diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Makefile | 46 | ||||
| -rw-r--r-- | drivers/net/phy/miiphybb.c | 235 |
2 files changed, 281 insertions, 0 deletions
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile new file mode 100644 index 0000000..4fe3b05 --- /dev/null +++ b/drivers/net/phy/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libphy.a + +COBJS-$(CONFIG_BITBANGMII) += miiphybb.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c new file mode 100644 index 0000000..6446012 --- /dev/null +++ b/drivers/net/phy/miiphybb.c @@ -0,0 +1,235 @@ +/* + * (C) Copyright 2001 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This provides a bit-banged interface to the ethernet MII management + * channel. + */ + +#include <common.h> +#include <ioports.h> +#include <ppc_asm.tmpl> + +/***************************************************************************** + * + * Utility to send the preamble, address, and register (common to read + * and write). + */ +static void miiphy_pre (char read, unsigned char addr, unsigned char reg) +{ + int j; /* counter */ +#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM)) + volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT); +#endif + + /* + * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. + * The IEEE spec says this is a PHY optional requirement. The AMD + * 79C874 requires one after power up and one after a MII communications + * error. This means that we are doing more preambles than we need, + * but it is safer and will be much more robust. + */ + + MDIO_ACTIVE; + MDIO (1); + for (j = 0; j < 32; j++) { + MDC (0); + MIIDELAY; + MDC (1); + MIIDELAY; + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + MDC (0); + MDIO (0); + MIIDELAY; + MDC (1); + MIIDELAY; + MDC (0); + MDIO (1); + MIIDELAY; + MDC (1); + MIIDELAY; + MDC (0); + MDIO (read); + MIIDELAY; + MDC (1); + MIIDELAY; + MDC (0); + MDIO (!read); + MIIDELAY; + MDC (1); + MIIDELAY; + + /* send the PHY address */ + for (j = 0; j < 5; j++) { + MDC (0); + if ((addr & 0x10) == 0) { + MDIO (0); + } else { + MDIO (1); + } + MIIDELAY; + MDC (1); + MIIDELAY; + addr <<= 1; + } + + /* send the register address */ + for (j = 0; j < 5; j++) { + MDC (0); + if ((reg & 0x10) == 0) { + MDIO (0); + } else { + MDIO (1); + } + MIIDELAY; + MDC (1); + MIIDELAY; + reg <<= 1; + } +} + + +/***************************************************************************** + * + * Read a MII PHY register. + * + * Returns: + * 0 on success + */ +int bb_miiphy_read (char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + short rdreg; /* register working value */ + int j; /* counter */ +#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM)) + volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT); +#endif + + miiphy_pre (1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + MDC (0); + MDIO_TRISTATE; + MIIDELAY; + MDC (1); + MIIDELAY; + + /* check the turnaround bit: the PHY should be driving it to zero */ + if (MDIO_READ != 0) { + /* puts ("PHY didn't drive TA low\n"); */ + for (j = 0; j < 32; j++) { + MDC (0); + MIIDELAY; + MDC (1); + MIIDELAY; + } + return (-1); + } + + MDC (0); + MIIDELAY; + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (j = 0; j < 16; j++) { + MDC (1); + MIIDELAY; + rdreg <<= 1; + rdreg |= MDIO_READ; + MDC (0); + MIIDELAY; + } + + MDC (1); + MIIDELAY; + MDC (0); + MIIDELAY; + MDC (1); + MIIDELAY; + + *value = rdreg; + +#ifdef DEBUG + printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value); +#endif + + return 0; +} + + +/***************************************************************************** + * + * Write a MII PHY register. + * + * Returns: + * 0 on success + */ +int bb_miiphy_write (char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + int j; /* counter */ +#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM)) + volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT); +#endif + + miiphy_pre (0, addr, reg); + + /* send the turnaround (10) */ + MDC (0); + MDIO (1); + MIIDELAY; + MDC (1); + MIIDELAY; + MDC (0); + MDIO (0); + MIIDELAY; + MDC (1); + MIIDELAY; + + /* write 16 bits of register data, MSB first */ + for (j = 0; j < 16; j++) { + MDC (0); + if ((value & 0x00008000) == 0) { + MDIO (0); + } else { + MDIO (1); + } + MIIDELAY; + MDC (1); + MIIDELAY; + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + MDIO_TRISTATE; + MDC (0); + MIIDELAY; + MDC (1); + MIIDELAY; + + return 0; +} |