diff options
Diffstat (limited to 'drivers/net/sk98lin/h')
| -rw-r--r-- | drivers/net/sk98lin/h/skdebug.h | 4 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skdrv2nd.h | 4 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgedrv.h | 18 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgehw.h | 144 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgei2c.h | 10 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgeinit.h | 2 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgepnm2.h | 2 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skgepnmi.h | 417 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/skvpd.h | 12 | ||||
| -rw-r--r-- | drivers/net/sk98lin/h/xmac_ii.h | 14 |
10 files changed, 313 insertions, 314 deletions
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h index cf5b5ad..5feda92 100644 --- a/drivers/net/sk98lin/h/skdebug.h +++ b/drivers/net/sk98lin/h/skdebug.h @@ -73,8 +73,8 @@ #ifdef DEBUG #ifndef SK_DBG_MSG #define SK_DBG_MSG(pAC,comp,cat,arg) \ - if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ - ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ + if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ + ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ SK_DBG_PRINTF arg ; \ } #endif diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index a311827..a55005f 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -283,7 +283,7 @@ struct s_TxD { /* definition of flags in descriptor control field */ -#define RX_CTRL_OWN_BMU UINT32_C(0x80000000) +#define RX_CTRL_OWN_BMU UINT32_C(0x80000000) #define RX_CTRL_STF UINT32_C(0x40000000) #define RX_CTRL_EOF UINT32_C(0x20000000) #define RX_CTRL_EOB_IRQ UINT32_C(0x10000000) @@ -295,7 +295,7 @@ struct s_TxD { #define RX_CTRL_CHECK_CSUM UINT32_C(0x00560000) #define RX_CTRL_LEN_MASK UINT32_C(0x0000FFFF) -#define TX_CTRL_OWN_BMU UINT32_C(0x80000000) +#define TX_CTRL_OWN_BMU UINT32_C(0x80000000) #define TX_CTRL_STF UINT32_C(0x40000000) #define TX_CTRL_EOF UINT32_C(0x20000000) #define TX_CTRL_EOB_IRQ UINT32_C(0x10000000) diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h index 72ba9ce..9810b39 100644 --- a/drivers/net/sk98lin/h/skgedrv.h +++ b/drivers/net/sk98lin/h/skgedrv.h @@ -58,15 +58,15 @@ * Usually the events are defined by the destination module. * In case of the driver we put the definition of the events here. */ -#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ -#define SK_DRV_NET_UP 2 /* The net is operational */ -#define SK_DRV_NET_DOWN 3 /* The net is down */ -#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ -#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ -#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ -#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ -#define SK_DRV_PORT_FAIL 8 /* One port fails */ +#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ +#define SK_DRV_NET_UP 2 /* The net is operational */ +#define SK_DRV_NET_DOWN 3 /* The net is down */ +#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ +#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ +#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ +#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ +#define SK_DRV_PORT_FAIL 8 /* One port fails */ #define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ -#define SK_DRV_POWER_DOWN 10 /* Power down mode */ +#define SK_DRV_POWER_DOWN 10 /* Power down mode */ #endif /* __INC_SKGEDRV_H_ */ diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h index 2c98427..52dc83f 100644 --- a/drivers/net/sk98lin/h/skgehw.h +++ b/drivers/net/sk98lin/h/skgehw.h @@ -110,10 +110,10 @@ * * Revision 1.29 1999/01/26 08:55:48 malthoff * Bugfix: The 16 bit field relations inside the descriptor are - * endianess dependend if the descriptor reversal feature - * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled. - * Drivers which use this feature has to set the define - * SK_USE_REV_DESC. + * endianess dependend if the descriptor reversal feature + * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled. + * Drivers which use this feature has to set the define + * SK_USE_REV_DESC. * * Revision 1.28 1998/12/10 11:10:22 malthoff * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted. @@ -274,7 +274,7 @@ extern "C" { #define BIT_10S (1 << 10) #define BIT_9S (1 << 9) #define BIT_8S (1 << 8) -#define BIT_7S (1 << 7) +#define BIT_7S (1 << 7) #define BIT_6S (1 << 6) #define BIT_5S (1 << 5) #define BIT_4S (1 << 4) @@ -340,27 +340,27 @@ extern "C" { #define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ #define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ #define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ -#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ +#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ /* Byte 35..3b: reserved */ #define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ #define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ #define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ #define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ /* Device Dependent Region */ -#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ -#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ +#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ +#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ /* Power Management Region */ -#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ -#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ -#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ -#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ +#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ +#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ +#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ +#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ /* Byte 0x4e: reserved */ -#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ +#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ /* VPD Region */ -#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ -#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ -#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ -#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ +#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ +#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ +#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ +#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ /* Byte 0x58..0xff: reserved */ /* @@ -530,7 +530,7 @@ extern "C" { #define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ #define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ #define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ -#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ +#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ /* VPD Region */ /* PCI_VPD_ADR_REG 16 bit VPD Address Register */ @@ -602,7 +602,7 @@ extern "C" { #define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ #define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ #define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ -#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ +#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ /* Eprom registers are currently of no use */ #define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ #define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ @@ -623,7 +623,7 @@ extern "C" { #define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ #define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ #define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ -#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ +#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ #define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ /* 0x0154 - 0x0157: reserved */ #define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ @@ -805,7 +805,7 @@ extern "C" { * use MR_ADDR() to access */ #define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ -#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ +#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ /* 0x0c08 - 0x0c0b: reserved */ #define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ #define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ @@ -837,13 +837,13 @@ extern "C" { #define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ #define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ /* 0x0c54 - 0x0c5f: reserved */ -#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ +#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ /* 0x0c64 - 0x0c67: reserved */ -#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ +#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ /* 0x0c6c - 0x0c6f: reserved */ -#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ +#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ /* 0x0c74 - 0x0c77: reserved */ -#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ +#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ /* 0x0c7c - 0x0c7f: reserved */ /* @@ -860,7 +860,7 @@ extern "C" { * use MR_ADDR() to access */ #define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ -#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ +#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ #define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ #define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ #define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ @@ -883,13 +883,13 @@ extern "C" { #define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ #define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ /* 0x0d4c - 0x0d5f: reserved */ -#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ -#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ -#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ +#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ +#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ /* 0x0d6c - 0x0d6f: reserved */ -#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ -#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ -#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ +#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ +#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ +#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ /* 0x0d7c - 0x0d7f: reserved */ /* @@ -1039,8 +1039,8 @@ extern "C" { /* B0_ISRC 32 bit Interrupt Source Register */ /* B0_IMSK 32 bit Interrupt Mask Register */ /* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ -/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ -#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */ +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */ #define IS_HW_ERR BIT_31 /* Interrupt HW Error */ /* Bit 30: reserved */ #define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ @@ -1085,7 +1085,7 @@ extern "C" { /* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ /* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ /* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ -#define IS_ERR_MSK 0x00000fffL /* All Error bits */ +#define IS_ERR_MSK 0x00000fffL /* All Error bits */ /* Bit 31..14: reserved */ #define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ #define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ @@ -1112,7 +1112,7 @@ extern "C" { #define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ #define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/ -/* B2_CHIP_ID 8 bit Chip Identification Number */ +/* B2_CHIP_ID 8 bit Chip Identification Number */ #define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ #define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ @@ -1157,7 +1157,7 @@ extern "C" { #define DPT_START BIT_1S /* Start Descriptor Poll Timer */ #define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ -/* B2_E_3 8 bit lower 4 bits used for HW self test result */ +/* B2_E_3 8 bit lower 4 bits used for HW self test result */ #define B2_E3_RES_MASK 0x0f /* B2_TST_CTRL1 8 bit Test Control Register 1 */ @@ -1210,7 +1210,7 @@ extern "C" { #define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ #define I2C_DEV_SIZE (7L<<1) /* Bit 3.. 