diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/cfi_flash.c | 101 | ||||
| -rw-r--r-- | drivers/mtd/mtdpart.c | 14 | ||||
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_util.c | 68 | ||||
| -rw-r--r-- | drivers/mtd/ubi/build.c | 8 | ||||
| -rw-r--r-- | drivers/mtd/ubi/ubi.h | 4 | ||||
| -rw-r--r-- | drivers/mtd/ubi/wl.c | 1 |
7 files changed, 155 insertions, 43 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 60dbb78..cf10b0d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -210,9 +210,11 @@ unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect) static inline void * flash_map (flash_info_t * info, flash_sect_t sect, uint offset) { - unsigned int byte_offset = offset * info->portwidth; + unsigned int byte_offset = offset * info->portwidth / info->chipwidth; + unsigned int addr = (info->start[sect] + byte_offset); + unsigned int mask = 0xffffffff << (info->portwidth - 1); - return (void *)(info->start[sect] + byte_offset); + return (void *)(uintptr_t)(addr & mask); } static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, @@ -398,6 +400,8 @@ void flash_write_cmd (flash_info_t * info, flash_sect_t sect, #endif flash_write64(cword.ll, addr); break; + default: + printf("fwc: Unknown port width %d\n", info->portwidth); } /* Ensure all the instructions are fully finished */ @@ -585,7 +589,6 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector, prompt, info->start[sector], flash_read_long (info, sector, 0)); flash_write_cmd (info, sector, 0, info->cmd_reset); - udelay(1); return ERR_TIMOUT; } udelay (1); /* also triggers watchdog */ @@ -753,12 +756,8 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) static flash_sect_t find_sector (flash_info_t * info, ulong addr) { static flash_sect_t saved_sector; /* previously found sector */ - static flash_info_t *saved_info; /* previously used flash bank */ flash_sect_t sector = saved_sector; - if ((info != saved_info) || (sector >= info->sector_count)) - sector = 0; - while ((info->start[sector] < addr) && (sector < info->sector_count - 1)) sector++; @@ -770,7 +769,6 @@ static flash_sect_t find_sector (flash_info_t * info, ulong addr) sector--; saved_sector = sector; - saved_info = info; return sector; } @@ -787,12 +785,15 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest, /* Check if Flash is (sufficiently) erased */ switch (info->portwidth) { case FLASH_CFI_8BIT: + debug("%s: 8-bit 0x%02x\n", __func__, cword.c); flag = ((flash_read8(dstaddr) & cword.c) == cword.c); break; case FLASH_CFI_16BIT: + debug("%s: 16-bit 0x%04x\n", __func__, cword.w); flag = ((flash_read16(dstaddr) & cword.w) == cword.w); break; case FLASH_CFI_32BIT: + debug("%s: 32-bit 0x%08lx\n", __func__, cword.l); flag = ((flash_read32(dstaddr) & cword.l) == cword.l); break; case FLASH_CFI_64BIT: @@ -1053,6 +1054,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_sect_t sect; int st; + debug("%s: erasing sectors %d to %d\n", __func__, s_first, s_last); + if (info->flash_id != FLASH_MAN_CFI) { puts ("Can't erase unknown flash type - aborted\n"); return 1; @@ -1162,6 +1165,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) rcode = 1; else if (flash_verbose) putc ('.'); + } else { + debug("\nSector %d is protected.\n", + info->protect[sect]); } } @@ -1857,7 +1863,7 @@ static void flash_read_cfi (flash_info_t *info, void *buf, unsigned int i; for (i = 0; i < len; i++) - p[i] = flash_read_uchar(info, start + i); + p[i] = flash_read_uchar(info, start + (i * 2)); } static void __flash_cmd_reset(flash_info_t *info) @@ -1878,21 +1884,40 @@ static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) { int cfi_offset; - /* Issue FLASH reset command */ - flash_cmd_reset(info); - for (cfi_offset=0; cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint); cfi_offset++) { + /* Issue FLASH reset command */ + flash_cmd_reset(info); flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI); - if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') - && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') - && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { + if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') && + flash_isequal(info, 0, + FLASH_OFFSET_CFI_RESP + 2, 'R') && + flash_isequal(info, 0, + FLASH_OFFSET_CFI_RESP + 4, 'Y')) { flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, sizeof(struct cfi_qry)); +#ifdef CONFIG_SYS_FLASH_INTERFACE_WIDTH + info->interface = CONFIG_SYS_FLASH_INTERFACE_WIDTH; +#else info->interface = le16_to_cpu(qry->interface_desc); - + /* Some flash chips can support multiple bus widths. + * In this case, override the interface width and + * limit it to the port width. + */ + if ((info->interface == FLASH_CFI_X8X16) && + (info->portwidth == FLASH_CFI_8BIT)) { + debug("Overriding 16-bit interface" + " width to 8-bit port width.\n"); + info->interface = FLASH_CFI_X8; + } else if ((info->interface == FLASH_CFI_X16X32) && + (info->portwidth == FLASH_CFI_16BIT)) { + debug("Overriding 16-bit interface" + " width to 16-bit port width.\n"); + info->interface = FLASH_CFI_X16; + } +#endif info->cfi_offset = flash_offset_cfi[cfi_offset]; debug ("device interface is %d\n", info->interface); @@ -1903,8 +1928,8 @@ static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) info->chipwidth << CFI_FLASH_SHIFT_WIDTH); /* calculate command offsets as in the Linux driver */ - info->addr_unlock1 = 0x555; - info->addr_unlock2 = 0x2aa; + info->addr_unlock1 = 0xaaa; + info->addr_unlock2 = 0x555; /* * modify the unlock address if we are @@ -1938,8 +1963,12 @@ static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) for (info->chipwidth = FLASH_CFI_BY8; info->chipwidth <= info->portwidth; info->chipwidth <<= 1) - if (__flash_detect_cfi(info, qry)) + if (__flash_detect_cfi(info, qry)) { + debug("Found CFI flash, portwidth %d," + " chipwidth %d\n", + info->portwidth, info->chipwidth); return 1; + } } debug ("not found\n"); return 0; @@ -1958,7 +1987,7 @@ static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry) /* CFI < 1.1, try to guess from device id */ if ((info->device_id & 0x80) != 0) cfi_reverse_geometry(qry); - } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { + } else if (flash_read_uchar(info, info->ext_addr + 0x1e) == 3) { /* CFI >= 1.1, deduct from top/bottom flag */ /* note: ext_addr is valid since cfi_version > 0 */ cfi_reverse_geometry(qry); @@ -2024,6 +2053,26 @@ static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry) } } +static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry) +{ + /* + * The M29EW devices seem to report the CFI information wrong + * when it's in 8 bit mode. + * There's an app note from Numonyx on this issue. + * So adjust the buffer size for M29EW while operating in 8-bit mode + */ + if (((qry->max_buf_write_size) > 0x8) && + (info->device_id == 0x7E) && + (info->device_id2 == 0x2201 || + info->device_id2 == 0x2301 || + info->device_id2 == 0x2801 || + info->device_id2 == 0x4801)) { + debug("Adjusted buffer size on Numonyx flash" + " M29EW family in 8 bit mode\n"); + qry->max_buf_write_size = 0x8; + } +} + /* * The following code cannot be run from FLASH! * @@ -2054,14 +2103,15 @@ ulong flash_get_size (phys_addr_t base, int banknum) if (flash_detect_cfi (info, &qry)) { info->vendor = le16_to_cpu(qry.p_id); - info->ext_addr = le16_to_cpu(qry.p_adr); + info->ext_addr = le16_to_cpu(qry.p_adr) * 2; + debug("extended address is 0x%x\n", info->ext_addr); num_erase_regions = qry.num_erase_regions; if (info->ext_addr) { info->cfi_version = (ushort) flash_read_uchar (info, - info->ext_addr + 3) << 8; + info->ext_addr + 6) << 8; info->cfi_version |= (ushort) flash_read_uchar (info, - info->ext_addr + 4); + info->ext_addr + 8); } #ifdef DEBUG @@ -2105,6 +2155,9 @@ ulong flash_get_size (phys_addr_t base, int banknum) case 0x00bf: /* SST */ flash_fixup_sst(info, &qry); break; + case 0x0089: /* Numonyx */ + flash_fixup_num(info, &qry); + break; } debug ("manufacturer is %d\n", info->vendor); @@ -2112,6 +2165,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("device id is 0x%x\n", info->device_id); debug ("device id2 is 0x%x\n", info->device_id2); debug ("cfi version is 0x%04x\n", info->cfi_version); + debug("port width: %d, chipwidth: %d, interface: %d\n", + info->portwidth, info->chipwidth, info->interface); size_ratio = info->portwidth / info->chipwidth; /* if the chip is x8/x16 reduce the ratio by half */ diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 96dcda2..cbfc679 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -347,16 +347,18 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, if (mtd_mod_by_eb(cur_offset, master) != 0) { /* Round up to next erasesize */ slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize; - printk(KERN_NOTICE "Moving partition %d: " - "0x%012llx -> 0x%012llx\n", partno, - (unsigned long long)cur_offset, (unsigned long long)slave->offset); + debug("Moving partition %d: 0x%012llx -> 0x%012llx\n", + partno, (unsigned long long)cur_offset, + (unsigned long long)slave->offset); } } if (slave->mtd.size == MTDPART_SIZ_FULL) slave->mtd.size = master->size - slave->offset; - printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset, - (unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name); + debug("0x%012llx-0x%012llx : \"%s\"\n", + (unsigned long long)slave->offset, + (unsigned long long)(slave->offset + slave->mtd.size), + slave->mtd.name); /* let's do some sanity checks */ if (slave->offset >= master->size) { @@ -463,7 +465,7 @@ int add_mtd_partitions(struct mtd_info *master, if (mtd_partitions.next == NULL) INIT_LIST_HEAD(&mtd_partitions); - printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); + debug("Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); for (i = 0; i < nbparts; i++) { slave = add_one_partition(master, parts + i, i, cur_offset); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 507bbc2..eeba521 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -30,8 +30,6 @@ #define DRIVER_NAME "mxc_nand" -typedef enum {false, true} bool; - struct mxc_nand_host { struct mtd_info mtd; struct nand_chip *nand; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index ff2d348..4727f9c 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -416,11 +416,13 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, * @param nand NAND device * @param offset offset in flash * @param length image length + * @param used length of flash needed for the requested length * @return 0 if the image fits and there are no bad blocks * 1 if the image fits, but there are bad blocks * -1 if the image does not fit */ -static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length) +static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length, + size_t *used) { size_t len_excl_bad = 0; int ret = 0; @@ -442,8 +444,13 @@ static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length) ret = 1; offset += block_len; + *used += block_len; } + /* If the length is not a multiple of block_len, adjust. */ + if (len_excl_bad > length) + *used -= (len_excl_bad - length); + return ret; } @@ -476,23 +483,36 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf, * Write image to NAND flash. * Blocks that are marked bad are skipped and the is written to the next * block instead as long as the image is short enough to fit even after - * skipping the bad blocks. + * skipping the bad blocks. Due to bad blocks we may not be able to + * perform the requested write. In the case where the write would + * extend beyond the end of the NAND device, both length and actual (if + * not NULL) are set to 0. In the case where the write would extend + * beyond the limit we are passed, length is set to 0 and actual is set + * to the required length. * * @param nand NAND device * @param offset offset in flash * @param length buffer length + * @param actual set to size required to write length worth of + * buffer or 0 on error, if not NULL + * @param lim maximum size that actual may be in order to not + * exceed the buffer * @param buffer buffer to read from * @param flags flags modifying the behaviour of the write to NAND * @return 0 in case of success */ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer, int flags) + size_t *actual, loff_t lim, u_char *buffer, int flags) { int rval = 0, blocksize; size_t left_to_write = *length; + size_t used_for_write = 0; u_char *p_buffer = buffer; int need_skip; + if (actual) + *actual = 0; + #ifdef CONFIG_CMD_NAND_YAFFS if (flags & WITH_YAFFS_OOB) { if (flags & ~WITH_YAFFS_OOB) @@ -529,13 +549,23 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, return -EINVAL; } - need_skip = check_skip_len(nand, offset, *length); + need_skip = check_skip_len(nand, offset, *length, &used_for_write); + + if (actual) + *actual = used_for_write; + if (need_skip < 0) { printf("Attempt to write outside the flash area\n"); *length = 0; return -EINVAL; } + if (used_for_write > lim) { + puts("Size of write exceeds partition or device limit\n"); + *length = 0; + return -EFBIG; + } + if (!need_skip && !(flags & WITH_DROP_FFS)) { rval = nand_write(nand, offset, length, buffer); if (rval == 0) @@ -626,36 +656,58 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, * * Read image from NAND flash. * Blocks that are marked bad are skipped and the next block is read - * instead as long as the image is short enough to fit even after skipping the - * bad blocks. + * instead as long as the image is short enough to fit even after + * skipping the bad blocks. Due to bad blocks we may not be able to + * perform the requested read. In the case where the read would extend + * beyond the end of the NAND device, both length and actual (if not + * NULL) are set to 0. In the case where the read would extend beyond + * the limit we are passed, length is set to 0 and actual is set to the + * required length. * * @param nand NAND device * @param offset offset in flash * @param length buffer length, on return holds number of read bytes + * @param actual set to size required to read length worth of buffer or 0 + * on error, if not NULL + * @param lim maximum size that actual may be in order to not exceed the + * buffer * @param buffer buffer to write to * @return 0 in case of success */ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer) + size_t *actual, loff_t lim, u_char *buffer) { int rval; size_t left_to_read = *length; + size_t used_for_read = 0; u_char *p_buffer = buffer; int need_skip; if ((offset & (nand->writesize - 1)) != 0) { printf("Attempt to read non page-aligned data\n"); *length = 0; + if (actual) + *actual = 0; return -EINVAL; } - need_skip = check_skip_len(nand, offset, *length); + need_skip = check_skip_len(nand, offset, *length, &used_for_read); + + if (actual) + *actual = used_for_read; + if (need_skip < 0) { printf("Attempt to read outside the flash area\n"); *length = 0; return -EINVAL; } + if (used_for_read > lim) { + puts("Size of read exceeds partition or device limit\n"); + *length = 0; + return -EFBIG; + } + if (!need_skip) { rval = nand_read(nand, offset, length, buffer); if (!rval || rval == -EUCLEAN) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index d144ac2..a708162 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -478,19 +478,19 @@ static int attach_by_scanning(struct ubi_device *ubi) err = ubi_eba_init_scan(ubi, si); if (err) - goto out_wl; + goto out_vtbl; err = ubi_wl_init_scan(ubi, si); if (err) - goto out_vtbl; + goto out_eba; ubi_scan_destroy_si(si); return 0; +out_eba: + ubi_eba_close(ubi); out_vtbl: vfree(ubi->vtbl); -out_wl: - ubi_wl_close(ubi); out_si: ubi_scan_destroy_si(si); return err; diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 14c3a5f..044e849 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -59,7 +59,11 @@ #define UBI_NAME_STR "ubi" /* Normal UBI messages */ +#ifdef CONFIG_UBI_SILENCE_MSG +#define ubi_msg(fmt, ...) +#else #define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__) +#endif /* UBI warning messages */ #define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \ __func__, ##__VA_ARGS__) diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 88b867a..d1ba722 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1538,6 +1538,7 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) if (ubi->avail_pebs < WL_RESERVED_PEBS) { ubi_err("no enough physical eraseblocks (%d, need %d)", ubi->avail_pebs, WL_RESERVED_PEBS); + err = -ENOSPC; goto out_free; } ubi->avail_pebs -= WL_RESERVED_PEBS; |