diff options
Diffstat (limited to 'drivers/net/npe/IxNpeDlNpeMgrUtils.c')
| -rw-r--r-- | drivers/net/npe/IxNpeDlNpeMgrUtils.c | 782 |
1 files changed, 0 insertions, 782 deletions
diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c deleted file mode 100644 index db50d22..0000000 --- a/drivers/net/npe/IxNpeDlNpeMgrUtils.c +++ /dev/null @@ -1,782 +0,0 @@ -/** - * @file IxNpeDlNpeMgrUtils.c - * - * @author Intel Corporation - * @date 18 February 2002 - * - * @brief This file contains the implementation of the private API for the - * IXP425 NPE Downloader NpeMgr Utils module - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -/* - * Put the system defined include files required. - */ -#define IX_NPE_DL_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of - * retries before - * timeout - */ - -/* - * Put the user defined include files required. - */ -#include "IxOsal.h" -#include "IxNpeDl.h" -#include "IxNpeDlNpeMgrUtils_p.h" -#include "IxNpeDlNpeMgrEcRegisters_p.h" -#include "IxNpeDlMacros_p.h" - -/* - * #defines and macros used in this file. - */ - -/* used to bit-mask a number of bytes */ -#define IX_NPEDL_MASK_LOWER_BYTE_OF_WORD 0x000000FF -#define IX_NPEDL_MASK_LOWER_SHORT_OF_WORD 0x0000FFFF -#define IX_NPEDL_MASK_FULL_WORD 0xFFFFFFFF - -#define IX_NPEDL_BYTES_PER_WORD 4 -#define IX_NPEDL_BYTES_PER_SHORT 2 - -#define IX_NPEDL_REG_SIZE_BYTE 8 -#define IX_NPEDL_REG_SIZE_SHORT 16 -#define IX_NPEDL_REG_SIZE_WORD 32 - -/* - * Introduce extra read cycles after issuing read command to NPE - * so that we read the register after the NPE has updated it - * This is to overcome race condition between XScale and NPE - */ -#define IX_NPEDL_DELAY_READ_CYCLES 2 -/* - * To mask top three MSBs of 32bit word to download into NPE IMEM - */ -#define IX_NPEDL_MASK_UNUSED_IMEM_BITS 0x1FFFFFFF; - - -/* - * typedefs - */ -typedef struct -{ - UINT32 regAddress; - UINT32 regSize; -} IxNpeDlCtxtRegAccessInfo; - -/* module statistics counters */ -typedef struct -{ - UINT32 insMemWrites; - UINT32 insMemWriteFails; - UINT32 dataMemWrites; - UINT32 dataMemWriteFails; - UINT32 ecsRegWrites; - UINT32 ecsRegReads; - UINT32 dbgInstructionExecs; - UINT32 contextRegWrites; - UINT32 physicalRegWrites; - UINT32 nextPcWrites; -} IxNpeDlNpeMgrUtilsStats; - - -/* - * Variable declarations global to this file only. Externs are followed by - * static variables. - */ - -/* - * contains useful address and function pointers to read/write Context Regs, - * eliminating some switch or if-else statements in places - */ -static IxNpeDlCtxtRegAccessInfo ixNpeDlCtxtRegAccInfo[IX_NPEDL_CTXT_REG_MAX] = -{ - { - IX_NPEDL_CTXT_REG_ADDR_STEVT, - IX_NPEDL_REG_SIZE_BYTE - }, - { - IX_NPEDL_CTXT_REG_ADDR_STARTPC, - IX_NPEDL_REG_SIZE_SHORT - }, - { - IX_NPEDL_CTXT_REG_ADDR_REGMAP, - IX_NPEDL_REG_SIZE_SHORT - }, - { - IX_NPEDL_CTXT_REG_ADDR_CINDEX, - IX_NPEDL_REG_SIZE_BYTE - } -}; - -static UINT32 ixNpeDlSavedExecCount = 0; -static UINT32 ixNpeDlSavedEcsDbgCtxtReg2 = 0; - -static IxNpeDlNpeMgrUtilsStats ixNpeDlNpeMgrUtilsStats; - - -/* - * static function prototypes. - */ -PRIVATE __inline__ void -ixNpeDlNpeMgrWriteCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, - UINT32 addr, UINT32 data); - -PRIVATE __inline__ UINT32 -ixNpeDlNpeMgrReadCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, UINT32 addr); - -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegRead (UINT32 npeBaseAddress, UINT32 regAddr, - UINT32 regSize, UINT32 ctxtNum, UINT32 *regVal); - -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, - UINT32 regVal, UINT32 regSize, - UINT32 ctxtNum, BOOL verify); - -/* - * Function definition: ixNpeDlNpeMgrWriteCommandIssue - */ -PRIVATE __inline__ void -ixNpeDlNpeMgrWriteCommandIssue ( - UINT32 npeBaseAddress, - UINT32 cmd, - UINT32 addr, - UINT32 data) -{ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, data); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); -} - - -/* - * Function definition: ixNpeDlNpeMgrReadCommandIssue - */ -PRIVATE __inline__ UINT32 -ixNpeDlNpeMgrReadCommandIssue ( - UINT32 