diff options
Diffstat (limited to 'drivers/bios_emulator')
21 files changed, 16008 insertions, 0 deletions
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile new file mode 100644 index 0000000..ba7d436 --- /dev/null +++ b/drivers/bios_emulator/Makefile @@ -0,0 +1,30 @@ +include $(TOPDIR)/config.mk + +LIB := libatibiosemu.a + +X86DIR = ./x86emu + +OBJS = atibios.o biosemu.o besys.o bios.o \ + $(X86DIR)/decode.o \ + $(X86DIR)/ops2.o \ + $(X86DIR)/ops.o \ + $(X86DIR)/prim_ops.o \ + $(X86DIR)/sys.o \ + $(X86DIR)/debug.o + +CFLAGS += -I. -I./include -I$(X86DIR) -I$(TOPDIR)/include \ + -D__PPC__ -D__BIG_ENDIAN__ + +all: $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c new file mode 100644 index 0000000..084339c --- /dev/null +++ b/drivers/bios_emulator/atibios.c @@ -0,0 +1,340 @@ +/**************************************************************************** +* +* Video BOOT Graphics Card POST Module +* +* ======================================================================== +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1991-2004 SciTech Software, Inc. All rights reserved. +* +* This file may be distributed and/or modified under the terms of the +* GNU General Public License version 2.0 as published by the Free +* Software Foundation and appearing in the file LICENSE.GPL included +* in the packaging of this file. +* +* Licensees holding a valid Commercial License for this product from +* SciTech Software, Inc. may use this file in accordance with the +* Commercial License Agreement provided with the Software. +* +* This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING +* THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR +* PURPOSE. +* +* See http://www.scitechsoft.com/license/ for information about +* the licensing options available and how to purchase a Commercial +* License Agreement. +* +* Contact license@scitechsoft.com if any conditions of this licensing +* are not clear to you, or you have questions about licensing options. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Linux Kernel +* Developer: Kendall Bennett +* +* Description: Module to implement booting PCI/AGP controllers on the +* bus. We use the x86 real mode emulator to run the BIOS on +* graphics controllers to bring the cards up. +* +* Note that at present this module does *not* support +* multiple controllers. +* +* The orignal name of this file is warmboot.c. +* Jason ported this file to u-boot to run the ATI video card +* BIOS in u-boot. +****************************************************************************/ +#include <common.h> + +#ifdef CONFIG_BIOSEMU + +#include "biosemui.h" +#include <malloc.h> + +/* Length of the BIOS image */ +#define MAX_BIOSLEN (128 * 1024L) + +/* Define some useful types and macros */ +#define true 1 +#define false 0 + +/* Place to save PCI BAR's that we change and later restore */ +static u32 saveROMBaseAddress; +static u32 saveBaseAddress10; +static u32 saveBaseAddress14; +static u32 saveBaseAddress18; +static u32 saveBaseAddress20; + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +VGAInfo - BIOS emulator VGA info structure + +REMARKS: +This function executes the BIOS POST code on the controller. We assume that +at this stage the controller has its I/O and memory space enabled and +that all other controllers are in a disabled state. +****************************************************************************/ +static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +{ + RMREGS regs; + RMSREGS sregs; + + /* Determine the value to store in AX for BIOS POST. Per the PCI specs, + AH must contain the bus and AL must contain the devfn, encoded as + (dev << 3) | fn + */ + memset(®s, 0, sizeof(regs)); + memset(&sregs, 0, sizeof(sregs)); + regs.x.ax = ((int)PCI_BUS(pcidev) << 8) | + ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); + + /*Setup the X86 emulator for the VGA BIOS*/ + BE_setVGA(VGAInfo); + + /*Execute the BIOS POST code*/ + BE_callRealMode(0xC000, 0x0003, ®s, &sregs); + + /*Cleanup and exit*/ + BE_getVGA(VGAInfo); +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus +bar - Place to return the base address register offset to use + +RETURNS: +The address to use to map the secondary BIOS (AGP devices) + +REMARKS: +Searches all the PCI base address registers for the device looking for a +memory mapping that is large enough to hold our ROM BIOS. We usually end up +finding the framebuffer mapping (usually BAR 0x10), and we use this mapping +to map the BIOS for the device into. We use a mapping that is already +assigned to the device to ensure the memory range will be passed through +by any PCI->PCI or AGP->PCI bridge that may be present. + +NOTE: Usually this function is only used for AGP devices, but it may be + used for PCI devices that have already been POST'ed and the BIOS + ROM base address has been zero'ed out. + +NOTE: This function leaves the original memory aperture disabled by leaving + it programmed to all 1's. It must be restored to the correct value + later. +****************************************************************************/ +static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar) +{ + u32 base, size; + + for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) { + pci_read_config_dword(pcidev, *bar, &base); + if (!