diff options
Diffstat (limited to 'drivers/net/smc911x.c')
| -rw-r--r-- | drivers/net/smc911x.c | 444 |
1 files changed, 442 insertions, 2 deletions
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 18a729c..5c00028 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -3,6 +3,8 @@ * * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> * + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -35,13 +37,427 @@ u32 pkt_data_pull(struct eth_device *dev, u32 addr) \ void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \ __attribute__ ((weak, alias ("smc911x_reg_write"))); +#if defined (CONFIG_DRIVER_SMC911X_32_BIT) +static inline u32 smc911x_reg_read(u32 addr) +{ + return *(volatile u32*)addr; +} +static inline void smc911x_reg_write(u32 addr, u32 val) +{ + *(volatile u32*)addr = val; +} +#elif defined (CONFIG_DRIVER_SMC911X_16_BIT) +static inline u32 smc911x_reg_read(u32 addr) +{ + volatile u16 *addr_16 = (u16 *)addr; + return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16)); +} + +static inline void smc911x_reg_write(u32 addr, u32 val) +{ + *(volatile u16*)addr = (u16)val; + *(volatile u16*)(addr + 2) = (u16)(val >> 16); +} +#else +#error "SMC911X: undefined bus width" +#endif /* CONFIG_DRIVER_SMC911X_16_BIT */ + #define mdelay(n) udelay((n)*1000) static void smx911x_handle_mac_address(struct eth_device *dev) +/* Below are the register offsets and bit definitions + * of the Lan911x memory space + */ +#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00) + +#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20) +#define TX_CMD_A_INT_ON_COMP 0x80000000 +#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000 +#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000 +#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000 +#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000 +#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000 +#define TX_CMD_A_INT_FIRST_SEG 0x00002000 +#define TX_CMD_A_INT_LAST_SEG 0x00001000 +#define TX_CMD_A_BUF_SIZE 0x000007FF +#define TX_CMD_B_PKT_TAG 0xFFFF0000 +#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000 +#define TX_CMD_B_DISABLE_PADDING 0x00001000 +#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF + +#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40) +#define RX_STS_PKT_LEN 0x3FFF0000 +#define RX_STS_ES 0x00008000 +#define RX_STS_BCST 0x00002000 +#define RX_STS_LEN_ERR 0x00001000 +#define RX_STS_RUNT_ERR 0x00000800 +#define RX_STS_MCAST 0x00000400 +#define RX_STS_TOO_LONG 0x00000080 +#define RX_STS_COLL 0x00000040 +#define RX_STS_ETH_TYPE 0x00000020 +#define RX_STS_WDOG_TMT 0x00000010 +#define RX_STS_MII_ERR 0x00000008 +#define RX_STS_DRIBBLING 0x00000004 +#define RX_STS_CRC_ERR 0x00000002 +#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44) +#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48) +#define TX_STS_TAG 0xFFFF0000 +#define TX_STS_ES 0x00008000 +#define TX_STS_LOC 0x00000800 +#define TX_STS_NO_CARR 0x00000400 +#define TX_STS_LATE_COLL 0x00000200 +#define TX_STS_MANY_COLL 0x00000100 +#define TX_STS_COLL_CNT 0x00000078 +#define TX_STS_MANY_DEFER 0x00000004 +#define TX_STS_UNDERRUN 0x00000002 +#define TX_STS_DEFERRED 0x00000001 +#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C) +#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50) +#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */ +#define ID_REV_REV_ID 0x0000FFFF /* RO */ + +#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54) +#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */ +#define INT_CFG_INT_DEAS_CLR 0x00004000 +#define INT_CFG_INT_DEAS_STS 0x00002000 +#define INT_CFG_IRQ_INT 0x00001000 /* RO */ +#define INT_CFG_IRQ_EN 0x00000100 /* R/W */ +#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */ + +#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58) +#define INT_STS_SW_INT 0x80000000 /* R/WC */ +#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */ +#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */ +#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */ +#define INT_STS_RXDF_INT 0x00400000 /* R/WC */ +#define INT_STS_TX_IOC 0x00200000 /* R/WC */ +#define INT_STS_RXD_INT 0x00100000 /* R/WC */ +#define INT_STS_GPT_INT 0x00080000 /* R/WC */ +#define INT_STS_PHY_INT 0x00040000 /* RO */ +#define INT_STS_PME_INT 0x00020000 /* R/WC */ +#define INT_STS_TXSO 0x00010000 /* R/WC */ +#define INT_STS_RWT 0x00008000 /* R/WC */ +#define INT_STS_RXE 0x00004000 /* R/WC */ +#define