diff options
Diffstat (limited to 'drivers/ddr/fsl/util.c')
| -rw-r--r-- | drivers/ddr/fsl/util.c | 67 |
1 files changed, 61 insertions, 6 deletions
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 58b519b..664081b 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -43,9 +43,9 @@ u32 fsl_ddr_get_version(void) * propagation, compute a suitably rounded mclk_ps to compute * a working memory controller configuration. */ -unsigned int get_memory_clk_period_ps(void) +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num) { - unsigned int data_rate = get_ddr_freq(0); + unsigned int data_rate = get_ddr_freq(ctrl_num); unsigned int result; /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ @@ -59,10 +59,10 @@ unsigned int get_memory_clk_period_ps(void) } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ -unsigned int picos_to_mclk(unsigned int picos) +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos) { unsigned long long clks, clks_rem; - unsigned long data_rate = get_ddr_freq(0); + unsigned long data_rate = get_ddr_freq(ctrl_num); /* Short circuit for zero picos */ if (!picos) @@ -88,9 +88,9 @@ unsigned int picos_to_mclk(unsigned int picos) return (unsigned int) clks; } -unsigned int mclk_to_picos(unsigned int mclk) +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk) { - return get_memory_clk_period_ps() * mclk; + return get_memory_clk_period_ps(ctrl_num) * mclk; } #ifdef CONFIG_PPC @@ -308,3 +308,58 @@ void board_add_ram_info(int use_default) { detail_board_ddr_info(); } + +#ifdef CONFIG_FSL_DDR_SYNC_REFRESH +#define DDRC_DEBUG20_INIT_DONE 0x80000000 +#define DDRC_DEBUG2_RF 0x00000040 +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl) +{ + unsigned int i; + u32 ddrc_debug20; + u32 ddrc_debug2[CONFIG_NUM_DDR_CONTROLLERS] = {}; + u32 *ddrc_debug2_p[CONFIG_NUM_DDR_CONTROLLERS] = {}; + struct ccsr_ddr __iomem *ddr; + + for (i = first_ctrl; i <= last_ctrl; i++) { + switch (i) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl = %u\n", __func__, i); + return; + } + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + ddrc_debug2_p[i] = &ddr->debug[1]; + while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) { + /* keep polling until DDRC init is done */ + udelay(100); + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + } + ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF; + } + /* + * Sync refresh + * This is put together to make sure the refresh reqeusts are sent + * closely to each other. + */ + for (i = first_ctrl; i <= last_ctrl; i++) + ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]); +} +#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */ |