summaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/ahci.c2
-rw-r--r--drivers/block/ata_piix.c30
-rw-r--r--drivers/block/ata_piix.h2
-rw-r--r--drivers/block/fsl_sata.c16
-rw-r--r--drivers/block/sata_sil3114.c4
-rw-r--r--drivers/block/sil680.c28
-rw-r--r--drivers/block/sym53c8xx.c6
-rw-r--r--drivers/block/systemace.c28
8 files changed, 58 insertions, 58 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 52fd108..2445e8c 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -676,7 +676,7 @@ void scsi_low_level_init(int busdevfunc)
linkmap = probe_ent->link_port_map;
- for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
if (((linkmap >> i) & 0x01)) {
if (ahci_port_start((u8) i)) {
printf("Can not start port %d\n", i);
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36..ec37687 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
#include <ide.h>
#include <ata.h>
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
extern int curr_device;
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@ init_sata (int dev)
iobase4 | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
- for (i = 0; i < CFG_SATA_MAXBUS; i++)
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
sata_port (&port[i].ioaddr);
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
if (!(sata_bus_probe (i))) {
port[i].port_state = 0;
printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@ init_sata (int dev)
}
}
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
u8 j, devno;
if (port[i].port_state == 0)
continue;
- for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+ for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
sata_identify (i, j);
set_Feature_cmd (i, j);
- devno = i * CFG_SATA_DEVS_PER_BUS + j;
+ devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
if ((sata_dev_desc[devno].lba > 0) &&
(sata_dev_desc[devno].blksz > 0)) {
dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@ init_sata (int dev)
init_part (&sata_dev_desc[devno]);
if (curr_device < 0)
curr_device =
- i * CFG_SATA_DEVS_PER_BUS + j;
+ i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
}
}
}
@@ -271,7 +271,7 @@ sata_bus_softreset (int num)
port[num].dev_mask = 0;
- for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
if (!(sata_devchk (&port[num].ioaddr, i))) {
PRINTF ("dev_chk failed for dev#%d\n", i);
} else {
@@ -328,7 +328,7 @@ sata_bus_softreset (int num)
void
sata_identify (int num, int dev)
{
- u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+ u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
u16 iobuf[ATA_SECT_SIZE];
u64 n_sectors = 0;
u8 mask = 0;
@@ -564,10 +564,10 @@ sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
@@ -671,10 +671,10 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the Port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
index f9f0194..11885af 100644
--- a/drivers/block/ata_piix.h
+++ b/drivers/block/ata_piix.h
@@ -88,7 +88,7 @@ int init_sata (int dev);
#endif
#ifdef DRV_DECL /*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
+struct sata_port port[CONFIG_SYS_SATA_MAXBUS];
#endif
#endif /* __ATA_PIIX_H__ */
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 55f593a..2009d1e 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -26,23 +26,23 @@
#include <fis.h>
#include "fsl_sata.h"
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
-#ifndef CFG_SATA1_FLAGS
- #define CFG_SATA1_FLAGS FLAGS_DMA
+#ifndef CONFIG_SYS_SATA1_FLAGS
+ #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#endif
-#ifndef CFG_SATA2_FLAGS
- #define CFG_SATA2_FLAGS FLAGS_DMA
+#ifndef CONFIG_SYS_SATA2_FLAGS
+ #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#endif
static struct fsl_sata_info fsl_sata_info[] = {
#ifdef CONFIG_SATA1
- {CFG_SATA1, CFG_SATA1_FLAGS},
+ {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
#else
{0, 0},
#endif
#ifdef CONFIG_SATA2
- {CFG_SATA2, CFG_SATA2_FLAGS},
+ {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
#else
{0, 0},
#endif
@@ -123,7 +123,7 @@ int init_sata(int dev)
int i;
fsl_sata_t *sata;
- if (dev < 0 || dev > (CFG_SATA_MAX_DEVICE - 1)) {
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
printf("the sata index %d is out of ranges\n\r", dev);
return -1;
}
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 8399737..351cf99 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -48,9 +48,9 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
static void msleep (int count);
static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
{
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index 052c3d3..e21fb9b 100644
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -32,25 +32,25 @@
* #define CONFIG_PCI_PNP
* NOTE it may also be necessary to define this if the default of 8 is
* incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE 0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0
*
* #define CONFIG_CMD_IDE
* #undef CONFIG_IDE_8xx_DIRECT
* #undef CONFIG_IDE_LED
* #undef CONFIG_IDE_RESET
* #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS 2 - modify to suit
- * #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR 0
- * #define CFG_ATA_IDE0_OFFSET 0
- * #define CFG_ATA_IDE1_OFFSET 0
- * #define CFG_ATA_DATA_OFFSET 0
- * #define CFG_ATA_REG_OFFSET 0
- * #define CFG_ATA_ALT_OFFSET 0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS 2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR 0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET 0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET 0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET 0
+ * #define CONFIG_SYS_ATA_REG_OFFSET 0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET 0x0004
*
* The mapping for PCI IO-space.
* NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE 0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE 0xE8000000
*/
#include <common.h>
@@ -58,7 +58,7 @@
#include <ide.h>
#include <pci.h>
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
int ide_preinit (void)
{
@@ -67,7 +67,7 @@ int ide_preinit (void)
int l;
status = 1;
- for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+ for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
ide_bus_offset[l] = -ATA_STATUS;
}
devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -77,11 +77,11 @@ int ide_preinit (void)
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
(u32 *) &ide_bus_offset[0]);
ide_bus_offset[0] &= 0xfffffff8;
- ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+ ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
(u32 *) &ide_bus_offset[1]);
ide_bus_offset[1] &= 0xfffffff8;
- ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+ ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
/* init various things - taken from the Linux driver */
/* set PIO mode */
pci_write_config_byte(devbusfn, 0x80, 0x00);
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 44e998b..0c60bf8 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -426,7 +426,7 @@ void scsi_bus_reset(void)
{
unsigned char t;
int i;
- int end = CFG_SCSI_SPIN_UP_TIME*1000;
+ int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
t=scsi_read_byte(SCNTL1);
scsi_write_byte(SCNTL1,(t | CRST));
@@ -836,10 +836,10 @@ void scsi_chip_init(void)
scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
scsi_write_byte(SCNTL1,0x00);
scsi_write_byte(SCNTL2,0x00);
-#ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
#else
- scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+ scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
#endif
scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index dfaab52..e8dff0a 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -20,7 +20,7 @@
/*
* The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * CONFIG_SYSTEMACE to turn on support, and CONFIG_SYS_SYSTEMACE_BASE
* to set the base address of the device. This code currently
* assumes that the chip is connected via a byte-wide bus.
*
@@ -47,25 +47,25 @@
/*
* The ace_readw and writew functions read/write 16bit words, but the
* offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * datasheet for the SystemACE chip. The CONFIG_SYS_SYSTEMACE_BASE is defined
* to be the base address for the chip, usually in the local
* peripheral bus.
*/
-#if (CFG_SYSTEMACE_WIDTH == 8)
+#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
#if !defined(__BIG_ENDIAN)
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
- (readb(CFG_SYSTEMACE_BASE+off+1)))
-#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
- writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
+ (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
+ writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
#else
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
- (readb(CFG_SYSTEMACE_BASE+off+1)<<8))
-#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
- writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
+ (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
+ writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
#endif
#else
-#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
#endif
/* */
@@ -120,7 +120,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
/*
* Ensure the correct bus mode (8/16 bits) gets enabled
*/
- ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+ ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
init_part(&systemace_dev);
generated by cgit v1.1 at 2024-11-16 06:40:22 +0000