diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Makefile | 6 | ||||
| -rw-r--r-- | drivers/mmc/davinci_mmc.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/fsl_esdhc.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/ftsdc010_esdhc.c | 687 | ||||
| -rw-r--r-- | drivers/mmc/ftsdc010_mci.c | 377 | ||||
| -rw-r--r-- | drivers/mmc/mmc.c | 137 | ||||
| -rw-r--r-- | drivers/mmc/mv_sdhci.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/omap_hsmmc.c | 20 | ||||
| -rw-r--r-- | drivers/mmc/s5p_sdhci.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/spear_sdhci.c | 44 | ||||
| -rw-r--r-- | drivers/mmc/spl_mmc.c | 137 |
11 files changed, 545 insertions, 879 deletions
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 7cd4281..24648a2 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -25,14 +25,11 @@ include $(TOPDIR)/config.mk LIB := $(obj)libmmc.o -ifdef CONFIG_SPL_BUILD -COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o -endif COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o -COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o +COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o @@ -46,6 +43,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o +COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index e2379e3..5aa2184 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -285,8 +285,11 @@ dmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) */ if (bytes_left > fifo_bytes) dmmc_wait_fifo_status(regs, 0x4a); - else if (bytes_left == fifo_bytes) + else if (bytes_left == fifo_bytes) { dmmc_wait_fifo_status(regs, 0x40); + if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD) + udelay(600); + } for (i = 0; bytes_left && (i < fifo_words); i++) { cmddata = get_val(®s->mmcdrr); diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index e945c0a..861f4b9 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -178,7 +178,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) int timeout; struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; -#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO +#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO uint wml_value; wml_value = data->blocksize/4; @@ -601,8 +601,7 @@ int fsl_esdhc_mmc_init(bd_t *bis) { struct fsl_esdhc_cfg *cfg; - cfg = malloc(sizeof(struct fsl_esdhc_cfg)); - memset(cfg, 0, sizeof(struct fsl_esdhc_cfg)); + cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1); cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; cfg->sdhc_clk = gd->arch.sdhc_clk; return fsl_esdhc_initialize(bis, cfg); diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c deleted file mode 100644 index 42f0e0c..0000000 --- a/drivers/mmc/ftsdc010_esdhc.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <mmc.h> - -#include <asm/io.h> -#include <faraday/ftsdc010.h> - -/* - * supported mmc hosts - * setting the number CONFIG_FTSDC010_NUMBER in your configuration file. - */ -static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER]; -static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER]; - -static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index) -{ - return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index; -} - -#ifdef DEBUG -static void ftsdc010_dump_reg(struct mmc_host *host) -{ - debug("cmd: %08x\n", readl(&host->reg->cmd)); - debug("argu: %08x\n", readl(&host->reg->argu)); - debug("rsp0: %08x\n", readl(&host->reg->rsp0)); - debug("rsp1: %08x\n", readl(&host->reg->rsp1)); - debug("rsp2: %08x\n", readl(&host->reg->rsp2)); - debug("rsp3: %08x\n", readl(&host->reg->rsp3)); - debug("rsp_cmd: %08x\n", readl(&host->reg->rsp_cmd)); - debug("dcr: %08x\n", readl(&host->reg->dcr)); - debug("dtr: %08x\n", readl(&host->reg->dtr)); - debug("dlr: %08x\n", readl(&host->reg->dlr)); - debug("status: %08x\n", readl(&host->reg->status)); - debug("clr: %08x\n", readl(&host->reg->clr)); - debug("int_mask: %08x\n", readl(&host->reg->int_mask)); - debug("pcr: %08x\n", readl(&host->reg->pcr)); - debug("ccr: %08x\n", readl(&host->reg->ccr)); - debug("bwr: %08x\n", readl(&host->reg->bwr)); - debug("dwr: %08x\n", readl(&host->reg->dwr)); - debug("feature: %08x\n", readl(&host->reg->feature)); - debug("rev: %08x\n", readl(&host->reg->rev)); -} -#endif - -static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask) -{ - unsigned int