMAC_MAC_CTL1_DCRC (0x1 << 3) +/* 0: Disable 1: Enable MAC CRC(default) */ +#define EMAC_MAC_CTL1_CRC (0x1 << 4) +/* 0: Disable 1: Enable MAC PAD Short frames(default) */ +#define EMAC_MAC_CTL1_PC (0x1 << 5) +/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */ +#define EMAC_MAC_CTL1_VC (0x1 << 6) +/* 0: Disable(default) 1: Enable MAC auto detect Short frames */ +#define EMAC_MAC_CTL1_ADP (0x1 << 7) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_PRE (0x1 << 8) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_LPE (0x1 << 9) +/* 0: Disable(default) 1: Enable no back off */ +#define EMAC_MAC_CTL1_NB (0x1 << 12) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_BNB (0x1 << 13) +/* 0: Disable(default) 1: Enable */ +#define EMAC_MAC_CTL1_ED (0x1 << 14) + +#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \ + EMAC_MAC_CTL1_PC) + +#define EMAC_MAC_IPGT 0x15 + +#define EMAC_MAC_NBTB_IPG1 0xc +#define EMAC_MAC_NBTB_IPG2 0x12 + +#define EMAC_MAC_CW 0x37 +#define EMAC_MAC_RM 0xf + +#define EMAC_MAC_MFL 0x0600 + +/* Receive status */ +#define EMAC_CRCERR (0x1 << 4) +#define EMAC_LENERR (0x3 << 5) + +#define DMA_CPU_TRRESHOLD 2000 + +struct emac_eth_dev { + u32 speed; + u32 duplex; + u32 phy_configured; + int link_printed; +}; + +struct emac_rxhdr { + s16 rx_len; + u16 rx_status; +}; + +static void emac_inblk_32bit(void *reg, void *data, int count) +{ + int cnt = (count + 3) >> 2; + + if (cnt) { + u32 *buf = data; + + do { + u32 x = readl(reg); + *buf++ = x; + } while (--cnt); + } +} + +static void emac_outblk_32bit(void *reg, void *data, int count) +{ + int cnt = (count + 3) >> 2; + + if (cnt) { + const u32 *buf = data; + + do { + writel(*buf++, reg); + } while (--cnt); + } +} + +/* Read a word from phyxcer */ +static int emac_phy_read(const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* issue the phy address and reg */ + writel(addr << 8 | reg, ®s->mac_madr); + + /* pull up the phy io line */ + writel(0x1, ®s->mac_mcmd); + + /* Wait read complete */ + mdelay(1); + + /* push down the phy io line */ + writel(0x0, ®s->mac_mcmd); + + /* and write data */ + *value = readl(®s->mac_mrdd); + + return 0; +} + +/* Write a word to phyxcer */ +static int emac_phy_write(const char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* issue the phy address and reg */ + writel(addr << 8 | reg, ®s->mac_madr); + + /* pull up the phy io line */ + writel(0x1, ®s->mac_mcmd); + + /* Wait write complete */ + mdelay(1); + + /* push down the phy io line */ + writel(0x0, ®s->mac_mcmd); + + /* and write data */ + writel(value, ®s->mac_mwtd); + + return 0; +} + +static void emac_setup(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + u32 reg_val; + u16 phy_val; + u32 duplex_flag; + + /* Set up TX */ + writel(EMAC_TX_SETUP, ®s->tx_mode); + + /* Set up RX */ + writel(EMAC_RX_SETUP, ®s->rx_ctl); + + /* Set MAC */ + /* Set MAC CTL0 */ + writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0); + + /* Set MAC CTL1 */ + emac_phy_read(dev->name, 1, 0, &phy_val); + debug("PHY SETUP, reg 0 value: %x\n", phy_val); + duplex_flag = !!(phy_val & (1 << 8)); + + reg_val = 0; + if (duplex_flag) + reg_val = (0x1 << 0); + writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1); + + /* Set up IPGT */ + writel(EMAC_MAC_IPGT, ®s->mac_ipgt); + + /* Set up IPGR */ + writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr); + + /* Set up Collison window */ + writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt); + + /* Set up Max Frame Length */ + writel(EMAC_MAC_MFL, ®s->mac_maxf); +} + +static void emac_reset(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + debug("resetting device\n"); + + /* RESET device */ + writel(0, ®s->ctl); + udelay(200); + + writel(1, ®s->ctl); + udelay(200); +} + +static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + struct emac_eth_dev *priv = dev->priv; + u16 phy_reg; + + /* Init EMAC */ + + /* Flush RX FIFO */ + setbits_le32(®s->rx_ctl, 0x8); + udelay(1); + + /* Init MAC */ + + /* Soft reset MAC */ + clrbits_le32(®s->mac_ctl0, 0x1 << 15); + + /* Clear RX counter */ + writel(0x0, ®s->rx_fbc); + udelay(1); + + /* Set up EMAC */ + emac_setup(dev); + + writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 | + dev->enetaddr[2], ®s->mac_a1); + writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 | + dev->enetaddr[5], ®s->mac_a0); + + mdelay(1); + + emac_reset(dev); + + /* PHY POWER UP */ + emac_phy_read(dev->name, 1, 0, &phy_reg); + emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11))); + mdelay(1); + + emac_phy_read(dev->name, 1, 0, &phy_reg); + + priv->speed = miiphy_speed(dev->name, 0); + priv->duplex = miiphy_duplex(dev->name, 0); + + /* Print link status only once */ + if (!priv->link_printed) { + printf("ENET Speed is %d Mbps - %s duplex connection\n", + priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); + priv->link_printed = 1; + } + + /* Set EMAC SPEED depend on PHY */ + clrsetbits_le32(®s->mac_supp, 1 << 8, + ((phy_reg & (0x1 << 13)) >> 13) << 8); + + /* Set duplex depend on phy */ + clrsetbits_le32(®s->mac_ctl1, 1 << 0, + ((phy_reg & (0x1 << 8)) >> 8) << 0); + + /* Enable RX/TX */ + setbits_le32(®s->ctl, 0x7); + + return 0; +} + +static void sunxi_emac_eth_halt(struct eth_device *dev) +{ + /* Nothing to do here */ +} + +static int sunxi_emac_eth_recv(struct eth_device *dev) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + struct emac_rxhdr rxhdr; + u32 rxcount; + u32 reg_val; + int rx_len; + int rx_status; + int good_packet; + + /* Check packet ready or not */ + + /* Race warning: The first packet might arrive with + * the interrupts disabled, but the second will fix + */ + rxcount = readl(®s->rx_fbc); + if (!rxcount) { + /* Had one stuck? */ + rxcount = readl(®s->rx_fbc); + if (!rxcount) + return 0; + } + + reg_val = readl(®s->rx_io_data); + if (reg_val != 0x0143414d) { + /* Disable RX */ + clrbits_le32(®s->ctl, 0x1 << 2); + + /* Flush RX FIFO */ + setbits_le32(®s->rx_ctl, 0x1 << 3); + while (readl(®s->rx_ctl) & (0x1 << 3)) + ; + + /* Enable RX */ + setbits_le32(®s->ctl, 0x1 << 2); + + return 0; + } + + /* A packet ready now + * Get status/length + */ + good_packet = 1; + + emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr)); + + rx_len = rxhdr.rx_len; + rx_status = rxhdr.rx_status; + + /* Packet Status check */ + if (rx_len < 0x40) { + good_packet = 0; + debug("RX: Bad Packet (runt)\n"); + } + + /* rx_status is identical to RSR register. */ + if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) { + good_packet = 0; + if (rx_status & EMAC_CRCERR) + printf("crc error\n"); + if (rx_status & EMAC_LENERR) + printf("length error\n"); + } + + /* Move data from EMAC */ + if (good_packet) { + if (rx_len > DMA_CPU_TRRESHOLD) { + printf("Received packet is too big (len=%d)\n", rx_len); + } else { + emac_inblk_32bit((void *)®s->rx_io_data, + NetRxPackets[0], rx_len); + + /* Pass to upper layer */ + NetReceive(NetRxPackets[0], rx_len); + return rx_len; + } + } + + return 0; +} + +static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len) +{ + struct emac_regs *regs = (struct emac_regs *)dev->iobase; + + /* Select channel 0 */ + writel(0, ®s->tx_ins); + + /* Write packet */ + emac_outblk_32bit((void *)®s->tx_io_data, packet, len); + + /* Set TX len */ + writel(len, ®s->tx_pl0); + + /* Start translate from fifo to phy */ + setbits_le32(®s->tx_ctl0, 1); + + return 0; +} + +int sunxi_emac_initialize(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_sramc_regs *sram = + (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; + struct emac_regs *regs = + (struct emac_regs *)SUNXI_EMAC_BASE; + struct eth_device *dev; + struct emac_eth_dev *priv; + int pin; + + dev = malloc(sizeof(*dev)); + if (dev == NULL) + return -ENOMEM; + + priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev)); + if (!priv) { + free(dev); + return -ENOMEM; + } + + memset(dev, 0, sizeof(*dev)); + memset(priv, 0, sizeof(struct emac_eth_dev)); + + /* Map SRAM to EMAC */ + setbits_le32(&sram->ctrl1, 0x5 << 2); + + /* Configure pin mux settings for MII Ethernet */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) + sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC); + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC); + + /* Set MII clock */ + clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); + + dev->iobase = (int)regs; + dev->priv = priv; + dev->init = sunxi_emac_eth_init; + dev->halt = sunxi_emac_eth_halt; + dev->send = sunxi_emac_eth_send; + dev->recv = sunxi_emac_eth_recv; + strcpy(dev->name, "emac"); + + eth_register(dev); + + miiphy_register(dev->name, emac_phy_read, emac_phy_write); + + return 0; +} |