1 files changed, 31 insertions, 25 deletions

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 834a8a6..0fa776a 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -640,9 +640,8 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	return fsl_elbc_read_byte(mtd);
 }
 
-static int fsl_elbc_read_page(struct mtd_info *mtd,
-			      struct nand_chip *chip,
-			      uint8_t *buf, int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			      uint8_t *buf, int oob_required, int page)
 {
 	fsl_elbc_read_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -656,12 +655,13 @@ static int fsl_elbc_read_page(struct mtd_info *mtd,
 /* ECC will be calculated automatically, and errors will be detected in
  * waitfunc.
  */
-static void fsl_elbc_write_page(struct mtd_info *mtd,
-				struct nand_chip *chip,
-				const uint8_t *buf)
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
 }
 
 static struct fsl_elbc_ctrl *elbc_ctrl;
@@ -747,8 +747,8 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 	nand->bbt_md = &bbt_mirror_descr;
 
   	/* set up nand options */
-	nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-			NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
+	nand->options = NAND_NO_SUBPAGE_WRITE;
+	nand->bbt_options = NAND_BBT_USE_FLASH;
 
 	nand->controller = &elbc_ctrl->controller;
 	nand->priv = priv;
@@ -756,20 +756,8 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 	nand->ecc.read_page = fsl_elbc_read_page;
 	nand->ecc.write_page = fsl_elbc_write_page;
 
-#ifdef CONFIG_FSL_ELBC_FMR
-	priv->fmr = CONFIG_FSL_ELBC_FMR;
-#else
 	priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
 
-	/*
-	 * Hardware expects small page has ECCM0, large page has ECCM1
-	 * when booting from NAND.  Board config can override if not
-	 * booting from NAND.
-	 */
-	if (or & OR_FCM_PGS)
-		priv->fmr |= FMR_ECCM;
-#endif
-
 	/* If CS Base Register selects full hardware ECC then use it */
 	if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
 		nand->ecc.mode = NAND_ECC_HW;
@@ -781,16 +769,32 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 		nand->ecc.size = 512;
 		nand->ecc.bytes = 3;
 		nand->ecc.steps = 1;
+		nand->ecc.strength = 1;
 	} else {
 		/* otherwise fall back to default software ECC */
 		nand->ecc.mode = NAND_ECC_SOFT;
 	}
 
+	ret = nand_scan_ident(mtd, 1, NULL);
+	if (ret)
+		return ret;
+
 	/* Large-page-specific setup */
-	if (or & OR_FCM_PGS) {
+	if (mtd->writesize == 2048) {
+		setbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+			     OR_FCM_PGS);
+		in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+
 		priv->page_size = 1;
 		nand->badblock_pattern = &largepage_memorybased;
 
+		/*
+		 * Hardware expects small page has ECCM0, large page has
+		 * ECCM1 when booting from NAND, and we follow that even
+		 * when not booting from NAND.
+		 */
+		priv->fmr |= FMR_ECCM;
+
 		/* adjust ecc setup if needed */
 		if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
 			nand->ecc.steps = 4;
@@ -798,12 +802,14 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 					   &fsl_elbc_oob_lp_eccm1 :
 					   &fsl_elbc_oob_lp_eccm0;
 		}
+	} else if (mtd->writesize == 512) {
+		clrbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+			     OR_FCM_PGS);
+		in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+	} else {
+		return -ENODEV;
 	}
 
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret)
-		return ret;
-
 	ret = nand_scan_tail(mtd);
 	if (ret)
 		return ret;