diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/Makefile | 2 | ||||
-rw-r--r-- | drivers/i2c/soft_i2c.c | 104 |
2 files changed, 58 insertions, 48 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 06b211d..a885e26 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -40,13 +40,13 @@ COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o -COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o COBJS-$(CONFIG_TEGRA_I2C) += tegra_i2c.o COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o COBJS-$(CONFIG_SH_I2C) += sh_i2c.o COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o COBJS-$(CONFIG_SYS_I2C) += i2c_core.o +COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o COBJS := $(COBJS-y) diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index ae3c573..1269304 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -1,4 +1,8 @@ /* + * (C) Copyright 2009 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * Changes for multibus/multiadapter I2C support. + * * (C) Copyright 2001, 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -103,14 +107,30 @@ /* #define DEBUG_I2C */ -#ifdef DEBUG_I2C DECLARE_GLOBAL_DATA_PTR; + +#ifndef I2C_SOFT_DECLARATIONS +# if defined(CONFIG_MPC8260) +# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = \ + ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT); +# elif defined(CONFIG_8xx) +# define I2C_SOFT_DECLARATIONS volatile immap_t *immr = \ + (immap_t *)CONFIG_SYS_IMMR; +# else +# define I2C_SOFT_DECLARATIONS +# endif +#endif + +#if !defined(CONFIG_SYS_SOFT_I2C_SPEED) +#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED +#endif +#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE) +#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE #endif /*----------------------------------------------------------------------- * Definitions */ - #define RETRIES 0 #define I2C_ACK 0 /* PD_SDA level to ack a byte */ @@ -125,10 +145,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PRINTD(fmt,args...) #endif -#if defined(CONFIG_I2C_MULTI_BUS) -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0; -#endif /* CONFIG_I2C_MULTI_BUS */ - /*----------------------------------------------------------------------- * Local functions */ @@ -267,39 +283,6 @@ static int write_byte(uchar data) return(nack); /* not a nack is an ack */ } -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Functions for multiple I2C bus handling - */ -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -int i2c_set_bus_num(unsigned int bus) -{ -#if defined(CONFIG_I2C_MUX) - if (bus < CONFIG_SYS_MAX_I2C_BUS) { - i2c_bus_num = bus; - } else { - int ret; - - ret = i2x_mux_select_mux(bus); - i2c_init_board(); - if (ret == 0) - i2c_bus_num = bus; - else - return ret; - } -#else - if (bus >= CONFIG_SYS_MAX_I2C_BUS) - return -1; - i2c_bus_num = bus; -#endif - return 0; -} -#endif - /*----------------------------------------------------------------------- * if ack == I2C_ACK, ACK the byte so can continue reading, else * send I2C_NOACK to end the read. @@ -330,14 +313,10 @@ static uchar read_byte(int ack) return(data); } -/*=====================================================================*/ -/* Public Functions */ -/*=====================================================================*/ - /*----------------------------------------------------------------------- * Initialization */ -void i2c_init (int speed, int slaveaddr) +static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { #if defined(CONFIG_SYS_I2C_INIT_BOARD) /* call board specific i2c bus reset routine before accessing the */ @@ -360,7 +339,7 @@ void i2c_init (int speed, int slaveaddr) * completion of EEPROM writes since the chip stops responding until * the write completes (typically 10mSec). */ -int i2c_probe(uchar addr) +static int soft_i2c_probe(struct i2c_adapter *adap, uint8_t addr) { int rc; @@ -378,7 +357,8 @@ int i2c_probe(uchar addr) /*----------------------------------------------------------------------- * Read bytes */ -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int soft_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { int shift; PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n", @@ -452,7 +432,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) /*----------------------------------------------------------------------- * Write bytes */ -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int soft_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { int shift, failures = 0; @@ -482,3 +463,32 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) send_stop(); return(failures); } + +/* + * Register soft i2c adapters + */ +U_BOOT_I2C_ADAP_COMPLETE(soft0, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED, CONFIG_SYS_I2C_SOFT_SLAVE, + 0) +#if defined(I2C_SOFT_DECLARATIONS2) +U_BOOT_I2C_ADAP_COMPLETE(soft1, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_2, + CONFIG_SYS_I2C_SOFT_SLAVE_2, + 1) +#endif +#if defined(I2C_SOFT_DECLARATIONS3) +U_BOOT_I2C_ADAP_COMPLETE(soft2, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_3, + CONFIG_SYS_I2C_SOFT_SLAVE_3, + 2) +#endif +#if defined(I2C_SOFT_DECLARATIONS4) +U_BOOT_I2C_ADAP_COMPLETE(soft3, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_4, + CONFIG_SYS_I2C_SOFT_SLAVE_4, + 3) +#endif |