summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/s3c24x0_i2c.c273
1 files changed, 139 insertions, 134 deletions
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index f0c1aa3..55c6a12 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -32,6 +32,8 @@
#elif defined(CONFIG_S3C2410)
#include <s3c2410.h>
#endif
+
+#include <asm/io.h>
#include <i2c.h>
#ifdef CONFIG_HARD_I2C
@@ -42,142 +44,139 @@
#define I2C_OK 0
#define I2C_NOK 1
#define I2C_NACK 2
-#define I2C_NOK_LA 3 /* Lost arbitration */
-#define I2C_NOK_TOUT 4 /* time out */
-
-#define I2CSTAT_BSY 0x20 /* Busy bit */
-#define I2CSTAT_NACK 0x01 /* Nack bit */
-#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
-#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
-#define I2C_MODE_MR 0x80 /* Master Receive Mode */
-#define I2C_START_STOP 0x20 /* START / STOP */
-#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
+#define I2C_NOK_LA 3 /* Lost arbitration */
+#define I2C_NOK_TOUT 4 /* time out */
-#define I2C_TIMEOUT 1 /* 1 second */
+#define I2CSTAT_BSY 0x20 /* Busy bit */
+#define I2CSTAT_NACK 0x01 /* Nack bit */
+#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
+#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
+#define I2C_MODE_MR 0x80 /* Master Receive Mode */
+#define I2C_START_STOP 0x20 /* START / STOP */
+#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
+#define I2C_TIMEOUT 1 /* 1 second */
static int GetI2CSDA(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#ifdef CONFIG_S3C2410
- return (gpio->GPEDAT & 0x8000) >> 15;
+ return (readl(&gpio->GPEDAT) & 0x8000) >> 15;
#endif
#ifdef CONFIG_S3C2400
- return (gpio->PGDAT & 0x0020) >> 5;
+ return (readl(&gpio->PGDAT) & 0x0020) >> 5;
#endif
}
#if 0
static void SetI2CSDA(int x)
{
- rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
+ rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15;
}
#endif
static void SetI2CSCL(int x)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#ifdef CONFIG_S3C2410
- gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+ writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT);
#endif
#ifdef CONFIG_S3C2400
- gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+ writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT);
#endif
}
-
-static int WaitForXfer (void)
+static int WaitForXfer(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status;
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ int i;
i = I2C_TIMEOUT * 10000;
- status = i2c->IICCON;
- while ((i > 0) && !(status & I2CCON_IRPND)) {
- udelay (100);
- status = i2c->IICCON;
+ while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) {
+ udelay(100);
i--;
}
- return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+ return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
}
-static int IsACK (void)
+static int IsACK(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
- return (!(i2c->IICSTAT & I2CSTAT_NACK));
+ return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK);
}
-static void ReadWriteByte (void)
+static void ReadWriteByte(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
- i2c->IICCON &= ~I2CCON_IRPND;
+ writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON);
}
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
ulong freq, pres = 16, div;
- int i, status;
+ int i;
/* wait for some time to give previous transfer a chance to finish */
i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
+ while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) {
+ udelay(1000);
i--;
}
- if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
+ if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
#ifdef CONFIG_S3C2410
- ulong old_gpecon = gpio->GPECON;
+ ulong old_gpecon = readl(&gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
- ulong old_gpecon = gpio->PGCON;
+ ulong old_gpecon = readl(&gpio->PGCON);
#endif
- /* bus still busy probably by (most) previously interrupted transfer */
+ /* bus still busy probably by (most) previously interrupted
+ transfer */
#ifdef CONFIG_S3C2410
/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
- gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+ writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000,
+ &gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
- gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
+ writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000,
+ &gpio->PGCON);
#endif
/* toggle I2CSCL until bus idle */
- SetI2CSCL (0);
- udelay (1000);
+ SetI2CSCL(0);
+ udelay(1000);
i = 10;
- while ((i > 0) && (GetI2CSDA () != 1)) {
- SetI2CSCL (1);
- udelay (1000);
- SetI2CSCL (0);
- udelay (1000);
+ while ((i > 0) && (GetI2CSDA() != 1)) {
+ SetI2CSCL(1);
+ udelay(1000);
+ SetI2CSCL(0);
+ udelay(1000);
i--;
}
- SetI2CSCL (1);
- udelay (1000);
+ SetI2CSCL(1);
+ udelay(1000);
/* restore pin functions */
#ifdef CONFIG_S3C2410
- gpio->GPECON = old_gpecon;
+ writel(old_gpecon, &gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
- gpio->PGCON = old_gpecon;
+ writel(old_gpecon, &gpio->PGCON);
#endif
}
/* calculate prescaler and divisor values */
- freq = get_PCLK ();
+ freq = get_PCLK();
if ((freq / pres / (16 + 1)) > speed)
/* set prescaler to 512 */
pres = 512;
@@ -188,13 +187,13 @@ void i2c_init (int speed, int slaveadd)
/* set prescaler, divisor according to freq, also set
* ACKGEN, IRQ */
- i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+ writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON);
/* init to SLAVE REVEIVE and set slaveaddr */
- i2c->IICSTAT = 0;
- i2c->IICADD = slaveadd;
+ writel(0, &i2c->IICSTAT);
+ writel(slaveadd, &i2c->IICADD);
/* program Master Transmit (and implicit STOP) */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
}
@@ -206,107 +205,109 @@ void i2c_init (int speed, int slaveadd)
* 0 we skip the address write cycle.
