summaryrefslogtreecommitdiff
path: root/drivers/misc/cros_ec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/cros_ec.c')
-rw-r--r--drivers/misc/cros_ec.c611
1 files changed, 559 insertions, 52 deletions
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 301e8eb..068373b 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -7,10 +7,11 @@
*/
/*
- * The Matrix Keyboard Protocol driver handles talking to the keyboard
- * controller chip. Mostly this is for keyboard functions, but some other
- * things have slipped in, so we provide generic services to talk to the
- * KBC.
+ * This is the interface to the Chrome OS EC. It provides keyboard functions,
+ * power control and battery management. Quite a few other functions are
+ * provided to enable the EC software to be updated, talk to the EC's I2C bus
+ * and store a small amount of data in a memory which persists while the EC
+ * is not reset.
*/
#include <common.h>
@@ -20,6 +21,7 @@
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
+#include <asm/errno.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>
@@ -73,11 +75,184 @@ int cros_ec_calc_checksum(const uint8_t *data, int size)
return csum & 0xff;
}
+/**
+ * Create a request packet for protocol version 3.
+ *
+ * The packet is stored in the device's internal output buffer.
+ *
+ * @param dev CROS-EC device
+ * @param cmd Command to send (EC_CMD_...)
+ * @param cmd_version Version of command to send (EC_VER_...)
+ * @param dout Output data (may be NULL If dout_len=0)
+ * @param dout_len Size of output data in bytes
+ * @return packet size in bytes, or <0 if error.
+ */
+static int create_proto3_request(struct cros_ec_dev *dev,
+ int cmd, int cmd_version,
+ const void *dout, int dout_len)
+{
+ struct ec_host_request *rq = (struct ec_host_request *)dev->dout;
+ int out_bytes = dout_len + sizeof(*rq);
+
+ /* Fail if output size is too big */
+ if (out_bytes > (int)sizeof(dev->dout)) {
+ debug("%s: Cannot send %d bytes\n", __func__, dout_len);
+ return -EC_RES_REQUEST_TRUNCATED;
+ }
+
+ /* Fill in request packet */
+ rq->struct_version = EC_HOST_REQUEST_VERSION;
+ rq->checksum = 0;
+ rq->command = cmd;
+ rq->command_version = cmd_version;
+ rq->reserved = 0;
+ rq->data_len = dout_len;
+
+ /* Copy data after header */
+ memcpy(rq + 1, dout, dout_len);
+
+ /* Write checksum field so the entire packet sums to 0 */
+ rq->checksum = (uint8_t)(-cros_ec_calc_checksum(dev->dout, out_bytes));
+
+ cros_ec_dump_data("out", cmd, dev->dout, out_bytes);
+
+ /* Return size of request packet */
+ return out_bytes;
+}
+
+/**
+ * Prepare the device to receive a protocol version 3 response.
+ *
+ * @param dev CROS-EC device
+ * @param din_len Maximum size of response in bytes
+ * @return maximum expected number of bytes in response, or <0 if error.
+ */
+static int prepare_proto3_response_buffer(struct cros_ec_dev *dev, int din_len)
+{
+ int in_bytes = din_len + sizeof(struct ec_host_response);
+
+ /* Fail if input size is too big */
+ if (in_bytes > (int)sizeof(dev->din)) {
+ debug("%s: Cannot receive %d bytes\n", __func__, din_len);
+ return -EC_RES_RESPONSE_TOO_BIG;
+ }
+
+ /* Return expected size of response packet */
+ return in_bytes;
+}
+
+/**
+ * Handle a protocol version 3 response packet.
+ *
+ * The packet must already be stored in the device's internal input buffer.
