diff options
Diffstat (limited to 'drivers/i2c/mv_i2c.h')
| -rw-r--r-- | drivers/i2c/mv_i2c.h | 83 |
1 files changed, 83 insertions, 0 deletions
diff --git a/drivers/i2c/mv_i2c.h b/drivers/i2c/mv_i2c.h new file mode 100644 index 0000000..41af0d9 --- /dev/null +++ b/drivers/i2c/mv_i2c.h @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2011 + * Marvell Inc, <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MV_I2C_H_ +#define _MV_I2C_H_ +extern void i2c_clk_enable(void); + +/* Shall the current transfer have a start/stop condition? */ +#define I2C_COND_NORMAL 0 +#define I2C_COND_START 1 +#define I2C_COND_STOP 2 + +/* Shall the current transfer be ack/nacked or being waited for it? */ +#define I2C_ACKNAK_WAITACK 1 +#define I2C_ACKNAK_SENDACK 2 +#define I2C_ACKNAK_SENDNAK 4 + +/* Specify who shall transfer the data (master or slave) */ +#define I2C_READ 0 +#define I2C_WRITE 1 + +#if (CONFIG_SYS_I2C_SPEED == 400000) +#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD \ + | ICR_SCLE) +#else +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) +#endif + +#define I2C_ISR_INIT 0x7FF +/* ----- Control register bits ---------------------------------------- */ + +#define ICR_START 0x1 /* start bit */ +#define ICR_STOP 0x2 /* stop bit */ +#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ +#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_MA 0x10 /* master abort */ +#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ +#define ICR_IUE 0x40 /* unit enable */ +#define ICR_GCD 0x80 /* general call disable */ +#define ICR_ITEIE 0x100 /* enable tx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ +#define ICR_BEIE 0x400 /* enable bus error ints */ +#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_SADIE 0x2000 /* slave address detected int enable */ +#define ICR_UR 0x4000 /* unit reset */ +#define ICR_FM 0x8000 /* Fast Mode */ + +/* ----- Status register bits ----------------------------------------- */ + +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ + +#endif |