INT_STS_TXE 0x00002000 /* R/WC */ +/*#define INT_STS_ERX 0x00001000*/ /* R/WC */ +#define INT_STS_TDFU 0x00000800 /* R/WC */ +#define INT_STS_TDFO 0x00000400 /* R/WC */ +#define INT_STS_TDFA 0x00000200 /* R/WC */ +#define INT_STS_TSFF 0x00000100 /* R/WC */ +#define INT_STS_TSFL 0x00000080 /* R/WC */ +/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */ +#define INT_STS_RDFO 0x00000040 /* R/WC */ +#define INT_STS_RDFL 0x00000020 /* R/WC */ +#define INT_STS_RSFF 0x00000010 /* R/WC */ +#define INT_STS_RSFL 0x00000008 /* R/WC */ +#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */ +#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */ +#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */ +#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C) +#define INT_EN_SW_INT_EN 0x80000000 /* R/W */ +#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */ +#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */ +#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */ +/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */ +#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */ +#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */ +#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */ +#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */ +#define INT_EN_PME_INT_EN 0x00020000 /* R/W */ +#define INT_EN_TXSO_EN 0x00010000 /* R/W */ +#define INT_EN_RWT_EN 0x00008000 /* R/W */ +#define INT_EN_RXE_EN 0x00004000 /* R/W */ +#define INT_EN_TXE_EN 0x00002000 /* R/W */ +/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */ +#define INT_EN_TDFU_EN 0x00000800 /* R/W */ +#define INT_EN_TDFO_EN 0x00000400 /* R/W */ +#define INT_EN_TDFA_EN 0x00000200 /* R/W */ +#define INT_EN_TSFF_EN 0x00000100 /* R/W */ +#define INT_EN_TSFL_EN 0x00000080 /* R/W */ +/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */ +#define INT_EN_RDFO_EN 0x00000040 /* R/W */ +#define INT_EN_RDFL_EN 0x00000020 /* R/W */ +#define INT_EN_RSFF_EN 0x00000010 /* R/W */ +#define INT_EN_RSFL_EN 0x00000008 /* R/W */ +#define INT_EN_GPIO2_INT 0x00000004 /* R/W */ +#define INT_EN_GPIO1_INT 0x00000002 /* R/W */ +#define INT_EN_GPIO0_INT 0x00000001 /* R/W */ + +#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64) +#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68) +#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */ +#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */ +#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */ + +#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C) +#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */ +#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */ +#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */ +#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */ +#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */ +#define RX_CFG_RX_DUMP 0x00008000 /* R/W */ +#define RX_CFG_RXDOFF 0x00001F00 /* R/W */ +/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */ + +#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70) +/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */ +/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */ +#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */ +#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */ +#define TX_CFG_TXSAO 0x00000004 /* R/W */ +#define TX_CFG_TX_ON 0x00000002 /* R/W */ +#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */ + +#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74) +#define HW_CFG_TTM 0x00200000 /* R/W */ +#define HW_CFG_SF 0x00100000 /* R/W */ +#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */ +#define HW_CFG_TR 0x00003000 /* R/W */ +#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */ +#define HW_CFG_SMI_SEL 0x00000010 /* R/W */ +#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */ +#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */ +#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */ +#define HW_CFG_SRST_TO 0x00000002 /* RO */ +#define HW_CFG_SRST 0x00000001 /* Self Clearing */ + +#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78) +#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */ + +#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C) +#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */ +#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */ + +#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80) +#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */ +#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */ + +#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84) +#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */ +#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */ +#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */ +#define PMT_CTRL_ED_EN 0x00000100 /* R/W */ +#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_WUPS 0x00000030 /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */ +#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */ +#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */ +#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */ +#define PMT_CTRL_PME_IND 0x00000008 /* R/W */ +#define PMT_CTRL_PME_POL 0x00000004 /* R/W */ +#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_READY 0x00000001 /* RO */ + +#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88) +#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */ +#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */ +#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */ +#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */ +#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */ +#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */ +#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */ +#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */ +#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */ +#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */ +#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */ +#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */ +#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */ +#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */ +#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */ + +#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C) +#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */ +#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */ + +#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90) +#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */ + +#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98) +#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C) +#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0) +#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4) +#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */ + +#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8) +#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC) +#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */ +#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */ +#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */ +#define AFC_CFG_FCMULT 0x00000008 /* R/W */ +#define AFC_CFG_FCBRD 0x00000004 /* R/W */ +#define AFC_CFG_FCADD 0x00000002 /* R/W */ +#define AFC_CFG_FCANY 0x00000001 /* R/W */ + +#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0) +#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */ +#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */ +#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */ +#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */ +#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */ + +#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4) +#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */ +/* end of LAN register offsets and bit definitions */ + +/* MAC Control and Status registers */ +#define MAC_CR 0x01 /* R/W */ + +/* MAC_CR - MAC Control Register */ +#define MAC_CR_RXALL 0x80000000 +/* TODO: delete this bit? It is not described in the data sheet. */ +#define MAC_CR_HBDIS 0x10000000 +#define MAC_CR_RCVOWN 0x00800000 +#define MAC_CR_LOOPBK 0x00200000 +#define MAC_CR_FDPX 0x00100000 +#define MAC_CR_MCPAS 0x00080000 +#define MAC_CR_PRMS 0x00040000 +#define MAC_CR_INVFILT 0x00020000 +#define MAC_CR_PASSBAD 0x00010000 +#define MAC_CR_HFILT 0x00008000 +#define MAC_CR_HPFILT 0x00002000 +#define MAC_CR_LCOLL 0x00001000 +#define MAC_CR_BCAST 0x00000800 +#define MAC_CR_DISRTY 0x00000400 +#define MAC_CR_PADSTR 0x00000100 +#define MAC_CR_BOLMT_MASK 0x000000C0 +#define MAC_CR_DFCHK 0x00000020 +#define MAC_CR_TXEN 0x00000008 +#define MAC_CR_RXEN 0x00000004 + +#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */ +#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */ +#define HASHH 0x04 /* R/W */ +#define HASHL 0x05 /* R/W */ + +#define MII_ACC 0x06 /* R/W */ +#define MII_ACC_PHY_ADDR 0x0000F800 +#define MII_ACC_MIIRINDA 0x000007C0 +#define MII_ACC_MII_WRITE 0x00000002 +#define MII_ACC_MII_BUSY 