diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mmc/s3c_sdi.c | 321 |
2 files changed, 322 insertions, 0 deletions
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index f5be96f..464cee1 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o obj-$(CONFIG_SDHCI) += sdhci.o obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o +obj-$(CONFIG_S3C_SDI) += s3c_sdi.o obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o diff --git a/drivers/mmc/s3c_sdi.c b/drivers/mmc/s3c_sdi.c new file mode 100644 index 0000000..1b5b705 --- /dev/null +++ b/drivers/mmc/s3c_sdi.c @@ -0,0 +1,321 @@ +/* + * S3C24xx SD/MMC driver + * + * Based on OpenMoko S3C24xx driver by Harald Welte <laforge@openmoko.org> + * + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <errno.h> +#include <asm/arch/s3c24x0_cpu.h> +#include <asm/io.h> +#include <asm/unaligned.h> + +#define S3C2440_SDICON_SDRESET (1 << 8) +#define S3C2410_SDICON_FIFORESET (1 << 1) +#define S3C2410_SDICON_CLOCKTYPE (1 << 0) + +#define S3C2410_SDICMDCON_LONGRSP (1 << 10) +#define S3C2410_SDICMDCON_WAITRSP (1 << 9) +#define S3C2410_SDICMDCON_CMDSTART (1 << 8) +#define S3C2410_SDICMDCON_SENDERHOST (1 << 6) +#define S3C2410_SDICMDCON_INDEX 0x3f + +#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12) +#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10) +#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9) + +#define S3C2440_SDIDCON_DS_WORD (2 << 22) +#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20) +#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19) +#define S3C2410_SDIDCON_BLOCKMODE (1 << 17) +#define S3C2410_SDIDCON_WIDEBUS (1 << 16) +#define S3C2440_SDIDCON_DATSTART (1 << 14) +#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12) +#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12) +#define S3C2410_SDIDCON_BLKNUM 0x7ff + +#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8) +#define S3C2410_SDIDSTA_CRCFAIL (1 << 7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5) +#define S3C2410_SDIDSTA_XFERFINISH (1 << 4) + +#define S3C2410_SDIFSTA_TFHALF (1 << 11) +#define S3C2410_SDIFSTA_COUNTMASK 0x7f + +/* + * WARNING: We only support one SD IP block. + * NOTE: It's not likely there will ever exist an S3C24xx with two, + * at least not in this universe all right. + */ +static int wide_bus; + +static int +s3cmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +{ + struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi(); + uint32_t sdiccon, sdicsta, sdidcon, sdidsta, sdidat, sdifsta; + uint32_t sdicsta_wait_bit = S3C2410_SDICMDSTAT_CMDSENT; + unsigned int timeout = 100000; + int ret = 0, xfer_len, data_offset = 0; + const uint32_t sdidsta_err_mask = S3C2410_SDIDSTA_FIFOFAIL | + S3C2410_SDIDSTA_CRCFAIL | S3C2410_SDIDSTA_RXCRCFAIL | + S3C2410_SDIDSTA_DATATIMEOUT; + + + writel(0xffffffff, &sdi_regs->sdicsta); + writel(0xffffffff, &sdi_regs->sdidsta); + writel(0xffffffff, &sdi_regs->sdifsta); + + /* Set up data transfer (if applicable). */ + if (data) { + writel(data->blocksize, &sdi_regs->sdibsize); + + sdidcon = data->blocks & S3C2410_SDIDCON_BLKNUM; + sdidcon |= S3C2410_SDIDCON_BLOCKMODE; +#if defined(CONFIG_S3C2440) + sdidcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART; +#endif + if (wide_bus) + sdidcon |= S3C2410_SDIDCON_WIDEBUS; + + if (data->flags & MMC_DATA_READ) { + sdidcon |= S3C2410_SDIDCON_RXAFTERCMD; + sdidcon |= S3C2410_SDIDCON_XFER_RXSTART; + } else { + sdidcon |= S3C2410_SDIDCON_TXAFTERRESP; + sdidcon |= S3C2410_SDIDCON_XFER_TXSTART; + } + + writel(sdidcon, &sdi_regs->sdidcon); + } + + /* Write CMD arg. */ + writel(cmd->cmdarg, &sdi_regs->sdicarg); + + /* Write CMD index. */ + sdiccon = cmd->cmdidx & S3C2410_SDICMDCON_INDEX; + sdiccon |= S3C2410_SDICMDCON_SENDERHOST; + sdiccon |= S3C2410_SDICMDCON_CMDSTART; + + /* Command with short response. */ + if (cmd->resp_type & MMC_RSP_PRESENT) { + sdiccon |= S3C2410_SDICMDCON_WAITRSP; + sdicsta_wait_bit = S3C2410_SDICMDSTAT_RSPFIN; + } + + /* Command with long response. */ + if (cmd->resp_type & MMC_RSP_136) + sdiccon |= S3C2410_SDICMDCON_LONGRSP; + + /* Start the command. */ + writel(sdiccon, &sdi_regs->sdiccon); + + /* Wait for the command to complete or for response. */ + for (timeout = 100000; timeout; timeout--) { + sdicsta = readl(&sdi_regs->sdicsta); + if (sdicsta & sdicsta_wait_bit) + break; + + if (sdicsta & S3C2410_SDICMDSTAT_CMDTIMEOUT) + timeout = 1; + } + + /* Clean the status bits. */ + setbits_le32(&sdi_regs->sdicsta, 0xf << 9); + + if (!timeout) { + puts("S3C SDI: Command timed out!