diff options
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/nand_util.c | 79 |
1 files changed, 43 insertions, 36 deletions
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index d86c987..77da53e 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -238,7 +238,8 @@ static struct nand_ecclayout autoplace_ecclayout = { #endif /* XXX U-BOOT XXX */ -#if 0 +#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK + /****************************************************************************** * Support for locking / unlocking operations of some NAND devices *****************************************************************************/ @@ -253,7 +254,7 @@ static struct nand_ecclayout autoplace_ecclayout = { * nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT * state * - * @param meminfo nand mtd instance + * @param mtd nand mtd instance * @param tight bring device in lock tight mode * * @return 0 on success, -1 in case of error @@ -270,21 +271,21 @@ static struct nand_ecclayout autoplace_ecclayout = { * calls will fail. It is only posible to leave lock-tight state by * an hardware signal (low pulse on _WP pin) or by power down. */ -int nand_lock(nand_info_t *meminfo, int tight) +int nand_lock(struct mtd_info *mtd, int tight) { int ret = 0; int status; - struct nand_chip *this = meminfo->priv; + struct nand_chip *chip = mtd->priv; /* select the NAND device */ - this->select_chip(meminfo, 0); + chip->select_chip(mtd, 0); - this->cmdfunc(meminfo, + chip->cmdfunc(mtd, (tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK), -1, -1); /* call wait ready function */ - status = this->waitfunc(meminfo, this, FL_WRITING); + status = chip->waitfunc(mtd, chip); /* see if device thinks it succeeded */ if (status & 0x01) { @@ -292,7 +293,7 @@ int nand_lock(nand_info_t *meminfo, int tight) } /* de-select the NAND device */ - this->select_chip(meminfo, -1); + chip->select_chip(mtd, -1); return ret; } @@ -300,7 +301,7 @@ int nand_lock(nand_info_t *meminfo, int tight) * nand_get_lock_status: - query current lock state from one page of NAND * flash * - * @param meminfo nand mtd instance + * @param mtd nand mtd instance * @param offset page address to query (muss be page aligned!) * * @return -1 in case of error @@ -311,19 +312,19 @@ int nand_lock(nand_info_t *meminfo, int tight) * NAND_LOCK_STATUS_UNLOCK: page unlocked * */ -int nand_get_lock_status(nand_info_t *meminfo, ulong offset) +int nand_get_lock_status(struct mtd_info *mtd, ulong offset) { int ret = 0; int chipnr; int page; - struct nand_chip *this = meminfo->priv; + struct nand_chip *chip = mtd->priv; /* select the NAND device */ - chipnr = (int)(offset >> this->chip_shift); - this->select_chip(meminfo, chipnr); + chipnr = (int)(offset >> chip->chip_shift); + chip->select_chip(mtd, chipnr); - if ((offset & (meminfo->writesize - 1)) != 0) { + if ((offset & (mtd->writesize - 1)) != 0) { printf ("nand_get_lock_status: " "Start address must be beginning of " "nand page!\n"); @@ -332,16 +333,16 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset) } /* check the Lock Status */ - page = (int)(offset >> this->page_shift); - this->cmdfunc(meminfo, NAND_CMD_LOCK_STATUS, -1, page & this->pagemask); + page = (int)(offset >> chip->page_shift); + chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask); - ret = this->read_byte(meminfo) & (NAND_LOCK_STATUS_TIGHT + ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT | NAND_LOCK_STATUS_LOCK | NAND_LOCK_STATUS_UNLOCK); out: /* de-select the NAND device */ - this->select_chip(meminfo, -1); + chip->select_chip(mtd, -1); return ret; } @@ -349,59 +350,65 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset) * nand_unlock: - Unlock area of NAND pages * only one consecutive area can be unlocked at one time! * - * @param meminfo nand mtd instance + * @param mtd nand mtd instance * @param start start byte address * @param length number of bytes to unlock (must be a multiple of * page size nand->writesize) * * @return 0 on success, -1 in case of error */ -int nand_unlock(nand_info_t *meminfo, ulong start, ulong length) +int nand_unlock(struct mtd_info *mtd, ulong start, ulong length) { int ret = 0; int chipnr; int status; int page; - struct nand_chip *this = meminfo->priv; + struct nand_chip *chip = mtd->priv; printf ("nand_unlock: start: %08x, length: %d!\n", (int)start, (int)length); /* select the NAND device */ - chipnr = (int)(start >> this->chip_shift); - this->select_chip(meminfo, chipnr); + chipnr = (int)(start >> chip->chip_shift); + chip->select_chip(mtd, chipnr); /* check the WP bit */ - this->cmdfunc(meminfo, NAND_CMD_STATUS, -1, -1); - if ((this->read_byte(meminfo) & 0x80) == 0) { + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) { printf ("nand_unlock: Device is write protected!\n"); ret = -1; goto out; } - if ((start & (meminfo->writesize - 1)) != 0) { + if ((start & (mtd->erasesize - 1)) != 0) { printf ("nand_unlock: Start address must be beginning of " - "nand page!\n"); + "nand block!\n"); ret = -1; goto out; } - if (length == 0 || (length & (meminfo->writesize - 1)) != 0) { - printf ("nand_unlock: Length must be a multiple of nand page " - "size!\n"); + if (length == 0 || (length & (mtd->erasesize - 1)) != 0) { + printf ("nand_unlock: Length must be a multiple of nand block " + "size %08x!\n", mtd->erasesize); ret = -1; goto out; } + /* + * Set length so that the last address is set to the + * starting address of the last block + */ + length -= mtd->erasesize; + /* submit address of first page to unlock */ - page = (int)(start >> this->page_shift); - this->cmdfunc(meminfo, NAND_CMD_UNLOCK1, -1, page & this->pagemask); + page = (int)(start >> chip->page_shift); + chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask); /* submit ADDRESS of LAST page to unlock */ - page += (int)(length >> this->page_shift) - 1; - this->cmdfunc(meminfo, NAND_CMD_UNLOCK2, -1, page & this->pagemask); + page += (int)(length >> chip->page_shift); + chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask); /* call wait ready function */ - status = this->waitfunc(meminfo, this, FL_WRITING); + status = chip->waitfunc(mtd, chip); /* see if device thinks it succeeded */ if (status & 0x01) { /* there was an error */ @@ -411,7 +418,7 @@ int nand_unlock(nand_info_t *meminfo, ulong start, ulong length) out: /* de-select the NAND device */ - this->select_chip(meminfo, -1); + chip->select_chip(mtd, -1); return ret; } #endif |