diff options
Diffstat (limited to 'drivers/mtd/nand/atmel_nand.c')
-rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 48 |
1 files changed, 29 insertions, 19 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index da83f06..05ddfbb 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -12,9 +12,8 @@ */ #include <common.h> -#include <asm/arch/hardware.h> +#include <asm/gpio.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91_pio.h> #include <malloc.h> #include <nand.h> @@ -412,7 +411,7 @@ static int pmecc_err_location(struct mtd_info *mtd) } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n"); + dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n"); return -1; } @@ -452,7 +451,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, *(buf + byte_pos) ^= (1 << bit_pos); pos = sector_num * host->pmecc_sector_size + byte_pos; - printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, *(buf + byte_pos)); } else { /* Bit flip in OOB area */ @@ -462,7 +461,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, ecc[tmp] ^= (1 << bit_pos); pos = tmp + nand_chip->ecc.layout->eccpos[0]; - printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, ecc[tmp]); } @@ -500,7 +499,7 @@ normal_check: err_nbr = pmecc_err_location(mtd); if (err_nbr == -1) { - printk(KERN_ERR "PMECC: Too many errors\n"); + dev_err(host->dev, "PMECC: Too many errors\n"); mtd->ecc_stats.failed++; return -EIO; } else { @@ -544,7 +543,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n"); return -1; } @@ -584,7 +583,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); goto out; } @@ -827,6 +826,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, switch (mtd->writesize) { case 2048: case 4096: + case 8192: host->pmecc_degree = (sector_size == 512) ? PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14; host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; @@ -840,8 +840,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, nand->ecc.steps = 1; nand->ecc.bytes = host->pmecc_bytes_per_sector * host->pmecc_sector_number; + + if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) { + dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n", + MTD_MAX_ECCPOS_ENTRIES_LARGE); + return -EINVAL; + } + if (nand->ecc.bytes > mtd->oobsize - 2) { - printk(KERN_ERR "No room for ECC bytes\n"); + dev_err(host->dev, "No room for ECC bytes\n"); return -EINVAL; } pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, @@ -852,7 +859,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, case 512: case 1024: /* TODO */ - printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n"); + dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n"); default: /* page size not handled by HW ECC */ /* switching back to soft ECC */ @@ -1035,7 +1042,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* it doesn't seems to be a freshly * erased block. * We can't correct so many errors */ - printk(KERN_WARNING "atmel_nand : multiple errors detected." + dev_warn(host->dev, "atmel_nand : multiple errors detected." " Unable to correct.\n"); return -EIO; } @@ -1045,12 +1052,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* there's nothing much to do here. * the bit error is on the ECC itself. */ - printk(KERN_WARNING "atmel_nand : one bit error on ECC code." + dev_warn(host->dev, "atmel_nand : one bit error on ECC code." " Nothing to correct\n"); return 0; } - printk(KERN_WARNING "atmel_nand : one bit error on data." + dev_warn(host->dev, "atmel_nand : one bit error on data." " (word offset in the page :" " 0x%x bit offset : 0x%x)\n", ecc_word, ecc_bit); @@ -1062,7 +1069,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* 8 bits words */ dat[ecc_word] ^= (1 << ecc_bit); } - printk(KERN_WARNING "atmel_nand : error corrected\n"); + dev_warn(host->dev, "atmel_nand : error corrected\n"); return 1; } @@ -1146,8 +1153,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; #ifdef CONFIG_SYS_NAND_ENABLE_PIN - at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, - !(ctrl & NAND_NCE)); + gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE)); #endif this->IO_ADDR_W = (void *) IO_ADDR_W; } @@ -1159,7 +1165,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, #ifdef CONFIG_SYS_NAND_READY_PIN static int at91_nand_ready(struct mtd_info *mtd) { - return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN); + return gpio_get_value(CONFIG_SYS_NAND_READY_PIN); } #endif @@ -1178,7 +1184,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) mtd->priv = nand; nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; +#ifdef CONFIG_NAND_ECC_BCH + nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else nand->ecc.mode = NAND_ECC_SOFT; +#endif #ifdef CONFIG_SYS_NAND_DBW_16 nand->options = NAND_BUSWIDTH_16; #endif @@ -1186,7 +1196,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) #ifdef CONFIG_SYS_NAND_READY_PIN nand->dev_ready = at91_nand_ready; #endif - nand->chip_delay = 20; + nand->chip_delay = 75; ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); if (ret) @@ -1214,6 +1224,6 @@ void board_nand_init(void) int i; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) if (atmel_nand_chip_init(i, base_addr[i])) - printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip", + dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip", i); } |