summaryrefslogtreecommitdiff
path: root/drivers/net/dc2114x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dc2114x.c')
-rw-r--r--drivers/net/dc2114x.c771
1 files changed, 771 insertions, 0 deletions
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
new file mode 100644
index 0000000..d5275dc
--- /dev/null
+++ b/drivers/net/dc2114x.c
@@ -0,0 +1,771 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_TULIP)
+
+#include <malloc.h>
+#include <net.h>
+#include <pci.h>
+
+#undef DEBUG_SROM
+#undef DEBUG_SROM2
+
+#undef UPDATE_SROM
+
+/* PCI Registers.
+ */
+#define PCI_CFDA_PSM 0x43
+
+#define CFRV_RN 0x000000f0 /* Revision Number */
+
+#define WAKEUP 0x00 /* Power Saving Wakeup */
+#define SLEEP 0x80 /* Power Saving Sleep Mode */
+
+#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */
+
+/* Ethernet chip registers.
+ */
+#define DE4X5_BMR 0x000 /* Bus Mode Register */
+#define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */
+#define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */
+#define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */
+#define DE4X5_STS 0x028 /* Status Register */
+#define DE4X5_OMR 0x030 /* Operation Mode Register */
+#define DE4X5_SICR 0x068 /* SIA Connectivity Register */
+#define DE4X5_APROM 0x048 /* Ethernet Address PROM */
+
+/* Register bits.
+ */
+#define BMR_SWR 0x00000001 /* Software Reset */
+#define STS_TS 0x00700000 /* Transmit Process State */
+#define STS_RS 0x000e0000 /* Receive Process State */
+#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
+#define OMR_SR 0x00000002 /* Start/Stop Receive */
+#define OMR_PS 0x00040000 /* Port Select */
+#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
+#define OMR_PM 0x00000080 /* Pass All Multicast */
+
+/* Descriptor bits.
+ */
+#define R_OWN 0x80000000 /* Own Bit */
+#define RD_RER 0x02000000 /* Receive End Of Ring */
+#define RD_LS 0x00000100 /* Last Descriptor */
+#define RD_ES 0x00008000 /* Error Summary */
+#define TD_TER 0x02000000 /* Transmit End Of Ring */
+#define T_OWN 0x80000000 /* Own Bit */
+#define TD_LS 0x40000000 /* Last Segment */
+#define TD_FS 0x20000000 /* First Segment */
+#define TD_ES 0x00008000 /* Error Summary */
+#define TD_SET 0x08000000 /* Setup Packet */
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define SROM_WRITE_CMD 5
+#define SROM_READ_CMD 6
+#define SROM_ERASE_CMD 7
+
+#define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */
+#define SROM_RD 0x00004000 /* Read from Boot ROM */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x4801
+#define EE_WRITE_1 0x4805
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define SROM_SR 0x00000800 /* Select Serial ROM when set */
+
+#define DT_IN 0x00000004 /* Serial Data In */
+#define DT_CLK 0x00000002 /* Serial ROM Clock */
+#define DT_CS 0x00000001 /* Serial ROM Chip Select */
+
+#define POLL_DEMAND 1
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+#define RESET_DM9102(dev) {\
+ unsigned long i;\
+ i=INL(dev, 0x0);\
+ udelay(1000);\
+ OUTL(dev, i | BMR_SWR, DE4X5_BMR);\
+ udelay(1000);\
+}
+#else
+#define RESET_DE4X5(dev) {\
+ int i;\
+ i=INL(dev, DE4X5_BMR);\
+ udelay(1000);\
+ OUTL(dev, i | BMR_SWR, DE4X5_BMR);\
+ udelay(1000);\
+ OUTL(dev, i, DE4X5_BMR);\
+ udelay(1000);\
+ for (i=0;i<5;i++) {INL(dev, DE4X5_BMR); udelay(10000);}\
+ udelay(1000);\
+}
+#endif
+
+#define START_DE4X5(dev) {\
+ s32 omr; \
+ omr = INL(dev, DE4X5_OMR);\
+ omr |= OMR_ST | OMR_SR;\
+ OUTL(dev, omr, DE4X5_OMR); /* Enable the TX and/or RX */\
+}
+
+#define STOP_DE4X5(dev) {\
+ s32 omr; \
+ omr = INL(dev, DE4X5_OMR);\
+ omr &= ~(OMR_ST|OMR_SR);\
+ OUTL(dev, omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
+}
+
+#define NUM_RX_DESC PKTBUFSRX
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ #define NUM_TX_DESC 1 /* Number of TX descriptors */
+#else