newmask; - - newmask = readl(®->int_mask); - newmask |= imask; - - writel(newmask, ®->int_mask); - - return newmask; -} - -static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size) -{ - unsigned int fifo; - unsigned int fifo_words; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get_data_buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - debug("%s: size: %08x\n", __func__, size); - - if (status & FTSDC010_STATUS_FIFO_ORUN) { - - debug("%s: FIFO OVERRUN: sta: %08x\n", - __func__, status); - - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo_words = fifo >> 2; - - while (fifo_words--) - *ptr++ = readl(&host->reg->dwr); - - /* - * for adding some delays for SD card to put - * data into FIFO again - */ - udelay(4*FTSDC010_DELAY_UNIT); - -#ifdef CONFIG_FTSDC010_SDIO - /* sdio allow non-power-of-2 blksz */ - if (fifo & 3) { - unsigned int n = fifo & 3; - unsigned int data = readl(&host->reg->dwr); - - unsigned char *p = (unsigned char *)ptr; - - while (n--) { - *p++ = data; - data >>= 8; - } - } -#endif - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static void ftsdc010_pio_write(struct mmc_host *host, const char *buf, - unsigned int size) -{ - unsigned int fifo; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get data buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - - if (status & FTSDC010_STATUS_FIFO_URUN) { - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo = (fifo + 3) >> 2; - - while (fifo--) { - writel(*ptr, &host->reg->dwr); - ptr++; - } - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check RSP TIMEOUT or FAIL */ - if (sta & FTSDC010_STATUS_RSP_TIMEOUT) { - /* RSP TIMEOUT */ - debug("%s: RSP timeout: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) { - /* clear response fail bit */ - debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } else if (sta & FTSDC010_STATUS_RSP_CRC_OK) { - - /* clear response CRC OK bit */ - clear |= FTSDC010_CLR_RSP_CRC_OK; - } - - writel(clear, &host->reg->clr); - return 0; -} - -static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check DATA TIMEOUT or FAIL */ - if (data) { - - /* Transfer Complete */ - if (sta & FTSDC010_STATUS_DATA_END) - clear |= FTSDC010_STATUS_DATA_END; - - /* Data CRC_OK */ - if (sta & FTSDC010_STATUS_DATA_CRC_OK) - clear |= FTSDC010_STATUS_DATA_CRC_OK; - - /* DATA TIMEOUT or DATA CRC FAIL */ - if (sta & FTSDC010_STATUS_DATA_TIMEOUT) { - /* DATA TIMEOUT */ - debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) { - /* DATA CRC FAIL */ - debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } - writel(clear, &host->reg->clr); - } - return 0; -} - -static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - -#ifdef CONFIG_FTSDC010_SDIO - unsigned int scon; -#endif - unsigned int ccon; - unsigned int mask, tmpmask; - unsigned int ret; - unsigned int sta, i; - - ret = 0; - - if (data) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else if (cmd->resp_type & MMC_RSP_PRESENT) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else - mask = FTSDC010_INT_MASK_CMD_SEND; - - /* write argu reg */ - debug("%s: argu: %08x\n", __func__, host->reg->argu); - writel(cmd->cmdarg, &host->reg->argu); - - /* setup commnad */ - ccon = FTSDC010_CMD_IDX(cmd->cmdidx); - - /* setup command flags */ - ccon |= FTSDC010_CMD_CMD_EN; - - /* - * This hardware didn't support specific commands for mapping - * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it. - */ - if (cmd->resp_type & MMC_RSP_PRESENT) { - ccon |= FTSDC010_CMD_NEED_RSP; - mask |= FTSDC010_INT_MASK_RSP_CRC_OK | - FTSDC010_INT_MASK_RSP_CRC_FAIL; - } - - if (cmd->resp_type & MMC_RSP_136) - ccon |= FTSDC010_CMD_LONG_RSP; - - /* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */ - if (host->last_opcode == MMC_CMD_APP_CMD) - ccon |= FTSDC010_CMD_APP_CMD; - -#ifdef CONFIG_FTSDC010_SDIO - scon = readl(&host->reg->sdio_ctrl1); - if (host->card_type == MMC_TYPE_SDIO) - scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - else - scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - writel(scon, &host->reg->sdio_ctrl1); -#endif - - /* record last opcode for specifing the command type to hardware */ - host->last_opcode = cmd->cmdidx; - - /* write int_mask reg */ - tmpmask = readl(&host->reg->int_mask); - tmpmask |= mask; - writel(tmpmask, &host->reg->int_mask); - - /* write