diff options
Diffstat (limited to 'drivers/net/npe/IxEthDBVlan.c')
| -rw-r--r-- | drivers/net/npe/IxEthDBVlan.c | 1155 |
1 files changed, 0 insertions, 1155 deletions
diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c deleted file mode 100644 index 483e348..0000000 --- a/drivers/net/npe/IxEthDBVlan.c +++ /dev/null @@ -1,1155 +0,0 @@ -/** - * @file IxEthDBVlan.c - * - * @brief Implementation of the VLAN API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB.h" -#include "IxEthDB_p.h" - -/* forward prototypes */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex); -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet); - -/* contants used by various functions as "action" parameter */ -#define ADD_VLAN (0x1) -#define REMOVE_VLAN (0x2) - -/** - * @brief adds or removes a VLAN from a VLAN set - * - * @param vlanID VLAN ID to add or remove - * @param table VLAN set to add into or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBLocalVlanMembershipChange(UINT32 vlanID, IxEthDBVlanSet table, UINT32 action) -{ - UINT32 setOffset; - - /* add/remove VID to membership table */ - setOffset = VLAN_SET_OFFSET(vlanID); /* we need 9 bits to index the 512 byte membership array */ - - if (action == ADD_VLAN) - { - table[setOffset] |= 1 << VLAN_SET_MASK(vlanID); - } - else if (action == REMOVE_VLAN) - { - table[setOffset] &= ~(1 << VLAN_SET_MASK(vlanID)); - } -} - -/** - * @brief updates a set of 8 VLANs in an NPE - * - * @param portID ID of the port - * @param setOffset offset of the 8 VLANs - * - * This function updates the VLAN membership table - * and Transmit Tagging Info table for 8 consecutive - * VLAN IDs indexed by setOffset. - * - * For example, a setOffset of 0 indexes VLAN IDs 0 - * through 7, 1 indexes VLAN IDs 8 through 9 etc. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBVlanTableEntryUpdate(IxEthDBPortId portID, UINT32 setOffset) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - IxNpeMhMessage message; - IX_STATUS result; - - FILL_SETPORTVLANTABLEENTRY_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - 2 * setOffset, - portInfo->vlanMembership[setOffset], - portInfo->transmitTaggingInfo[setOffset]); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief updates a VLAN range in an NPE - * - * @param portID ID of the port - * - * This function is similar to @ref ixEthDBVlanTableEntryUpdate - * except that it can update more than one VLAN set (up to - * the entire VLAN membership and TTI tables if the offset is 0 - * and length is sizeof (IxEthDBVlanSet) (512 bytes). - * - * Updating the NPE via this method is slower as it requires - * a memory copy from SDRAM, hence it is recommended that the - * ixEthDBVlanTableEntryUpdate function is used where possible. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBVlanTableRangeUpdate(IxEthDBPortId portID) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - UINT8 *vlanUpdateZone = (UINT8 *) portInfo->updateMethod.vlanUpdateZone; - IxNpeMhMessage message; - UINT32 setIndex; - IX_STATUS result; - - /* copy membership info and transmit tagging into into exchange area */ - for (setIndex = 0 ; setIndex < sizeof (portInfo->vlanMembership) ; setIndex++) - { - /* membership and TTI data are interleaved */ - vlanUpdateZone[setIndex * 2] = portInfo->vlanMembership[setIndex]; - vlanUpdateZone[setIndex * 2 + 1] = portInfo->transmitTaggingInfo[setIndex]; - } - - IX_OSAL_CACHE_FLUSH(vlanUpdateZone, FULL_VLAN_BYTE_SIZE); - - /* build NPE message */ - FILL_SETPORTVLANTABLERANGE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 0, 0, - IX_OSAL_MMU_VIRT_TO_PHYS(vlanUpdateZone)); - - /* send message */ - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief adds or removes a VLAN from a port's VLAN membership table - * or Transmit Tagging Information table - * - * @param portID ID of the port - * @param vlanID VLAN ID to add or remove - * @param table to add or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBPortVlanMembershipChange(IxEthDBPortId portID, IxEthDBVlanId vlanID, IxEthDBVlanSet table, UINT32 action) -{ - /* change VLAN in local membership table */ - ixEthDBLocalVlanMembershipChange(vlanID, table, action); - - /* send updated entry to NPE */ - return ixEthDBVlanTableEntryUpdate(portID, VLAN_SET_OFFSET(vlanID)); -} - -/** - * @brief sets the default port VLAN tag (the lower 3 bytes are the PVID) - * - * @param portID ID of the port - * @param vlanTag port VLAN tag (802.1Q tag) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* add VLAN ID to local membership table */ - ixEthDBPortVlanMembershipChange(portID, - vlanTag & IX_ETH_DB_802_1Q_VLAN_MASK, - ixEthDBPortInfo[portID].vlanMembership, - ADD_VLAN); - - /* set tag in portInfo */ - ixEthDBPortInfo[portID].vlanTag = vlanTag; - - /* build VLAN_SetDefaultRxVID message */ - FILL_SETDEFAULTRXVID_MSG(message, - IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - IX_IEEE802_1Q_VLAN_TPID, - vlanTag); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief retrieves the default port VLAN tag (the lower 3 bytes are the PVID) - * - * @param portID ID of the port - * @param vlanTag address to write the port VLAN tag (802.1Q tag) into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanTag); - - *vlanTag = ixEthDBPortInfo[portID].vlanTag; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets the VLAN tag (the lower 3 bytes are the PVID) of a - * database filtering record - * - * @param portID ID of the port - * @param vlanTag VLAN tag (802.1Q tag) - * - * Important: filtering records are automatically converted to - * IX_ETH_DB_FILTERING_VLAN record when added a VLAN tag. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) -{ - HashNode *searchResult; - MacDescriptor *descriptor; - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - descriptor = (MacDescriptor *) searchResult->data; - - /* set record type to VLAN if not already set */ - descriptor->type = IX_ETH_DB_FILTERING_VLAN_RECORD; - - /* add vlan tag */ - descriptor->recordData.filteringVlanData.ieee802_1qTag = vlanTag; - - /* transaction completed */ - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief retrieves the VLAN tag (the lower 3 bytes are the PVID) from a - * database VLAN filtering record - * - * @param portID ID of the port - * @param vlanTag address to write the VLAN tag (802.1Q tag) into - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) -{ - HashNode *searchResult; - MacDescriptor *descriptor; - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_REFERENCE(vlanTag); - - searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_FILTERING_VLAN_RECORD); - - if (searchResult == NULL) - { - return IX_ETH_DB_NO_SUCH_ADDR; - } - - descriptor = (MacDescriptor *) searchResult->data; - - /* get vlan tag */ - *vlanTag = descriptor->recordData.filteringVlanData.ieee802_1qTag; - - /* transaction completed */ - ixEthDBReleaseHashNode(searchResult); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief adds a VLAN to a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanID VLAN ID to add - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); -} - -/** - * @brief removes a VLAN from a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanID VLAN ID to remove - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - /* for safety isolate only the VLAN ID in the tag (the lower 12 bits) */ - vlanID = vlanID & IX_ETH_DB_802_1Q_VLAN_MASK; - - /* check we're not asked to remove the default port VID */ - if (vlanID == IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag)) - { - return IX_ETH_DB_NO_PERMISSION; - } - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); -} - -/** - * @brief adds or removes a VLAN range from a port's - * VLAN membership table or TTI table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * @param table VLAN set to add or remove from - * @param action ADD_VLAN or REMOVE_VLAN - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBPortVlanMembershipRangeChange(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, IxEthDBVlanSet table, UINT32 action) -{ - UINT32 setOffsetMin, setOffsetMax; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_VLAN_ID(vlanIDMin); - - IX_ETH_DB_CHECK_VLAN_ID(vlanIDMax); - - /* for safety isolate only the VLAN ID in the tags (the lower 12 bits) */ - vlanIDMin = vlanIDMin & IX_ETH_DB_802_1Q_VLAN_MASK; - vlanIDMax = vlanIDMax & IX_ETH_DB_802_1Q_VLAN_MASK; - - /* is this a range? */ - if (vlanIDMax < vlanIDMin) - { - return IX_ETH_DB_INVALID_VLAN; - } - - /* check that we're not specifically asked to remove the default port VID */ - if (action == REMOVE_VLAN && vlanIDMax == vlanIDMin && IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag) == vlanIDMin) - { - return IX_ETH_DB_NO_PERMISSION; - } - - /* compute set offsets */ - setOffsetMin = VLAN_SET_OFFSET(vlanIDMin); - setOffsetMax = VLAN_SET_OFFSET(vlanIDMax); - - /* change VLAN range */ - for (; vlanIDMin <= vlanIDMax ; vlanIDMin++) - { - /* change vlan in local membership table */ - ixEthDBLocalVlanMembershipChange(vlanIDMin, table, action); - } - - /* if the range is within one set (max 8 VLANs in one table byte) we can just update that entry in the NPE */ - if (setOffsetMin == setOffsetMax) - { - /* send updated entry to NPE */ - return ixEthDBVlanTableEntryUpdate(portID, setOffsetMin); - } - else - { - /* update a zone of the membership/transmit tag info table */ - return ixEthDBVlanTableRangeUpdate(portID); - } -} - -/** - * @brief adds a VLAN range to a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); -} - -/** - * @brief removes a VLAN range from a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanIDMin start of the VLAN range - * @param vlanIDMax end of the VLAN range - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); -} - -/** - * @brief sets a port's VLAN membership table or TTI table and - * updates the NPE VLAN configuration - * - * @param portID ID of the port - * @param portVlanTable port VLAN table to set - * @param vlanSet new set contents - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - memcpy(portVlanTable, vlanSet, sizeof (IxEthDBVlanSet)); - - return ixEthDBVlanTableRangeUpdate(portID); -} - -/** - * @brief retireves a port's VLAN membership table or TTI table - * - * @param portID ID of the port - * @param portVlanTable port VLAN table to retrieve - * @param vlanSet address to - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - memcpy(vlanSet, portVlanTable, sizeof (IxEthDBVlanSet)); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanSet new VLAN membership table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IxEthDBVlanId vlanID; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - /* set the bit corresponding to the PVID just in case */ - vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); - vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); - - return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); -} - -/** - * @brief retrieves a port's VLAN membership table - * - * @param portID ID of the port - * @param vlanSet location to store the port's VLAN membership table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); -} - -/** - * @brief enables or disables Egress tagging for one VLAN ID - * - * @param portID ID of the port - * @param vlanID VLAN ID to enable or disable Egress tagging on - * @param enabled true to enable and false to disable tagging - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); -} - -/** - * @brief retrieves the Egress tagging status for one VLAN ID - * - * @param portID ID of the port - * @param vlanID VLAN ID to retrieve the tagging status for - * @param enabled location to store the tagging status - * (true - tagging enabled, false - tagging disabled) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(enabled); - - IX_ETH_DB_CHECK_VLAN_ID(vlanID); - - *enabled = ((ixEthDBPortInfo[portID].transmitTaggingInfo[VLAN_SET_OFFSET(vlanID)] & (1 << VLAN_SET_MASK(vlanID))) != 0); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief enables or disables Egress VLAN tagging for a VLAN range - * - * @param portID ID of the port - * @param vlanIDMin start of VLAN range - * @param vlanIDMax end of VLAN range - * @param enabled true to enable or false to disable VLAN tagging - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); -} - -/** - * @brief sets the Egress VLAN tagging table (the Transmit Tagging - * Information table) - * - * @param portID ID of the port - * @param vlanSet new TTI table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IxEthDBVlanId vlanID; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(vlanSet); - - /* set the PVID bit just in case */ - vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); - vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); - - return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); -} - -/** - * @brief retrieves the Egress VLAN tagging table (the Transmit - * Tagging Information table) - * - * @param portID ID of the port - * @param vlanSet location to store the port's TTI table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); -} - -/** - * @brief sends the NPE the updated frame filter and default - * Ingress tagging - * - * @param portID ID of the port - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PRIVATE -IxEthDBStatus ixEthDBIngressVlanModeUpdate(IxEthDBPortId portID) -{ - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - IxNpeMhMessage message; - IX_STATUS result; - - FILL_SETRXTAGMODE_MSG(message, portID, portInfo->npeFrameFilter, portInfo->npeTaggingAction); - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the default Ingress tagging behavior - * - * @param portID ID of the port - * @param taggingAction default tagging behavior - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) -{ - PortInfo *portInfo; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - portInfo = &ixEthDBPortInfo[portID]; - - if (taggingAction == IX_ETH_DB_PASS_THROUGH) - { - portInfo->npeTaggingAction = 0x00; - } - else if (taggingAction == IX_ETH_DB_ADD_TAG) - { - portInfo->npeTaggingAction = 0x02; - } - else if (taggingAction == IX_ETH_DB_REMOVE_TAG) - { - portInfo->npeTaggingAction = 0x01; - } - else - { - return IX_ETH_DB_INVALID_ARG; - } - - portInfo->taggingAction = taggingAction; - - return ixEthDBIngressVlanModeUpdate(portID); -} - -/** - * @brief retrieves the default Ingress tagging behavior of a port - * - * @param portID ID of the port - * @param taggingAction location to save the default tagging behavior - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(taggingAction); - - *taggingAction = ixEthDBPortInfo[portID].taggingAction; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets the Ingress acceptable frame type filter - * - * @param portID ID of the port - * @param frameFilter acceptable frame type filter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) -{ - PortInfo *portInfo; - IxEthDBStatus result = IX_ETH_DB_SUCCESS; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* check parameter range - the