*/
static
-int i2c_transfer (unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[], unsigned short data_len)
+int i2c_transfer(unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[], unsigned short data_len)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status, result;
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ int i, result;
if (data == 0 || data_len == 0) {
/*Don't support data transfer of no length or to address 0 */
- printf ("i2c_transfer: bad call\n");
+ printf("i2c_transfer: bad call\n");
return I2C_NOK;
}
/* Check I2C bus idle */
i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
+ while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) {
+ udelay(1000);
i--;
}
- if (status & I2CSTAT_BSY)
+ if (readl(&i2c->IICSTAT) & I2CSTAT_BSY)
return I2C_NOK_TOUT;
- i2c->IICCON |= 0x80;
+ writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON);
result = I2C_OK;
switch (cmd_type) {
case I2C_WRITE:
if (addr && addr_len) {
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->IICSTAT);
i = 0;
while ((i < addr_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = addr[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(addr[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(data[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
} else {
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->IICSTAT);
i = 0;
while ((i < data_len) && (result = I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(data[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
}
if (result == I2C_OK)
- result = WaitForXfer ();
+ result = WaitForXfer();
/* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ ReadWriteByte();
break;
case I2C_READ:
if (addr && addr_len) {
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
- i2c->IICDS = chip;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
- if (IsACK ()) {
+ writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+ &i2c->IICSTAT);
+ result = WaitForXfer();
+ if (IsACK()) {
i = 0;
while ((i < addr_len) && (result == I2C_OK)) {
- i2c->IICDS = addr[i];
- ReadWriteByte ();
- result = WaitForXfer ();
+ writel(addr[i], &i2c->IICDS);
+ ReadWriteByte();
+ result = WaitForXfer();
i++;
}
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* resend START */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA |
- I2C_START_STOP;
- ReadWriteByte ();
- result = WaitForXfer ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA |
+ I2C_START_STOP, &i2c->IICSTAT);
+ ReadWriteByte();
+ result = WaitForXfer();
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
+ writel(readl(&i2c->IICCON)
+ & ~0x80, &i2c->IICCON);
+ ReadWriteByte();
+ result = WaitForXfer();
+ data[i] = readl(&i2c->IICDS);
i++;
}
} else {
@@ -314,21 +315,23 @@ int i2c_transfer (unsigned char cmd_type,
}
} else {
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- i2c->IICDS = chip;
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
+ writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+ &i2c->IICSTAT);
+ result = WaitForXfer();
- if (IsACK ()) {
+ if (IsACK()) {
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
+ writel(readl(&i2c->IICCON) &
+ ~0x80, &i2c->IICCON);
+ ReadWriteByte();
+ result = WaitForXfer();
+ data[i] = readl(&i2c->IICDS);
i++;
}
} else {
@@ -337,12 +340,12 @@ int i2c_transfer (unsigned char cmd_type,
}
/* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ ReadWriteByte();
break;
default:
- printf ("i2c_transfer: bad call\n");
+ printf("i2c_transfer: bad call\n");
result = I2C_NOK;
break;
}
@@ -350,7 +353,7 @@ int i2c_transfer (unsigned char cmd_type,
return (result);
}
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
{
uchar buf[1];
@@ -361,16 +364,16 @@ int i2c_probe (uchar chip)
* address was <ACK>ed (i.e. there was a chip at that address which
* drove the data line low).
*/
- return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+ return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
}
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
uchar xaddr[4];
int ret;
if (alen > 4) {
- printf ("I2C read: addr len %d not supported\n", alen);
+ printf("I2C read: addr len %d not supported\n", alen);
return 1;
}
@@ -394,23 +397,24 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) &
+ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
if ((ret =
- i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
- buffer, len)) != 0) {
- printf ("I2c read: failed %d\n", ret);
+ i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+ buffer, len)) != 0) {
+ printf("I2c read: failed %d\n", ret);
return 1;
}
return 0;
}
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
uchar xaddr[4];
if (alen > 4) {
- printf ("I2C write: addr len %d not supported\n", alen);
+ printf("I2C write: addr len %d not supported\n", alen);
return 1;
}
@@ -433,10 +437,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) &
+ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
return (i2c_transfer
(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
len) != 0);
}
-#endif /* CONFIG_HARD_I2C */
+#endif /* CONFIG_HARD_I2C */
generated by cgit v1.1 at 2024-11-22 00:46:45 +0000