0x00000001 + +#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */ + +#define FLOW 0x08 /* R/W */ +#define FLOW_FCPT 0xFFFF0000 +#define FLOW_FCPASS 0x00000004 +#define FLOW_FCEN 0x00000002 +#define FLOW_FCBSY 0x00000001 + +#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1 0x0000ffff + +#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2 0x0000ffff + +#define WUFF 0x0B /* WO */ + +#define WUCSR 0x0C /* R/W */ +#define WUCSR_GUE 0x00000200 +#define WUCSR_WUFR 0x00000040 +#define WUCSR_MPR 0x00000020 +#define WUCSR_WAKE_EN 0x00000004 +#define WUCSR_MPEN 0x00000002 + +/* Chip ID values */ +#define CHIP_9115 0x115 +#define CHIP_9116 0x116 +#define CHIP_9117 0x117 +#define CHIP_9118 0x118 +#define CHIP_9215 0x115a +#define CHIP_9216 0x116a +#define CHIP_9217 0x117a +#define CHIP_9218 0x118a + +struct chip_id { + u16 id; + char *name; +}; + +static const struct chip_id chip_ids[] = { + { CHIP_9115, "LAN9115" }, + { CHIP_9116, "LAN9116" }, + { CHIP_9117, "LAN9117" }, + { CHIP_9118, "LAN9118" }, + { CHIP_9215, "LAN9215" }, + { CHIP_9216, "LAN9216" }, + { CHIP_9217, "LAN9217" }, + { CHIP_9218, "LAN9218" }, + { 0, NULL }, +}; + +#define DRIVERNAME "smc911x" + +u32 smc911x_get_mac_csr(u8 reg) +{ + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; + reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; + + return reg_read(MAC_CSR_DATA); +} + +void smc911x_set_mac_csr(u8 reg, u32 data) +{ + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; + reg_write(MAC_CSR_DATA, data); + reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; +} + +static int smx911x_handle_mac_address(struct eth_device *dev) { unsigned long addrh, addrl; uchar *m = dev->enetaddr; + /* if the environment has a valid mac address then use it */ + if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) { + addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24; + addrh = m[4] | m[5] << 8; + smc911x_set_mac_csr(ADDRH, addrh); + smc911x_set_mac_csr(ADDRL, addrl); + } else { + /* if not, try to get one from the eeprom */ + addrh = smc911x_get_mac_csr(ADDRH); + addrl = smc911x_get_mac_csr(ADDRL); + + m[0] = (addrl ) & 0xff; + m[1] = (addrl >> 8 ) & 0xff; + m[2] = (addrl >> 16 ) & 0xff; + m[3] = (addrl >> 24 ) & 0xff; + m[4] = (addrh ) & 0xff; + m[5] = (addrh >> 8 ) & 0xff; + + /* we get 0xff when there is no eeprom connected */ + if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) { + printf(DRIVERNAME ": no valid mac address in environment " + "and no eeprom found\n"); + return -1; + } + } + addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24); addrh = m[4] | (m[5] << 8); smc911x_set_mac_csr(dev, ADDRL, addrl); @@ -144,7 +560,11 @@ static void smc911x_enable(struct eth_device *dev) } -static int smc911x_init(struct eth_device *dev, bd_t * bd) +#ifndef CONFIG_NET_MULTI +int eth_init(bd_t *bd) +#else +static int smc911x_init(struct eth_device *dev, bd_t *bd) +#endif { printf(DRIVERNAME ": initializing\n"); @@ -156,7 +576,12 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd) /* Configure the PHY, initialize the link state */ smc911x_phy_configure(dev); - smx911x_handle_mac_address(dev); +#ifndef CONFIG_NET_MULTI + if (smx911x_handle_mac_address(bd->bi_enetaddr)) +#else + if (smx911x_handle_mac_address(dev)) +#endif + goto err_out; /* Turn on Tx + Rx */ smc911x_enable(dev); @@ -167,8 +592,12 @@ err_out: return -1; } +#ifndef CONFIG_NET_MULTI +int eth_send(volatile void *packet, int length) +#else static int smc911x_send(struct eth_device *dev, volatile void *packet, int length) +#endif { u32 *data = (u32*)packet; u32 tmplen; @@ -207,12 +636,20 @@ static int smc911x_send(struct eth_device *dev, return -1; } +#ifndef CONFIG_NET_MULTI +void eth_halt(void) +#else static void smc911x_halt(struct eth_device *dev) +#endif { smc911x_reset(dev); } +#ifndef CONFIG_NET_MULTI +int eth_rx(void) +#else static int smc911x_rx(struct eth_device *dev) +#endif { u32 *data = (u32 *)NetRxPackets[0]; u32 pktlen, tmplen; @@ -239,6 +676,7 @@ static int smc911x_rx(struct eth_device *dev) return 0; } +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) int smc911x_initialize(u8 dev_num, int base_addr) { unsigned long addrl, addrh; @@ -250,6 +688,7 @@ int smc911x_initialize(u8 dev_num, int base_addr) return 0; } memset(dev, 0, sizeof(*dev)); + strcpy(dev->name, DRIVERNAME); dev->iobase = base_addr; @@ -271,3 +710,4 @@ int smc911x_initialize(u8 dev_num, int base_addr) eth_register(dev); return 0; } +#endif |