summaryrefslogtreecommitdiff
path: root/drivers/mmc/mxsmmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/mxsmmc.c')
-rw-r--r--drivers/mmc/mxsmmc.c46
1 files changed, 20 insertions, 26 deletions
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 8e2016f..c2aa4aa 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -43,13 +43,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/dma.h>
-/*
- * CONFIG_MXS_MMC_DMA: This feature is highly experimental and has no
- * performance benefit unless you operate the platform with
- * data cache enabled. This is disabled by default, enable
- * only if you know what you're doing.
- */
-
struct mxsmmc_priv {
int id;
struct mxs_ssp_regs *regs;
@@ -61,8 +54,8 @@ struct mxsmmc_priv {
};
#define MXSMMC_MAX_TIMEOUT 10000
+#define MXSMMC_SMALL_TRANSFER 512
-#ifndef CONFIG_MXS_MMC_DMA
static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
{
struct mxs_ssp_regs *ssp_regs = priv->regs;
@@ -98,7 +91,7 @@ static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
return timeout ? 0 : COMM_ERR;
}
-#else
+
static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
{
uint32_t data_count = data->blocksize * data->blocks;
@@ -139,7 +132,6 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
return 0;
}
-#endif
/*
* Sends a command out on the bus. Takes the mmc pointer,
@@ -271,24 +263,26 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
if (!data)
return 0;
-#ifdef CONFIG_MXS_MMC_DMA
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
-
- ret = mxsmmc_send_cmd_dma(priv, data);
- if (ret) {
- printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev);
- return ret;
- }
-#else
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
+ if (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER) {
+ writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
- ret = mxsmmc_send_cmd_pio(priv, data);
- if (ret) {
- printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n",
- mmc->block_dev.dev, cmd->cmdidx, reg);
- return ret;
+ ret = mxsmmc_send_cmd_dma(priv, data);
+ if (ret) {
+ printf("MMC%d: DMA transfer failed\n",
+ mmc->block_dev.dev);
+ return ret;
+ }
+ } else {
+ writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
+
+ ret = mxsmmc_send_cmd_pio(priv, data);
+ if (ret) {
+ printf("MMC%d: Data timeout with command %d "
+ "(status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return ret;
+ }
}
-#endif
/* Check data errors */
reg = readl(&ssp_regs->hw_ssp_status);