diff options
Diffstat (limited to 'drivers/net/npe/IxNpeMhConfig.c')
| -rw-r--r-- | drivers/net/npe/IxNpeMhConfig.c | 608 |
1 files changed, 608 insertions, 0 deletions
diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c new file mode 100644 index 0000000..50c8f21 --- /dev/null +++ b/drivers/net/npe/IxNpeMhConfig.c @@ -0,0 +1,608 @@ +/** + * @file IxNpeMhConfig.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for the + * Configuration module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ + +#include "IxOsal.h" + +#include "IxNpeMhMacros_p.h" + +#include "IxNpeMhConfig_p.h" + +/* + * #defines and macros used in this file. + */ +#define IX_NPE_MH_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of + * retries before + * timeout + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhConfigStats + * + * @brief This structure is used to maintain statistics for the + * Configuration module. + */ + +typedef struct +{ + UINT32 outFifoReads; /**< outFifo reads */ + UINT32 inFifoWrites; /**< inFifo writes */ + UINT32 maxInFifoFullRetries; /**< max retries if inFIFO full */ + UINT32 maxOutFifoEmptyRetries; /**< max retries if outFIFO empty */ +} IxNpeMhConfigStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = +{ + { + 0, + IX_NPEMH_NPEA_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + }, + { + 0, + IX_NPEMH_NPEB_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + }, + { + 0, + IX_NPEMH_NPEC_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + } +}; + +PRIVATE IxNpeMhConfigStats ixNpeMhConfigStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ +PRIVATE +void ixNpeMhConfigIsr (void *parameter); + +/* + * Function definition: ixNpeMhConfigIsr + */ + +PRIVATE +void ixNpeMhConfigIsr (void *parameter) +{ + IxNpeMhNpeId npeId = (IxNpeMhNpeId)parameter; + UINT32 ofint; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigIsr\n"); + + /* get the OFINT (OutFifo interrupt) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofint, IX_NPEMH_NPE_STAT_OFINT); + + /* if the OFINT status bit is set */ + if (ofint) + { + /* if there is an ISR registered for this NPE */ + if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) + { + /* invoke the ISR routine */ + ixNpeMhConfigNpeInfo[npeId].isr (npeId); + } + else + { + /* if we don't service the interrupt the NPE will continue */ + /* to trigger the interrupt indefinitely */ + IX_NPEMH_ERROR_REPORT ("No ISR registered to service " + "interrupt\n"); + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigIsr\n"); +} + +/* + * Function definition: ixNpeMhConfigInitialize + */ + +void ixNpeMhConfigInitialize ( + IxNpeMhNpeInterrupts npeInterrupts) +{ + IxNpeMhNpeId npeId; + UINT32 virtualAddr[IX_NPEMH_NUM_NPES]; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigInitialize\n"); + + /* Request a mapping for the NPE-A config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEA] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEA_BASE, + IX_OSAL_IXP400_NPEA_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEA]); + + /* Request a mapping for the NPE-B config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEB] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEB_BASE, + IX_OSAL_IXP400_NPEB_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEB]); + + /* Request a mapping for the NPE-C config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEC] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEC_BASE, + IX_OSAL_IXP400_NPEC_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEC]); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* declare a convenience pointer */ + IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; + + /* store the virtual addresses of the NPE registers for later use */ + npeInfo->virtualRegisterBase = virtualAddr[npeId]; + npeInfo->statusRegister = virtualAddr[npeId] + IX_NPEMH_NPESTAT_OFFSET; + npeInfo->controlRegister = virtualAddr[npeId] + IX_NPEMH_NPECTL_OFFSET; + npeInfo->inFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; + npeInfo->outFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; + + /* for test purposes - to verify the register addresses */ + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d status register = " + "0x%08X\n", npeId, npeInfo->statusRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d control register = " + "0x%08X\n", npeId, npeInfo->controlRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d inFifo register = " + "0x%08X\n", npeId, npeInfo->inFifoRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d outFifo register = " + "0x%08X\n", npeId, npeInfo->outFifoRegister); + + /* connect our ISR to the NPE interrupt */ + (void) ixOsalIrqBind ( + npeInfo->interruptId, ixNpeMhConfigIsr, (void *)npeId); + + /* initialise a mutex for this