+ *
+ * @param dev CROS-EC device
+ * @param dinp Returns pointer to response data
+ * @param din_len Maximum size of response in bytes
+ * @return number of bytes of response data, or <0 if error
+ */
+static int handle_proto3_response(struct cros_ec_dev *dev,
+ uint8_t **dinp, int din_len)
+{
+ struct ec_host_response *rs = (struct ec_host_response *)dev->din;
+ int in_bytes;
+ int csum;
+
+ cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs));
+
+ /* Check input data */
+ if (rs->struct_version != EC_HOST_RESPONSE_VERSION) {
+ debug("%s: EC response version mismatch\n", __func__);
+ return -EC_RES_INVALID_RESPONSE;
+ }
+
+ if (rs->reserved) {
+ debug("%s: EC response reserved != 0\n", __func__);
+ return -EC_RES_INVALID_RESPONSE;
+ }
+
+ if (rs->data_len > din_len) {
+ debug("%s: EC returned too much data\n", __func__);
+ return -EC_RES_RESPONSE_TOO_BIG;
+ }
+
+ cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len);
+
+ /* Update in_bytes to actual data size */
+ in_bytes = sizeof(*rs) + rs->data_len;
+
+ /* Verify checksum */
+ csum = cros_ec_calc_checksum(dev->din, in_bytes);
+ if (csum) {
+ debug("%s: EC response checksum invalid: 0x%02x\n", __func__,
+ csum);
+ return -EC_RES_INVALID_CHECKSUM;
+ }
+
+ /* Return error result, if any */
+ if (rs->result)
+ return -(int)rs->result;
+
+ /* If we're still here, set response data pointer and return length */
+ *dinp = (uint8_t *)(rs + 1);
+
+ return rs->data_len;
+}
+
+static int send_command_proto3(struct cros_ec_dev *dev,
+ int cmd, int cmd_version,
+ const void *dout, int dout_len,
+ uint8_t **dinp, int din_len)
+{
+ int out_bytes, in_bytes;
+ int rv;
+
+ /* Create request packet */
+ out_bytes = create_proto3_request(dev, cmd, cmd_version,
+ dout, dout_len);
+ if (out_bytes < 0)
+ return out_bytes;
+
+ /* Prepare response buffer */
+ in_bytes = prepare_proto3_response_buffer(dev, din_len);
+ if (in_bytes < 0)
+ return in_bytes;
+
+ switch (dev->interface) {
+#ifdef CONFIG_CROS_EC_SPI
+ case CROS_EC_IF_SPI:
+ rv = cros_ec_spi_packet(dev, out_bytes, in_bytes);
+ break;
+#endif
+#ifdef CONFIG_CROS_EC_SANDBOX
+ case CROS_EC_IF_SANDBOX:
+ rv = cros_ec_sandbox_packet(dev, out_bytes, in_bytes);
+ break;
+#endif
+ case CROS_EC_IF_NONE:
+ /* TODO: support protocol 3 for LPC, I2C; for now fall through */
+ default:
+ debug("%s: Unsupported interface\n", __func__);
+ rv = -1;
+ }
+ if (rv < 0)
+ return rv;
+
+ /* Process the response */
+ return handle_proto3_response(dev, dinp, din_len);
+}
+
static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
- int ret;
+ int ret = -1;
+
+ /* Handle protocol version 3 support */
+ if (dev->protocol_version == 3) {
+ return send_command_proto3(dev, cmd, cmd_version,
+ dout, dout_len, dinp, din_len);
+ }
switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
@@ -129,19 +304,15 @@ static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd,
int cmd_version, const void *dout, int dout_len, uint8_t **dinp,
int din_len)
{
- uint8_t *din;
+ uint8_t *din = NULL;
int len;
- if (cmd_version != 0 && !dev->cmd_version_is_supported) {
- debug("%s: Command version >0 unsupported\n", __func__);
- return -1;
- }
len = send_command(dev, cmd, cmd_version, dout, dout_len,
&din, din_len);
/* If the command doesn't complete, wait a while */
if (len == -EC_RES_IN_PROGRESS) {
- struct ec_response_get_comms_status *resp;
+ struct ec_response_get_comms_status *resp = NULL;
ulong start;
/* Wait for command to complete */
@@ -169,7 +340,8 @@ static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd,
NULL, 0, &din, din_len);
}
- debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp, *dinp);
+ debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp,
+ dinp ? *dinp : NULL);
if (dinp) {
/* If we have any data to return, it must be 64bit-aligned */
assert(len <= 0 || !((uintptr_t)din & 7));
@@ -220,8 +392,8 @@ static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan)
{
- if (ec_command(dev, EC_CMD_CROS_EC_STATE, 0, NULL, 0, scan,
- sizeof(scan->data)) < sizeof(scan->data))