npeBaseAddress, - UINT32 cmd, - UINT32 addr) -{ - UINT32 data = 0; - int i; - - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); - for (i = 0; i <= IX_NPEDL_DELAY_READ_CYCLES; i++) - { - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, &data); - } - - return data; -} - -/* - * Function definition: ixNpeDlNpeMgrInsMemWrite - */ -IX_STATUS -ixNpeDlNpeMgrInsMemWrite ( - UINT32 npeBaseAddress, - UINT32 insMemAddress, - UINT32 insMemData, - BOOL verify) -{ - UINT32 insMemDataRtn; - - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_INS_MEM, - insMemAddress, insMemData); - if (verify) - { - /* write invalid data to this reg, so we can see if we're reading - the EXDATA register too early */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, - ~insMemData); - - /*Disabled since top 3 MSB are not used for Azusa hardware Refer WR:IXA00053900*/ - insMemData&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; - - insMemDataRtn=ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_INS_MEM, - insMemAddress); - - insMemDataRtn&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; - - if (insMemData != insMemDataRtn) - { - ixNpeDlNpeMgrUtilsStats.insMemWriteFails++; - return IX_FAIL; - } - } - - ixNpeDlNpeMgrUtilsStats.insMemWrites++; - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrDataMemWrite - */ -IX_STATUS -ixNpeDlNpeMgrDataMemWrite ( - UINT32 npeBaseAddress, - UINT32 dataMemAddress, - UINT32 dataMemData, - BOOL verify) -{ - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_DATA_MEM, - dataMemAddress, dataMemData); - if (verify) - { - /* write invalid data to this reg, so we can see if we're reading - the EXDATA register too early */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, ~dataMemData); - - if (dataMemData != - ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_DATA_MEM, - dataMemAddress)) - { - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails++; - return IX_FAIL; - } - } - - ixNpeDlNpeMgrUtilsStats.dataMemWrites++; - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrExecAccRegWrite - */ -void -ixNpeDlNpeMgrExecAccRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddress, - UINT32 regData) -{ - ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_WR_ECS_REG, - regAddress, regData); - ixNpeDlNpeMgrUtilsStats.ecsRegWrites++; -} - - -/* - * Function definition: ixNpeDlNpeMgrExecAccRegRead - */ -UINT32 -ixNpeDlNpeMgrExecAccRegRead ( - UINT32 npeBaseAddress, - UINT32 regAddress) -{ - ixNpeDlNpeMgrUtilsStats.ecsRegReads++; - return ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, - IX_NPEDL_EXCTL_CMD_RD_ECS_REG, - regAddress); -} - - -/* - * Function definition: ixNpeDlNpeMgrCommandIssue - */ -void -ixNpeDlNpeMgrCommandIssue ( - UINT32 npeBaseAddress, - UINT32 command) -{ - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrCommandIssue\n"); - - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, command); - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrCommandIssue\n"); -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionPreExec - */ -void -ixNpeDlNpeMgrDebugInstructionPreExec( - UINT32 npeBaseAddress) -{ - /* turn off the halt bit by clearing Execution Count register. */ - /* save reg contents 1st and restore later */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, - &ixNpeDlSavedExecCount); - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, 0); - - /* ensure that IF and IE are on (temporarily), so that we don't end up - * stepping forever */ - ixNpeDlSavedEcsDbgCtxtReg2 = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_DBG_CTXT_REG_2); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, - (ixNpeDlSavedEcsDbgCtxtReg2 | - IX_NPEDL_MASK_ECS_DBG_REG_2_IF | - IX_NPEDL_MASK_ECS_DBG_REG_2_IE)); -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionExec - */ -IX_STATUS -ixNpeDlNpeMgrDebugInstructionExec( - UINT32 npeBaseAddress, - UINT32 npeInstruction, - UINT32 ctxtNum, - UINT32 ldur) -{ - UINT32 ecsDbgRegVal; - UINT32 oldWatchcount, newWatchcount; - UINT32 retriesCount = 0; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrDebugInstructionExec\n"); - - /* set the Active bit, and the LDUR, in the debug level */ - ecsDbgRegVal = IX_NPEDL_MASK_ECS_REG_0_ACTIVE | - (ldur << IX_NPEDL_OFFSET_ECS_REG_0_LDUR); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, - ecsDbgRegVal); - - /* - * set CCTXT at ECS DEBUG L3 to specify in which context to execute the - * instruction, and set SELCTXT at ECS DEBUG Level to specify which context - * store to access. - * Debug ECS Level Reg 1 has form 0x000n000n, where n = context number - */ - ecsDbgRegVal = (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_CCTXT) | - (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT); - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_1, - ecsDbgRegVal); - - /* clear the pipeline */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); - - /* load NPE instruction into the instruction register */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_INSTRUCT_REG, - npeInstruction); - - /* we need this value later to wait for completion of NPE execution step */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, &oldWatchcount); - - /* issue a Step One command via the Execution Control register */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STEP); - - /* Watch Count register increments when NPE completes an instruction */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, - &newWatchcount); - - /* - * force the XScale to wait until the NPE has finished execution step - * NOTE that this delay will be very small, just long enough to allow a - * single NPE instruction to complete execution; if instruction execution - * is not completed before timeout retries, exit the while loop - */ - while ((IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) - && (newWatchcount == oldWatchcount)) - { - /* Watch Count register increments when NPE completes an instruction */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, - &newWatchcount); - - retriesCount++; - } - - if (IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) - { - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs++; - } - else - { - /* Return timeout status as the instruction has not been executed - * after maximum retries */ - status = IX_NPEDL_CRITICAL_NPE_ERR; - } - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrDebugInstructionExec\n"); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrDebugInstructionPostExec - */ -void -ixNpeDlNpeMgrDebugInstructionPostExec( - UINT32 npeBaseAddress) -{ - /* clear active bit in debug level */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, - 0); - - /* clear the pipeline */ - ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); - - /* restore Execution Count register contents. */ - IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, - ixNpeDlSavedExecCount); - - /* restore IF and IE bits to original values */ - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, - ixNpeDlSavedEcsDbgCtxtReg2); -} - - -/* - * Function definition: ixNpeDlNpeMgrLogicalRegRead - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegRead ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regSize, - UINT32 ctxtNum, - UINT32 *regVal) -{ - IX_STATUS status = IX_SUCCESS; - UINT32 npeInstruction = 0; - UINT32 mask = 0; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrLogicalRegRead\n"); - - switch (regSize) - { - case IX_NPEDL_REG_SIZE_BYTE: - npeInstruction = IX_NPEDL_INSTR_RD_REG_BYTE; - mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; - case IX_NPEDL_REG_SIZE_SHORT: - npeInstruction = IX_NPEDL_INSTR_RD_REG_SHORT; - mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; - case IX_NPEDL_REG_SIZE_WORD: - npeInstruction = IX_NPEDL_INSTR_RD_REG_WORD; - mask = IX_NPEDL_MASK_FULL_WORD; break; - } - - /* make regAddr be the SRC and DEST operands (e.g. movX d0, d0) */ - npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_SRC) | - (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); - - /* step execution of NPE intruction using Debug Executing Context