summaryrefslogtreecommitdiff
path: root/drivers/net/npe/IxEthMii.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/npe/IxEthMii.c')
-rw-r--r--drivers/net/npe/IxEthMii.c473
1 files changed, 0 insertions, 473 deletions
diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c
deleted file mode 100644
index 27f3548..0000000
--- a/drivers/net/npe/IxEthMii.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/**
- * @file IxEthMii.c
- *
- * @author Intel Corporation
- * @date
- *
- * @brief MII control functions
- *
- * Design Notes:
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier: BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-
-#include "IxEthAcc.h"
-#include "IxEthMii_p.h"
-
-#ifdef __wince
-#include "IxOsPrintf.h"
-#endif
-
-/* Array to store the phy IDs of the discovered phys */
-PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR];
-
-/*********************************************************
- *
- * Scan for PHYs on the MII bus. This function returns
- * an array of booleans, one for each PHY address.
- * If a PHY is found at a particular address, the
- * corresponding entry in the array is set to true.
- *
- */
-
-PUBLIC IX_STATUS
-ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
-{
- UINT32 i;
- UINT16 regval, regvalId1, regvalId2;
-
- /*Search for PHYs on the MII*/
- /*Search for existant phys on the MDIO bus*/
-
- if ((phyPresent == NULL) ||
- (maxPhyCount > IXP425_ETH_ACC_MII_MAX_ADDR))
- {
- return IX_FAIL;
- }
-
- /* fill the array */
- for(i=0;
- i<IXP425_ETH_ACC_MII_MAX_ADDR;
- i++)
- {
- phyPresent[i] = false;
- }
-
- /* iterate through the PHY addresses */
- for(i=0;
- maxPhyCount > 0 && i<IXP425_ETH_ACC_MII_MAX_ADDR;
- i++)
- {
- ixEthMiiPhyId[i] = IX_ETH_MII_INVALID_PHY_ID;
- if(ixEthAccMiiReadRtn(i,
- IX_ETH_MII_CTRL_REG,
- &regval) == IX_ETH_ACC_SUCCESS)
- {
- if((regval & 0xffff) != 0xffff)
- {
- maxPhyCount--;
- /*Need to read the register twice here to flush PHY*/
- ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, &regvalId1);
- ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, &regvalId1);
- ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID2_REG, &regvalId2);
- ixEthMiiPhyId[i] = (regvalId1 << IX_ETH_MII_REG_SHL) | regvalId2;
- if ((ixEthMiiPhyId[i] == IX_ETH_MII_KS8995_PHY_ID)
- || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT971_PHY_ID)
- || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT972_PHY_ID)
- || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973_PHY_ID)
- || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973A3_PHY_ID)
- || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT9785_PHY_ID)
- )
- {
- /* supported phy */
- phyPresent[i] = true;
- } /* end of if(ixEthMiiPhyId) */
- else
- {
- if (ixEthMiiPhyId[i] != IX_ETH_MII_INVALID_PHY_ID)
- {
- /* unsupported phy */
- ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
- IX_OSAL_LOG_DEV_STDOUT,
- "ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n",
- ixEthMiiPhyId[i], 2, 3, 4, 5, 6);
- ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID;
- phyPresent[i] = true;
- }
- }
- }
- }
- }
- return IX_SUCCESS;
-}
-
-/************************************************************
- *
- * Configure the PHY at the specified address
- *
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyConfig(UINT32 phyAddr,
- BOOL speed100,
- BOOL fullDuplex,
- BOOL autonegotiate)
-{
- UINT16 regval=0;
-
- /* parameter check */
- if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
- (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
- {
- /*
- * set the control register
- */
- if(autonegotiate)
- {
- regval |= IX_ETH_MII_CR_AUTO_EN | IX_ETH_MII_CR_RESTART;
- }
- else
- {
- if(speed100)
- {
- regval |= IX_ETH_MII_CR_100;
- }
- if(fullDuplex)
- {
- regval |= IX_ETH_MII_CR_FDX;
- }
- } /* end of if-else() */
- if (ixEthAccMiiWriteRtn(phyAddr,
- IX_ETH_MII_CTRL_REG,
- regval) == IX_ETH_ACC_SUCCESS)
- {
- return IX_SUCCESS;