1: I2C Device Size */ #define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smal. */ -#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */ +#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */ #define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */ #define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */ #define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */ @@ -1417,7 +1417,7 @@ extern "C" { #define F_WM_REACHED BIT_25 /* Watermark reached */ /* reserved */ #define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ - /* Bit 15..11: reserved */ + /* Bit 15..11: reserved */ #define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ /* Q_T1 32 bit Test Register 1 */ @@ -1501,12 +1501,12 @@ extern "C" { /* Receive and Transmit MAC FIFO Registers (GENESIS only) */ /* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ -/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ +/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ /* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ /* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ /* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ /* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ -/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ +/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ /* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ /* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ /* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ @@ -1553,8 +1553,8 @@ extern "C" { #define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) -/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ -/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ /* Bit 7: reserved */ #define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */ #define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */ @@ -1564,8 +1564,8 @@ extern "C" { #define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ #define MFF_PC_INC BIT_0S /* Packet Counter Increment */ -/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ -/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ /* Bit 7: reserved */ #define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ #define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ @@ -1593,7 +1593,7 @@ extern "C" { #define LED_START BIT_2S /* Start Timer */ #define LED_STOP BIT_1S /* Stop Timer */ #define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */ -#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ +#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ /* RX_LED_TST 8 bit Receive LED Cnt Test Register */ /* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ @@ -1603,7 +1603,7 @@ extern "C" { #define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ #define LED_T_STEP BIT_0S /* LED Counter Step */ -/* LNK_LED_REG 8 bit Link LED Register */ +/* LNK_LED_REG 8 bit Link LED Register */ /* Bit 7.. 6: reserved */ #define LED_BLK_ON BIT_5S /* Link LED Blinking On */ #define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ @@ -1616,18 +1616,18 @@ extern "C" { /* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ /* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ -/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ -/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ -/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ -/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ +/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ +/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ +/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ +/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ /* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ /* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ -/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ -/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ -/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ -/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ -/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ -/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ +/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ +/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ +/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ +/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ +/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ /* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ /* Bits 31..15: reserved */ @@ -2211,11 +2211,11 @@ typedef struct s_HwRxd { * PHY_WRITE() write a 16 bit value to the PHY * * para: - * IoC I/O context needed for SK I/O macros - * pPort Pointer to port struct for PhyAddr - * Mac XMAC to access values: MAC_1 or MAC_2 - * PhyReg PHY Register to read or write - * (p)Val Value or pointer to the value which should be read or + * IoC I/O context needed for SK I/O macros + * pPort Pointer to port struct for PhyAddr + * Mac XMAC to access values: MAC_1 or MAC_2 + * PhyReg PHY Register to read or write + * (p)Val Value or pointer to the value which should be read or * written. * * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); @@ -2224,26 +2224,26 @@ typedef struct s_HwRxd { */ #ifndef DEBUG #define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ - SK_U16 Mmu; \ + SK_U16 Mmu; \ \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ + do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - } \ + } \ } #else #define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ - SK_U16 Mmu; \ + SK_U16 Mmu; \ int __i = 0; \ \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ + do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ __i++; \ if (__i > 100000) { \ @@ -2254,7 +2254,7 @@ typedef struct s_HwRxd { } \ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - } \ + } \ } #endif /* DEBUG */ @@ -2262,17 +2262,17 @@ typedef struct s_HwRxd { SK_U16 Mmu; \ \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ + do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ - } \ + } \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ + do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ - } \ + } \ } /* diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h index e639f73..78c25f8 100644 --- a/drivers/net/sk98lin/h/skgei2c.h +++ b/drivers/net/sk98lin/h/skgei2c.h @@ -186,7 +186,7 @@ * To watch the statemachine (JS) use the timer in two ways instead of one as hitherto */ #define SK_TIMER_WATCH_STATEMACHINE 0 /* Watch the statemachine to finish in a specific time */ -#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ +#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ /* @@ -200,7 +200,7 @@ #define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ /* VCC which should be 5 V */ -#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ +#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ #define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ #define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ #define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ @@ -270,10 +270,10 @@ /* * ASIC Core 1V5 voltage (YUKON only) */ -#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ +#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ #define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */ #define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */ -#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ +#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ /* * FAN 1 speed @@ -285,7 +285,7 @@ */ #define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ #define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ -#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ +#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ #define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ /* diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h index cdddef9..ef101d7 100644 --- a/drivers/net/sk98lin/h/skgeinit.h +++ b/drivers/net/sk98lin/h/skgeinit.h @@ -486,7 +486,7 @@ extern "C" { /* Link Speed Current State */ #define SK_LSPEED_STAT_UNKNOWN 1 #define SK_LSPEED_STAT_10MBPS 2 -#define SK_LSPEED_STAT_100MBPS 3 +#define SK_LSPEED_STAT_100MBPS 3 #define SK_LSPEED_STAT_1000MBPS 4 #define SK_LSPEED_STAT_INDETERMINATED 5 diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h index 5c44f47..e812f28 100644 --- a/drivers/net/sk98lin/h/skgepnm2.h +++ b/drivers/net/sk98lin/h/skgepnm2.h @@ -248,7 +248,7 @@ typedef struct s_OidTabEntry { enum SK_MACSTATS { SK_PNMI_HTX = 0, SK_PNMI_HTX_OCTET, - SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST, diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h index 7532313..c93e99c 100644 --- a/drivers/net/sk98lin/h/skgepnmi.h +++ b/drivers/net/sk98lin/h/skgepnmi.h @@ -67,7 +67,7 @@ * Changed macro PHYS2INST. Added pAC to Interface * * Revision 1.47 2001/02/07 08:28:23 mkunz - * - Added Oids: OID_SKGE_DIAG_ACTION + * - Added Oids: OID_SKGE_DIAG_ACTION * OID_SKGE_DIAG_RESULT * OID_SKGE_MULTICAST_LIST * OID_SKGE_CURRENT_PACKET_FILTER @@ -253,22 +253,22 @@ /* * Event definitions */ -#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ -#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ -#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ -#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ -#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ -#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ +#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ +#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ +#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ +#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ #define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */ -#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ -#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ +#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ +#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ -#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ -#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ #define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */ #define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */ -#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ -#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets +#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets 1 = single net; 2 = dual net */ #define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */ @@ -276,14 +276,14 @@ /* * Return values */ -#define SK_PNMI_ERR_OK 0 -#define SK_PNMI_ERR_GENERAL 1 +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_GENERAL 1 #define SK_PNMI_ERR_TOO_SHORT 2 #define SK_PNMI_ERR_BAD_VALUE 3 #define SK_PNMI_ERR_READ_ONLY 4 #define SK_PNMI_ERR_UNKNOWN_OID 5 #define SK_PNMI_ERR_UNKNOWN_INST 6 -#define SK_PNMI_ERR_UNKNOWN_NET 7 +#define SK_PNMI_ERR_UNKNOWN_NET 7 /* @@ -329,11 +329,11 @@ */ #ifndef _NDIS_ /* Check, whether NDIS already included OIDs */ -#define OID_GEN_XMIT_OK 0x00020101 -#define OID_GEN_RCV_OK 0x00020102 -#define OID_GEN_XMIT_ERROR 0x00020103 -#define OID_GEN_RCV_ERROR 0x00020104 -#define OID_GEN_RCV_NO_BUFFER 0x00020105 +#define OID_GEN_XMIT_OK 0x00020101 +#define OID_GEN_RCV_OK 0x00020102 +#define OID_GEN_XMIT_ERROR 0x00020103 +#define OID_GEN_RCV_ERROR 0x00020104 +#define OID_GEN_RCV_NO_BUFFER 0x00020105 /* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */ #define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 @@ -342,27 +342,27 @@ /* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */ #define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 /* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */ -#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 +#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 /* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */ #define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A /* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */ #define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C -#define OID_GEN_RCV_CRC_ERROR 0x0002020D +#define OID_GEN_RCV_CRC_ERROR 0x0002020D #define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E -#define OID_802_3_PERMANENT_ADDRESS 0x01010101 -#define OID_802_3_CURRENT_ADDRESS 0x01010102 -/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ +#define OID_802_3_PERMANENT_ADDRESS 0x01010101 +#define OID_802_3_CURRENT_ADDRESS 0x01010102 +/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ /* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ -/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ +/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ #define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 #define OID_802_3_XMIT_ONE_COLLISION 0x01020102 #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 -#define OID_802_3_XMIT_DEFERRED 0x01020201 +#define OID_802_3_XMIT_DEFERRED 0x01020201 #define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 -#define OID_802_3_RCV_OVERRUN 0x01020203 -#define OID_802_3_XMIT_UNDERRUN 0x01020204 +#define OID_802_3_RCV_OVERRUN 0x01020203 +#define OID_802_3_XMIT_UNDERRUN 0x01020204 #define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 #define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 @@ -370,193 +370,193 @@ * PnP and PM OIDs */ #ifdef SK_POWER_MGMT -#define OID_PNP_CAPABILITIES 0xFD010100 -#define OID_PNP_SET_POWER 0xFD010101 -#define OID_PNP_QUERY_POWER 0xFD010102 -#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 +#define OID_PNP_CAPABILITIES 0xFD010100 +#define OID_PNP_SET_POWER 0xFD010101 +#define OID_PNP_QUERY_POWER 0xFD010102 +#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 #define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 -#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 +#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 #endif /* SK_POWER_MGMT */ #endif /* _NDIS_ */ -#define OID_SKGE_MDB_VERSION 0xFF010100 -#define OID_SKGE_SUPPORTED_LIST 0xFF010101 -#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 -#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 -#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 -#define OID_SKGE_VPD_KEY 0xFF010105 -#define OID_SKGE_VPD_VALUE 0xFF010106 -#define OID_SKGE_VPD_ACCESS 0xFF010107 -#define OID_SKGE_VPD_ACTION 0xFF010108 - -#define OID_SKGE_PORT_NUMBER 0xFF010110 -#define OID_SKGE_DEVICE_TYPE 0xFF010111 -#define OID_SKGE_DRIVER_DESCR 0xFF010112 -#define OID_SKGE_DRIVER_VERSION 0xFF010113 -#define OID_SKGE_HW_DESCR 0xFF010114 -#define OID_SKGE_HW_VERSION 0xFF010115 -#define OID_SKGE_CHIPSET 0xFF010116 -#define OID_SKGE_ACTION 0xFF010117 -#define OID_SKGE_RESULT 0xFF010118 -#define OID_SKGE_BUS_TYPE 0xFF010119 -#define OID_SKGE_BUS_SPEED 0xFF01011A -#define OID_SKGE_BUS_WIDTH 0xFF01011B +#define OID_SKGE_MDB_VERSION 0xFF010100 +#define OID_SKGE_SUPPORTED_LIST 0xFF010101 +#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 +#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 +#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 +#define OID_SKGE_VPD_KEY 0xFF010105 +#define OID_SKGE_VPD_VALUE 0xFF010106 +#define OID_SKGE_VPD_ACCESS 0xFF010107 +#define OID_SKGE_VPD_ACTION 0xFF010108 + +#define OID_SKGE_PORT_NUMBER 0xFF010110 +#define OID_SKGE_DEVICE_TYPE 0xFF010111 +#define OID_SKGE_DRIVER_DESCR 0xFF010112 +#define OID_SKGE_DRIVER_VERSION 0xFF010113 +#define OID_SKGE_HW_DESCR 0xFF010114 +#define OID_SKGE_HW_VERSION 0xFF010115 +#define OID_SKGE_CHIPSET 0xFF010116 +#define OID_SKGE_ACTION 0xFF010117 +#define OID_SKGE_RESULT 0xFF010118 +#define OID_SKGE_BUS_TYPE 0xFF010119 +#define OID_SKGE_BUS_SPEED 0xFF01011A +#define OID_SKGE_BUS_WIDTH 0xFF01011B /* 0xFF01011C unused */ -#define OID_SKGE_DIAG_ACTION 0xFF01011D -#define OID_SKGE_DIAG_RESULT 0xFF01011E -#define OID_SKGE_MTU 0xFF01011F -#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 -#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 -#define OID_SKGE_PMD 0xFF010122 -#define OID_SKGE_CONNECTOR 0xFF010123 -#define OID_SKGE_LINK_CAP 0xFF010124 -#define OID_SKGE_LINK_MODE 0xFF010125 -#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 -#define OID_SKGE_LINK_STATUS 0xFF010127 -#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 -#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 -#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A -#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B -#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C +#define OID_SKGE_DIAG_ACTION 0xFF01011D +#define OID_SKGE_DIAG_RESULT 0xFF01011E +#define OID_SKGE_MTU 0xFF01011F +#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 +#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 +#define OID_SKGE_PMD 0xFF010122 +#define OID_SKGE_CONNECTOR 0xFF010123 +#define OID_SKGE_LINK_CAP 0xFF010124 +#define OID_SKGE_LINK_MODE 0xFF010125 +#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 +#define OID_SKGE_LINK_STATUS 0xFF010127 +#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 +#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 +#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A +#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B +#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C #define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D -#define OID_SKGE_MULTICAST_LIST 0xFF01012E +#define OID_SKGE_MULTICAST_LIST 0xFF01012E #define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F -#define OID_SKGE_TRAP 0xFF010130 -#define OID_SKGE_TRAP_NUMBER 0xFF010131 +#define OID_SKGE_TRAP 0xFF010130 +#define OID_SKGE_TRAP_NUMBER 0xFF010131 -#define OID_SKGE_RLMT_MODE 0xFF010140 -#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 -#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 +#define OID_SKGE_RLMT_MODE 0xFF010140 +#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 +#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 #define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143 #define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160 -#define OID_SKGE_SPEED_CAP 0xFF010170 -#define OID_SKGE_SPEED_MODE 0xFF010171 -#define OID_SKGE_SPEED_STATUS 0xFF010172 +#define