diff options
Diffstat (limited to 'drivers/mtd/nand/nand_bbt.c')
-rw-r--r-- | drivers/mtd/nand/nand_bbt.c | 427 |
1 files changed, 328 insertions, 99 deletions
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index ded652b..2b730e0 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -13,27 +13,36 @@ * Description: * * When nand_scan_bbt is called, then it tries to find the bad block table - * depending on the options in the bbt descriptor(s). If a bbt is found - * then the contents are read and the memory based bbt is created. If a - * mirrored bbt is selected then the mirror is searched too and the - * versions are compared. If the mirror has a greater version number - * than the mirror bbt is used to build the memory based bbt. + * depending on the options in the BBT descriptor(s). If no flash based BBT + * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory + * marked good / bad blocks. This information is used to create a memory BBT. + * Once a new bad block is discovered then the "factory" information is updated + * on the device. + * If a flash based BBT is specified then the function first tries to find the + * BBT on flash. If a BBT is found then the contents are read and the memory + * based BBT is created. If a mirrored BBT is selected then the mirror is + * searched too and the versions are compared. If the mirror has a greater + * version number than the mirror BBT is used to build the memory based BBT. * If the tables are not versioned, then we "or" the bad block information. - * If one of the bbt's is out of date or does not exist it is (re)created. - * If no bbt exists at all then the device is scanned for factory marked + * If one of the BBTs is out of date or does not exist it is (re)created. + * If no BBT exists at all then the device is scanned for factory marked * good / bad blocks and the bad block tables are created. * - * For manufacturer created bbts like the one found on M-SYS DOC devices - * the bbt is searched and read but never created + * For manufacturer created BBTs like the one found on M-SYS DOC devices + * the BBT is searched and read but never created * - * The autogenerated bad block table is located in the last good blocks + * The auto generated bad block table is located in the last good blocks * of the device. The table is mirrored, so it can be updated eventually. - * The table is marked in the oob area with an ident pattern and a version - * number which indicates which of both tables is more up to date. + * The table is marked in the OOB area with an ident pattern and a version + * number which indicates which of both tables is more up to date. If the NAND + * controller needs the complete OOB area for the ECC information then the + * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern + * and the version byte into the data area and the OOB area will remain + * untouched. * * The table uses 2 bits per block - * 11b: block is good - * 00b: block is factory marked bad + * 11b: block is good + * 00b: block is factory marked bad * 01b, 10b: block is marked bad due to wear * * The memory bad block table uses the following scheme: @@ -55,9 +64,21 @@ #include <linux/mtd/compat.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/bitops.h> #include <asm/errno.h> +static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td) +{ + int ret; + + ret = memcmp(buf, td->pattern, td->len); + if (!ret) + return ret; + return -1; +} + /** * check_pattern - [GENERIC] check if a pattern is in the buffer * @buf: the buffer to search @@ -76,6 +97,9 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc int i, end = 0; uint8_t *p = buf; + if (td->options & NAND_BBT_NO_OOB) + return check_pattern_no_oob(buf, td); + end = paglen + td->offs; if (td->options & NAND_BBT_SCANEMPTY) { for (i = 0; i < end; i++) { @@ -91,6 +115,28 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc return -1; } + /* Check both positions 1 and 6 for pattern? */ + if (td->options & NAND_BBT_SCANBYTE1AND6) { + if (td->options & NAND_BBT_SCANEMPTY) { + p += td->len; + end += NAND_SMALL_BADBLOCK_POS - td->offs; + /* Check region between positions 1 and 6 */ + for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len; + i++) { + if (*p++ != 