diff options
Diffstat (limited to 'drivers/hwmon/lm63.c')
| -rw-r--r-- | drivers/hwmon/lm63.c | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c new file mode 100644 index 0000000..03616e1 --- /dev/null +++ b/drivers/hwmon/lm63.c @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2007-2008 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * based on lm75.c by Bill Hunter + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * National LM63 Temperature Sensor + */ + +#include <common.h> +#include <i2c.h> +#include <dtt.h> + +#define DTT_I2C_DEV_CODE 0x4C /* National LM63 device */ + +#define DTT_READ_TEMP_RMT_MSB 0x01 +#define DTT_CONFIG 0x03 +#define DTT_READ_TEMP_RMT_LSB 0x10 +#define DTT_TACHLIM_LSB 0x48 +#define DTT_TACHLIM_MSB 0x49 +#define DTT_FAN_CONFIG 0x4A +#define DTT_PWM_FREQ 0x4D +#define DTT_PWM_LOOKUP_BASE 0x50 + +struct pwm_lookup_entry { + u8 temp; + u8 pwm; +}; + +/* + * Device code + */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE; /* address of lm63 is not adjustable */ + + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + return (int)data[0]; +} /* dtt_read() */ + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE; /* address of lm63 is not adjustable */ + + dlen = 1; + data[0] = (char)(val & 0xff); + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +static int _dtt_init(int sensor) +{ + int i; + int val; + + struct pwm_lookup_entry pwm_lookup[] = CONFIG_DTT_PWM_LOOKUPTABLE; + + /* + * Set PWM Frequency to 2.5% resolution + */ + val = 20; + if (dtt_write(sensor, DTT_PWM_FREQ, val) != 0) + return 1; + + /* + * Set Tachometer Limit + */ + val = CONFIG_DTT_TACH_LIMIT; + if (dtt_write(sensor, DTT_TACHLIM_LSB, val & 0xff) != 0) + return 1; + if (dtt_write(sensor, DTT_TACHLIM_MSB, (val >> 8) & 0xff) != 0) + return 1; + + /* + * Setup PWM Lookup-Table + */ + for (i = 0; i < sizeof(pwm_lookup) / sizeof(struct pwm_lookup_entry); + i++) { + int address = DTT_PWM_LOOKUP_BASE + 2 * i; + val = pwm_lookup[i].temp; + if (dtt_write(sensor, address, val) != 0) + return 1; + val = pwm_lookup[i].pwm; + if (dtt_write(sensor, address + 1, val) != 0) + return 1; + } + + /* + * Enable PWM Lookup-Table, PWM Clock 360 kHz, Tachometer Mode 2 + */ + val = 0x02; + if (dtt_write(sensor, DTT_FAN_CONFIG, val) != 0) + return 1; + + /* + * Enable Tach input + */ + val = dtt_read(sensor, DTT_CONFIG) | 0x04; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + + return 0; +} + +int dtt_get_temp(int sensor) +{ + s16 temp = (dtt_read(sensor, DTT_READ_TEMP_RMT_MSB) << 8) + | (dtt_read(sensor, DTT_READ_TEMP_RMT_LSB)); + + /* Ignore LSB for now, U-Boot only prints natural numbers */ + return temp >> 8; +} + +int dtt_init(void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i + 1); + else + printf("%s%d is %i C\n", header, i + 1, + dtt_get_temp(sensors[i])); + } + + return 0; +} |