+ if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
+ sizeof(scan->data)) != sizeof(scan->data))
return -1;
return 0;
@@ -232,10 +404,10 @@ int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen)
struct ec_response_get_version *r;
if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
- (uint8_t **)&r, sizeof(*r)) < sizeof(*r))
+ (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
return -1;
- if (maxlen > sizeof(r->version_string_ro))
+ if (maxlen > (int)sizeof(r->version_string_ro))
maxlen = sizeof(r->version_string_ro);
switch (r->current_image) {
@@ -258,7 +430,7 @@ int cros_ec_read_version(struct cros_ec_dev *dev,
{
if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
(uint8_t **)versionp, sizeof(**versionp))
- < sizeof(**versionp))
+ != sizeof(**versionp))
return -1;
return 0;
@@ -267,7 +439,7 @@ int cros_ec_read_version(struct cros_ec_dev *dev,
int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp)
{
if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
- (uint8_t **)strp, EC_HOST_PARAM_SIZE) < 0)
+ (uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0)
return -1;
return 0;
@@ -279,7 +451,7 @@ int cros_ec_read_current_image(struct cros_ec_dev *dev,
struct ec_response_get_version *r;
if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
- (uint8_t **)&r, sizeof(*r)) < sizeof(*r))
+ (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
return -1;
*image = r->current_image;
@@ -336,7 +508,7 @@ int cros_ec_read_hash(struct cros_ec_dev *dev,
debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
__func__, hash->status, hash->size);
- p.cmd = EC_VBOOT_HASH_RECALC;
+ p.cmd = EC_VBOOT_HASH_START;
p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
p.nonce_size = 0;
p.offset = EC_VBOOT_HASH_OFFSET_RW;
@@ -413,15 +585,15 @@ int cros_ec_interrupt_pending(struct cros_ec_dev *dev)
{
/* no interrupt support : always poll */
if (!fdt_gpio_isvalid(&dev->ec_int))
- return 1;
+ return -ENOENT;
return !gpio_get_value(dev->ec_int.gpio);
}
-int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_cros_ec_info *info)
+int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_mkbp_info *info)
{
- if (ec_command(dev, EC_CMD_CROS_EC_INFO, 0, NULL, 0, info,
- sizeof(*info)) < sizeof(*info))
+ if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info,
+ sizeof(*info)) != sizeof(*info))
return -1;
return 0;
@@ -436,7 +608,7 @@ int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr)
* used by ACPI/SMI.
*/
if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
- (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp))
+ (uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp))
return -1;
if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
@@ -474,7 +646,7 @@ int cros_ec_flash_protect(struct cros_ec_dev *dev,
if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
&params, sizeof(params),
- resp, sizeof(*resp)) < sizeof(*resp))
+ resp, sizeof(*resp)) != sizeof(*resp))
return -1;
return 0;
@@ -504,23 +676,30 @@ static int cros_ec_check_version(struct cros_ec_dev *dev)
*
* So for now, just read all the data anyway.
*/
- dev->cmd_version_is_supported = 1;
+
+ /* Try sending a version 3 packet */
+ dev->protocol_version = 3;
+ if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
+ (uint8_t **)&resp, sizeof(*resp)) > 0) {
+ return 0;
+ }
+
+ /* Try sending a version 2 packet */
+ dev->protocol_version = 2;
if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
(uint8_t **)&resp, sizeof(*resp)) > 0) {
- /* It appears to understand new version commands */
- dev->cmd_version_is_supported = 1;
- } else {
- dev->cmd_version_is_supported = 0;
- if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req,
- sizeof(req), (uint8_t **)&resp,
- sizeof(*resp)) < 0) {
- debug("%s: Failed both old and new command style\n",
- __func__);
- return -1;
- }
+ return 0;
}
- return 0;
+ /*
+ * Fail if we're still here, since the EC doesn't understand any
+ * protcol version we speak. Version 1 interface without command
+ * version is no longer supported, and we don't know about any new
+ * protocol versions.
+ */
+ dev->protocol_version = 0;
+ printf("%s: ERROR: old EC interface not supported\n", __func__);
+ return -1;
}
int cros_ec_test(struct cros_ec_dev *dev)
@@ -599,8 +778,8 @@ static int cros_ec_flash_write_block(struct cros_ec_dev *dev,
p.offset = offset;
p.size = size;
- assert(data && p.size <= sizeof(p.data));
- memcpy(p.data, data, p.size);
+ assert(data && p.size <= EC_FLASH_WRITE_VER0_SIZE);
+ memcpy(&p + 1, data, p.size);
return ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
&p, sizeof(p), NULL, 0) >= 0 ? 0 : -1;
@@ -611,8 +790,7 @@ static int cros_ec_flash_write_block(struct cros_ec_dev *dev,
*/
static int cros_ec_flash_write_burst_size(struct cros_ec_dev *dev)
{
- struct ec_params_flash_write p;
- return sizeof(p.data);
+ return EC_FLASH_WRITE_VER0_SIZE;
}
/**
@@ -718,7 +896,7 @@ int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size))
return -1;
- if (image_size > rw_size)
+ if (image_size > (int)rw_size)
return -1;
/* Invalidate the existing hash, just in case the AP reboots
@@ -804,7 +982,7 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
&params, sizeof(params),
- (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp))
+ (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
return -1;
*state = resp->state;
@@ -813,7 +991,8 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
}
/**
- * Decode MBKP details from the device tree and allocate a suitable device.
+ * Decode EC interface details from the device tree and allocate a suitable
+ * device.
*
* @param blob Device tree blob
* @param node Node to decode from
@@ -859,6 +1038,11 @@ static int cros_ec_decode_fdt(const void *blob, int node,
dev->interface = CROS_EC_IF_LPC;
break;
#endif
+#ifdef CONFIG_CROS_EC_SANDBOX
+ case COMPAT_SANDBOX_HOST_EMULATION:
+ dev->interface = CROS_EC_IF_SANDBOX;
+ break;
+#endif
default:
debug("%s: Unknown compat id %d\n", __func__, compat);
return -1;
@@ -914,6 +1098,12 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
return -CROS_EC_ERR_DEV_INIT;
break;
#endif
+#ifdef CONFIG_CROS_EC_SANDBOX
+ case CROS_EC_IF_SANDBOX:
+ if (cros_ec_sandbox_init(dev, blob))
+ return -CROS_EC_ERR_DEV_INIT;
+ break;
+#endif
case CROS_EC_IF_NONE:
default:
return 0;
@@ -941,7 +1131,6 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
return 0;
}
-#ifdef CONFIG_CMD_CROS_EC
int cros_ec_decode_region(int argc, char * const argv[])
{
if (argc > 0) {
@@ -958,6 +1147,139 @@ int cros_ec_decode_region(int argc, char * const argv[])
return -1;
}
+int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config)
+{
+ int flash_node, node;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC);
+ if (node < 0) {
+ debug("Failed to find chrome-ec node'\n");
+ return -1;
+ }
+
+ flash_node = fdt_subnode_offset(blob, node, "flash");
+ if (flash_node < 0) {
+ debug("Failed to find flash node\n");
+ return -1;
+ }
+
+ if (fdtdec_read_fmap_entry(blob, flash_node, "flash",
+ &config->flash)) {
+ debug("Failed to decode flash node in chrome-ec'\n");
+ return -1;
+ }
+
+ config->flash_erase_value = fdtdec_get_int(blob, flash_node,
+ "erase-value", -1);
+ for (node = fdt_first_subnode(blob, flash_node); node >= 0;
+ node = fdt_next_subnode(blob, node)) {
+ const char *name = fdt_get_name(blob, node, NULL);
+ enum ec_flash_region region;
+
+ if (0 == strcmp(name, "ro")) {
+ region = EC_FLASH_REGION_RO;
+ } else if (0 == strcmp(name, "rw")) {
+ region = EC_FLASH_REGION_RW;
+ } else if (0 == strcmp(name, "wp-ro")) {
+ region = EC_FLASH_REGION_WP_RO;
+ } else {
+ debug("Unknown EC flash region name '%s'\n", name);
+ return -1;