0xff) + return -1; + } + } + else { + p += NAND_SMALL_BADBLOCK_POS - td->offs; + } + /* Compare the pattern */ + for (i = 0; i < td->len; i++) { + if (p[i] != td->pattern[i]) + return -1; + } + } + if (td->options & NAND_BBT_SCANEMPTY) { p += td->len; end += td->len; @@ -122,36 +168,74 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td) if (p[td->offs + i] != td->pattern[i]) return -1; } + /* Need to check location 1 AND 6? */ + if (td->options & NAND_BBT_SCANBYTE1AND6) { + for (i = 0; i < td->len; i++) { + if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i]) + return -1; + } + } return 0; } /** + * add_marker_len - compute the length of the marker in data area + * @td: BBT descriptor used for computation + * + * The length will be 0 if the markeris located in OOB area. + */ +static u32 add_marker_len(struct nand_bbt_descr *td) +{ + u32 len; + + if (!(td->options & NAND_BBT_NO_OOB)) + return 0; + + len = td->len; + if (td->options & NAND_BBT_VERSION) + len++; + return len; +} + +/** * read_bbt - [GENERIC] Read the bad block table starting from page * @mtd: MTD device structure * @buf: temporary buffer * @page: the starting page * @num: the number of bbt descriptors to read - * @bits: number of bits per block + * @td: the bbt describtion table * @offs: offset in the memory table - * @reserved_block_code: Pattern to identify reserved blocks * * Read the bad block table starting from page. * */ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, - int bits, int offs, int reserved_block_code) + struct nand_bbt_descr *td, int offs) { int res, i, j, act = 0; struct nand_chip *this = mtd->priv; size_t retlen, len, totlen; loff_t from; + int bits = td->options & NAND_BBT_NRBITS_MSK; uint8_t msk = (uint8_t) ((1 << bits) - 1); + u32 marker_len; + int reserved_block_code = td->reserved_block_code; totlen = (num * bits) >> 3; + marker_len = add_marker_len(td); from = ((loff_t) page) << this->page_shift; while (totlen) { len = min(totlen, (size_t) (1 << this->bbt_erase_shift)); + if (marker_len) { + /* + * In case the BBT marker is not in the OOB area it + * will be just in the first page. + */ + len -= marker_len; + from += marker_len; + marker_len = 0; + } res = mtd->read(mtd, from, len, &retlen, buf); if (res < 0) { if (retlen != len) { @@ -170,9 +254,7 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, continue; if (reserved_block_code && (tmp == reserved_block_code)) { printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n", - (loff_t)((offs << 2) + - (act >> 1)) << - this->bbt_erase_shift); + (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift); this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); mtd->ecc_stats.bbtblocks++; continue; @@ -180,8 +262,7 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, /* Leave it for now, if its matured we can move this * message to MTD_DEBUG_LEVEL0 */ printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n", - (loff_t)((offs << 2) + (act >> 1)) << - this->bbt_erase_shift); + (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift); /* Factory marked bad or worn out ? */ if (tmp == 0) this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); @@ -211,20 +292,21 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc { struct nand_chip *this = mtd->priv; int res = 0, i; - int bits; - bits = td->options & NAND_BBT_NRBITS_MSK; if (td->options & NAND_BBT_PERCHIP) { int offs = 0; for (i = 0; i < this->numchips; i++) { if (chip == -1 || chip == i) - res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code); + res = read_bbt(mtd, buf, td->pages[i], + this->chipsize >> this->bbt_erase_shift, + td, offs); if (res) return res; offs += this->chipsize >> (this->bbt_erase_shift + 2); } } else { - res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code); + res = read_bbt(mtd, buf, td->pages[0], + mtd->size >> this->bbt_erase_shift, td, 0); if (res) return res; } @@ -232,21 +314,64 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc } /* + * BBT marker is in the first page, no OOB. + */ +static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs, + struct nand_bbt_descr *td) +{ + size_t retlen; + size_t len; + + len = td->len; + if (td->options & NAND_BBT_VERSION) + len++; + + return