\n"); + ret = TIMEOUT; + goto error; + } + + /* Read out the response. */ + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = readl(&sdi_regs->sdirsp0); + cmd->response[1] = readl(&sdi_regs->sdirsp1); + cmd->response[2] = readl(&sdi_regs->sdirsp2); + cmd->response[3] = readl(&sdi_regs->sdirsp3); + } else { + cmd->response[0] = readl(&sdi_regs->sdirsp0); + } + + /* If there are no data, we're done. */ + if (!data) + return 0; + + xfer_len = data->blocksize * data->blocks; + + while (xfer_len > 0) { + sdidsta = readl(&sdi_regs->sdidsta); + sdifsta = readl(&sdi_regs->sdifsta); + + if (sdidsta & sdidsta_err_mask) { + printf("S3C SDI: Data error (sdta=0x%08x)\n", sdidsta); + ret = -EIO; + goto error; + } + + if (data->flags & MMC_DATA_READ) { + if ((sdifsta & S3C2410_SDIFSTA_COUNTMASK) < 4) + continue; + sdidat = readl(&sdi_regs->sdidat); + put_unaligned_le32(sdidat, data->dest + data_offset); + } else { /* Write */ + /* TX FIFO half full. */ + if (!(sdifsta & S3C2410_SDIFSTA_TFHALF)) + continue; + + /* TX FIFO is below 32b full, write. */ + sdidat = get_unaligned_le32(data->src + data_offset); + writel(sdidat, &sdi_regs->sdidat); + } + data_offset += 4; + xfer_len -= 4; + } + + /* Wait for the command to complete or for response. */ + for (timeout = 100000; timeout; timeout--) { + sdidsta = readl(&sdi_regs->sdidsta); + if (sdidsta & S3C2410_SDIDSTA_XFERFINISH) + break; + + if (sdidsta & S3C2410_SDIDSTA_DATATIMEOUT) + timeout = 1; + } + + /* Clear status bits. */ + writel(0x6f8, &sdi_regs->sdidsta); + + if (!timeout) { + puts("S3C SDI: Command timed out!\n"); + ret = TIMEOUT; + goto error; + } + + writel(0, &sdi_regs->sdidcon); + + return 0; +error: + return ret; +} + +static void s3cmmc_set_ios(struct mmc *mmc) +{ + struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi(); + uint32_t divider = 0; + + wide_bus = (mmc->bus_width == 4); + + if (!mmc->clock) + return; + + divider = DIV_ROUND_UP(get_PCLK(), mmc->clock); + if (divider) + divider--; + + writel(divider, &sdi_regs->sdipre); + mdelay(125); +} + +static int s3cmmc_init(struct mmc *mmc) +{ + struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); + struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi(); + + /* Start the clock. */ + setbits_le32(&clk_power->clkcon, 1 << 9); + +#if defined(CONFIG_S3C2440) + writel(S3C2440_SDICON_SDRESET, &sdi_regs->sdicon); + mdelay(10); + writel(0x7fffff, &sdi_regs->sdidtimer); +#else + writel(0xffff, &sdi_regs->sdidtimer); +#endif + writel(MMC_MAX_BLOCK_LEN, &sdi_regs->sdibsize); + writel(0x0, &sdi_regs->sdiimsk); + + writel(S3C2410_SDICON_FIFORESET | S3C2410_SDICON_CLOCKTYPE, + &sdi_regs->sdicon); + + mdelay(125); + + return 0; +} + +struct s3cmmc_priv { + struct mmc_config cfg; + int (*getcd)(struct mmc *); + int (*getwp)(struct mmc *); +}; + +static int s3cmmc_getcd(struct mmc *mmc) +{ + struct s3cmmc_priv *priv = mmc->priv; + if (priv->getcd) + return priv->getcd(mmc); + else + return 0; +} + +static int s3cmmc_getwp(struct mmc *mmc) +{ + struct s3cmmc_priv *priv = mmc->priv; + if (priv->getwp) + return priv->getwp(mmc); + else + return 0; +} + +static const struct mmc_ops s3cmmc_ops = { + .send_cmd = s3cmmc_send_cmd, + .set_ios = s3cmmc_set_ios, + .init = s3cmmc_init, + .getcd = s3cmmc_getcd, + .getwp = s3cmmc_getwp, +}; + +int s3cmmc_initialize(bd_t *bis, int (*getcd)(struct mmc *), + int (*getwp)(struct mmc *)) +{ + struct s3cmmc_priv *priv; + struct mmc *mmc; + struct mmc_config *cfg; + + priv = calloc(1, sizeof(*priv)); + if (!priv) + return -ENOMEM; + cfg = &priv->cfg; + + cfg->name = "S3C MMC"; + cfg->ops = &s3cmmc_ops; + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_HC | MMC_MODE_HS; + cfg->f_min = 400000; + cfg->f_max = get_PCLK() / 2; + cfg->b_max = 0x80; + +#if defined(CONFIG_S3C2410) + /* + * S3C2410 has some bug that prevents reliable + * operation at higher speed + */ + cfg->f_max /= 2; +#endif + + mmc = mmc_create(cfg, priv); + if (!mmc) { + free(priv); + return -ENOMEM; + } + + return 0; +} |