diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/omap_gpmc.c | 33 |
1 files changed, 16 insertions, 17 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 89e8b1c..99b9cef 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -30,7 +30,6 @@ #include <nand.h> static uint8_t cs; -static struct gpmc *gpmc_base = (struct gpmc *)GPMC_BASE; static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT; /* @@ -48,13 +47,13 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, */ switch (ctrl) { case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd; + this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; break; case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_adr; + this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_adr; break; case NAND_CTRL_CHANGE | NAND_NCE: - this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_dat; + this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; break; } @@ -74,8 +73,8 @@ static void omap_hwecc_init(struct nand_chip *chip) * Init ECC Control Register * Clear all ECC | Enable Reg1 */ - writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control); - writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_base->ecc_size_config); + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); + writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_cfg->ecc_size_config); } /* @@ -178,7 +177,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, u_int32_t val; /* Start Reading from HW ECC1_Result = 0x200 */ - val = readl(&gpmc_base->ecc1_result); + val = readl(&gpmc_cfg->ecc1_result); ecc_code[0] = val & 0xFF; ecc_code[1] = (val >> 16) & 0xFF; @@ -188,7 +187,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, * Stop reading anymore ECC vals and clear old results * enable will be called if more reads are required */ - writel(0x000, &gpmc_base->ecc_config); + writel(0x000, &gpmc_cfg->ecc_config); return 0; } @@ -207,7 +206,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) case NAND_ECC_READ: case NAND_ECC_WRITE: /* Clear the ecc result registers, select ecc reg as 1 */ - writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control); + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); /* * Size 0 = 0xFF, Size1 is 0xFF - both are 512 bytes @@ -215,9 +214,9 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) * we just have a single ECC engine for all CS */ writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, - &gpmc_base->ecc_size_config); + &gpmc_cfg->ecc_size_config); val = (dev_width << 7) | (cs << 1) | (0x1); - writel(val, &gpmc_base->ecc_config); + writel(val, &gpmc_cfg->ecc_config); break; default: printf("Error: Unrecognized Mode[%d]!\n", mode); @@ -311,7 +310,7 @@ int board_nand_init(struct nand_chip *nand) */ while (cs < GPMC_MAX_CS) { /* Check if NAND type is set */ - if ((readl(&gpmc_base->cs[cs].config1) & 0xC00) == 0x800) { + if ((readl(&gpmc_cfg->cs[cs].config1) & 0xC00) == 0x800) { /* Found it!! */ break; } @@ -323,18 +322,18 @@ int board_nand_init(struct nand_chip *nand) return -ENODEV; } - gpmc_config = readl(&gpmc_base->config); + gpmc_config = readl(&gpmc_cfg->config); /* Disable Write protect */ gpmc_config |= 0x10; - writel(gpmc_config, &gpmc_base->config); + writel(gpmc_config, &gpmc_cfg->config); - nand->IO_ADDR_R = (void __iomem *)&gpmc_base->cs[cs].nand_dat; - nand->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd; + nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; + nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; nand->cmd_ctrl = omap_nand_hwcontrol; nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR; /* If we are 16 bit dev, our gpmc config tells us that */ - if ((readl(&gpmc_base->cs[cs].config1) & 0x3000) == 0x1000) + if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000) nand->options |= NAND_BUSWIDTH_16; nand->chip_delay = 100; |