mtd->read(mtd, offs, len, &retlen, buf); +} + +/* * Scan read raw data from flash */ -static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs, +static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs, size_t len) { struct mtd_oob_ops ops; + int res; ops.mode = MTD_OOB_RAW; ops.ooboffs = 0; ops.ooblen = mtd->oobsize; - ops.oobbuf = buf; - ops.datbuf = buf; - ops.len = len; - return mtd->read_oob(mtd, offs, &ops); + + while (len > 0) { + if (len <= mtd->writesize) { + ops.oobbuf = buf + len; + ops.datbuf = buf; + ops.len = len; + return mtd->read_oob(mtd, offs, &ops); + } else { + ops.oobbuf = buf + mtd->writesize; + ops.datbuf = buf; + ops.len = mtd->writesize; + res = mtd->read_oob(mtd, offs, &ops); + + if (res) + return res; + } + + buf += mtd->oobsize + mtd->writesize; + len -= mtd->writesize; + } + return 0; +} + +static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs, + size_t len, struct nand_bbt_descr *td) +{ + if (td->options & NAND_BBT_NO_OOB) + return scan_read_raw_data(mtd, buf, offs, td); + else + return scan_read_raw_oob(mtd, buf, offs, len); } /* @@ -267,6 +392,15 @@ static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len, return mtd->write_oob(mtd, offs, &ops); } +static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td) +{ + u32 ver_offs = td->veroffs; + + if (!(td->options & NAND_BBT_NO_OOB)) + ver_offs += mtd->writesize; + return ver_offs; +} + /** * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page * @mtd: MTD device structure @@ -285,18 +419,18 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, /* Read the primary version, if available */ if (td->options & NAND_BBT_VERSION) { - scan_read_raw(mtd, buf, (loff_t)td->pages[0] << - this->page_shift, mtd->writesize); - td->version[0] = buf[mtd->writesize + td->veroffs]; + scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift, + mtd->writesize, td); + td->version[0] = buf[bbt_get_ver_offs(mtd, td)]; printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); } /* Read the mirror version, if available */ if (md && (md->options & NAND_BBT_VERSION)) { - scan_read_raw(mtd, buf, (loff_t)md->pages[0] << - this->page_shift, mtd->writesize); - md->version[0] = buf[mtd->writesize + md->veroffs]; + scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift, + mtd->writesize, td); + md->version[0] = buf[bbt_get_ver_offs(mtd, md)]; printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); } @@ -312,7 +446,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, { int ret, j; - ret = scan_read_raw(mtd, buf, offs, readlen); + ret = scan_read_raw_oob(mtd, buf, offs, readlen); if (ret) return ret; @@ -376,16 +510,14 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, loff_t from; size_t readlen; - MTDDEBUG (MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n"); + MTDDEBUG(MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n"); if (bd->options & NAND_BBT_SCANALLPAGES) len = 1 << (this->bbt_erase_shift - this->page_shift); - else { - if (bd->options & NAND_BBT_SCAN2NDPAGE) - len = 2; - else - len = 1; - } + else if (bd->options & NAND_BBT_SCAN2NDPAGE) + len = 2; + else + len = 1; if (!(bd->options & NAND_BBT_SCANEMPTY)) { /* We need only read few bytes from the OOB area */ @@ -415,9 +547,14 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, from = (loff_t)startblock << (this->bbt_erase_shift - 1); } + if (this->options & NAND_BBT_SCANLASTPAGE) + from += mtd->erasesize - (mtd->writesize * len); + for (i = startblock; i < numblocks;) { int ret; + BUG_ON(bd->options & NAND_BBT_NO_OOB); + if (bd->options & NAND_BBT_SCANALLPAGES) ret = scan_block_full(mtd, bd, from, buf, readlen, scanlen, len); @@ -429,7 +566,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (ret) { this->bbt[i >> 3] |= 0x03 << (i & 0x6); - MTDDEBUG (MTD_DEBUG_LEVEL0, + MTDDEBUG(MTD_DEBUG_LEVEL0, "Bad eraseblock %d at 0x%012llx\n", i >> 1, (unsigned long long)from); mtd->ecc_stats.badblocks++; @@ -497,11 +634,12 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr loff_t offs = (loff_t)actblock << this->bbt_erase_shift; /* Read first page */ - scan_read_raw(mtd, buf, offs, mtd->writesize); + scan_read_raw(mtd, buf, offs, mtd->writesize, td); if (!check_pattern(buf, scanlen, mtd->writesize, td)) { td->pages[i] = actblock << blocktopage; if (td->options & NAND_BBT_VERSION) { - td->version[i] = buf[mtd->writesize + td->veroffs]; + offs = bbt_get_ver_offs(mtd, td); + td->version[i] = buf[offs]; } break; } @@ -685,12 +823,26 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, memset(&buf[offs], 0xff, (size_t) (numblocks >> sft)); ooboffs = len + (pageoffs * mtd->oobsize); + } else if (td->options & NAND_BBT_NO_OOB) { + ooboffs = 0; + offs = td->len; + /* the version byte */ + if (td->options & NAND_BBT_VERSION) + offs++; + /* Calc length */ + len = (size_t) (numblocks >> sft); + len += offs; + /* Make it page aligned ! */ + len = ALIGN(len, mtd->writesize); + /* Preset the buffer with 0xff */ + memset(buf, 0xff, len); + /* Pattern is located at the begin of first page */ + memcpy(buf, td->pattern, td->len); } else { /* Calc length */ len = (size_t) (numblocks >> sft); /* Make it page aligned ! */ - len = (len + (mtd->writesize - 1)) & - ~(mtd->writesize - 1); + len = ALIGN(len, mtd->writesize); /* Preset the buffer with 0xff */ memset(buf, 0xff, len + (len >> this->page_shift)* mtd->oobsize); @@ -724,13 +876,14 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, if (res < 0) goto outerr; - res = scan_write_bbt(mtd, to, len, buf, &buf[len]); + res = scan_write_bbt(mtd, to, len, buf, + td->options & NAND_BBT_NO_OOB ? NULL : + &buf[len]); if (res < 0) goto outerr; - printk(KERN_DEBUG "Bad block table written to 0x%012llx, " - "version 0x%02X\n", (unsigned long long)to, - td->version[chip]); + printk(KERN_DEBUG "Bad block table written to 0x%012llx, version " + "0x%02X\n", (unsigned long long)to, td->version[chip]); /* Mark it as used */ td->pages[chip] = page; @@ -791,7 +944,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc rd2 = NULL; /* Per chip or per device ? */ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; - /* Mirrored table avilable ? */ + /* Mirrored table available ? */ if (md) { if (td->pages[i] == -1 && md->pages[i] == -1) { writeops = 0x03; @@ -845,7 +998,8 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc continue; /* Create the table in memory by scanning the chip(s) */ - create_bbt(mtd, buf, bd, chipsel); + if (!(this->options & NAND_CREATE_EMPTY_BBT)) + create_bbt(mtd, buf, bd, chipsel); td->version[i] = 1; if (md) @@ -910,8 +1064,7 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) newval = oldval | (0x2 << (block & 0x06)); this->bbt[(block >> 3)] = newval; if ((oldval != newval) && td->reserved_block_code) - nand_update_bbt(mtd, (loff_t)block << - (this->bbt_erase_shift - 1)); + nand_update_bbt(mtd, (loff_t)block << (this->bbt_erase_shift - 1)); continue; } update = 0; @@ -932,12 +1085,59 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) new ones have been marked, then we need to update the stored bbts. This should only happen once. */ if (update && td->reserved_block_code) - nand_update_bbt(mtd, (loff_t)(block - 2) << - (this->bbt_erase_shift - 1)); + nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1)); } } /** + * verify_bbt_descr - verify the bad block description + * @mtd: MTD device structure + * @bd: the table to verify + * + * This functions performs a few sanity checks on the bad block description + * table. + */ +static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) +{ + struct nand_chip *this = mtd->priv; + u32 pattern_len; + u32 bits; + u32 table_size; + + if (!bd) + return; + + pattern_len = bd->len; + bits = bd->options & NAND_BBT_NRBITS_MSK; + + BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) && + !(this->options & NAND_USE_FLASH_BBT)); + BUG_ON(!bits); + + if (bd->options & NAND_BBT_VERSION) + pattern_len++; + + if (bd->options & NAND_BBT_NO_OOB) { + BUG_ON(!