cmd reg */ - debug("%s: ccon: %08x\n", __func__, ccon); - writel(ccon, &host->reg->cmd); - - /* check CMD_SEND */ - for (i = 0; i < FTSDC010_CMD_RETRY; i++) { - /* - * If we read status register too fast - * will lead hardware error and the RSP_TIMEOUT - * flag will be raised incorrectly. - */ - udelay(16*FTSDC010_DELAY_UNIT); - sta = readl(&host->reg->status); - - /* Command Complete */ - /* - * Note: - * Do not clear FTSDC010_CLR_CMD_SEND flag. - * (by writing FTSDC010_CLR_CMD_SEND bit to clear register) - * It will make the driver becomes very slow. - * If the operation hasn't been finished, hardware will - * clear this bit automatically. - * In origin, the driver will clear this flag if there is - * no data need to be read. - */ - if (sta & FTSDC010_STATUS_CMD_SEND) - break; - } - - if (i > FTSDC010_CMD_RETRY) { - printf("%s: send command timeout\n", __func__); - return TIMEOUT; - } - - /* check rsp status */ - ret = ftsdc010_check_rsp(mmc, cmd, data); - if (ret) - return ret; - - /* read response if we have RSP_OK */ - if (ccon & FTSDC010_CMD_LONG_RSP) { - cmd->response[0] = readl(&host->reg->rsp3); - cmd->response[1] = readl(&host->reg->rsp2); - cmd->response[2] = readl(&host->reg->rsp1); - cmd->response[3] = readl(&host->reg->rsp0); - } else { - cmd->response[0] = readl(&host->reg->rsp0); - } - - /* read/write data */ - if (data && (data->flags & MMC_DATA_READ)) { - ftsdc010_pio_read(host, data->dest, - data->blocksize * data->blocks); - } else if (data && (data->flags & MMC_DATA_WRITE)) { - ftsdc010_pio_write(host, data->src, - data->blocksize * data->blocks); - } - - /* check data status */ - if (data) { - ret = ftsdc010_check_data(mmc, cmd, data); - if (ret) - return ret; - } - - udelay(FTSDC010_DELAY_UNIT); - return ret; -} - -static unsigned int cal_blksz(unsigned int blksz) -{ - unsigned int blksztwo = 0; - - while (blksz >>= 1) - blksztwo++; - - return blksztwo; -} - -static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int dcon, newmask; - - /* configure data transfer paramter */ - if (!data) - return 0; - - if (((data->blocksize - 1) & data->blocksize) != 0) { - printf("%s: can't do non-power-of 2 sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* - * We cannot deal with unaligned blocks with more than - * one block being transfered. - */ - if ((data->blocksize <= 2) && (data->blocks > 1)) { - printf("%s: can't do non-word sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* data length */ - dcon = data->blocksize * data->blocks; - writel(dcon, &host->reg->dlr); - - /* write data control */ - dcon = cal_blksz(data->blocksize); - - /* add to IMASK register */ - newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT); - - /* - * enable UNDERRUN will trigger interrupt immediatedly - * So setup it when rsp is received successfully - */ - if (data->flags & MMC_DATA_WRITE) { - dcon |= FTSDC010_DCR_DATA_WRITE; - } else { - dcon &= ~FTSDC010_DCR_DATA_WRITE; - newmask |= FTSDC010_STATUS_FIFO_ORUN; - } - enable_imask(host->reg, newmask); - -#ifdef CONFIG_FTSDC010_SDIO - /* always reset fifo since last transfer may fail */ - dcon |= FTSDC010_DCR_FIFO_RST; - - if (data->blocks > 1) - dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE; -#endif - - /* enable data transfer which will be pended until cmd is send */ - dcon |= FTSDC010_DCR_DATA_EN; - writel(dcon, &host->reg->dcr); - - return 0; -} - -static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (data) { - ret = ftsdc010_setup_data(mmc, data); - - if (ret) { - printf("%s: setup data error\n", __func__); - return -1; - } - - if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) { - printf("%s: data is both direction\n", __func__); - return -1; - } - } - - /* Send command */ - ret = ftsdc010_send_cmd(mmc, cmd, data); - return ret; -} - -static int ftsdc010_card_detect(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta; - - sta = readl(&host->reg->status); - debug("%s: card status: %08x\n", __func__, sta); - - return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1; -} - -static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (ftsdc010_card_detect(mmc) == 0) { - printf("%s: no medium present\n", __func__); - return -1; - } else { - ret = ftsdc010_send_request(mmc, cmd, data); - return ret; - } -} - -static void