+ }
+
+ if (fdtdec_read_fmap_entry(blob, node, "reg",
+ &config->region[region])) {
+ debug("Failed to decode flash region in chrome-ec'\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
+ int alen, uchar *buffer, int len, int is_read)
+{
+ union {
+ struct ec_params_i2c_passthru p;
+ uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
+ } params;
+ union {
+ struct ec_response_i2c_passthru r;
+ uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
+ } response;
+ struct ec_params_i2c_passthru *p = &params.p;
+ struct ec_response_i2c_passthru *r = &response.r;
+ struct ec_params_i2c_passthru_msg *msg = p->msg;
+ uint8_t *pdata;
+ int read_len, write_len;
+ int size;
+ int rv;
+
+ p->port = 0;
+
+ if (alen != 1) {
+ printf("Unsupported address length %d\n", alen);
+ return -1;
+ }
+ if (is_read) {
+ read_len = len;
+ write_len = alen;
+ p->num_msgs = 2;
+ } else {
+ read_len = 0;
+ write_len = alen + len;
+ p->num_msgs = 1;
+ }
+
+ size = sizeof(*p) + p->num_msgs * sizeof(*msg);
+ if (size + write_len > sizeof(params)) {
+ puts("Params too large for buffer\n");
+ return -1;
+ }
+ if (sizeof(*r) + read_len > sizeof(response)) {
+ puts("Read length too big for buffer\n");
+ return -1;
+ }
+
+ /* Create a message to write the register address and optional data */
+ pdata = (uint8_t *)p + size;
+ msg->addr_flags = chip;
+ msg->len = write_len;
+ pdata[0] = addr;
+ if (!is_read)
+ memcpy(pdata + 1, buffer, len);
+ msg++;
+
+ if (read_len) {
+ msg->addr_flags = chip | EC_I2C_FLAG_READ;
+ msg->len = read_len;
+ }
+
+ rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len,
+ r, sizeof(*r) + read_len);
+ if (rv < 0)
+ return rv;
+
+ /* Parse response */
+ if (r->i2c_status & EC_I2C_STATUS_ERROR) {
+ printf("Transfer failed with status=0x%x\n", r->i2c_status);
+ return -1;
+ }
+
+ if (rv < sizeof(*r) + read_len) {
+ puts("Truncated read response\n");
+ return -1;
+ }
+
+ if (read_len)
+ memcpy(buffer, r->data, read_len);
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_CROS_EC
+
/**
* Perform a flash read or write command
*
@@ -1011,6 +1333,187 @@ static int do_read_write(struct cros_ec_dev *dev, int is_write, int argc,
return 0;
}
+/**
+ * get_alen() - Small parser helper function to get address length
+ *
+ * Returns the address length.
+ */
+static uint get_alen(char *arg)
+{
+ int j;
+ int alen;
+
+ alen = 1;
+ for (j = 0; j < 8; j++) {
+ if (arg[j] == '.') {
+ alen = arg[j+1] - '0';
+ break;
+ } else if (arg[j] == '\0') {
+ break;
+ }
+ }
+ return alen;
+}
+
+#define DISP_LINE_LEN 16
+
+/*
+ * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c
+ * so we can remove it later.
+ */
+static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc,
+ char * const argv[])
+{
+ u_char chip;
+ uint addr, alen, length = 0x10;
+ int j, nbytes, linebytes;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (1 || (flag & CMD_FLAG_REPEAT) == 0) {
+ /*
+ * New command specified.
+ */
+
+ /*
+ * I2C chip address
+ */
+ chip = simple_strtoul(argv[0], NULL, 16);
+
+ /*
+ * I2C data address within the chip. This can be 1 or
+ * 2 bytes long. Some day it might be 3 bytes long :-).
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+ alen = get_alen(argv[1]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
+
+ /*
+ * If another parameter, it is the length to display.
+ * Length is the number of objects, not number of bytes.
+ */
+ if (argc > 2)
+ length = simple_strtoul(argv[2], NULL, 16);
+ }
+
+ /*
+ * Print the lines.
+ *
+ * We buffer all read data, so we can make sure data is read only
+ * once.