- }
- } /* end of if(phyAddr) */
- return IX_FAIL;
-}
-
-/******************************************************************
- *
- * Enable the PHY Loopback at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackEnable (UINT32 phyAddr)
-{
- UINT16 regval ;
-
- if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
- (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
- {
- /* read/write the control register */
- if(ixEthAccMiiReadRtn (phyAddr,
- IX_ETH_MII_CTRL_REG,
- &regval)
- == IX_ETH_ACC_SUCCESS)
- {
- if(ixEthAccMiiWriteRtn (phyAddr,
- IX_ETH_MII_CTRL_REG,
- regval | IX_ETH_MII_CR_LOOPBACK)
- == IX_ETH_ACC_SUCCESS)
- {
- return IX_SUCCESS;
- }
- }
- }
- return IX_FAIL;
-}
-
-/******************************************************************
- *
- * Disable the PHY Loopback at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackDisable (UINT32 phyAddr)
-{
- UINT16 regval ;
-
- if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
- (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
- {
- /* read/write the control register */
- if(ixEthAccMiiReadRtn (phyAddr,
- IX_ETH_MII_CTRL_REG,
- &regval)
- == IX_ETH_ACC_SUCCESS)
- {
- if(ixEthAccMiiWriteRtn (phyAddr,
- IX_ETH_MII_CTRL_REG,
- regval & (~IX_ETH_MII_CR_LOOPBACK))
- == IX_ETH_ACC_SUCCESS)
- {
- return IX_SUCCESS;
- }
- }
- }
- return IX_FAIL;
-}
-
-/******************************************************************
- *
- * Reset the PHY at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyReset(UINT32 phyAddr)
-{
- UINT32 timeout;
- UINT16 regval;
-
- if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
- (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
- {
- if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973A3_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
- )
- {
- /* use the control register to reset the phy */
- ixEthAccMiiWriteRtn(phyAddr,
- IX_ETH_MII_CTRL_REG,
- IX_ETH_MII_CR_RESET);
-
- /* poll until the reset bit is cleared */
- timeout = 0;
- do
- {
- ixOsalSleep (IX_ETH_MII_RESET_POLL_MS);
-
- /* read the control register and check for timeout */
- ixEthAccMiiReadRtn(phyAddr,
- IX_ETH_MII_CTRL_REG,
- &regval);
- if ((regval & IX_ETH_MII_CR_RESET) == 0)
- {
- /* timeout bit is self-cleared */
- break;
- }
- timeout += IX_ETH_MII_RESET_POLL_MS;
- }
- while (timeout < IX_ETH_MII_RESET_DELAY_MS);
-
- /* check for timeout */
- if (timeout >= IX_ETH_MII_RESET_DELAY_MS)
- {
- ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
- IX_ETH_MII_CR_NORM_EN);
- return IX_FAIL;
- }
-
- return IX_SUCCESS;
- } /* end of if(ixEthMiiPhyId) */
- else if (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_KS8995_PHY_ID)
- {
- /* reset bit is reserved, just reset the control register */
- ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
- IX_ETH_MII_CR_NORM_EN);
- return IX_SUCCESS;
- }
- else
- {
- /* unknown PHY, set the control register reset bit,
- * wait 2 s. and clear the control register.
- */
- ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
- IX_ETH_MII_CR_RESET);
-
- ixOsalSleep (IX_ETH_MII_RESET_DELAY_MS);
-
- ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
- IX_ETH_MII_CR_NORM_EN);
- return IX_SUCCESS;
- } /* end of if-else(ixEthMiiPhyId) */
- } /* end of if(phyAddr) */
- return IX_FAIL;
-}
-
-/*****************************************************************
- *
- * Link state query functions
- */
-
-PUBLIC IX_STATUS
-ixEthMiiLinkStatus(UINT32 phyAddr,
- BOOL *linkUp,
- BOOL *speed100,
- BOOL *fullDuplex,
- BOOL *autoneg)
-{
- UINT16 ctrlRegval, statRegval, regval, regval4, regval5;
-
- /* check the parameters */
- if ((linkUp == NULL) ||
- (speed100 == NULL) ||
- (fullDuplex == NULL) ||
- (autoneg == NULL))
- {
- return IX_FAIL;
- }
-
- *linkUp = false;
- *speed100 = false;
- *fullDuplex = false;
- *autoneg = false;
-
- if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
- (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