ftsdc010_set_clk(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned char clk_div; - unsigned int real_rate; - unsigned int clock; - - debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock); - clock = readl(&host->reg->ccr); - - if (mmc->clock == 0) { - real_rate = 0; - clock |= FTSDC010_CCR_CLK_DIS; - } else { - debug("%s, mmc->clock: %08x, origin clock: %08x\n", - __func__, mmc->clock, clock); - - for (clk_div = 0; clk_div <= 127; clk_div++) { - real_rate = (CONFIG_SYS_CLK_FREQ / 2) / - (2 * (clk_div + 1)); - - if (real_rate <= mmc->clock) - break; - } - - debug("%s: computed real_rate: %x, clk_div: %x\n", - __func__, real_rate, clk_div); - - if (clk_div > 127) - debug("%s: no match clock rate, %x\n", - __func__, mmc->clock); - - clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) | - FTSDC010_CCR_CLK_DIV(clk_div); - - clock &= ~FTSDC010_CCR_CLK_DIS; - } - - debug("%s, set clock: %08x\n", __func__, clock); - writel(clock, &host->reg->ccr); -} - -static void ftsdc010_set_ios(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int power; - unsigned long val; - unsigned int bus_width; - - debug("%s: bus_width: %x, clock: %d\n", - __func__, mmc->bus_width, mmc->clock); - - /* set pcr: power on */ - power = readl(&host->reg->pcr); - power |= FTSDC010_PCR_POWER_ON; - writel(power, &host->reg->pcr); - - if (mmc->clock) - ftsdc010_set_clk(mmc); - - /* set bwr: bus width reg */ - bus_width = readl(&host->reg->bwr); - bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS | - FTSDC010_BWR_SINGLE_BUS); - - if (mmc->bus_width == 8) - bus_width |= FTSDC010_BWR_WIDE_8_BUS; - else if (mmc->bus_width == 4) - bus_width |= FTSDC010_BWR_WIDE_4_BUS; - else - bus_width |= FTSDC010_BWR_SINGLE_BUS; - - writel(bus_width, &host->reg->bwr); - - /* set fifo depth */ - val = readl(&host->reg->feature); - host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */ - - /* set data timeout register */ - val = -1; - writel(val, &host->reg->dtr); -} - -static void ftsdc010_reset(struct mmc_host *host) -{ - unsigned int timeout; - unsigned int sta; - - /* Do SDC_RST: Software reset for all register */ - writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd); - - host->clock = 0; - - /* this hardware has no reset finish flag to read */ - /* wait 100ms maximum */ - timeout = 100; - - /* hw clears the bit when it's done */ - while (readl(&host->reg->dtr) != 0) { - if (timeout == 0) { - printf("%s: reset timeout error\n", __func__); - return; - } - timeout--; - udelay(10*FTSDC010_DELAY_UNIT); - } - - sta = readl(&host->reg->status); - if (sta & FTSDC010_STATUS_CARD_CHANGE) - writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr); -} - -static int ftsdc010_core_init(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int mask; - unsigned int major, minor, revision; - - /* get hardware version */ - host->version = readl(&host->reg->rev); - - major = FTSDC010_REV_MAJOR(host->version); - minor = FTSDC010_REV_MINOR(host->version); - revision = FTSDC010_REV_REVISION(host->version); - - printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision); - - /* Interrupt MASK register init - mask all */ - writel(0x0, &host->reg->int_mask); - - mask = FTSDC010_INT_MASK_CMD_SEND | - FTSDC010_INT_MASK_DATA_END | - FTSDC010_INT_MASK_CARD_CHANGE; -#ifdef CONFIG_FTSDC010_SDIO - mask |= FTSDC010_INT_MASK_CP_READY | - FTSDC010_INT_MASK_CP_BUF_READY | - FTSDC010_INT_MASK_PLAIN_TEXT_READY | - FTSDC010_INT_MASK_SDIO_IRPT; -#endif - - writel(mask, &host->reg->int_mask); - - return 0; -} - -int ftsdc010_mmc_init(int dev_index) -{ - struct mmc *mmc; - struct mmc_host *host; - - mmc = &ftsdc010_dev[dev_index]; - - sprintf(mmc->name, "FTSDC010 SD/MMC"); - mmc->priv = &ftsdc010_host[dev_index]; - mmc->send_cmd = ftsdc010_request; - mmc->set_ios = ftsdc010_set_ios; - mmc->init = ftsdc010_core_init; - mmc->getcd = NULL; - mmc->getwp = NULL; - - mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; - - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; - - mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128); - mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2; - - ftsdc010_host[dev_index].clock = 0; - ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index); - mmc_register(mmc); - - /* reset mmc */ - host = (struct mmc_host *)mmc->priv; - ftsdc010_reset(host); - - return 