summaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/clk_rk3288.c174
1 files changed, 170 insertions, 4 deletions
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
index ed39b93..ad7c34f 100644
--- a/drivers/clk/clk_rk3288.c
+++ b/drivers/clk/clk_rk3288.c
@@ -235,6 +235,124 @@ static int rkclk_configure_ddr(struct rk3288_cru *cru, struct rk3288_grf *grf,
return 0;
}
+#ifndef CONFIG_SPL_BUILD
+#define VCO_MAX_KHZ 2200000
+#define VCO_MIN_KHZ 440000
+#define FREF_MAX_KHZ 2200000
+#define FREF_MIN_KHZ 269
+
+static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div)
+{
+ uint ref_khz = OSC_HZ / 1000, nr, nf = 0;
+ uint fref_khz;
+ uint diff_khz, best_diff_khz;
+ const uint max_nr = 1 << 6, max_nf = 1 << 12, max_no = 1 << 4;
+ uint vco_khz;
+ uint no = 1;
+ uint freq_khz = freq_hz / 1000;
+
+ if (!freq_hz) {
+ printf("%s: the frequency can not be 0 Hz\n", __func__);
+ return -EINVAL;
+ }
+
+ no = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
+ if (ext_div) {
+ *ext_div = DIV_ROUND_UP(no, max_no);
+ no = DIV_ROUND_UP(no, *ext_div);
+ }
+
+ /* only even divisors (and 1) are supported */
+ if (no > 1)
+ no = DIV_ROUND_UP(no, 2) * 2;
+
+ vco_khz = freq_khz * no;
+ if (ext_div)
+ vco_khz *= *ext_div;
+
+ if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || no > max_no) {
+ printf("%s: Cannot find out a supported VCO for Frequency (%luHz).\n",
+ __func__, freq_hz);
+ return -1;
+ }
+
+ div->no = no;
+
+ best_diff_khz = vco_khz;
+ for (nr = 1; nr < max_nr && best_diff_khz; nr++) {
+ fref_khz = ref_khz / nr;
+ if (fref_khz < FREF_MIN_KHZ)
+ break;
+ if (fref_khz > FREF_MAX_KHZ)
+ continue;
+
+ nf = vco_khz / fref_khz;
+ if (nf >= max_nf)
+ continue;
+ diff_khz = vco_khz - nf * fref_khz;
+ if (nf + 1 < max_nf && diff_khz > fref_khz / 2) {
+ nf++;
+ diff_khz = fref_khz - diff_khz;
+ }
+
+ if (diff_khz >= best_diff_khz)
+ continue;
+
+ best_diff_khz = diff_khz;
+ div->nr = nr;
+ div->nf = nf;
+ }
+
+ if (best_diff_khz > 4 * 1000) {
+ printf("%s: Failed to match output frequency %lu, difference is %u Hz, exceed 4MHZ\n",
+ __func__, freq_hz, best_diff_khz * 1000);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf,
+ int periph, unsigned int rate_hz)
+{
+ struct pll_div npll_config = {0};
+ u32 lcdc_div;
+ int ret;
+
+ ret = pll_para_config(rate_hz, &npll_config, &lcdc_div);
+ if (ret)
+ return ret;
+
+ rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK << NPLL_MODE_SHIFT,
+ NPLL_MODE_SLOW << NPLL_MODE_SHIFT);
+ rkclk_set_pll(cru, CLK_NEW, &npll_config);
+
+ /* waiting for pll lock */
+ while (1) {
+ if (readl(&grf->soc_status[1]) & SOCSTS_NPLL_LOCK)
+ break;
+ udelay(1);
+ }
+
+ rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK << NPLL_MODE_SHIFT,
+ NPLL_MODE_NORMAL << NPLL_MODE_SHIFT);
+
+ /* vop dclk source clk: npll,dclk_div: 1 */
+ switch (periph) {
+ case DCLK_VOP0:
+ rk_clrsetreg(&cru->cru_clksel_con[27], 0xff << 8 | 3 << 0,
+ (lcdc_div - 1) << 8 | 2 << 0);
+ break;
+ case DCLK_VOP1:
+ rk_clrsetreg(&cru->cru_clksel_con[29], 0xff << 8 | 3 << 6,
+ (lcdc_div - 1) << 8 | 2 << 6);
+ break;
+ }
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SPL_BUILD
static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
@@ -559,6 +677,7 @@ static ulong rk3288_get_periph_rate(struct udevice *dev, int periph)
static ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate)
{
struct rk3288_clk_priv *priv = dev_get_priv(dev);
+ struct rk3288_cru *cru = priv->cru;
struct udevice *gclk;
ulong new_rate, gclk_rate;
int ret;
@@ -571,15 +690,62 @@ static ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate)
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO0:
- new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate, periph,
- rate);
+ new_rate = rockchip_mmc_set_clk(cru, gclk_rate, periph, rate);
break;
case SCLK_SPI0:
case SCLK_SPI1:
case SCLK_SPI2:
- new_rate = rockchip_spi_set_clk(priv->cru, gclk_rate, periph,
- rate);
+ new_rate = rockchip_spi_set_clk(cru, gclk_rate, periph, rate);
break;
+#ifndef CONFIG_SPL_BUILD
+ case DCLK_VOP0:
+ case DCLK_VOP1:
+ new_rate = rockchip_vop_set_clk(cru, priv->grf, periph, rate);
+ break;
+ case SCLK_EDP_24M:
+ /* clk_edp_24M source: 24M */
+ rk_setreg(&cru->cru_clksel_con[28], 1 << 15);
+
+ /* rst edp */
+ rk_setreg(&cru->cru_clksel_con[6], 1 << 15);
+ udelay(1);
+ rk_clrreg(&cru->cru_clksel_con[6], 1 << 15);
+ new_rate = rate;
+ break;
+ case ACLK_VOP0:
+ case ACLK_VOP1: {
+ u32 div;
+
+ /* vop aclk source clk: cpll */
+ div = CPLL_HZ / rate;
+ assert((div - 1 < 64) && (div * rate == CPLL_HZ));
+
+ switch (periph) {
+ case ACLK_VOP0:
+ rk_clrsetreg(&cru->cru_clksel_con[31],
+ 3 << 6 | 0x1f << 0,
+ 0 << 6 | (div - 1) << 0);
+ break;
+ case ACLK_VOP1:
+ rk_clrsetreg(&cru->cru_clksel_con[31],
+ 3 << 14 | 0x1f << 8,
+ 0 << 14 | (div - 1) << 8);
+ break;
+ }
+ new_rate = rate;
+ break;
+ }
+ case PCLK_HDMI_CTRL:
+ /* enable pclk hdmi ctrl */
+ rk_clrreg(&cru->cru_clkgate_con[16], 1 << 9);
+
+ /* software reset hdmi */
+ rk_setreg(&cru->cru_clkgate_con[7], 1 << 9);
+ udelay(1);
+ rk_clrreg(&cru->cru_clkgate_con[7], 1 << 9);
+ new_rate = rate;
+ break;
+#endif
default:
return -ENOENT;
}