+ */
+ nbytes = length;
+ do {
+ unsigned char linebuf[DISP_LINE_LEN];
+ unsigned char *cp;
+
+ linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+
+ if (cros_ec_i2c_xfer(dev, chip, addr, alen, linebuf, linebytes,
+ 1))
+ puts("Error reading the chip.\n");
+ else {
+ printf("%04x:", addr);
+ cp = linebuf;
+ for (j = 0; j < linebytes; j++) {
+ printf(" %02x", *cp++);
+ addr++;
+ }
+ puts(" ");
+ cp = linebuf;
+ for (j = 0; j < linebytes; j++) {
+ if ((*cp < 0x20) || (*cp > 0x7e))
+ puts(".");
+ else
+ printf("%c", *cp);
+ cp++;
+ }
+ putc('\n');
+ }
+ nbytes -= linebytes;
+ } while (nbytes > 0);
+
+ return 0;
+}
+
+static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc,
+ char * const argv[])
+{
+ uchar chip;
+ ulong addr;
+ uint alen;
+ uchar byte;
+ int count;
+
+ if ((argc < 3) || (argc > 4))
+ return CMD_RET_USAGE;
+
+ /*
+ * Chip is always specified.
+ */
+ chip = simple_strtoul(argv[0], NULL, 16);
+
+ /*
+ * Address is always specified.
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+ alen = get_alen(argv[1]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
+
+ /*
+ * Value to write is always specified.
+ */
+ byte = simple_strtoul(argv[2], NULL, 16);
+
+ /*
+ * Optional count
+ */
+ if (argc == 4)
+ count = simple_strtoul(argv[3], NULL, 16);
+ else
+ count = 1;
+
+ while (count-- > 0) {
+ if (cros_ec_i2c_xfer(dev, chip, addr++, alen, &byte, 1, 0))
+ puts("Error writing the chip.\n");
+ /*
+ * Wait for the write to complete. The write can take
+ * up to 10mSec (we allow a little more time).
+ */
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+ udelay(11000);
+#endif
+ }
+
+ return 0;
+}
+
+/* Temporary code until we have driver model and can use the i2c command */
+static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
+ int argc, char * const argv[])
+{
+ const char *cmd;
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+ cmd = *argv++;
+ argc--;
+ if (0 == strcmp("md", cmd))
+ cros_ec_i2c_md(dev, flag, argc, argv);
+ else if (0 == strcmp("mw", cmd))
+ cros_ec_i2c_mw(dev, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
struct cros_ec_dev *dev = last_dev;
@@ -1044,7 +1547,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
printf("%s\n", id);
} else if (0 == strcmp("info", cmd)) {
- struct ec_response_cros_ec_info info;
+ struct ec_response_mkbp_info info;
if (cros_ec_info(dev, &info)) {
debug("%s: Could not read KBC info\n", __func__);
@@ -1213,10 +1716,10 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (!ret) {
/* Print versions */
printf("RO version: %1.*s\n",
- sizeof(p->version_string_ro),
+ (int)sizeof(p->version_string_ro),
p->version_string_ro);
printf("RW version: %1.*s\n",
- sizeof(p->version_string_rw),
+ (int)sizeof(p->version_string_rw),
p->version_string_rw);
printf("Firmware copy: %s\n",
(p->current_image <
@@ -1254,6 +1757,8 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
debug("%s: Could not access LDO%d\n", __func__, index);
return ret;
}
+ } else if (0 == strcmp("i2c", cmd)) {
+ ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2);
} else {
return CMD_RET_USAGE;
}
@@ -1267,7 +1772,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
U_BOOT_CMD(
- crosec, 5, 1, do_cros_ec,
+ crosec, 6, 1, do_cros_ec,
"CROS-EC utility command",
"init Re-init CROS-EC (done on startup automatically)\n"
"crosec id Read CROS-EC ID\n"
@@ -1284,6 +1789,8 @@ U_BOOT_CMD(
"crosec vbnvcontext [hexstring] Read [write] VbNvContext from EC\n"
"crosec ldo <idx> [<state>] Switch/Read LDO state\n"
"crosec test run tests on cros_ec\n"
- "crosec version Read CROS-EC version"
+ "crosec version Read CROS-EC version\n"
+ "crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n"
+ "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)"
);
#endif