0; -} diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c new file mode 100644 index 0000000..562b14a --- /dev/null +++ b/drivers/mmc/ftsdc010_mci.c @@ -0,0 +1,377 @@ +/* + * Faraday MMC/SD Host Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include <common.h> +#include <malloc.h> +#include <part.h> +#include <mmc.h> + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/byteorder.h> +#include <faraday/ftsdc010.h> + +#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ +#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */ + +struct ftsdc010_chip { + void __iomem *regs; + uint32_t wprot; /* write protected (locked) */ + uint32_t rate; /* actual SD clock in Hz */ + uint32_t sclk; /* FTSDC010 source clock in Hz */ + uint32_t fifo; /* fifo depth in bytes */ + uint32_t acmd; +}; + +static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + int ret = TIMEOUT; + uint32_t ts, st; + uint32_t cmd = FTSDC010_CMD_IDX(mmc_cmd->cmdidx); + uint32_t arg = mmc_cmd->cmdarg; + uint32_t flags = mmc_cmd->resp_type; + + cmd |= FTSDC010_CMD_CMD_EN; + + if (chip->acmd) { + cmd |= FTSDC010_CMD_APP_CMD; + chip->acmd = 0; + } + + if (flags & MMC_RSP_PRESENT) + cmd |= FTSDC010_CMD_NEED_RSP; + + if (flags & MMC_RSP_136) + cmd |= FTSDC010_CMD_LONG_RSP; + + writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND, + ®s->clr); + writel(arg, ®s->argu); + writel(cmd, ®s->cmd); + + if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) { + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + if (readl(®s->status) & FTSDC010_STATUS_CMD_SEND) { + writel(FTSDC010_STATUS_CMD_SEND, ®s->clr); + ret = 0; + break; + } + } + } else { + st = 0; + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + writel(st & FTSDC010_STATUS_RSP_MASK, ®s->clr); + if (st & FTSDC010_STATUS_RSP_MASK) + break; + } + if (st & FTSDC010_STATUS_RSP_CRC_OK) { + if (flags & MMC_RSP_136) { + mmc_cmd->response[0] = readl(®s->rsp3); + mmc_cmd->response[1] = readl(®s->rsp2); + mmc_cmd->response[2] = readl(®s->rsp1); + mmc_cmd->response[3] = readl(®s->rsp0); + } else { + mmc_cmd->response[0] = readl(®s->rsp0); + } + ret = 0; + } else { + debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n", + mmc_cmd->cmdidx, st); + } + } + + if (ret) { + debug("ftsdc010: cmd timeout (op code=%d)\n", + mmc_cmd->cmdidx); + } else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) { + chip->acmd = 1; + } + + return ret; +} + +static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t div; + + for (div = 0; div < 0x7f; ++div) { + if (rate >= chip->sclk / (2 * (div + 1))) + break; + } + chip->rate = chip->sclk / (2 * (div + 1)); + + writel(FTSDC010_CCR_CLK_DIV(div), ®s->ccr); + + if (IS_SD(mmc)) { + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_SD); + + if (chip->rate > 25000000) + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + else + clrbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + } +} + +static inline int ftsdc010_is_ro(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + const uint8_t *csd = (const uint8_t *)mmc->csd; + + return chip->wprot || (csd[1] & 0x30); +} + +static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask) +{ + int ret = TIMEOUT; + uint32_t st, ts; + + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + if (!(st & mask)) + continue; + writel(st & mask, ®s->clr); + ret = 0; + break; + } + + if (ret) + debug("ftsdc010: wait st(0x%x) timeout\n", mask); + + return ret; +} + +/* + * u-boot mmc api + */ + +static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int ret = UNUSABLE_ERR; + uint32_t len = 0; + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) { + printf("ftsdc010: the card is write protected!