OID_SKGE_SPEED_CAP 0xFF010170 +#define OID_SKGE_SPEED_MODE 0xFF010171 +#define OID_SKGE_SPEED_STATUS 0xFF010172 -#define OID_SKGE_SENSOR_NUMBER 0xFF020100 -#define OID_SKGE_SENSOR_INDEX 0xFF020101 -#define OID_SKGE_SENSOR_DESCR 0xFF020102 -#define OID_SKGE_SENSOR_TYPE 0xFF020103 -#define OID_SKGE_SENSOR_VALUE 0xFF020104 +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_INDEX 0xFF020101 +#define OID_SKGE_SENSOR_DESCR 0xFF020102 +#define OID_SKGE_SENSOR_TYPE 0xFF020103 +#define OID_SKGE_SENSOR_VALUE 0xFF020104 #define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105 #define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106 #define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107 #define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108 -#define OID_SKGE_SENSOR_STATUS 0xFF020109 -#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A -#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B -#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C -#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D - -#define OID_SKGE_CHKSM_NUMBER 0xFF020110 -#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 +#define OID_SKGE_SENSOR_STATUS 0xFF020109 +#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A +#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B +#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C +#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D + +#define OID_SKGE_CHKSM_NUMBER 0xFF020110 +#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 #define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112 -#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 -#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 +#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 +#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 #define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115 -#define OID_SKGE_STAT_TX 0xFF020120 -#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 -#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 -#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 -#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 -#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 -#define OID_SKGE_STAT_TX_BURST 0xFF020126 -#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 -#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 -#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 -#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A -#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B -#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C -#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D -#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E -#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F -#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 -/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ -#define OID_SKGE_STAT_TX_64 0xFF020132 -#define OID_SKGE_STAT_TX_127 0xFF020133 -#define OID_SKGE_STAT_TX_255 0xFF020134 -#define OID_SKGE_STAT_TX_511 0xFF020135 -#define OID_SKGE_STAT_TX_1023 0xFF020136 -#define OID_SKGE_STAT_TX_MAX 0xFF020137 -#define OID_SKGE_STAT_TX_SYNC 0xFF020138 +#define OID_SKGE_STAT_TX 0xFF020120 +#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 +#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 +#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 +#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 +#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 +#define OID_SKGE_STAT_TX_BURST 0xFF020126 +#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 +#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 +#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 +#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A +#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B +#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C +#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D +#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E +#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F +#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 +/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ +#define OID_SKGE_STAT_TX_64 0xFF020132 +#define OID_SKGE_STAT_TX_127 0xFF020133 +#define OID_SKGE_STAT_TX_255 0xFF020134 +#define OID_SKGE_STAT_TX_511 0xFF020135 +#define OID_SKGE_STAT_TX_1023 0xFF020136 +#define OID_SKGE_STAT_TX_MAX 0xFF020137 +#define OID_SKGE_STAT_TX_SYNC 0xFF020138 #define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139 -#define OID_SKGE_STAT_RX 0xFF02013A -#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B -#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C -#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D -#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E -#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F -#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 -#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 +#define OID_SKGE_STAT_RX 0xFF02013A +#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B +#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C +#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D +#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E +#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F +#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 +#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 #define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142 -#define OID_SKGE_STAT_RX_BURST 0xFF020143 -#define OID_SKGE_STAT_RX_MISSED 0xFF020144 -#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 -#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 -#define OID_SKGE_STAT_RX_JABBER 0xFF020147 -#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 -#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 -#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A -#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B -#define OID_SKGE_STAT_RX_RUNT 0xFF02014C -#define OID_SKGE_STAT_RX_CEXT 0xFF02014D -#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E -#define OID_SKGE_STAT_RX_FCS 0xFF02014F -/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ -#define OID_SKGE_STAT_RX_64 0xFF020151 -#define OID_SKGE_STAT_RX_127 0xFF020152 -#define OID_SKGE_STAT_RX_255 0xFF020153 -#define OID_SKGE_STAT_RX_511 0xFF020154 -#define OID_SKGE_STAT_RX_1023 0xFF020155 -#define OID_SKGE_STAT_RX_MAX 0xFF020156 -#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 - -#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 -#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 -#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 -#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 - -#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 -#define OID_SKGE_RLMT_STATUS 0xFF020165 -#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 -#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 -#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 -#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 +#define OID_SKGE_STAT_RX_BURST 0xFF020143 +#define OID_SKGE_STAT_RX_MISSED 0xFF020144 +#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 +#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 +#define OID_SKGE_STAT_RX_JABBER 0xFF020147 +#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 +#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 +#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A +#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B +#define OID_SKGE_STAT_RX_RUNT 0xFF02014C +#define OID_SKGE_STAT_RX_CEXT 0xFF02014D +#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E +#define OID_SKGE_STAT_RX_FCS 0xFF02014F +/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ +#define OID_SKGE_STAT_RX_64 0xFF020151 +#define OID_SKGE_STAT_RX_127 0xFF020152 +#define OID_SKGE_STAT_RX_255 0xFF020153 +#define OID_SKGE_STAT_RX_511 0xFF020154 +#define OID_SKGE_STAT_RX_1023 0xFF020155 +#define OID_SKGE_STAT_RX_MAX 0xFF020156 +#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 + +#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 +#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 +#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 +#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 + +#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 +#define OID_SKGE_RLMT_STATUS 0xFF020165 +#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 +#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 +#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 +#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 #define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150 -#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 -#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 -#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 +#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 +#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 +#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 #define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154 -#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 - -#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 -#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 -#define OID_SKGE_TX_RETRY 0xFF020172 -#define OID_SKGE_RX_INTR_CTS 0xFF020173 -#define OID_SKGE_TX_INTR_CTS 0xFF020174 -#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 -#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 -#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 -#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 +#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 + +#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 +#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 +#define OID_SKGE_TX_RETRY 0xFF020172 +#define OID_SKGE_RX_INTR_CTS 0xFF020173 +#define OID_SKGE_TX_INTR_CTS 0xFF020174 +#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 +#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 +#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 +#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 #define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179 -#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A -#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B -#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C -#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D -#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E -#define OID_SKGE_SYSUPTIME 0xFF02017F +#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A +#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B +#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C +#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D +#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E +#define OID_SKGE_SYSUPTIME 0xFF02017F -#define OID_SKGE_ALL_DATA 0xFF020190 +#define OID_SKGE_ALL_DATA 0xFF020190 /* Defines for VCT. */ -#define OID_SKGE_VCT_GET 0xFF020200 -#define OID_SKGE_VCT_SET 0xFF020201 -#define OID_SKGE_VCT_STATUS 0xFF020202 +#define OID_SKGE_VCT_GET 0xFF020200 +#define OID_SKGE_VCT_SET 0xFF020201 +#define OID_SKGE_VCT_STATUS 0xFF020202 /* VCT struct to store a backup copy of VCT data after a port reset. */ @@ -578,20 +578,20 @@ typedef struct s_PnmiVct { /* VCT cable test status. */ -#define SK_PNMI_VCT_NORMAL_CABLE 0 -#define SK_PNMI_VCT_SHORT_CABLE 1 -#define SK_PNMI_VCT_OPEN_CABLE 2 -#define SK_PNMI_VCT_TEST_FAIL 3 -#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 - -#define OID_SKGE_TRAP_SEN_WAR_LOW 500 -#define OID_SKGE_TRAP_SEN_WAR_UPP 501 -#define OID_SKGE_TRAP_SEN_ERR_LOW 502 -#define OID_SKGE_TRAP_SEN_ERR_UPP 503 +#define SK_PNMI_VCT_NORMAL_CABLE 0 +#define SK_PNMI_VCT_SHORT_CABLE 1 +#define SK_PNMI_VCT_OPEN_CABLE 2 +#define SK_PNMI_VCT_TEST_FAIL 3 +#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 + +#define OID_SKGE_TRAP_SEN_WAR_LOW 500 +#define OID_SKGE_TRAP_SEN_WAR_UPP 501 +#define OID_SKGE_TRAP_SEN_ERR_LOW 502 +#define OID_SKGE_TRAP_SEN_ERR_UPP 503 #define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520 #define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521 #define OID_SKGE_TRAP_RLMT_PORT_DOWN 522 -#define OID_SKGE_TRAP_RLMT_PORT_UP 523 +#define OID_SKGE_TRAP_RLMT_PORT_UP 523 #define OID_SKGE_TRAP_RLMT_SEGMENTATION 524 @@ -775,7 +775,7 @@ typedef struct s_PnmiVct { /* * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct */ -#define SK_PNMI_VPD_KEY_SIZE 5 +#define SK_PNMI_VPD_KEY_SIZE 5 #define SK_PNMI_VPD_BUFSIZE (VPD_SIZE) #define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4) #define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */ @@ -783,12 +783,12 @@ typedef struct s_PnmiVct { #define SK_PNMI_MULTICAST_LISTLEN 64 #define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS) #define SK_PNMI_CHECKSUM_ENTRIES 3 -#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) +#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) #define SK_PNMI_MONITOR_ENTRIES 20 #define SK_PNMI_TRAP_ENTRIES 10 -#define SK_PNMI_TRAPLEN 128 -#define SK_PNMI_STRINGLEN1 80 -#define SK_PNMI_STRINGLEN2 25 +#define SK_PNMI_TRAPLEN 128 +#define SK_PNMI_STRINGLEN1 80 +#define SK_PNMI_STRINGLEN2 25 #define SK_PNMI_TRAP_QUEUE_LEN 512 typedef struct s_PnmiVpd { @@ -992,12 +992,12 @@ typedef struct s_PnmiStrucData { /* * Various definitions */ -#define SK_PNMI_MAX_PROTOS 3 +#define SK_PNMI_MAX_PROTOS 3 -#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum - * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK - * for check while init phase 1 - */ +#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum + * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK + * for check while init phase 1 + */ /* * Estimate data structure @@ -1091,7 +1091,6 @@ typedef struct s_PnmiData { SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS]; } SK_PNMI; - /* * Function prototypes */ diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h index 1be34c5..3159e27 100644 --- a/drivers/net/sk98lin/h/skvpd.h +++ b/drivers/net/sk98lin/h/skvpd.h @@ -126,7 +126,7 @@ * Define READ and WRITE Constants. */ -#define VPD_DEV_ID_GENESIS 0x4300 +#define VPD_DEV_ID_GENESIS 0x4300 #define VPD_SIZE_YUKON 256 #define VPD_SIZE_GENESIS 512 @@ -223,19 +223,19 @@ typedef struct s_vpd_key { if ((pAC)->DgT.DgUseCfgCycle) \ SkPciWriteCfgDWord(pAC,Addr,Val); \ else \ - SK_OUT32(pAC,PCI_C(Addr),Val); \ + SK_OUT32(pAC,PCI_C(Addr),Val); \ } #define VPD_IN8(pAC,Ioc,Addr,pVal) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ + if ((pAC)->DgT.DgUseCfgCycle) \ SkPciReadCfgByte(pAC,Addr,pVal); \ else \ - SK_IN8(pAC,PCI_C(Addr),pVal); \ + SK_IN8(pAC,PCI_C(Addr),pVal); \ } #define VPD_IN16(pAC,Ioc,Addr,pVal) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ + if ((pAC)->DgT.DgUseCfgCycle) \ SkPciReadCfgWord(pAC,Addr,pVal); \ else \ - SK_IN16(pAC,PCI_C(Addr),pVal); \ + SK_IN16(pAC,PCI_C(Addr),pVal); \ } #define VPD_IN32(pAC,Ioc,Addr,pVal) { \ if ((pAC)->DgT.DgUseCfgCycle) \ diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h index 2ef903a..09e21d6 100644 --- a/drivers/net/sk98lin/h/xmac_ii.h +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -237,7 +237,7 @@ extern "C" { #define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */ #define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */ #define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */ - /* 0x003c: reserved */ + /* 0x003c: reserved */ #define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */ #define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */ #define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */ @@ -248,14 +248,14 @@ extern "C" { #define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */ #define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */ #define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */ - /* 0x006e: reserved */ + /* 0x006e: reserved */ #define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */ #define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */ #define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/ #define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */ /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */ - /* use the XM_EXM() macro to address */ + /* use the XM_EXM() macro to address */ #define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */ /* @@ -413,7 +413,7 @@ extern "C" { #define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */ #define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */ #define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */ -#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ +#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ #define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */ #define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */ #define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */ @@ -510,7 +510,7 @@ extern "C" { /* Bit 31..27: reserved */ #define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */ #define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */ - /* extern generated */ + /* extern generated */ #define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */ #define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */ /* intern generated */ @@ -548,7 +548,7 @@ extern "C" { /* Bit 16..6: reserved */ #define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */ #define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */ -#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ +#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ #define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */ #define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */ #define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */ @@ -1316,7 +1316,7 @@ extern "C" { #define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ #define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) -#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ +#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ #define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ #define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ |