diff options
Diffstat (limited to 'drivers/net/ax88180.h')
| -rw-r--r-- | drivers/net/ax88180.h | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h new file mode 100644 index 0000000..5254e7d --- /dev/null +++ b/drivers/net/ax88180.h @@ -0,0 +1,412 @@ +/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */ +/* + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _AX88180_H_ +#define _AX88180_H_ + +#include <asm/types.h> +#include <config.h> + +typedef enum _ax88180_link_state { + INS_LINK_DOWN, + INS_LINK_UP, + INS_LINK_UNKNOWN +} ax88180_link_state; + +struct ax88180_private { + unsigned char BusWidth; + unsigned char PadSize; + unsigned short PhyAddr; + unsigned short PhyID0; + unsigned short FirstTxDesc; + unsigned short NextTxDesc; + ax88180_link_state LinkState; +}; + +#define BUS_WIDTH_16 1 +#define BUS_WIDTH_32 2 + +#define ENABLE_JUMBO 1 +#define DISABLE_JUMBO 0 + +#define ENABLE_BURST 1 +#define DISABLE_BURST 0 + +#define NORMAL_RX_MODE 0 +#define RX_LOOPBACK_MODE 1 +#define RX_INIFINIT_LOOP_MODE 2 +#define TX_INIFINIT_LOOP_MODE 3 + +#define DEFAULT_ETH_MTU 1500 + +/* Jumbo packet size 4086 bytes included 4 bytes CRC*/ +#define MAX_JUMBO_MTU 4072 + +/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */ +#define MAX_TX_JUMBO_SIZE 4086 + +/* Max Rx Jumbo size is 15K Bytes */ +#define MAX_RX_SIZE 0x3C00 + +#define MARVELL_88E1111_PHYADDR 0x18 +#define MARVELL_88E1111_PHYIDR0 0x0141 + +#define CICADA_CIS8201_PHYADDR 0x01 +#define CICADA_CIS8201_PHYIDR0 0x000F + +#define MEDIA_AUTO 0 +#define MEDIA_1000FULL 1 +#define MEDIA_1000HALF 2 +#define MEDIA_100FULL 3 +#define MEDIA_100HALF 4 +#define MEDIA_10FULL 5 +#define MEDIA_10HALF 6 +#define MEDIA_UNKNOWN 7 + +#define AUTO_MEDIA 0 +#define FORCE_MEDIA 1 + +#define TXDP_MASK 3 +#define TXDP0 0 +#define TXDP1 1 +#define TXDP2 2 +#define TXDP3 3 + +#define CMD_MAP_SIZE 0x100 + +#if defined (CONFIG_DRIVER_AX88180_16BIT) + #define AX88180_MEMORY_SIZE 0x00004000 + #define START_BASE 0x1000 + + #define RX_BUF_SIZE 0x1000 + #define TX_BUF_SIZE 0x0F00 + + #define TX_BASE START_BASE + #define CMD_BASE (TX_BASE + TX_BUF_SIZE) + #define RX_BASE (CMD_BASE + CMD_MAP_SIZE) +#else + #define AX88180_MEMORY_SIZE 0x00010000 + + #define RX_BUF_SIZE 0x8000 + #define TX_BUF_SIZE 0x7C00 + + #define RX_BASE 0x0000 + #define TX_BASE (RX_BASE + RX_BUF_SIZE) + #define CMD_BASE (TX_BASE + TX_BUF_SIZE) +#endif + +/* AX88180 Memory Mapping Definition */ +#define RXBUFFER_START RX_BASE + #define RX_PACKET_LEN_OFFSET 0 + #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */ +#define TXBUFFER_START TX_BASE + +/* AX88180 MAC Register Definition */ +#define DECODE (0) + #define DECODE_EN 0x00000001 +#define BASE (6) +#define CMD (CMD_BASE + 0x0000) + #define WAKEMOD 0x00000001 + #define TXEN 0x00000100 + #define RXEN 0x00000200 + #define DEFAULT_CMD WAKEMOD +#define IMR (CMD_BASE + 0x0004) + #define IMR_RXBUFFOVR 0x00000001 + #define IMR_WATCHDOG 0x00000002 + #define IMR_TX 0x00000008 + #define IMR_RX 0x00000010 + #define IMR_PHY 0x00000020 + #define CLEAR_IMR 0x00000000 + #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\ + IMR_RXBUFFOVR | IMR_WATCHDOG) +#define ISR (CMD_BASE + 0x0008) + #define ISR_RXBUFFOVR 0x00000001 + #define ISR_WATCHDOG 0x00000002 + #define ISR_TX 0x00000008 + #define ISR_RX 0x00000010 + #define ISR_PHY 0x00000020 +#define TXCFG (CMD_BASE + 0x0010) + #define AUTOPAD_CRC 0x00000050 + #define DEFAULT_TXCFG AUTOPAD_CRC +#define TXCMD (CMD_BASE + 0x0014) + #define TXCMD_TXDP_MASK 0x00006000 + #define TXCMD_TXDP0 0x00000000 + #define TXCMD_TXDP1 0x00002000 + #define TXCMD_TXDP2 0x00004000 + #define TXCMD_TXDP3 0x00006000 + #define TX_START_WRITE 0x00008000 + #define TX_STOP_WRITE 0x00000000 + #define DEFAULT_TXCMD 0x00000000 +#define TXBS (CMD_BASE + 0x0018) + #define TXDP0_USED 0x00000001 + #define TXDP1_USED 0x00000002 + #define TXDP2_USED 0x00000004 + #define TXDP3_USED 0x00000008 + #define DEFAULT_TXBS 0x00000000 +#define TXDES0 (CMD_BASE + 0x0020) + #define TXDPx_ENABLE 0x00008000 + #define TXDPx_LEN_MASK 0x00001FFF + #define DEFAULT_TXDES0 0x00000000 +#define TXDES1 (CMD_BASE + 0x0024) + #define TXDPx_ENABLE 0x00008000 + #define TXDPx_LEN_MASK 0x00001FFF + #define DEFAULT_TXDES1 0x00000000 +#define TXDES2 (CMD_BASE + 0x0028) + #define TXDPx_ENABLE 0x00008000 + #define TXDPx_LEN_MASK 0x00001FFF + #define DEFAULT_TXDES2 0x00000000 +#define TXDES3 (CMD_BASE + 0x002C) + #define TXDPx_ENABLE 0x00008000 + #define TXDPx_LEN_MASK 0x00001FFF + #define DEFAULT_TXDES3 0x00000000 +#define RXCFG (CMD_BASE + 0x0030) + #define RXBUFF_PROTECT 0x00000001 + #define RXTCPCRC_CHECK 0x00000010 + #define RXFLOW_ENABLE 0x00000100 + #define DEFAULT_RXCFG RXBUFF_PROTECT +#define RXCURT (CMD_BASE + 0x0034) + #define DEFAULT_RXCURT 0x00000000 +#define RXBOUND (CMD_BASE + 0x0038) + #define DEFAULT_RXBOUND 0x7FF //RX pages 0~7FFh +#define MACCFG0 (CMD_BASE + 0x0040) + #define MACCFG0_BIT3_0 0x00000007 + #define IPGT_VAL 0x00000150 + #define TXFLOW_ENABLE 0x00001000 + #define SPEED100 0x00008000 + #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0) +#define MACCFG1 (CMD_BASE + 0x0044) + #define RGMII_EN 0x00000002 + #define RXFLOW_EN 0x00000020 + #define FULLDUPLEX 0x00000040 + #define MAX_JUMBO_LEN 0x00000780 + #define RXJUMBO_EN 0x00000800 + #define GIGA_MODE_EN 0x00001000 + #define RXCRC_CHECK 0x00002000 + #define RXPAUSE_DA_CHECK 0x00004000 + + #define JUMBO_LEN_4K 0x00000200 + #define JUMBO_LEN_15K 0x00000780 + #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \ + RGMII_EN) + #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK) +#define MACCFG2 (CMD_BASE + 0x0048) + #define MACCFG2_BIT15_8 0x00000100 + #define JAM_LIMIT_MASK 0x000000FC + #define DEFAULT_JAM_LIMIT 0x00000064 + #define DEFAULT_MACCFG2 MACCFG2_BIT15_8 +#define MACCFG3 (CMD_BASE + 0x004C) + #define IPGR2_VAL 0x0000000E + #define IPGR1_VAL 0x00000600 + #define NOABORT 0x00008000 + #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL) +#define TXPAUT (CMD_BASE + 0x0054) + #define DEFAULT_TXPAUT 0x001FE000 +#define RXBTHD0 (CMD_BASE + 0x0058) + #define DEFAULT_RXBTHD0 0x00000300 +#define RXBTHD1 (CMD_BASE + 0x005C) + #define DEFAULT_RXBTHD1 0x00000600 +#define RXFULTHD (CMD_BASE + 0x0060) + #define DEFAULT_RXFULTHD 0x00000100 +#define MISC (CMD_BASE + 0x0068) + /* Normal operation mode */ + #define MISC_NORMAL 0x00000003 + /* Clear bit 0 to reset MAC */ + #define MISC_RESET_MAC 0x00000002 + /* Clear bit 1 to reset PHY */ + #define MISC_RESET_PHY 0x00000001 + /* Clear bit 0 and 1 to reset MAC and PHY */ + #define MISC_RESET_MAC_PHY 0x00000000 + #define DEFAULT_MISC MISC_NORMAL +#define MACID0 (CMD_BASE + 0x0070) +#define MACID1 (CMD_BASE + 0x0074) +#define MACID2 (CMD_BASE + 0x0078) +#define TXLEN (CMD_BASE + 0x007C) + #define DEFAULT_TXLEN 0x000005FC +#define RXFILTER (CMD_BASE + 0x0080) + #define RX_RXANY 0x00000001 + #define RX_MULTICAST 0x00000002 + #define RX_UNICAST 0x00000004 + #define RX_BROADCAST 0x00000008 + #define RX_MULTI_HASH 0x00000010 + #define DISABLE_RXFILTER 0x00000000 + #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST) +#define MDIOCTRL (CMD_BASE + 0x0084) + #define PHY_ADDR_MASK 0x0000001F + #define REG_ADDR_MASK 0x00001F00 + #define READ_PHY 0x00004000 + #define WRITE_PHY 0x00008000 +#define MDIODP (CMD_BASE + 0x0088) +#define GPIOCTRL (CMD_BASE + 0x008C) +#define RXINDICATOR (CMD_BASE + 0x0090) + #define RX_START_READ 0x00000001 + #define RX_STOP_READ 0x00000000 + #define DEFAULT_RXINDICATOR RX_STOP_READ +#define TXST (CMD_BASE + 0x0094) +#define MDCCLKPAT (CMD_BASE + 0x00A0) +#define RXIPCRCCNT (CMD_BASE + 0x00A4) +#define RXCRCCNT (CMD_BASE + 0x00A8) +#define TXFAILCNT (CMD_BASE + 0x00AC) +#define PROMDP (CMD_BASE + 0x00B0) +#define PROMCTRL (CMD_BASE + 0x00B4) + #define RELOAD_EEPROM 0x00000200 +#define MAXRXLEN (CMD_BASE + 0x00B8) +#define HASHTAB0 (CMD_BASE + 0x00C0) +#define HASHTAB1 (CMD_BASE + 0x00C4) +#define HASHTAB2 (CMD_BASE + 0x00C8) +#define HASHTAB3 (CMD_BASE + 0x00CC) +#define DOGTHD0 (CMD_BASE + 0x00E0) + #define DEFAULT_DOGTHD0 0x0000FFFF +#define DOGTHD1 (CMD_BASE + 0x00E4) + #define START_WATCHDOG_TIMER 0x00008000 + #define DEFAULT_DOGTHD1 0x00000FFF +#define SOFTRST (CMD_BASE + 0x00EC) + #define SOFTRST_NORMAL 0x00000003 + #define SOFTRST_RESET_MAC 0x00000002 + +/* External PHY Register Definition */ +#define BMCR 0x0000 + #define LINE_SPEED_MSB 0x0040 + #define DUPLEX_MODE 0x0100 + #define RESTART_AUTONEG 0x0200 + #define POWER_DOWN 0x0800 + #define AUTONEG_EN 0x1000 + #define LINE_SPEED_LSB 0x2000 + #define PHY_RESET 0x8000 + + #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\ + DUPLEX_MODE) + #define BMCR_SPEED_1000 LINE_SPEED_MSB + #define BMCR_SPEED_100 LINE_SPEED_LSB + #define BMCR_SPEED_10 0x0000 + + #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE) + #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE) + #define BMCR_100HALF BMCR_SPEED_100 + #define BMCR_10FULL DUPLEX_MODE + #define BMCR_10HALF 0x0000 +#define BMSR 0x0001 + #define LINKOK 0x0004 + #define AUTONEG_ENABLE_STS 0x0008 + #define AUTONEG_COMPLETE 0x0020 +#define PHYIDR0 0x0002 +#define PHYIDR1 0x0003 +#define ANAR 0x0004 + #define ANAR_PAUSE 0x0400 + #define ANAR_100FULL 0x0100 + #define ANAR_100HALF 0x0080 + #define ANAR_10FULL 0x0040 + #define ANAR_10HALF 0x0020 + #define ANAR_8023BIT 0x0001 +#define ANLPAR 0x0005 +#define ANER 0x0006 +#define AUX_1000_CTRL 0x0009 + #define ENABLE_1000HALF 0x0100 + #define ENABLE_1000FULL 0x0200 + #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL) +#define AUX_1000_STATUS 0x000A + #define LP_1000HALF 0x0400 + #define LP_1000FULL 0x0800 + +/* Marvell 88E1111 Gigabit PHY Register Definition */ +#define M88_SSR 0x0011 + #define SSR_SPEED_MASK 0xC000 + #define SSR_SPEED_1000 0x8000 + #define SSR_SPEED_100 0x4000 + #define SSR_SPEED_10 0x0000 + #define SSR_DUPLEX 0x2000 + #define SSR_MEDIA_RESOLVED_OK 0x0800 + + #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX) + #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX) + #define SSR_1000HALF SSR_SPEED_1000 + #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX) + #define SSR_100HALF SSR_SPEED_100 + #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX) + #define SSR_10HALF SSR_SPEED_10 +#define M88_IER 0x0012 + #define LINK_CHANGE_INT 0x0400 +#define M88_ISR 0x0013 + #define LINK_CHANGE_STATUS 0x0400 +#define M88_EXT_SCR 0x0014 + #define RGMII_RXCLK_DELAY 0x0080 + #define RGMII_TXCLK_DELAY 0x0002 + #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY) +#define M88_EXT_SSR 0x001B + #define HWCFG_MODE_MASK 0x000F + #define RGMII_COPPER_MODE 0x000B + +/* CICADA CIS8201 Gigabit PHY Register Definition */ +#define CIS_IMR 0x0019 + #define CIS_INT_ENABLE 0x8000 + #define CIS_LINK_CHANGE_INT 0x2000 +#define CIS_ISR 0x001A + #define CIS_INT_PENDING 0x8000 + #define CIS_LINK_CHANGE_STATUS 0x2000 +#define CIS_AUX_CTRL_STATUS 0x001C + #define CIS_AUTONEG_COMPLETE 0x8000 + #define CIS_SPEED_MASK 0x0018 + #define CIS_SPEED_1000 0x0010 + #define CIS_SPEED_100 0x0008 + #define CIS_SPEED_10 0x0000 + #define CIS_DUPLEX 0x0020 + + #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX) + #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX) + #define CIS_1000HALF CIS_SPEED_1000 + #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX) + #define CIS_100HALF CIS_SPEED_100 + #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX) + #define CIS_10HALF CIS_SPEED_10 + #define CIS_SMI_PRIORITY 0x0004 + +static inline unsigned short INW (struct eth_device *dev, unsigned long addr) +{ + return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase)); +} + +static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) +{ + *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command); +} + +/* + Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer +*/ +#if defined (CONFIG_DRIVER_AX88180_16BIT) +static inline unsigned short READ_RXBUF (struct eth_device *dev) +{ + return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase)); +} + +static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) +{ + *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data); +} +#else +static inline unsigned long READ_RXBUF (struct eth_device *dev) +{ + return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase)); +} + +static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) +{ + *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data); +} +#endif + +#endif /* _AX88180_H_ */ |