+ #define NUM_TX_DESC 4
+#endif
+#define RX_BUFF_SZ PKTSIZE_ALIGN
+
+#define TOUT_LOOP 1000000
+
+#define SETUP_FRAME_LEN 192
+#define ETH_ALEN 6
+
+struct de4x5_desc {
+ volatile s32 status;
+ u32 des1;
+ u32 buf;
+ u32 next;
+};
+
+static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(32))); /* RX descriptor ring */
+static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(32))); /* TX descriptor ring */
+static int rx_new; /* RX descriptor ring pointer */
+static int tx_new; /* TX descriptor ring pointer */
+
+static char rxRingSize;
+static char txRingSize;
+
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+static void sendto_srom(struct eth_device* dev, u_int command, u_long addr);
+static int getfrom_srom(struct eth_device* dev, u_long addr);
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr,int cmd,int cmd_len);
+static int do_read_eeprom(struct eth_device *dev,u_long ioaddr,int location,int addr_len);
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+#ifdef UPDATE_SROM
+static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value);
+static void update_srom(struct eth_device *dev, bd_t *bis);
+#endif
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static int read_srom(struct eth_device *dev, u_long ioaddr, int index);
+static void read_hw_addr(struct eth_device* dev, bd_t * bis);
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+static void send_setup_frame(struct eth_device* dev, bd_t * bis);
+
+static int dc21x4x_init(struct eth_device* dev, bd_t* bis);
+static int dc21x4x_send(struct eth_device* dev, volatile void *packet, int length);
+static int dc21x4x_recv(struct eth_device* dev);
+static void dc21x4x_halt(struct eth_device* dev);
+#ifdef CONFIG_TULIP_SELECT_MEDIA
+extern void dc21x4x_select_media(struct eth_device* dev);
+#endif
+
+#if defined(CONFIG_E500)
+#define phys_to_bus(a) (a)
+#else
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#endif
+
+static int INL(struct eth_device* dev, u_long addr)
+{
+ return le32_to_cpu(*(volatile u_long *)(addr + dev->iobase));
+}
+
+static void OUTL(struct eth_device* dev, int command, u_long addr)
+{
+ *(volatile u_long *)(addr + dev->iobase) = cpu_to_le32(command);
+}
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142 },
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ { PCI_VENDOR_ID_DAVICOM, PCI_DEVICE_ID_DAVICOM_DM9102A },
+#endif
+ { }
+};
+
+int dc21x4x_initialize(bd_t *bis)
+{
+ int idx=0;
+ int card_number = 0;
+ unsigned int cfrv;
+ unsigned char timer;
+ pci_dev_t devbusfn;
+ unsigned int iobase;
+ unsigned short status;
+ struct eth_device* dev;
+
+ while(1) {
+ devbusfn = pci_find_devices(supported, idx++);
+ if (devbusfn == -1) {
+ break;
+ }
+
+ /* Get the chip configuration revision register. */
+ pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv);
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ if ((cfrv & CFRV_RN) < DC2114x_BRK ) {
+ printf("Error: The chip is not DC21143.\n");
+ continue;
+ }
+#endif
+
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ status |=
+#ifdef CONFIG_TULIP_USE_IO
+ PCI_COMMAND_IO |
+#else
+ PCI_COMMAND_MEMORY |
+#endif
+ PCI_COMMAND_MASTER;
+ pci_write_config_word(devbusfn, PCI_COMMAND, status);
+
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_IO)) {
+ printf("Error: Can not enable I/O access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_IO)) {
+ printf("Error: Can not enable I/O access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ /* Check the latency timer for values >= 0x60. */
+ pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer);
+
+ if (timer < 0x60) {
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x60);
+ }
+
+#ifdef CONFIG_TULIP_USE_IO
+ /* read BAR for memory space access */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= PCI_BASE_ADDRESS_IO_MASK;