NPE */ + (void) ixOsalMutexInit (&npeInfo->mutex); + + /* if we should service the NPE's "outFIFO not empty" interrupt */ + if (npeInterrupts == IX_NPEMH_NPEINTERRUPTS_YES) + { + /* enable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInterruptEnable (npeId); + } + else + { + /* disable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInterruptDisable (npeId); + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigInitialize\n"); +} + +/* + * Function definition: ixNpeMhConfigUninit + */ + +void ixNpeMhConfigUninit (void) +{ + IxNpeMhNpeId npeId; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigUninit\n"); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* declare a convenience pointer */ + IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; + + /* disconnect ISR */ + ixOsalIrqUnbind(npeInfo->interruptId); + + /* destroy mutex associated with this NPE */ + ixOsalMutexDestroy(&npeInfo->mutex); + + IX_OSAL_MEM_UNMAP (npeInfo->virtualRegisterBase); + + npeInfo->virtualRegisterBase = 0; + npeInfo->statusRegister = 0; + npeInfo->controlRegister = 0; + npeInfo->inFifoRegister = 0; + npeInfo->outFifoRegister = 0; + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigUninit\n"); +} + +/* + * Function definition: ixNpeMhConfigIsrRegister + */ + +void ixNpeMhConfigIsrRegister ( + IxNpeMhNpeId npeId, + IxNpeMhConfigIsr isr) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigIsrRegister\n"); + + /* check if there is already an ISR registered for this NPE */ + if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) + { + IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, "Over-writing registered NPE ISR\n"); + } + + /* save the ISR routine with the NPE info */ + ixNpeMhConfigNpeInfo[npeId].isr = isr; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigIsrRegister\n"); +} + +/* + * Function definition: ixNpeMhConfigNpeInterruptEnable + */ + +BOOL ixNpeMhConfigNpeInterruptEnable ( + IxNpeMhNpeId npeId) +{ + UINT32 ofe; + volatile UINT32 *controlReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; + + /* get the OFE (OutFifoEnable) bit of the control register */ + IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); + + /* if the interrupt is disabled then we must enable it */ + if (!ofe) + { + /* set the OFE (OutFifoEnable) bit of the control register */ + /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ + /* time for the write to have effect */ + IX_NPEMH_REGISTER_WRITE_BITS (controlReg, + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE), + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE)); + } + + /* return the previous state of the interrupt */ + return (ofe != 0); +} + +/* + * Function definition: ixNpeMhConfigNpeInterruptDisable + */ + +BOOL ixNpeMhConfigNpeInterruptDisable ( + IxNpeMhNpeId npeId) +{ + UINT32 ofe; + volatile UINT32 *controlReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; + + /* get the OFE (OutFifoEnable) bit of the control register */ + IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); + + /* if the interrupt is enabled then we must disable it */ + if (ofe) + { + /* unset the OFE (OutFifoEnable) bit of the control register */ + /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ + /* time for the write to have effect */ + IX_NPEMH_REGISTER_WRITE_BITS (controlReg, + (0 | + IX_NPEMH_NPE_CTL_OFEWE), + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE)); + } + + /* return the previous state of the interrupt */ + return (ofe != 0); +} + +/* + * Function definition: ixNpeMhConfigMessageIdGet + */ + +IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( + IxNpeMhMessage message) +{ + /* return the most-significant byte of the first word of the */ + /* message */ + return ((IxNpeMhMessageId) ((message.data[0] >> 24) & 0xFF)); +} + +/* + * Function definition: ixNpeMhConfigNpeIdIsValid + */ + +BOOL ixNpeMhConfigNpeIdIsValid ( + IxNpeMhNpeId npeId) +{ + /* check that the npeId parameter is within the range of valid IDs */ + return (npeId >= 0 && npeId < IX_NPEMH_NUM_NPES); +} + +/* + * Function definition: ixNpeMhConfigLockGet + */ + +void ixNpeMhConfigLockGet ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigLockGet\n"); + + /* lock the mutex for this NPE */ + (void) ixOsalMutexLock (&ixNpeMhConfigNpeInfo[npeId].mutex, + IX_OSAL_WAIT_FOREVER); + + /* disable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInfo[npeId].oldInterruptState = + ixNpeMhConfigNpeInterruptDisable (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigLockGet\n"); +} + +/* + * Function definition: ixNpeMhConfigLockRelease + */ + +void ixNpeMhConfigLockRelease ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigLockRelease\n"); + + /* if the interrupt was previously enabled */ + if (ixNpeMhConfigNpeInfo[npeId].oldInterruptState) + { + /* enable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInfo[npeId].oldInterruptState = + ixNpeMhConfigNpeInterruptEnable (npeId); + } + + /* unlock the mutex for this NPE */ + (void) ixOsalMutexUnlock (&ixNpeMhConfigNpeInfo[npeId].mutex); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigLockRelease\n"); +} + +/* + * Function definition: ixNpeMhConfigInFifoWrite + */ + +IX_STATUS ixNpeMhConfigInFifoWrite ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message) +{ + volatile UINT32 *npeInFifo = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].inFifoRegister; + UINT32 retriesCount = 0; + + /* write the first word of the message to the NPE's inFIFO */ + IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[0]); + + /* need to wait for room to write second word - see SCR #493, + poll for maximum number of retries, if exceed maximum + retries, exit from while loop */ + while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) + && ixNpeMhConfigInFifoIsFull (npeId)) + { + retriesCount++; + } + + /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ + if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) + { + return IX_NPEMH_CRITICAL_NPE_ERR; + } + + /* write the second word of the message to the NPE's inFIFO */ + IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[1]); + + /* record in the stats the maximum number of retries needed */ + if (ixNpeMhConfigStats[npeId].maxInFifoFullRetries < retriesCount) + { + ixNpeMhConfigStats[npeId].maxInFifoFullRetries = retriesCount; + } + + /* update statistical info */ + ixNpeMhConfigStats[npeId].inFifoWrites++; + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhConfigOutFifoRead + */ + +IX_STATUS ixNpeMhConfigOutFifoRead ( + IxNpeMhNpeId npeId, + IxNpeMhMessage *message) +{ + volatile UINT32 *npeOutFifo = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].outFifoRegister; + UINT32 retriesCount = 0; + + /* read the first word of the message from the NPE's outFIFO */ + IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[0]); + + /* need to wait for NPE to write second word - see SCR #493 + poll for maximum number of retries, if exceed maximum + retries, exit from while loop */ + while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) + && ixNpeMhConfigOutFifoIsEmpty (npeId)) + { + retriesCount++; + } + + /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ + if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) + { + return IX_NPEMH_CRITICAL_NPE_ERR; + } + + /* read the second word of the message from the NPE's outFIFO */ + IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[1]); + + /* record in the stats the maximum number of retries needed */ + if (ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries < retriesCount) + { + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = retriesCount; + } + + /* update statistical info */ + ixNpeMhConfigStats[npeId].outFifoReads++; + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhConfigShow + */ + +void ixNpeMhConfigShow ( + IxNpeMhNpeId npeId) +{ + /* show the message fifo read counter */ + IX_NPEMH_SHOW ("Message FIFO reads", + ixNpeMhConfigStats[npeId].outFifoReads); + + /* show the message fifo write counter */ + IX_NPEMH_SHOW ("Message FIFO writes", + ixNpeMhConfigStats[npeId].inFifoWrites); + + /* show the max retries performed when inFIFO full */ + IX_NPEMH_SHOW ("Max inFIFO Full retries", + ixNpeMhConfigStats[npeId].maxInFifoFullRetries); + + /* show the max retries performed when outFIFO empty */ + IX_NPEMH_SHOW ("Max outFIFO Empty retries", + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries); + + /* show the current status of the inFifo */ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, + "InFifo is %s and %s\n", + (ixNpeMhConfigInFifoIsEmpty (npeId) ? + (int) "EMPTY" : (int) "NOT EMPTY"), + (ixNpeMhConfigInFifoIsFull (npeId) ? + (int) "FULL" : (int) "NOT FULL"), + 0, 0, 0, 0); + + /* show the current status of the outFifo */ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, + "OutFifo is %s and %s\n", + (ixNpeMhConfigOutFifoIsEmpty (npeId) ? + (int) "EMPTY" : (int) "NOT EMPTY"), + (ixNpeMhConfigOutFifoIsFull (npeId) ? + (int) "FULL" : (int) "NOT FULL"), + 0, 0, 0, 0); +} + +/* + * Function definition: ixNpeMhConfigShowReset + */ + +void ixNpeMhConfigShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the message fifo read counter */ + ixNpeMhConfigStats[npeId].outFifoReads = 0; + + /* reset the message fifo write counter */ + ixNpeMhConfigStats[npeId].inFifoWrites = 0; + + /* reset the max inFIFO Full retries counter */ + ixNpeMhConfigStats[npeId].maxInFifoFullRetries = 0; + + /* reset the max outFIFO empty retries counter */ + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = 0; +} + + |