\n"); + return ret; + } + + if (data) { + uint32_t dcr; + + len = data->blocksize * data->blocks; + + /* 1. data disable + fifo reset */ + writel(FTSDC010_DCR_FIFO_RST, ®s->dcr); + + /* 2. clear status register */ + writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN + | FTSDC010_STATUS_FIFO_ORUN, ®s->clr); + + /* 3. data timeout (1 sec) */ + writel(chip->rate, ®s->dtr); + + /* 4. data length (bytes) */ + writel(len, ®s->dlr); + + /* 5. data enable */ + dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN; + if (data->flags & MMC_DATA_WRITE) + dcr |= FTSDC010_DCR_DATA_WRITE; + writel(dcr, ®s->dcr); + } + + ret = ftsdc010_send_cmd(mmc, cmd); + if (ret) { + printf("ftsdc010: CMD%d failed\n", cmd->cmdidx); + return ret; + } + + if (!data) + return ret; + + if (data->flags & MMC_DATA_WRITE) { + const uint8_t *buf = (const uint8_t *)data->src; + + while (len > 0) { + int wlen; + + /* wait for tx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN); + if (ret) + break; + + /* write bytes to ftsdc010 */ + for (wlen = 0; wlen < len && wlen < chip->fifo; ) { + writel(*(uint32_t *)buf, ®s->dwr); + buf += 4; + wlen += 4; + } + + len -= wlen; + } + + } else { + uint8_t *buf = (uint8_t *)data->dest; + + while (len > 0) { + int rlen; + + /* wait for rx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN); + if (ret) + break; + + /* fetch bytes from ftsdc010 */ + for (rlen = 0; rlen < len && rlen < chip->fifo; ) { + *(uint32_t *)buf = readl(®s->dwr); + buf += 4; + rlen += 4; + } + + len -= rlen; + } + + } + + if (!ret) { + ret = ftsdc010_wait(regs, + FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR); + } + + return ret; +} + +static void ftsdc010_set_ios(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + ftsdc010_clkset(mmc, mmc->clock); + + clrbits_le32(®s->bwr, FTSDC010_BWR_MODE_MASK); + switch (mmc->bus_width) { + case 4: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_4BIT); + break; + case 8: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_8BIT); + break; + default: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_1BIT); + break; + } +} + +static int ftsdc010_init(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t ts; + + if (readl(®s->status) & FTSDC010_STATUS_CARD_DETECT) + return NO_CARD_ERR; + + if (readl(®s->status) & FTSDC010_STATUS_WRITE_PROT) { + printf("ftsdc010: write protected\n"); + chip->wprot = 1; + } + + chip->fifo = (readl(®s->feature) & 0xff) << 2; + + /* 1. chip reset */ + writel(FTSDC010_CMD_SDC_RST, ®s->cmd); + for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) { + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) + continue; + break; + } + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) { + printf("ftsdc010: reset failed\n"); + return UNUSABLE_ERR; + } + + /* 2. enter low speed mode (400k card detection) */ + ftsdc010_clkset(mmc, 400000); + + /* 3. interrupt disabled */ + writel(0, ®s->int_mask); + + return 0; +} + +int ftsdc010_mmc_init(int devid) +{ + struct mmc *mmc; + struct ftsdc010_chip *chip; + struct ftsdc010_mmc __iomem *regs; +#ifdef CONFIG_FTSDC010_BASE_LIST + uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST; + + if (devid < 0 || devid >= ARRAY_SIZE(base_list)) + return -1; + regs = (void __iomem *)base_list[devid]; +#else + regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20)); +#endif + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) + return -ENOMEM; + memset(mmc, 0, sizeof(struct mmc)); + + chip = malloc(sizeof(struct ftsdc010_chip)); + if (!chip) { + free(mmc); + return -ENOMEM; + } + memset(chip, 0, sizeof(struct ftsdc010_chip)); + + chip->regs = regs; + mmc->priv = chip; + + sprintf(mmc->name, "ftsdc010"); + mmc->send_cmd = ftsdc010_request; + mmc->set_ios = ftsdc010_set_ios; + mmc->init = ftsdc010_init; + + mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz; + switch (readl(®s->bwr) & FTSDC010_BWR_CAPS_MASK) { + case FTSDC010_BWR_CAPS_4BIT: + mmc->host_caps |= MMC_MODE_4BIT; + break; + case FTSDC010_BWR_CAPS_8BIT: + mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT; + break; + default: + break; + } + +#ifdef CONFIG_SYS_CLK_FREQ + chip->sclk = CONFIG_SYS_CLK_FREQ; +#else + chip->sclk = clk_get_rate("SDC"); +#endif + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->f_max = chip->sclk / 2; + mmc->f_min = chip->sclk / 0x100; + mmc->block_dev.part_type = PART_TYPE_DOS; + + mmc_register(mmc); + + return 0; +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 9c0652d..a492bbb 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -524,48 +524,70 @@ static int sd_send_op_cond(struct mmc *mmc) return 0; } -static int mmc_send_op_cond(struct mmc *mmc) +/* We pass in the cmd since otherwise the init seems to fail */ +static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd, + int use_arg) { - int timeout = 10000; - struct mmc_cmd cmd; int err; + cmd->cmdidx = MMC_CMD_SEND_OP_COND; + cmd->resp_type = MMC_RSP_R3; + cmd->cmdarg = 0; + if (use_arg && !mmc_host_is_spi(mmc)) { + cmd->cmdarg = + (mmc->voltages & + (mmc->op_cond_response & OCR_VOLTAGE_MASK)) | + (mmc->op_cond_response & OCR_ACCESS_MODE); + + if (mmc->host_caps & MMC_MODE_HC) + cmd->cmdarg |= OCR_HCS; + } + err = mmc_send_cmd(mmc, cmd, NULL); + if (err) + return err; + mmc->op_cond_response = cmd->response[0]; + return 0; +} + +int mmc_send_op_cond(struct mmc *mmc) +{ + struct mmc_cmd cmd; + int err, i; + /* Some cards seem to need this */ mmc_go_idle(mmc); /* Asking to the card its capabilities */ - cmd.cmdidx = MMC_CMD_SEND_OP_COND; - cmd.resp_type = MMC_RSP_R3; - cmd.cmdarg = 0; - - err = mmc_send_cmd(mmc, &cmd, NULL); + mmc->op_cond_pending = 1; + for (i = 0; i < 2; i++) { + err = mmc_send_op_cond_iter(mmc, &cmd, i != 0); + if (err) + return err; - if (err) - return err; + /* exit if not busy (flag seems to be inverted) */ + if (mmc->op_cond_response & OCR_BUSY) + return 0; + } + return IN_PROGRESS; +} - udelay(1000); +int mmc_complete_op_cond(struct mmc *mmc) +{ + struct mmc_cmd cmd; + int timeout = 1000; + uint start; + int err; + mmc->op_cond_pending = 0; + start = get_timer(0); do { - cmd.cmdidx = MMC_CMD_SEND_OP_COND; - cmd.resp_type = MMC_RSP_R3; - cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 : - (mmc->voltages & - (cmd.response[0] & OCR_VOLTAGE_MASK)) | - (cmd.response[0] & OCR_ACCESS_MODE)); - - if (mmc->host_caps & MMC_MODE_HC) - cmd.cmdarg |= OCR_HCS; - - err = mmc_send_cmd(mmc, &cmd, NULL); - + err = mmc_send_op_cond_iter(mmc, &cmd, 1); if (err) return err; - - udelay(1000); - } while (!(cmd.response[0] & OCR_BUSY) && timeout--); - - if (timeout <= 0) - return UNUSABLE_ERR; + if (get_timer(start) > timeout) + return UNUSABLE_ERR; + udelay(100); + } while (!(mmc->op_cond_response & OCR_BUSY)); if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ cmd.cmdidx = MMC_CMD_SPI_READ_OCR; @@ -1274,7 +1296,7 @@ block_dev_desc_t *mmc_get_dev(int dev) } #endif -int mmc_init(struct mmc *mmc) +int mmc_start_init(struct mmc *mmc) { int err; @@ -1314,17 +1336,48 @@ int mmc_init(struct mmc *mmc) if (err == TIMEOUT) { err = mmc_send_op_cond(mmc); - if (err) { + if (err && err != IN_PROGRESS) { printf("Card did not respond to voltage select!\n"); return UNUSABLE_ERR; } } - err = mmc_startup(mmc); + if (err == IN_PROGRESS) + mmc->init_in_progress = 1; + + return err; +} + +static int mmc_complete_init(struct mmc *mmc) +{ + int err = 0; + + if (mmc->op_cond_pending) + err = mmc_complete_op_cond(mmc); + + if (!err) + err = mmc_startup(mmc); if (err) mmc->has_init = 0; else mmc->has_init = 1; + mmc->init_in_progress = 0; + return err; +} + +int mmc_init(struct mmc *mmc) +{ + int err = IN_PROGRESS; + unsigned start = get_timer(0); + + if (mmc->has_init) + return 0; + if (!mmc->init_in_progress) + err = mmc_start_init(mmc); + + if (!err || err == IN_PROGRESS) + err = mmc_complete_init(mmc); + debug("%s: %d, time %lu\n", __func__, err, get_timer(start)); return err; } @@ -1362,6 +1415,25 @@ int get_mmc_num(void) return cur_dev_num; } +void mmc_set_preinit(struct mmc *mmc, int preinit) +{ + mmc->preinit = preinit; +} + +static void do_preinit(void) +{ + struct mmc *m; + struct list_head *entry; + + list_for_each(entry, &mmc_devices) { + m = list_entry(entry, struct mmc, link); + + if (m->preinit) + mmc_start_init(m); + } +} + + int mmc_initialize(bd_t *bis) { INIT_LIST_HEAD (&mmc_devices); @@ -1372,6 +1444,7 @@ int mmc_initialize(bd_t *bis) print_mmc_devices(','); + do_preinit(); return 0; } diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c index 2fe34b6..63e1f90 100644 --- a/drivers/mmc/mv_sdhci.c +++ b/drivers/mmc/mv_sdhci.c @@ -51,6 +51,5 @@ int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; else host->version = sdhci_readw(host, SDHCI_HOST_VERSION); - add_sdhci(host, max_clk, min_clk); - return 0; + return add_sdhci(host, max_clk, min_clk); } diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index afdfa88..975b2c5 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -113,23 +113,21 @@ static void omap5_pbias_config(struct mmc *mmc) u32 value = 0; value = readl((*ctrl)->control_pbias); - value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); - value |= SDCARD_BIAS_HIZ_MODE; + value &= ~SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(10); /* wait 10 us */ + value &= ~SDCARD_BIAS_PWRDNZ; writel(value, (*ctrl)->control_pbias); palmas_mmc1_poweron_ldo(); value = readl((*ctrl)->control_pbias); - value &= ~SDCARD_BIAS_HIZ_MODE; - value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ; + value |= SDCARD_BIAS_PWRDNZ; writel(value, (*ctrl)->control_pbias); - - value = readl((*ctrl)->control_pbias); - if (value & (1 << 23)) { - value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); - value |= SDCARD_BIAS_HIZ_MODE; - writel(value, (*ctrl)->control_pbias); - } + udelay(150); /* wait 150 us */ + value |= SDCARD_PWRDNZ; + writel(value, (*ctrl)->control_pbias); + udelay(150); /* wait 150 us */ } #endif diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index dc49d37..e50ff92 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -94,6 +94,5 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->host_caps = MMC_MODE_HC; - add_sdhci(host, 52000000, 400000); - return 0; + return add_sdhci(host, 52000000, 400000); } diff --git a/drivers/mmc/spear_sdhci.c b/drivers/mmc/spear_sdhci.c new file mode 100644 index 0000000..23f1f4b --- /dev/null +++ b/drivers/mmc/spear_sdhci.c @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2012 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +int spear_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) +{ + struct sdhci_host *host = NULL; + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("sdhci host malloc fail!\n"); + return 1; + } + + host->name = "sdhci"; + host->ioaddr = (void *)regbase; + host->quirks = quirks; + + if (quirks & SDHCI_QUIRK_REG32_RW) + host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; + else + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + add_sdhci(host, max_clk, min_clk); + return 0; +} diff --git a/drivers/mmc/spl_mmc.c b/drivers/mmc/spl_mmc.c deleted file mode 100644 index 7efdcb8..0000000 --- a/drivers/mmc/spl_mmc.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <spl.h> -#include <asm/u-boot.h> -#include <asm/utils.h> -#include <mmc.h> -#include <fat.h> -#include <version.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void mmc_load_image_raw(struct mmc *mmc) -{ - unsigned long err; - u32 image_size_sectors; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - /* read image header to find the image size & load address */ - err = mmc->block_dev.block_read(0, - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1, - header); - - if (err == 0) - goto end; - - spl_parse_image_header(header); - - /* convert size to sectors - round up */ - image_size_sectors = (spl_image.size + mmc->read_bl_len - 1) / - mmc->read_bl_len; - - /* Read the header too to avoid extra memcpy */ - err = mmc->block_dev.block_read(0, - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, - image_size_sectors, (void *)spl_image.load_addr); - -end: - if (err == 0) { - printf("spl: mmc blk read err - %lu\n", err); - hang(); - } -} - -#ifdef CONFIG_SPL_FAT_SUPPORT -static void mmc_load_image_fat(struct mmc *mmc) -{ - int err; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - err = fat_register_device(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION); - if (err) { - printf("spl: fat register err - %d\n", err); - hang(); - } - - err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, - header, sizeof(struct image_header)); - if (err <= 0) - goto end; - - spl_parse_image_header(header); - - err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, - (u8 *)spl_image.load_addr, 0); - -end: - if (err <= 0) { - printf("spl: error reading image %s, err - %d\n", - CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err); - hang(); - } -} -#endif - -void spl_mmc_load_image(void) -{ - struct mmc *mmc; - int err; - u32 boot_mode; - - mmc_initialize(gd->bd); - /* We register only one device. So, the dev id is always 0 */ - mmc = find_mmc_device(0); - if (!mmc) { - puts("spl: mmc device not found!!\n"); - hang(); - } - - err = mmc_init(mmc); - if (err) { - printf("spl: mmc init failed: err - %d\n", err); - hang(); - } - boot_mode = spl_boot_mode(); - if (boot_mode == MMCSD_MODE_RAW) { - debug("boot mode - RAW\n"); - mmc_load_image_raw(mmc); -#ifdef CONFIG_SPL_FAT_SUPPORT - } else if (boot_mode == MMCSD_MODE_FAT) { - debug("boot mode - FAT\n"); - mmc_load_image_fat(mmc); -#endif - } else { - puts("spl: wrong MMC boot mode\n"); - hang(); - } -} |