summaryrefslogtreecommitdiff
path: root/drivers/i2c/fti2c010.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/fti2c010.c')
-rw-r--r--drivers/i2c/fti2c010.c368
1 files changed, 368 insertions, 0 deletions
diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c
new file mode 100644
index 0000000..ddeb941
--- /dev/null
+++ b/drivers/i2c/fti2c010.c
@@ -0,0 +1,368 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+#include "fti2c010.h"
+
+#ifndef CONFIG_HARD_I2C
+#error "fti2c010: CONFIG_HARD_I2C is not defined"
+#endif
+
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+#ifndef CONFIG_FTI2C010_FREQ
+#define CONFIG_FTI2C010_FREQ clk_get_rate("I2C")
+#endif
+
+/* command timeout */
+#define CFG_CMD_TIMEOUT 10 /* ms */
+
+/* 7-bit chip address + 1-bit read/write */
+#define I2C_RD(chip) ((((chip) << 1) & 0xff) | 1)
+#define I2C_WR(chip) (((chip) << 1) & 0xff)
+
+struct fti2c010_chip {
+ void __iomem *regs;
+ uint bus;
+ uint speed;
+};
+
+static struct fti2c010_chip chip_list[] = {
+ {
+ .bus = 0,
+ .regs = (void __iomem *)CONFIG_FTI2C010_BASE,
+ },
+#ifdef CONFIG_I2C_MULTI_BUS
+# ifdef CONFIG_FTI2C010_BASE1
+ {
+ .bus = 1,
+ .regs = (void __iomem *)CONFIG_FTI2C010_BASE1,
+ },
+# endif
+# ifdef CONFIG_FTI2C010_BASE2
+ {
+ .bus = 2,
+ .regs = (void __iomem *)CONFIG_FTI2C010_BASE2,
+ },
+# endif
+# ifdef CONFIG_FTI2C010_BASE3
+ {
+ .bus = 3,
+ .regs = (void __iomem *)CONFIG_FTI2C010_BASE3,
+ },
+# endif
+#endif /* #ifdef CONFIG_I2C_MULTI_BUS */
+};
+
+static struct fti2c010_chip *curr = chip_list;
+
+static int fti2c010_wait(uint32_t mask)
+{
+ int ret = -1;
+ uint32_t stat, ts;
+ struct fti2c010_regs *regs = curr->regs;
+
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ stat = readl(&regs->sr);
+ if ((stat & mask) == mask) {
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * u-boot I2C API
+ */
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+ if (speed || !curr->speed)
+ i2c_set_bus_speed(speed);
+
+ /* if slave mode disabled */
+ if (!slaveaddr)
+ return;
+
+ /*
+ * TODO:
+ * Implement slave mode, but is it really necessary?
+ */
+}
+
+/*
+ * Probe the given I2C chip address. Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uchar chip)
+{
+ int ret;
+ struct fti2c010_regs *regs = curr->regs;
+
+ i2c_init(0, 0);
+
+ /* 1. Select slave device (7bits Address + 1bit R/W) */
+ writel(I2C_WR(chip), &regs->dr);
+ writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+
+ /* 2. Select device register */
+ writel(0, &regs->dr);
+ writel(CR_ENABLE | CR_TBEN, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+
+ return ret;
+}
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ int ret, pos;
+ uchar paddr[4];
+ struct fti2c010_regs *regs = curr->regs;
+
+ i2c_init(0, 0);
+
+ paddr[0] = (addr >> 0) & 0xFF;
+ paddr[1] = (addr >> 8) & 0xFF;
+ paddr[2] = (addr >> 16) & 0xFF;
+ paddr[3] = (addr >> 24) & 0xFF;
+
+ /*
+ * Phase A. Set register address
+ */
+
+ /* A.1 Select slave device (7bits Address + 1bit R/W) */
+ writel(I2C_WR(chip), &regs->dr);
+ writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+
+ /* A.2 Select device register */
+ for (pos = 0; pos < alen; ++pos) {
+ uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+ writel(paddr[pos], &regs->dr);
