summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/fsl_i2c.c22
-rw-r--r--drivers/i2c/mxc_i2c.c8
-rw-r--r--drivers/i2c/omap1510_i2c.c4
-rw-r--r--drivers/i2c/omap24xx_i2c.c4
-rw-r--r--drivers/i2c/soft_i2c.c18
-rw-r--r--drivers/i2c/tsi108_i2c.c20
6 files changed, 38 insertions, 38 deletions
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 264553d..281a88b 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <asm/fsl_i2c.h> /* HW definitions */
-#define I2C_TIMEOUT (CFG_HZ / 4)
+#define I2C_TIMEOUT (CONFIG_SYS_HZ / 4)
#define I2C_READ_BIT 1
#define I2C_WRITE_BIT 0
@@ -38,18 +38,18 @@ DECLARE_GLOBAL_DATA_PTR;
* runs from ROM, and we can't switch buses because we can't modify
* the global variables.
*/
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#ifdef CONFIG_SYS_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
#else
static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
#endif
-static unsigned int i2c_bus_speed[2] = {CFG_I2C_SPEED, CFG_I2C_SPEED};
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
static const struct fsl_i2c *i2c_dev[2] = {
- (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
-#ifdef CFG_I2C2_OFFSET
- (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
#endif
};
@@ -176,7 +176,7 @@ i2c_init(int speed, int slaveadd)
struct fsl_i2c *dev;
unsigned int temp;
- dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+ dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
@@ -187,8 +187,8 @@ i2c_init(int speed, int slaveadd)
writeb(0x0, &dev->sr); /* clear status register */
writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
-#ifdef CFG_I2C2_OFFSET
- dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
@@ -386,7 +386,7 @@ i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
int i2c_set_bus_num(unsigned int bus)
{
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
if (bus > 1) {
#else
if (bus > 0) {
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 1f6ba1f..eedad06 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -47,14 +47,14 @@
#define I2SR_IIF (1 << 1)
#define I2SR_RX_NO_AK (1 << 0)
-#ifdef CFG_I2C_MX31_PORT1
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
#define I2C_BASE 0x43f80000
-#elif defined (CFG_I2C_MX31_PORT2)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
#define I2C_BASE 0x43f98000
-#elif defined (CFG_I2C_MX31_PORT3)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
#define I2C_BASE 0x43f84000
#else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
#endif
#ifdef DEBUG
diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
index 388951d..a4e6227 100644
--- a/drivers/i2c/omap1510_i2c.c
+++ b/drivers/i2c/omap1510_i2c.c
@@ -205,7 +205,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_read_byte (chip, addr + i, &buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
@@ -230,7 +230,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_write_byte (chip, addr + i, buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index d16cfb1..134dccb 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -252,7 +252,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_read_byte (chip, addr + i, &buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
@@ -277,7 +277,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_write_byte (chip, addr + i, buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 0a9feb6..508d3d7 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -75,7 +75,7 @@ static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
/*-----------------------------------------------------------------------
* Local functions
*/
-#if !defined(CFG_I2C_INIT_BOARD)
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
static void send_reset (void);
#endif
static void send_start (void);
@@ -84,7 +84,7 @@ static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
-#if !defined(CFG_I2C_INIT_BOARD)
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@@ -224,7 +224,7 @@ unsigned int i2c_get_bus_num(void)
int i2c_set_bus_num(unsigned int bus)
{
#if defined(CONFIG_I2C_MUX)
- if (bus < CFG_MAX_I2C_BUS) {
+ if (bus < CONFIG_SYS_MAX_I2C_BUS) {
i2c_bus_num = bus;
} else {
int ret;
@@ -236,7 +236,7 @@ int i2c_set_bus_num(unsigned int bus)
return ret;
}
#else
- if (bus >= CFG_MAX_I2C_BUS)
+ if (bus >= CONFIG_SYS_MAX_I2C_BUS)
return -1;
i2c_bus_num = bus;
#endif
@@ -246,12 +246,12 @@ int i2c_set_bus_num(unsigned int bus)
/* TODO: add 100/400k switching */
unsigned int i2c_get_bus_speed(void)
{
- return CFG_I2C_SPEED;
+ return CONFIG_SYS_I2C_SPEED;
}
int i2c_set_bus_speed(unsigned int speed)
{
- if (speed != CFG_I2C_SPEED)
+ if (speed != CONFIG_SYS_I2C_SPEED)
return -1;
return 0;
@@ -297,7 +297,7 @@ static uchar read_byte(int ack)
*/
void i2c_init (int speed, int slaveaddr)
{
-#if defined(CFG_I2C_INIT_BOARD)
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
@@ -342,7 +342,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
chip, addr, alen, buffer, len);
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -354,7 +354,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* still be one byte because the extra address bits are
* hidden in the chip address.
*/
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
chip, addr);
diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e393..fda822c 100644
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
chan_offset = TSI108_I2C_SDRAM_OFFSET;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
I2C_CNTRL2_START))) {
/* Set device address and operation (read = 0) */
temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
temp;
/* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
* (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
(I2C_CNTRL2_START);
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
) {
op_status = TSI108_I2C_SUCCESS;
- temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
chan_offset +
I2C_RD_DATA);
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
u32 op_status = TSI108_I2C_TIMEOUT_ERR;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
/* Place data into the I2C Tx Register */
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_TX_DATA) = (u32) * buffer;
/* Set device address and operation */
temp =
I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL1) = temp;
/* Issue the write command (at this moment all other parameters
* are 0 (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL2) = (I2C_CNTRL2_START);
op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &
generated by cgit v1.1 at 2024-11-25 19:15:06 +0000