(this->options & NAND_USE_FLASH_BBT)); + BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB)); + BUG_ON(bd->offs); + if (bd->options & NAND_BBT_VERSION) + BUG_ON(bd->veroffs != bd->len); + BUG_ON(bd->options & NAND_BBT_SAVECONTENT); + } + + if (bd->options & NAND_BBT_PERCHIP) + table_size = this->chipsize >> this->bbt_erase_shift; + else + table_size = mtd->size >> this->bbt_erase_shift; + table_size >>= 3; + table_size *= bits; + if (bd->options & NAND_BBT_NO_OOB) + table_size += pattern_len; + BUG_ON(table_size > (1 << this->bbt_erase_shift)); +} + +/** * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s) * @mtd: MTD device structure * @bd: descriptor for the good/bad block search pattern @@ -978,6 +1178,8 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) } return res; } + verify_bbt_descr(mtd, td); + verify_bbt_descr(mtd, md); /* Allocate a temporary buffer for one eraseblock incl. oob */ len = (1 << this->bbt_erase_shift); @@ -1073,34 +1275,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) * while scanning a device for factory marked good / bad blocks. */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static struct nand_bbt_descr smallpage_memorybased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = 5, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr largepage_memorybased = { - .options = 0, - .offs = 0, - .len = 2, - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr smallpage_flashbased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = 5, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr largepage_flashbased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = 0, - .len = 2, - .pattern = scan_ff_pattern -}; - static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; static struct nand_bbt_descr agand_flashbased = { @@ -1135,6 +1309,59 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern }; +static struct nand_bbt_descr bbt_main_no_bbt_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP + | NAND_BBT_NO_OOB, + .len = 4, + .veroffs = 4, + .maxblocks = 4, + .pattern = bbt_pattern +}; + +static struct nand_bbt_descr bbt_mirror_no_bbt_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP + | NAND_BBT_NO_OOB, + .len = 4, + .veroffs = 4, + .maxblocks = 4, + .pattern = mirror_pattern +}; + +#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \ + NAND_BBT_SCANBYTE1AND6) +/** + * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure + * @this: NAND chip to create descriptor for + * + * This function allocates and initializes a nand_bbt_descr for BBM detection + * based on the properties of "this". The new descriptor is stored in + * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when + * passed to this function. + * + */ +static int nand_create_default_bbt_descr(struct nand_chip *this) +{ + struct nand_bbt_descr *bd; + if (this->badblock_pattern) { + printk(KERN_WARNING "BBT descr already allocated; not replacing.\n"); + return -EINVAL; + } + bd = kzalloc(sizeof(*bd), GFP_KERNEL); + if (!bd) { + printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n"); + return -ENOMEM; + } + bd->options = this->options & BBT_SCAN_OPTIONS; + bd->offs = this->badblockpos; + bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1; + bd->pattern = scan_ff_pattern; + bd->options |= NAND_BBT_DYNAMICSTRUCT; + this->badblock_pattern = bd; + return 0; +} + /** * nand_default_bbt - [NAND Interface] Select a default bad block table for the device * @mtd: MTD device structure @@ -1168,20 +1395,22 @@ int nand_default_bbt(struct mtd_info *mtd) if (this->options & NAND_USE_FLASH_BBT) { /* Use the default pattern descriptors */ if (!this->bbt_td) { - this->bbt_td = &bbt_main_descr; - this->bbt_md = &bbt_mirror_descr; - } - if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased; + if (this->options & NAND_USE_FLASH_BBT_NO_OOB) { + this->bbt_td = &bbt_main_no_bbt_descr; + this->bbt_md = &bbt_mirror_no_bbt_descr; + } else { + this->bbt_td = &bbt_main_descr; + this->bbt_md = &bbt_mirror_descr; + } } } else { this->bbt_td = NULL; this->bbt_md = NULL; - if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->writesize > 512) ? - &largepage_memorybased : &smallpage_memorybased; - } } + + if (!this->badblock_pattern) + nand_create_default_bbt_descr(this); + return nand_scan_bbt(mtd, this->badblock_pattern); } @@ -1202,8 +1431,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) block = (int)(offs >> (this->bbt_erase_shift - 1)); res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; - MTDDEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: " - "(block %d) 0x%02x\n", (unsigned int)offs, res, block >> 1); + MTDDEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, block >> 1, res); switch ((int)res) { case 0x00: |