summaryrefslogtreecommitdiff
path: root/drivers/net/bfin_mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bfin_mac.c')
-rw-r--r--drivers/net/bfin_mac.c284
1 files changed, 134 insertions, 150 deletions
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a620fcc..a622ca1 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -12,6 +12,8 @@
#include <netdev.h>
#include <command.h>
#include <malloc.h>
+#include <miiphy.h>
+#include <linux/mii.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/dma.h>
@@ -43,8 +45,6 @@ ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
static u16 txIdx; /* index of the current RX buffer */
static u16 rxIdx; /* index of the current TX buffer */
-u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */
-
/* DMAx_CONFIG values at DMA Restart */
const ADI_DMA_CONFIG_REG rxdmacfg = {
.b_DMA_EN = 1, /* enabled */
@@ -70,10 +70,38 @@ const ADI_DMA_CONFIG_REG txdmacfg = {
.b_FLOW = 7 /* large desc flow */
};
+static int bfin_miiphy_wait(void)
+{
+ /* poll the STABUSY bit */
+ while (bfin_read_EMAC_STAADD() & STABUSY)
+ continue;
+ return 0;
+}
+
+static int bfin_miiphy_read(char *devname, uchar addr, uchar reg, ushort *val)
+{
+ if (bfin_miiphy_wait())
+ return 1;
+ bfin_write_EMAC_STAADD(SET_PHYAD(addr) | SET_REGAD(reg) | STABUSY);
+ if (bfin_miiphy_wait())
+ return 1;
+ *val = bfin_read_EMAC_STADAT();
+ return 0;
+}
+
+static int bfin_miiphy_write(char *devname, uchar addr, uchar reg, ushort val)
+{
+ if (bfin_miiphy_wait())
+ return 1;
+ bfin_write_EMAC_STADAT(val);
+ bfin_write_EMAC_STAADD(SET_PHYAD(addr) | SET_REGAD(reg) | STAOP | STABUSY);
+ return 0;
+}
+
int bfin_EMAC_initialize(bd_t *bis)
{
struct eth_device *dev;
- dev = (struct eth_device *)malloc(sizeof(*dev));
+ dev = malloc(sizeof(*dev));
if (dev == NULL)
hang();
@@ -89,6 +117,10 @@ int bfin_EMAC_initialize(bd_t *bis)
eth_register(dev);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, bfin_miiphy_read, bfin_miiphy_write);
+#endif
+
return 0;
}
@@ -182,6 +214,100 @@ static int bfin_EMAC_recv(struct eth_device *dev)
*
*************************************************************/
+/* MDC = SCLK / MDC_freq / 2 - 1 */
+#define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1)
+
+static int bfin_miiphy_init(struct eth_device *dev, int *opmode)
+{
+ u16 phydat;
+ size_t count;
+
+ /* Enable PHY output */
+ *pVR_CTL |= CLKBUFOE;
+
+ /* Set all the pins to peripheral mode */
+#ifdef CONFIG_BFIN_MAC_RMII
+ /* grab RMII pins */
+# if defined(__ADSPBF51x__)
+ *pPORTF_MUX = (*pPORTF_MUX & \
+ ~(PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
+ PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
+ *pPORTF_FER |= PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
+ *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
+ *pPORTG_FER |= PG0 | PG1 | PG2;
+# elif defined(__ADSPBF52x__)
+ *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
+ *pPORTG_FER |= PG14 | PG15;
+ *pPORTH_MUX = (*pPORTH_MUX & ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK)) | \
+ PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2;
+ *pPORTH_FER |= PH0 | PH1 | PH2 | PH3 | PH4 | PH5 | PH6 | PH7 | PH8;
+# else
+ *pPORTH_FER |= PH0 | PH1 | PH4 | PH5 | PH6 | PH8 | PH9 | PH14 | PH15;
+# endif
+#else
+ /* grab MII & RMII pins */
+# if defined(__ADSPBF51x__)
+ *pPORTF_MUX = (*pPORTF_MUX & \
+ ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
+ PORT_x_MUX_0_FUNC_1 | PORT_x_MUX_1_FUNC_1 | PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
+ *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
+ *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
+ *pPORTG_FER |= PG0 | PG1 | PG2;
+# elif defined(__ADSPBF52x__)
+ *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
+ *pPORTG_FER |= PG14 | PG15;
+ *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2;
+ *pPORTH_FER = -1; /* all pins */
+# else
+ *pPORTH_FER = -1; /* all pins */
+# endif
+#endif
+
+ /* Odd word alignment for Receive Frame DMA word */
+ /* Configure checksum support and rcve frame word alignment */
+ bfin_write_EMAC_SYSCTL(RXDWA | RXCKS | SET_MDCDIV(MDC_FREQ_TO_DIV(2500000)));
+
+ /* turn on auto-negotiation and wait for link to come up */
+ bfin_miiphy_write(dev->name, PHYADDR, MII_BMCR, BMCR_ANENABLE);
+ count = 0;
+ while (1) {
+ ++count;
+ if (bfin_miiphy_read(dev->name, PHYADDR, MII_BMSR, &phydat))
+ return -1;
+ if (phydat & BMSR_LSTATUS)
+ break;
+ if (count > 30000) {
+ printf("%s: link down, check cable\n", dev->name);
+ return -1;
+ }
+ udelay(100);
+ }
+
+ /* see what kind of link we have */
+ if (bfin_miiphy_read(dev->name, PHYADDR, MII_LPA, &phydat))
+ return -1;
+ if (phydat & LPA_DUPLEX)
+ *opmode = FDMODE;
+ else
+ *opmode = 0;
+
+ bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
+
+ /* Initialize the TX DMA channel registers */
+ *pDMA2_X_COUNT = 0;
+ *pDMA2_X_MODIFY = 4;
+ *pDMA2_Y_COUNT = 0;
+ *pDMA2_Y_MODIFY = 0;
+
+ /* Initialize the RX DMA channel registers */
+ *pDMA1_X_COUNT = 0;
+ *pDMA1_X_MODIFY = 4;
+ *pDMA1_Y_COUNT = 0;
+ *pDMA1_Y_MODIFY = 0;
+
+ return 0;
+}
+
static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
{
u32 opmode;
@@ -192,14 +318,14 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
txIdx = 0;
rxIdx = 0;
-/* Initialize System Register */
- if (SetupSystemRegs(&dat) < 0)
+ /* Initialize System Register */
+ if (bfin_miiphy_init(dev, &dat) < 0)
return -1;
-/* Initialize EMAC address */
+ /* Initialize EMAC address */
bfin_EMAC_setup_addr(bd);
-/* Initialize TX and RX buffer */
+ /* Initialize TX and RX buffer */
for (i = 0; i < PKTBUFSRX; i++) {
rxbuf[i] = SetupRxBuffer(i);
if (i > 0) {
@@ -226,7 +352,7 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
*pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG);
/* Wait MII done */
- PollMdcDone();
+ bfin_miiphy_wait();
/* We enable only RX here */
/* ASTP : Enable Automatic Pad Stripping
@@ -271,148 +397,6 @@ void bfin_EMAC_setup_addr(bd_t *bd)
bd->bi_enetaddr[5] << 8;
}
-static void PollMdcDone(void)
-{
- /* poll the STABUSY bit */
- while (*pEMAC_STAADD & STABUSY) ;
-}
-
-static void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data)
-{
- PollMdcDone();
-
- *pEMAC_STADAT = Data;
-
- *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
- STAOP | STAIE | STABUSY;
-}
-
-/*********************************************************************************
- * Read an off-chip register in a PHY through the MDC/MDIO port *
- *********************************************************************************/
-static u16 RdPHYReg(u16 PHYAddr, u16 RegAddr)
-{
- u16 Data;
-
- PollMdcDone();
-
- *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
- STAIE | STABUSY;
-
- PollMdcDone();
-
- Data = (u16) * pEMAC_STADAT;
-
- PHYregs[RegAddr] = Data; /* save shadow copy */
-
- return Data;
-}
-
-#if 0 /* dead code ? */
-static void SoftResetPHY(void)
-{
- u16 phydat;
- /* set the reset bit */
- WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET);
- /* and clear it again */
- WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000);
- do {
- /* poll until reset is complete */
- phydat = RdPHYReg(PHYADDR, PHY_MODECTL);
- } while ((phydat & PHY_RESET) != 0);
-}
-#endif
-
-/* MDC = SCLK / MDC_freq / 2 - 1 */
-#define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1)
-
-static int SetupSystemRegs(int *opmode)
-{
- u16 phydat;
- int count = 0;
- /* Enable PHY output */
- *pVR_CTL |= CLKBUFOE;
- /* Set all the pins to peripheral mode */
-
-#ifdef CONFIG_BFIN_MAC_RMII
- /* grab RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = (*pPORTH_MUX & ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK)) | \
- PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2;
- *pPORTH_FER |= PH0 | PH1 | PH2 | PH3 | PH4 | PH5 | PH6 | PH7 | PH8;
-# else
- *pPORTH_FER |= PH0 | PH1 | PH4 | PH5 | PH6 | PH8 | PH9 | PH14 | PH15;
-# endif
-#else
- /* grab MII & RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_0_FUNC_1 | PORT_x_MUX_1_FUNC_1 | PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2;
- *pPORTH_FER = -1; /* all pins */
-# else
- *pPORTH_FER = -1; /* all pins */
-# endif
-#endif
-
- /* Odd word alignment for Receive Frame DMA word */
- /* Configure checksum support and rcve frame word alignment */
- *pEMAC_SYSCTL = RXDWA | RXCKS | SET_MDCDIV(MDC_FREQ_TO_DIV(2500000));
- /* auto negotiation on */
- /* full duplex */
- /* 100 Mbps */
- phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET;
- WrPHYReg(PHYADDR, PHY_MODECTL, phydat);
- do {
- udelay(1000);
- phydat = RdPHYReg(PHYADDR, PHY_MODESTAT);
- if (count > 3000) {
- printf
- ("Link is down, please check your network connection\n");
- return -1;
- }
- count++;
- } while (!(phydat & 0x0004));
-
- phydat = RdPHYReg(PHYADDR, PHY_ANLPAR);
-
- if ((phydat & 0x0100) || (phydat & 0x0040))
- *opmode = FDMODE;
- else
- *opmode = 0;
-
- *pEMAC_MMC_CTL = RSTC | CROLL;
-
- /* Initialize the TX DMA channel registers */
- *pDMA2_X_COUNT = 0;
- *pDMA2_X_MODIFY = 4;
- *pDMA2_Y_COUNT = 0;
- *pDMA2_Y_MODIFY = 0;
-
- /* Initialize the RX DMA channel registers */
- *pDMA1_X_COUNT = 0;
- *pDMA1_X_MODIFY = 4;
- *pDMA1_Y_COUNT = 0;
- *pDMA1_Y_MODIFY = 0;
- return 0;
-}
-
ADI_ETHER_BUFFER *SetupRxBuffer(int no)
{
ADI_ETHER_FRAME_BUFFER *frmbuf;