- {
- if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) ||
- (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
- )
- {
- /* --------------------------------------------------*/
- /* Retrieve information from PHY specific register */
- /* --------------------------------------------------*/
- if (ixEthAccMiiReadRtn(phyAddr,
- IX_ETH_MII_STAT2_REG,
- &regval) != IX_ETH_ACC_SUCCESS)
- {
- return IX_FAIL;
- }
- *linkUp = ((regval & IX_ETH_MII_SR2_LINK) != 0);
- *speed100 = ((regval & IX_ETH_MII_SR2_100) != 0);
- *fullDuplex = ((regval & IX_ETH_MII_SR2_FD) != 0);
- *autoneg = ((regval & IX_ETH_MII_SR2_AUTO) != 0);
- return IX_SUCCESS;
- } /* end of if(ixEthMiiPhyId) */
- else
- {
- /* ----------------------------------------------------*/
- /* Retrieve information from status and ctrl registers */
- /* ----------------------------------------------------*/
- if (ixEthAccMiiReadRtn(phyAddr,
- IX_ETH_MII_CTRL_REG,
- &ctrlRegval) != IX_ETH_ACC_SUCCESS)
- {
- return IX_FAIL;
- }
- ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &statRegval);
-
- *linkUp = ((statRegval & IX_ETH_MII_SR_LINK_STATUS) != 0);
- if (*linkUp)
- {
- *autoneg = ((ctrlRegval & IX_ETH_MII_CR_AUTO_EN) != 0) &&
- ((statRegval & IX_ETH_MII_SR_AUTO_SEL) != 0) &&
- ((statRegval & IX_ETH_MII_SR_AUTO_NEG) != 0);
-
- if (*autoneg)
- {
- /* mask the current stat values with the capabilities */
- ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_ADS_REG, &regval4);
- ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_PRTN_REG, &regval5);
- /* merge the flags from the 3 registers */
- regval = (statRegval & ((regval4 & regval5) << 6));
- /* initialise from status register values */
- if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0)
- {
- /* 100 Base X full dplx */
- *speed100 = true;
- *fullDuplex = true;
- return IX_SUCCESS;
- }
- if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0)
- {
- /* 100 Base X half dplx */
- *speed100 = true;
- return IX_SUCCESS;
- }
- if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0)
- {
- /* 10 mb full dplx */
- *fullDuplex = true;
- return IX_SUCCESS;
- }
- if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0)
- {
- /* 10 mb half dplx */
- return IX_SUCCESS;
- }
- } /* end of if(autoneg) */
- else
- {
- /* autonegotiate not complete, return setup parameters */
- *speed100 = ((ctrlRegval & IX_ETH_MII_CR_100) != 0);
- *fullDuplex = ((ctrlRegval & IX_ETH_MII_CR_FDX) != 0);
- }
- } /* end of if(linkUp) */
- } /* end of if-else(ixEthMiiPhyId) */
- } /* end of if(phyAddr) */
- else
- {
- return IX_FAIL;
- } /* end of if-else(phyAddr) */
- return IX_SUCCESS;
-}
-
-/*****************************************************************
- *
- * Link state display functions
- */
-
-PUBLIC IX_STATUS
-ixEthMiiPhyShow (UINT32 phyAddr)
-{
- BOOL linkUp, speed100, fullDuplex, autoneg;
- UINT16 cregval;
- UINT16 sregval;
-
-
- ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &sregval);
- ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_CTRL_REG, &cregval);
-
- /* get link information */
- if (ixEthMiiLinkStatus(phyAddr,
- &linkUp,
- &speed100,
- &fullDuplex,
- &autoneg) != IX_ETH_ACC_SUCCESS)
- {
- printf("PHY Status unknown\n");
- return IX_FAIL;
- }
-
- printf("PHY ID [phyAddr]: %8.8x\n",ixEthMiiPhyId[phyAddr]);
- printf( " Status reg: %4.4x\n",sregval);
- printf( " control reg: %4.4x\n",cregval);
- /* display link information */
- printf("PHY Status:\n");
- printf(" Link is %s\n",
- (linkUp ? "Up" : "Down"));
- if((sregval & IX_ETH_MII_SR_REMOTE_FAULT) != 0)
- {
- printf(" Remote fault detected\n");
- }
- printf(" Auto Negotiation %s\n",
- (autoneg ? "Completed" : "Not Completed"));
-
- printf("PHY Configuration:\n");
- printf(" Speed %sMb/s\n",
- (speed100 ? "100" : "10"));
- printf(" %s Duplex\n",
- (fullDuplex ? "Full" : "Half"));
- printf(" Auto Negotiation %s\n",
- (autoneg ? "Enabled" : "Disabled"));
- return IX_SUCCESS;
-}
-