ORed value of the valid values is 0x7 - a value having extra bits is invalid */ - if ((frameFilter | 0x7) != 0x7 || frameFilter == 0) - { - return IX_ETH_DB_INVALID_ARG; - } - - portInfo = &ixEthDBPortInfo[portID]; - - portInfo->frameFilter = frameFilter; - portInfo->npeFrameFilter = 0; /* allow all by default */ - - /* if accepting priority tagged but not all VLAN tagged - set the membership table to contain only VLAN ID 0 - hence remove vlans 1-4094 and add VLAN ID 0 */ - if (((frameFilter & IX_ETH_DB_PRIORITY_TAGGED_FRAMES) != 0) - && ((frameFilter & IX_ETH_DB_VLAN_TAGGED_FRAMES) == 0)) - { - result = ixEthDBPortVlanMembershipRangeChange(portID, - 1, IX_ETH_DB_802_1Q_MAX_VLAN_ID, portInfo->vlanMembership, REMOVE_VLAN); - - if (result == IX_ETH_DB_SUCCESS) - { - ixEthDBLocalVlanMembershipChange(0, portInfo->vlanMembership, ADD_VLAN); - result = ixEthDBVlanTableRangeUpdate(portID); - } - } - - /* untagged only? */ - if (frameFilter == IX_ETH_DB_UNTAGGED_FRAMES) - { - portInfo->npeFrameFilter = 0x01; - } - - /* tagged only? */ - if ((frameFilter & IX_ETH_DB_UNTAGGED_FRAMES) == 0) - { - portInfo->npeFrameFilter = 0x02; - } - - if (result == IX_ETH_DB_SUCCESS) - { - result = ixEthDBIngressVlanModeUpdate(portID); - } - - return result; -} - -/** - * @brief retrieves the acceptable frame type filter for a port - * - * @param portID ID of the port - * @param frameFilter location to store the frame filter - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(frameFilter); - - *frameFilter = ixEthDBPortInfo[portID].frameFilter; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sends an NPE the updated configuration related - * to one QoS priority (associated traffic class and AQM mapping) - * - * @param portID ID of the port - * @param classIndex QoS priority (traffic class index) - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex) -{ - IxNpeMhMessage message; - IX_STATUS result; - - UINT32 trafficClass = ixEthDBPortInfo[portID].priorityTable[classIndex]; - UINT32 aqmQueue = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[trafficClass]; - - FILL_SETRXQOSENTRY(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), classIndex, trafficClass, aqmQueue); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief sets the priority mapping table - * - * @param portID ID of the port - * @param priorityTable new priority mapping table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) -{ - UINT32 classIndex; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(priorityTable); - - for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) - { - /* check range */ - if (priorityTable[classIndex] >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - } - - /* set new traffic classes */ - for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) - { - ixEthDBPortInfo[portID].priorityTable[classIndex] = priorityTable[classIndex]; - - if (ixEthDBUpdateTrafficClass(portID, classIndex) != IX_ETH_DB_SUCCESS) - { - return IX_ETH_DB_FAIL; - } - } - - return IX_ETH_DB_SUCCESS; - } - -/** - * @brief retrieves a port's priority mapping table - * - * @param portID ID of the port - * @param priorityTable location to store the priority table - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(priorityTable); - - memcpy(priorityTable, ixEthDBPortInfo[portID].priorityTable, sizeof (IxEthDBPriorityTable)); - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief sets one QoS priority => traffic class mapping - * - * @param portID ID of the port - * @param userPriority QoS (user) priority - * @param trafficClass associated traffic class - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - /* check ranges for userPriority and trafficClass */ - if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT || trafficClass >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - - ixEthDBPortInfo[portID].priorityTable[userPriority] = trafficClass; - - return ixEthDBUpdateTrafficClass(portID, userPriority); -} - -/** - * @brief retrieves one QoS priority => traffic class mapping - * - * @param portID ID of the port - * @param userPriority QoS (user) priority - * @param trafficClass location to store the associated traffic class - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - IX_ETH_DB_CHECK_REFERENCE(trafficClass); - - /* check userPriority range */ - if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT) - { - return IX_ETH_DB_INVALID_PRIORITY; - } - - *trafficClass = ixEthDBPortInfo[portID].priorityTable[userPriority]; - - return IX_ETH_DB_SUCCESS; -} - -/** - * @brief enables or disables the source port extraction - * from the VLAN TPID field - * - * @param portID ID of the port - * @param enable true to enable or false to disable - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed successfully - * or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) -{ - IxNpeMhMessage message; - IX_STATUS result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); - - FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} |