+ writel(ctrl, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Phase B. Get register data
+ */
+
+ /* B.1 Select slave device (7bits Address + 1bit R/W) */
+ writel(I2C_RD(chip), &regs->dr);
+ writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+
+ /* B.2 Get register data */
+ for (pos = 0; pos < len; ++pos) {
+ uint32_t ctrl = CR_ENABLE | CR_TBEN;
+ uint32_t stat = SR_DR;
+
+ if (pos == len - 1) {
+ ctrl |= CR_NAK | CR_STOP;
+ stat |= SR_ACK;
+ }
+ writel(ctrl, &regs->cr);
+ ret = fti2c010_wait(stat);
+ if (ret)
+ break;
+ buf[pos] = (uchar)(readl(&regs->dr) & 0xFF);
+ }
+
+ return ret;
+}
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ int ret, pos;
+ uchar paddr[4];
+ struct fti2c010_regs *regs = curr->regs;
+
+ i2c_init(0, 0);
+
+ paddr[0] = (addr >> 0) & 0xFF;
+ paddr[1] = (addr >> 8) & 0xFF;
+ paddr[2] = (addr >> 16) & 0xFF;
+ paddr[3] = (addr >> 24) & 0xFF;
+
+ /*
+ * Phase A. Set register address
+ *
+ * A.1 Select slave device (7bits Address + 1bit R/W)
+ */
+ writel(I2C_WR(chip), &regs->dr);
+ writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+
+ /* A.2 Select device register */
+ for (pos = 0; pos < alen; ++pos) {
+ uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+ writel(paddr[pos], &regs->dr);
+ writel(ctrl, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Phase B. Set register data
+ */
+ for (pos = 0; pos < len; ++pos) {
+ uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+ if (pos == len - 1)
+ ctrl |= CR_STOP;
+ writel(buf[pos], &regs->dr);
+ writel(ctrl, &regs->cr);
+ ret = fti2c010_wait(SR_DT);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Functions for setting the current I2C bus and its speed
+ */
+#ifdef CONFIG_I2C_MULTI_BUS
+
+/*
+ * i2c_set_bus_num:
+ *
+ * Change the active I2C bus. Subsequent read/write calls will
+ * go to this one.
+ *
+ * bus - bus index, zero based
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(uint bus)
+{
+ if (bus >= ARRAY_SIZE(chip_list))
+ return -1;
+ curr = chip_list + bus;
+ i2c_init(0, 0);
+ return 0;
+}
+
+/*
+ * i2c_get_bus_num:
+ *
+ * Returns index of currently active I2C bus. Zero-based.
+ */
+
+uint i2c_get_bus_num(void)
+{
+ return curr->bus;
+}
+
+#endif /* #ifdef CONFIG_I2C_MULTI_BUS */
+
+/*
+ * i2c_set_bus_speed:
+ *
+ * Change the speed of the active I2C bus
+ *
+ * speed - bus speed in Hz
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_speed(uint speed)
+{
+ struct fti2c010_regs *regs = curr->regs;
+ uint clk = CONFIG_FTI2C010_FREQ;
+ uint gsr = 0, tsr = 32;
+ uint spd, div;
+
+ if (!speed)
+ speed = CONFIG_SYS_I2C_SPEED;
+
+ for (div = 0; div < 0x3ffff; ++div) {
+ /* SCLout = PCLK/(2*(COUNT + 2) + GSR) */
+ spd = clk / (2 * (div + 2) + gsr);
+ if (spd <= speed)
+ break;
+ }
+
+ if (curr->speed == spd)
+ return 0;
+
+ writel(CR_I2CRST, &regs->cr);
+ mdelay(100);
+ if (readl(&regs->cr) & CR_I2CRST) {
+ printf("fti2c010: reset timeout\n");
+ return -1;
+ }
+
+ curr->speed = spd;
+
+ writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), &regs->tgsr);
+ writel(CDR_DIV(div), &regs->cdr);
+
+ return 0;
+}
+
+/*
+ * i2c_get_bus_speed:
+ *
+ * Returns speed of currently active I2C bus in Hz
+ */
+
+uint i2c_get_bus_speed(void)
+{
+ return curr->speed;
+}
generated by cgit v1.1 at 2024-12-21 00:53:19 +0000