summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/mxc_nand.c19
1 files changed, 9 insertions, 10 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 2a8dd7e..78e07cc 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -350,7 +350,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
}
/*
- * This function requests the NANDFC to initate the transfer
+ * This function requests the NANDFC to initiate the transfer
* of data currently in the NANDFC RAM buffer to the NAND device.
*/
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -394,7 +394,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
}
/*
- * Requests NANDFC to initated the transfer of data from the
+ * Requests NANDFC to initiate the transfer of data from the
* NAND device into in the NANDFC ram buffer.
*/
static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -637,7 +637,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
host->page_addr, buf, oob);
- /* first read out the data area and the available portion of OOB */
+ /* first read the data area and the available portion of OOB */
for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
int stat;
@@ -1179,7 +1179,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/*
* before sending SEQIN command for partial write,
* we need read one page out. FSL NFC does not support
- * partial write. It alway send out 512+ecc+512+ecc ...
+ * partial write. It always sends out 512+ecc+512+ecc
* for large page nand flash. But for small page nand
* flash, it does support SPARE ONLY operation.
*/
@@ -1209,7 +1209,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
send_prog_page(host, 0, host->spare_only);
if (host->pagesize_2k && !is_mxc_nfc_11()) {
- /* data in 4 areas datas */
+ /* data in 4 areas */
send_prog_page(host, 1, host->spare_only);
send_prog_page(host, 2, host->spare_only);
send_prog_page(host, 3, host->spare_only);
@@ -1225,10 +1225,9 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
if (column != -1) {
/*
* MXC NANDFC can only perform full page+spare or
- * spare-only read/write. When the upper layers
- * layers perform a read/write buf operation,
- * we will used the saved column adress to index into
- * the full page.
+ * spare-only read/write. When the upper layers perform
+ * a read/write buffer operation, we will use the saved
+ * column address to index into the full page.
*/
send_addr(host, 0);
if (host->pagesize_2k)
@@ -1377,7 +1376,7 @@ int board_nand_init(struct nand_chip *this)
/* Unlock Block Command for given address range */
writew(0x4, &host->regs->nfc_wrprot);
- /* NAND bus width determines access funtions used by upper layer */
+ /* NAND bus width determines access functions used by upper layer */
if (is_16bit_nand())
this->options |= NAND_BUSWIDTH_16;