summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/Makefile3
-rw-r--r--drivers/mtd/nand/am335x_spl_bch.c54
-rw-r--r--drivers/mtd/nand/davinci_nand.c3
-rw-r--r--drivers/mtd/spi/spi_spl_load.c46
4 files changed, 73 insertions, 33 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 02b149c..4eb354d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
obj-$(CONFIG_SPL_NAND_INIT) += nand.o
+ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
+endif
else # not spl
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index c84851b..bd89b06 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -16,7 +16,7 @@
#include <linux/mtd/nand_ecc.h>
static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
-static nand_info_t mtd;
+nand_info_t nand_info[1];
static struct nand_chip nand_chip;
#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
@@ -30,12 +30,12 @@ static struct nand_chip nand_chip;
static int nand_command(int block, int page, uint32_t offs,
u8 cmd)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = nand_info[0].priv;
int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
void (*hwctrl)(struct mtd_info *mtd, int cmd,
unsigned int ctrl) = this->cmd_ctrl;
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(&nand_info[0]))
;
/* Emulate NAND_CMD_READOOB */
@@ -45,11 +45,11 @@ static int nand_command(int block, int page, uint32_t offs,
}
/* Begin command latch cycle */
- hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(&nand_info[0], cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
if (cmd == NAND_CMD_RESET) {
- hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (!this->dev_ready(&mtd))
+ hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ while (!this->dev_ready(&nand_info[0]))
;
return 0;
}
@@ -60,35 +60,35 @@ static int nand_command(int block, int page, uint32_t offs,
/* Set ALE and clear CLE to start address cycle */
/* Column address */
- hwctrl(&mtd, offs & 0xff,
+ hwctrl(&nand_info[0], offs & 0xff,
NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
- hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+ hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
/* Row address */
- hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
- hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+ hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+ hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff),
NAND_CTRL_ALE); /* A[27:20] */
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
/* One more address cycle for devices > 128MiB */
- hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f,
NAND_CTRL_ALE); /* A[31:28] */
#endif
- hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
if (cmd == NAND_CMD_READ0) {
/* Latch in address */
- hwctrl(&mtd, NAND_CMD_READSTART,
+ hwctrl(&nand_info[0], NAND_CMD_READSTART,
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
- hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* Wait a while for the data to be ready
*/
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(&nand_info[0]))
;
} else if (cmd == NAND_CMD_RNDOUT) {
- hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
+ hwctrl(&nand_info[0], NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
NAND_CTRL_CHANGE);
- hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
}
return 0;
@@ -96,7 +96,7 @@ static int nand_command(int block, int page, uint32_t offs,
static int nand_is_bad_block(int block)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = nand_info[0].priv;
nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
NAND_CMD_READOOB);
@@ -117,7 +117,7 @@ static int nand_is_bad_block(int block)
static int nand_read_page(int block, int page, void *dst)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = nand_info[0].priv;
u_char ecc_calc[ECCTOTAL];
u_char ecc_code[ECCTOTAL];
u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
@@ -133,15 +133,15 @@ static int nand_read_page(int block, int page, void *dst)
nand_command(block, page, 0, NAND_CMD_READ0);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- this->ecc.hwctl(&mtd, NAND_ECC_READ);
+ this->ecc.hwctl(&nand_info[0], NAND_ECC_READ);
nand_command(block, page, data_pos, NAND_CMD_RNDOUT);
- this->read_buf(&mtd, p, eccsize);
+ this->read_buf(&nand_info[0], p, eccsize);
nand_command(block, page, oob_pos, NAND_CMD_RNDOUT);
- this->read_buf(&mtd, oob, eccbytes);
- this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+ this->read_buf(&nand_info[0], oob, eccbytes);
+ this->ecc.calculate(&nand_info[0], p, &ecc_calc[i]);
data_pos += eccsize;
oob_pos += eccbytes;
@@ -160,7 +160,7 @@ static int nand_read_page(int block, int page, void *dst)
* from correct_data(). We just hope that all possible errors
* are corrected by this routine.
*/
- this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+ this->ecc.correct(&nand_info[0], p, &ecc_code[i], &ecc_calc[i]);
}
return 0;
@@ -206,13 +206,13 @@ void nand_init(void)
/*
* Init board specific nand support
*/
- mtd.priv = &nand_chip;
+ nand_info[0].priv = &nand_chip;
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
if (nand_chip.select_chip)
- nand_chip.select_chip(&mtd, 0);
+ nand_chip.select_chip(&nand_info[0], 0);
/* NAND chip may require reset after power-on */
nand_command(0, 0, 0, NAND_CMD_RESET);
@@ -222,5 +222,5 @@ void nand_init(void)
void nand_deselect(void)
{
if (nand_chip.select_chip)
- nand_chip.select_chip(&mtd, -1);
+ nand_chip.select_chip(&nand_info[0], -1);
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 5b17d7b..75b03a7 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -609,6 +609,9 @@ void davinci_nand_init(struct nand_chip *nand)
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif
+#ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
+#endif
#ifdef CONFIG_SYS_NAND_HW_ECC
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = 512;
diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c
index 2935530..1954b7e 100644
--- a/drivers/mtd/spi/spi_spl_load.c
+++ b/drivers/mtd/spi/spi_spl_load.c
@@ -13,6 +13,35 @@
#include <spi_flash.h>
#include <spl.h>
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Load the kernel, check for a valid header we can parse, and if found load
+ * the kernel and then device tree.
+ */
+static int spi_load_image_os(struct spi_flash *flash,
+ struct image_header *header)
+{
+ /* Read for a header, parse or error out. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
+ (void *)header);
+
+ if (image_get_magic(header) != IH_MAGIC)
+ return -1;
+
+ spl_parse_image_header(header);
+
+ spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+
+ /* Read device tree. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
+ CONFIG_SYS_SPI_ARGS_SIZE,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+
+ return 0;
+}
+#endif
+
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
@@ -37,10 +66,15 @@ void spl_spi_load_image(void)
/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
- /* Load u-boot, mkimage header is 64 bytes. */
- spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
- (void *)header);
- spl_parse_image_header(header);
- spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
- spl_image.size, (void *)spl_image.load_addr);
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || spi_load_image_os(flash, header))
+#endif
+ {
+ /* Load u-boot, mkimage header is 64 bytes. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+ (void *)header);
+ spl_parse_image_header(header);
+ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+ }
}
generated by cgit v1.1 at 2024-08-28 06:14:07 +0000