summaryrefslogtreecommitdiff
path: root/drivers/i2c/fsl_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/fsl_i2c.c')
-rw-r--r--drivers/i2c/fsl_i2c.c41
1 files changed, 34 insertions, 7 deletions
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 291ad94..aa159f8 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -423,18 +423,45 @@ fsl_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data,
struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
int i = -1; /* signal error */
u8 *a = (u8*)&addr;
+ int len = alen * -1;
if (i2c_wait4bus(adap) < 0)
return -1;
- if ((!length || alen > 0)
- && i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0
- && __i2c_write(adap, &a[4 - alen], alen) == alen)
- i = 0; /* No error so far */
+ /* To handle the need of I2C devices that require to write few bytes
+ * (more than 4 bytes of address as in the case of else part)
+ * of data before reading, Negative equivalent of length(bytes to write)
+ * is passed, but used the +ve part of len for writing data
+ */
+ if (alen < 0) {
+ /* Generate a START and send the Address and
+ * the Tx Bytes to the slave.
+ * "START: Address: Write bytes data[len]"
+ * IF part supports writing any number of bytes in contrast
+ * to the else part, which supports writing address offset
+ * of upto 4 bytes only.
+ * bytes that need to be written are passed in
+ * "data", which will eventually keep the data READ,
+ * after writing the len bytes out of it
+ */
+ if (i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0)
+ i = __i2c_write(adap, data, len);
+
+ if (i != len)
+ return -1;
- if (length &&
- i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
- i = __i2c_read(adap, data, length);
+ if (length && i2c_write_addr(adap, dev, I2C_READ_BIT, 1) != 0)
+ i = __i2c_read(adap, data, length);
+ } else {
+ if ((!length || alen > 0) &&
+ i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 &&
+ __i2c_write(adap, &a[4 - alen], alen) == alen)
+ i = 0; /* No error so far */
+
+ if (length &&
+ i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
+ i = __i2c_read(adap, data, length);
+ }
writeb(I2C_CR_MEN, &device->cr);