+#else
+ /* read BAR for memory space access */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+#endif
+ debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
+
+ dev = (struct eth_device*) malloc(sizeof *dev);
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ sprintf(dev->name, "Davicom#%d", card_number);
+#else
+ sprintf(dev->name, "dc21x4x#%d", card_number);
+#endif
+
+#ifdef CONFIG_TULIP_USE_IO
+ dev->iobase = pci_io_to_phys(devbusfn, iobase);
+#else
+ dev->iobase = pci_mem_to_phys(devbusfn, iobase);
+#endif
+ dev->priv = (void*) devbusfn;
+ dev->init = dc21x4x_init;
+ dev->halt = dc21x4x_halt;
+ dev->send = dc21x4x_send;
+ dev->recv = dc21x4x_recv;
+
+ /* Ensure we're not sleeping. */
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+
+ udelay(10 * 1000);
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ read_hw_addr(dev, bis);
+#endif
+ eth_register(dev);
+
+ card_number++;
+ }
+
+ return card_number;
+}
+
+static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
+{
+ int i;
+ int devbusfn = (int) dev->priv;
+
+ /* Ensure we're not sleeping. */
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ RESET_DM9102(dev);
+#else
+ RESET_DE4X5(dev);
+#endif
+
+ if ((INL(dev, DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
+ printf("Error: Cannot reset ethernet controller.\n");
+ return 0;
+ }
+
+#ifdef CONFIG_TULIP_SELECT_MEDIA
+ dc21x4x_select_media(dev);
+#else
+ OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR);
+#endif
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rx_ring[i].status = cpu_to_le32(R_OWN);
+ rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+ rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32) NetRxPackets[i]));
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ rx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &rx_ring[(i+1) % NUM_RX_DESC]));
+#else
+ rx_ring[i].next = 0;
+#endif
+ }
+
+ for (i=0; i < NUM_TX_DESC; i++) {
+ tx_ring[i].status = 0;
+ tx_ring[i].des1 = 0;
+ tx_ring[i].buf = 0;
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ tx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &tx_ring[(i+1) % NUM_TX_DESC]));
+#else
+ tx_ring[i].next = 0;
+#endif
+ }
+
+ rxRingSize = NUM_RX_DESC;
+ txRingSize = NUM_TX_DESC;
+
+ /* Write the end of list marker to the descriptor lists. */
+ rx_ring[rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
+ tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
+
+ /* Tell the adapter where the TX/RX rings are located. */
+ OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA);
+ OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA);
+
+ START_DE4X5(dev);
+
+ tx_new = 0;
+ rx_new = 0;
+
+ send_setup_frame(dev, bis);
+
+ return 1;
+}
+
+static int dc21x4x_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int status = -1;
+ int i;
+
+ if (length <= 0) {
+ printf("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) packet));
+ tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
+ tx_ring[tx_new].status = cpu_to_le32(T_OWN);
+
+ OUTL(dev, POLL_DEMAND, DE4X5_TPD);
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf(".%s: tx buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) {
+#if 0 /* test-only */
+ printf("TX error status = 0x%08X\n",
+ le32_to_cpu(tx_ring[tx_new].status));
+#endif
+ tx_ring[tx_new].status = 0x0;
+ goto Done;
+ }
+
+ status = length;
+
+ Done:
+ tx_new = (tx_new+1) % NUM_TX_DESC;
+ return status;
+}
+
+static int dc21x4x_recv(struct eth_device* dev)
+{
+ s32 status;
+ int length = 0;
+
+ for ( ; ; ) {
+ status = (s32)le32_to_cpu(rx_ring[rx_new].status);
+
+ if (status & R_OWN) {
+ break;
+ }
+
+ if (status & RD_LS) {
+ /* Valid frame status.
+ */
+ if (status & RD_ES) {
+
+ /* There was an error.
+ */
+ printf("RX error status = 0x%08X\n", status);
+ } else {
+ /* A valid frame received.
