diff options
Diffstat (limited to 'drivers/net/e1000.c')
| -rw-r--r-- | drivers/net/e1000.c | 34 |
1 files changed, 25 insertions, 9 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 96e6bb0..d5d48b1 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -126,6 +126,7 @@ static int e1000_detect_gig_phy(struct e1000_hw *hw); static void e1000_set_media_type(struct e1000_hw *hw); static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #ifndef CONFIG_E1000_NO_NVM @@ -729,7 +730,10 @@ void e1000_release_eeprom(struct e1000_hw *hw) eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); } + + e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); } + /****************************************************************************** * Reads a 16 bit word from the EEPROM. * @@ -992,10 +996,6 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC(); - swsm = E1000_READ_REG(hw, SWSM); - swsm &= ~E1000_SWSM_SMBI; - E1000_WRITE_REG(hw, SWSM, swsm); - if (hw->mac_type != e1000_80003es2lan) return E1000_SUCCESS; @@ -1102,6 +1102,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) return E1000_SUCCESS; } +/* Take ownership of the PHY */ static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) { @@ -1115,10 +1116,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) if (e1000_get_hw_eeprom_semaphore(hw)) return -E1000_ERR_SWFW_SYNC; - if (hw->mac_type == e1000_igb) - swfw_sync = E1000_READ_REG(hw, I210_SW_FW_SYNC); - else - swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); + swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); if (!(swfw_sync & (fwmask | swmask))) break; @@ -1141,6 +1139,21 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) return E1000_SUCCESS; } +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask) +{ + uint32_t swfw_sync = 0; + + DEBUGFUNC(); + while (e1000_get_hw_eeprom_semaphore(hw)) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync); + + e1000_put_hw_eeprom_semaphore(hw); +} + static bool e1000_is_second_port(struct e1000_hw *hw) { switch (hw->mac_type) { @@ -4004,7 +4017,7 @@ e1000_wait_autoneg(struct e1000_hw *hw) DEBUGFUNC(); DEBUGOUT("Waiting for Auto-Neg to complete.\n"); - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + /* We will wait for autoneg to complete or timeout to expire. */ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { /* Read the MII Status Register and wait for Auto-Neg * Complete bit to be set. @@ -4438,6 +4451,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if (hw->mac_type >= e1000_82571) mdelay(10); + } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR * bit to put the PHY into reset. Then, take it out of reset. @@ -4462,6 +4476,8 @@ e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_REG(hw, LEDCTL, led_ctrl); } + e1000_swfw_sync_release(hw, swfw); + /* Wait for FW to finish PHY configuration. */ ret_val = e1000_get_phy_cfg_done(hw); if (ret_val != E1000_SUCCESS) |