stack */ - status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, npeInstruction, - ctxtNum, IX_NPEDL_RD_INSTR_LDUR); - - if (IX_SUCCESS != status) - { - return status; - } - - /* read value of register from Execution Data register */ - IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, regVal); - - /* align value from left to right */ - *regVal = (*regVal >> (IX_NPEDL_REG_SIZE_WORD - regSize)) & mask; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrLogicalRegRead\n"); - - return IX_SUCCESS; -} - - -/* - * Function definition: ixNpeDlNpeMgrLogicalRegWrite - */ -PRIVATE IX_STATUS -ixNpeDlNpeMgrLogicalRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regVal, - UINT32 regSize, - UINT32 ctxtNum, - BOOL verify) -{ - UINT32 npeInstruction = 0; - UINT32 mask = 0; - IX_STATUS status = IX_SUCCESS; - UINT32 retRegVal; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrLogicalRegWrite\n"); - - if (regSize == IX_NPEDL_REG_SIZE_WORD) - { - /* NPE register addressing is left-to-right: e.g. |d0|d1|d2|d3| */ - /* Write upper half-word (short) to |d0|d1| */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, - regVal >> IX_NPEDL_REG_SIZE_SHORT, - IX_NPEDL_REG_SIZE_SHORT, - ctxtNum, verify); - - if (IX_SUCCESS != status) - { - return status; - } - - /* Write lower half-word (short) to |d2|d3| */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, - regAddr + IX_NPEDL_BYTES_PER_SHORT, - regVal & IX_NPEDL_MASK_LOWER_SHORT_OF_WORD, - IX_NPEDL_REG_SIZE_SHORT, - ctxtNum, verify); - - if (IX_SUCCESS != status) - { - return status; - } - } - else - { - switch (regSize) - { - case IX_NPEDL_REG_SIZE_BYTE: - npeInstruction = IX_NPEDL_INSTR_WR_REG_BYTE; - mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; - case IX_NPEDL_REG_SIZE_SHORT: - npeInstruction = IX_NPEDL_INSTR_WR_REG_SHORT; - mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; - } - /* mask out any redundant bits, so verify will work later */ - regVal &= mask; - - /* fill dest operand field of instruction with destination reg addr */ - npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); - - /* fill src operand field of instruction with least-sig 5 bits of val*/ - npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA) << - IX_NPEDL_OFFSET_INSTR_SRC); - - /* fill coprocessor field of instruction with most-sig 11 bits of val*/ - npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA) << - IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA); - - /* step execution of NPE intruction using Debug ECS */ - status = ixNpeDlNpeMgrDebugInstructionExec(npeBaseAddress, npeInstruction, - ctxtNum, IX_NPEDL_WR_INSTR_LDUR); - - if (IX_SUCCESS != status) - { - return status; - } - }/* condition: if reg to be written is 8-bit or 16-bit (not 32-bit) */ - - if (verify) - { - status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr, - regSize, ctxtNum, &retRegVal); - - if (IX_SUCCESS == status) - { - if (regVal != retRegVal) - { - status = IX_FAIL; - } - } - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrLogicalRegWrite : status = %d\n", - status); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrPhysicalRegWrite - */ -IX_STATUS -ixNpeDlNpeMgrPhysicalRegWrite ( - UINT32 npeBaseAddress, - UINT32 regAddr, - UINT32 regValue, - BOOL verify) -{ - IX_STATUS status; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrPhysicalRegWrite\n"); - -/* - * There are 32 physical registers used in an NPE. These are - * treated as 16 pairs of 32-bit registers. To write one of the pair, - * write the pair number (0-16) to the REGMAP for Context 0. Then write - * the value to register 0 or 4 in the regfile, depending on which - * register of the pair is to be written - */ - - /* - * set REGMAP for context 0 to (regAddr >> 1) to choose which pair (0-16) - * of physical registers to write - */ - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, - IX_NPEDL_CTXT_REG_ADDR_REGMAP, - (regAddr >> - IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP), - IX_NPEDL_REG_SIZE_SHORT, 0, verify); - if (status == IX_SUCCESS) - { - /* regAddr = 0 or 4 */ - regAddr = (regAddr & IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR) * - IX_NPEDL_BYTES_PER_WORD; - - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, regValue, - IX_NPEDL_REG_SIZE_WORD, 0, verify); - } - - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrPhysicalRegWrite: " - "error writing to physical register\n"); - } - - ixNpeDlNpeMgrUtilsStats.physicalRegWrites++; - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrPhysicalRegWrite : status = %d\n", - status); - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrCtxtRegWrite - */ -IX_STATUS -ixNpeDlNpeMgrCtxtRegWrite ( - UINT32 npeBaseAddress, - UINT32 ctxtNum, - IxNpeDlCtxtRegNum ctxtReg, - UINT32 ctxtRegVal, - BOOL verify) -{ - UINT32 tempRegVal; - UINT32 ctxtRegAddr; - UINT32 ctxtRegSize; - IX_STATUS status = IX_SUCCESS; - - IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, - "Entering ixNpeDlNpeMgrCtxtRegWrite\n"); - - /* - * Context 0 has no STARTPC. Instead, this value is used to set - * NextPC for Background ECS, to set where NPE starts executing code - */ - if ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STARTPC)) - { - /* read BG_CTXT_REG_0, update NEXTPC bits, and write back to reg */ - tempRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, - IX_NPEDL_ECS_BG_CTXT_REG_0); - tempRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_NEXTPC; - tempRegVal |= (ctxtRegVal << IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC) & - IX_NPEDL_MASK_ECS_REG_0_NEXTPC; - - ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, - IX_NPEDL_ECS_BG_CTXT_REG_0, tempRegVal); - - ixNpeDlNpeMgrUtilsStats.nextPcWrites++; - } - else - { - ctxtRegAddr = ixNpeDlCtxtRegAccInfo[ctxtReg].regAddress; - ctxtRegSize = ixNpeDlCtxtRegAccInfo[ctxtReg].regSize; - status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, ctxtRegAddr, - ctxtRegVal, ctxtRegSize, - ctxtNum, verify); - if (status != IX_SUCCESS) - { - IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrCtxtRegWrite: " - "error writing to context store register\n"); - } - - ixNpeDlNpeMgrUtilsStats.contextRegWrites++; - } - - IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, - "Exiting ixNpeDlNpeMgrCtxtRegWrite : status = %d\n", - status); - - return status; -} - - -/* - * Function definition: ixNpeDlNpeMgrUtilsStatsShow - */ -void -ixNpeDlNpeMgrUtilsStatsShow (void) -{ - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\nixNpeDlNpeMgrUtilsStatsShow:\n" - "\tInstruction Memory writes: %u\n" - "\tInstruction Memory writes failed: %u\n" - "\tData Memory writes: %u\n" - "\tData Memory writes failed: %u\n", - ixNpeDlNpeMgrUtilsStats.insMemWrites, - ixNpeDlNpeMgrUtilsStats.insMemWriteFails, - ixNpeDlNpeMgrUtilsStats.dataMemWrites, - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails, - 0,0); - - ixOsalLog (IX_OSAL_LOG_LVL_USER, - IX_OSAL_LOG_DEV_STDOUT, - "\tExecuting Context Stack Register writes: %u\n" - "\tExecuting Context Stack Register reads: %u\n" - "\tPhysical Register writes: %u\n" - "\tContext Store Register writes: %u\n" - "\tExecution Backgound Context NextPC writes: %u\n" - "\tDebug Instructions Executed: %u\n\n", - ixNpeDlNpeMgrUtilsStats.ecsRegWrites, - ixNpeDlNpeMgrUtilsStats.ecsRegReads, - ixNpeDlNpeMgrUtilsStats.physicalRegWrites, - ixNpeDlNpeMgrUtilsStats.contextRegWrites, - ixNpeDlNpeMgrUtilsStats.nextPcWrites, - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs); -} - - -/* - * Function definition: ixNpeDlNpeMgrUtilsStatsReset - */ -void -ixNpeDlNpeMgrUtilsStatsReset (void) -{ - ixNpeDlNpeMgrUtilsStats.insMemWrites = 0; - ixNpeDlNpeMgrUtilsStats.insMemWriteFails = 0; - ixNpeDlNpeMgrUtilsStats.dataMemWrites = 0; - ixNpeDlNpeMgrUtilsStats.dataMemWriteFails = 0; - ixNpeDlNpeMgrUtilsStats.ecsRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.ecsRegReads = 0; - ixNpeDlNpeMgrUtilsStats.physicalRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.contextRegWrites = 0; - ixNpeDlNpeMgrUtilsStats.nextPcWrites = 0; - ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs = 0; -} |