+ */
+ length = (le32_to_cpu(rx_ring[rx_new].status) >> 16);
+
+ /* Pass the packet up to the protocol
+ * layers.
+ */
+ NetReceive(NetRxPackets[rx_new], length - 4);
+ }
+
+ /* Change buffer ownership for this frame, back
+ * to the adapter.
+ */
+ rx_ring[rx_new].status = cpu_to_le32(R_OWN);
+ }
+
+ /* Update entry information.
+ */
+ rx_new = (rx_new + 1) % rxRingSize;
+ }
+
+ return length;
+}
+
+static void dc21x4x_halt(struct eth_device* dev)
+{
+ int devbusfn = (int) dev->priv;
+
+ STOP_DE4X5(dev);
+ OUTL(dev, 0, DE4X5_SICR);
+
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, SLEEP);
+}
+
+static void send_setup_frame(struct eth_device* dev, bd_t *bis)
+{
+ int i;
+ char setup_frame[SETUP_FRAME_LEN];
+ char *pa = &setup_frame[0];
+
+ memset(pa, 0xff, SETUP_FRAME_LEN);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ *(pa + (i & 1)) = dev->enetaddr[i];
+ if (i & 0x01) {
+ pa += 4;
+ }
+ }
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) &setup_frame[0]));
+ tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_SET| SETUP_FRAME_LEN);
+ tx_ring[tx_new].status = cpu_to_le32(T_OWN);
+
+ OUTL(dev, POLL_DEMAND, DE4X5_TPD);
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (le32_to_cpu(tx_ring[tx_new].status) != 0x7FFFFFFF) {
+ printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[tx_new].status));
+ }
+ tx_new = (tx_new+1) % NUM_TX_DESC;
+
+Done:
+ return;
+}
+
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+/* SROM Read and write routines.
+ */
+static void
+sendto_srom(struct eth_device* dev, u_int command, u_long addr)
+{
+ OUTL(dev, command, addr);
+ udelay(1);
+}
+
+static int
+getfrom_srom(struct eth_device* dev, u_long addr)
+{
+ s32 tmp;
+
+ tmp = INL(dev, addr);
+ udelay(1);
+
+ return tmp;
+}
+
+/* Note: this routine returns extra data bits for size detection. */
+static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (SROM_READ_CMD << addr_len);
+
+ sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM read at %d ", location);
+#endif
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval, ioaddr);
+ udelay(10);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK, ioaddr);
+ udelay(10);
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev, ioaddr) & 15);
+#endif
+ retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0);
+ }
+
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+#ifdef DEBUG_SROM2
+ printf(" :%X:", getfrom_srom(dev, ioaddr) & 15);
+#endif
+
+ for (i = 16; i > 0; i--) {
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
+ udelay(10);
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev, ioaddr) & 15);
+#endif
+ retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+ udelay(10);
+ }
+
+ /* Terminate the EEPROM access. */
+ sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
+
+#ifdef DEBUG_SROM2
+ printf(" EEPROM value at %d is %5.5x.\n", location, retval);
+#endif
+
+ return retval;
+}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+
+/* This executes a generic EEPROM command, typically a write or write
+ * enable. It returns the data output from the EEPROM, and thus may
+ * also be used for reads.
+ */
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int cmd_len)
+{
+ unsigned retval = 0;
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM op 0x%x: ", cmd);
+#endif
+
+ sendto_srom(dev,SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
+
+ /* Shift the command bits out. */
+ do {
+ short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+ sendto_srom(dev,dataval, ioaddr);
+ udelay(10);
+
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev,ioaddr) & 15);
+#endif
+
+ sendto_srom(dev,dataval | DT_CLK, ioaddr);
+ udelay(10);
+ retval = (retval << 1) | ((getfrom_srom(dev,ioaddr) & EE_DATA_READ) ? 1 : 0);
+ } while (--cmd_len >= 0);
+ sendto_srom(dev,SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+ /* Terminate the EEPROM access. */
+ sendto_srom(dev,SROM_RD | SROM_SR, ioaddr);
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM result is 0x%5.5x.\n", retval);
+#endif
+
+ return retval;
+}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static int read_srom(struct eth_device *dev, u_long ioaddr, int index)
+{
+ int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6;
+
+ return do_eeprom_cmd(dev, ioaddr,
+ (((SROM_READ_CMD << ee_addr_size) | index) << 16)
+ | 0xffff, 3 + ee_addr_size + 16);
+}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+
+#ifdef UPDATE_SROM
+static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value)
+{
+ int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6;
+ int i;
+ unsigned short newval;
+
+ udelay(10*1000); /* test-only */
+
+#ifdef DEBUG_SROM
+ printf("ee_addr_size=%d.\n", ee_addr_size);
+ printf("Writing new entry 0x%4.4x to offset %d.\n", new_value, index);
+#endif
+
+ /* Enable programming modes. */
+ do_eeprom_cmd(dev, ioaddr, (0x4f << (ee_addr_size-4)), 3+ee_addr_size);
+
+ /* Do the actual write. */
+ do_eeprom_cmd(dev, ioaddr,
+ (((SROM_WRITE_CMD<<ee_addr_size)|index) << 16) | new_value,
+ 3 + ee_addr_size + 16);
+
+ /* Poll for write finished. */
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+ for (i = 0; i < 10000; i++) /* Typical 2000 ticks */
+ if (getfrom_srom(dev, ioaddr) & EE_DATA_READ)
+ break;
+
+#ifdef DEBUG_SROM
+ printf(" Write finished after %d ticks.\n", i);
+#endif
+
+ /* Disable programming. */
+ do_eeprom_cmd(dev, ioaddr, (0x40 << (ee_addr_size-4)), 3 + ee_addr_size);
+
+ /* And read the result. */
+ newval = do_eeprom_cmd(dev, ioaddr,
+ (((SROM_READ_CMD<<ee_addr_size)|index) << 16)
+ | 0xffff, 3 + ee_addr_size + 16);
+#ifdef DEBUG_SROM
+ printf(" New value at offset %d is %4.4x.\n", index, newval);
+#endif
+ return 1;
+}
+#endif
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static void read_hw_addr(struct eth_device *dev, bd_t *bis)
+{
+ u_short tmp, *p = (u_short *)(&dev->enetaddr[0]);
+ int i, j = 0;
+
+ for (i = 0; i < (ETH_ALEN >> 1); i++) {
+ tmp = read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1) + i));
+ *p = le16_to_cpu(tmp);
+ j += *p++;
+ }
+
+ if ((j == 0) || (j == 0x2fffd)) {
+ memset (dev->enetaddr, 0, ETH_ALEN);
+ debug ("Warning: can't read HW address from SROM.\n");
+ goto Done;
+ }
+
+ return;
+
+Done:
+#ifdef UPDATE_SROM
+ update_srom(dev, bis);
+#endif
+ return;
+}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+
+#ifdef UPDATE_SROM
+static void update_srom(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ static unsigned short eeprom[0x40] = {
+ 0x140b, 0x6610, 0x0000, 0x0000, /* 00 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 04 */
+ 0x00a3, 0x0103, 0x0000, 0x0000, /* 08 */
+ 0x0000, 0x1f00, 0x0000, 0x0000, /* 0c */
+ 0x0108, 0x038d, 0x0000, 0x0000, /* 10 */
+ 0xe078, 0x0001, 0x0040, 0x0018, /* 14 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 18 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 1c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 20 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 2c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 34 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 38 */
+ 0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */
+ };
+
+ /* Ethernet Addr... */
+ eeprom[0x0a] = ((bis->bi_enetaddr[1] & 0xff) << 8) | (bis->bi_enetaddr[0] & 0xff);
+ eeprom[0x0b] = ((bis->bi_enetaddr[3] & 0xff) << 8) | (bis->bi_enetaddr[2] & 0xff);
+ eeprom[0x0c] = ((bis->bi_enetaddr[5] & 0xff) << 8) | (bis->bi_enetaddr[4] & 0xff);
+
+ for (i=0; i<0x40; i++)
+ {
+ write_srom(dev, DE4X5_APROM, i, eeprom[i]);
+ }
+}
+#endif /* UPDATE_SROM */
+
+#endif