(base & 0x1)) { + pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF); + pci_read_config_dword(pcidev, *bar, &size); + size = ~(size & ~0xFF) + 1; + if (size >= MAX_BIOSLEN) + return base & ~0xFF; + } + } + return 0; +} + +/**************************************************************************** +REMARKS: +Some non-x86 Linux kernels map PCI relocateable I/O to values that +are above 64K, which will not work with the BIOS image that requires +the offset for the I/O ports to be a maximum of 16-bits. Ideally +someone should fix the kernel to map the I/O ports for VGA compatible +devices to a different location (or just all I/O ports since it is +unlikely you can have enough devices in the machine to use up all +64K of the I/O space - a total of more than 256 cards would be +necessary). + +Anyway to fix this we change all I/O mapped base registers and +chop off the top bits. +****************************************************************************/ +static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base) +{ + if ((*base & 0x1) && (*base > 0xFFFE)) { + *base &= 0xFFFF; + pci_write_config_dword(pcidev, reg, *base); + + } +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus + +RETURNS: +Pointers to the mapped BIOS image + +REMARKS: +Maps a pointer to the BIOS image on the graphics card on the PCI bus. +****************************************************************************/ +void *PCI_mapBIOSImage(pci_dev_t pcidev) +{ + u32 BIOSImagePhys; + int BIOSImageBAR; + u8 *BIOSImage; + + /*Save PCI BAR registers that might get changed*/ + pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress); + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10); + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18); + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); + + /*Fix up I/O base registers to less than 64K */ + if(saveBaseAddress14 != 0) + PCI_fixupIObase(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); + else + PCI_fixupIObase(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); + + /* Some cards have problems that stop us from being able to read the + BIOS image from the ROM BAR. To fix this we have to do some chipset + specific programming for different cards to solve this problem. + */ + + if ((BIOSImagePhys = PCI_findBIOSAddr(pcidev, &BIOSImageBAR)) == 0) { + printf("Find bios addr error\n"); + return NULL; + } + + BIOSImage = (u8 *) BIOSImagePhys; + + /*Change the PCI BAR registers to map it onto the bus.*/ + pci_write_config_dword(pcidev, BIOSImageBAR, 0); + pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImagePhys | 0x1); + + udelay(1); + + /*Check that the BIOS image is valid. If not fail, or return the + compiled in BIOS image if that option was enabled + */ + if (BIOSImage[0] != 0x55 || BIOSImage[1] != 0xAA || BIOSImage[2] == 0) { + return NULL; + } + + return BIOSImage; +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus + +REMARKS: +Unmaps the BIOS image for the device and restores framebuffer mappings +****************************************************************************/ +void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage) +{ + pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress); + pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10); + pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14); + pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18); + pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20); +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +VGAInfo - BIOS emulator VGA info structure + +RETURNS: +True if successfully initialised, false if not. + +REMARKS: +Loads and POST's the display controllers BIOS, directly from the BIOS +image we can extract over the PCI bus. +****************************************************************************/ +static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +{ + u32 BIOSImageLen; + uchar *mappedBIOS; + uchar *copyOfBIOS; + + /*Allocate memory to store copy of BIOS from display controller*/ + if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) { + printf("videoboot: Video ROM failed to map!\n"); + return false; + } + + BIOSImageLen = mappedBIOS[2] * 512; + + if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) { + printf("videoboot: Out of memory!\n"); + return false; + } + memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen); + + PCI_unmapBIOSImage(pcidev, mappedBIOS); + + /*Save information in VGAInfo structure*/ + VGAInfo->function = PCI_FUNC(pcidev); + VGAInfo->device = PCI_DEV(pcidev); + VGAInfo->bus = PCI_BUS(pcidev); + VGAInfo->pcidev = pcidev; + VGAInfo->BIOSImage = copyOfBIOS; + VGAInfo->BIOSImageLen = BIOSImageLen; + + /*Now execute the BIOS POST for the device*/ + if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) { + printf("videoboot: Video ROM image is invalid!\n"); + return false; + } + + PCI_doBIOSPOST(pcidev, VGAInfo); + + /*Reset the size of the BIOS image to the final size*/ + VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512; + return true; +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +pVGAInfo - Place to return VGA info structure is requested +cleanUp - True to clean up on exit, false to leave emulator active + +REMARKS: +Boots the PCI/AGP video card on the bus using the Video ROM BIOS image +and the X86 BIOS emulator module. +****************************************************************************/ +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) +{ + BE_VGAInfo *VGAInfo; + + printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n", + PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev)); + + /*Initialise the x86 BIOS emulator*/ + if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { + printf("videoboot: Out of memory!\n"); + return false; + } + memset(VGAInfo, 0, sizeof(*VGAInfo)); + BE_init(0, 65536, VGAInfo, 0); + + /*Post all the display controller BIOS'es*/ + PCI_postController(pcidev, VGAInfo); + + /*Cleanup and exit the emulator if requested. If the BIOS emulator + is needed after booting the card, we will not call BE_exit and + leave it enabled for further use (ie: VESA driver etc). + */ + if (cleanUp) { + BE_exit(); + if (VGAInfo->BIOSImage) + free(VGAInfo->BIOSImage); + free(VGAInfo); + VGAInfo = NULL; + } + /*Return VGA info pointer if the caller requested it*/ + if (pVGAInfo) + *pVGAInfo = VGAInfo; + return true; +} + +#endif diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c new file mode 100644 index 0000000..894012f --- /dev/null +++ b/drivers/bios_emulator/besys.c @@ -0,0 +1,722 @@ +/**************************************************************************** +* +* BIOS emulator and interface +* to Realmode X86 Emulator Library +* +* ======================================================================== +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin<Jason.jin@freescale.com> +* +* Copyright (C) 1991-2004 SciTech Software, Inc. All rights reserved. +* +* This file may be distributed and/or modified under the terms of the +* GNU General Public License version 2.0 as published by the Free +* Software Foundation and appearing in the file LICENSE.GPL included +* in the packaging of this file. +* +* Licensees holding a valid Commercial License for this product from +* SciTech Software, Inc. may use this file in accordance with the +* Commercial License Agreement provided with the Software. +* +* This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING +* THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR +* PURPOSE. +* +* See http://www.scitechsoft.com/license/ for information about +* the licensing options available and how to purchase a Commercial +* License Agreement. +* +* Contact license@scitechsoft.com if any conditions of this licensing +* are not clear to you, or you have questions about licensing options. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file includes BIOS emulator I/O and memory access +* functions. +* +* Jason ported this file to u-boot to run the ATI video card +* BIOS in u-boot. Removed some emulate functions such as the +* timer port access. Made all the VGA port except reading 0x3c3 +* be emulated. Seems like reading 0x3c3 should return the high +* 16 bit of the io port. +* +****************************************************************************/ + +#include "biosemui.h" + +/*------------------------- Global Variables ------------------------------*/ + +#ifndef __i386__ +static char *BE_biosDate = "08/14/99"; +static u8 BE_model = 0xFC; +static u8 BE_submodel = 0x00; +#endif + +/*----------------------------- Implementation ----------------------------*/ + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to convert + +RETURNS: +Actual memory address to read or write the data + +REMARKS: +This function converts an emulator memory address in a 32-bit range to +a real memory address that we wish to access. It handles splitting up the +memory address space appropriately to access the emulator BIOS image, video +memory and system BIOS etc. +****************************************************************************/ +static u8 *BE_memaddr(u32 addr) +{ + if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) { + return (u8*)(_BE_env.biosmem_base + addr - 0xC0000); + } else if (addr > _BE_env.biosmem_limit && addr < 0xD0000) { + DB(printf("BE_memaddr: address %#lx may be invalid!\n", addr);) + return M.mem_base; + } else if (addr >= 0xA0000 && addr <= 0xBFFFF) { + return (u8*)(_BE_env.busmem_base + addr - 0xA0000); + } +#ifdef __i386__ + else if (addr >= 0xD0000 && addr <= 0xFFFFF) { + /* We map the real System BIOS directly on real PC's */ + DB(printf("BE_memaddr: System BIOS address %#lx\n", addr);) + return _BE_env.busmem_base + addr - 0xA0000; + } +#else + else if (addr >= 0xFFFF5 && addr < 0xFFFFE) { + /* Return a faked BIOS date string for non-x86 machines */ + DB(printf("BE_memaddr - Returning BIOS date\n");) + return BE_biosDate + addr - 0xFFFF5; + } else if (addr == 0xFFFFE) { + /* Return system model identifier for non-x86 machines */ + DB(printf("BE_memaddr - Returning model\n");) + return &BE_model; + } else if (addr == 0xFFFFF) { + /* Return system submodel identifier for non-x86 machines */ + DB(printf("BE_memaddr - Returning submodel\n");) + return &BE_submodel; + } +#endif + else if (addr > M.mem_size - 1) { + HALT_SYS(); + return M.mem_base; + } + + return M.mem_base + addr; +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Byte value read from emulator memory. + +REMARKS: +Reads a byte value from the emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +u8 X86API BE_rdb(u32 addr) +{ + if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF) + return 0; + else { + u8 val = readb_le(BE_memaddr(addr)); + return val; + } +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Word value read from emulator memory. + +REMARKS: +Reads a word value from the emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +u16 X86API BE_rdw(u32 addr) +{ + if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF) + return 0; + else { + u8 *base = BE_memaddr(addr); + u16 val = readw_le(base); + return val; + } +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Long value read from emulator memory. + +REMARKS: +Reads a 32-bit value from the emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +u32 X86API BE_rdl(u32 addr) +{ + if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF) + return 0; + else { + u8 *base = BE_memaddr(addr); + u32 val = readl_le(base); + return val; + } +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a byte value to emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +void X86API BE_wrb(u32 addr, u8 val) +{ + if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) { + writeb_le(BE_memaddr(addr), val); + } +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a word value to emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +void X86API BE_wrw(u32 addr, u16 val) +{ + if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) { + u8 *base = BE_memaddr(addr); + writew_le(base, val); + + } +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a 32-bit value to emulator memory. We have three distinct memory +regions that are handled differently, which this function handles. +****************************************************************************/ +void X86API BE_wrl(u32 addr, u32 val) +{ + if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) { + u8 *base = BE_memaddr(addr); + writel_le(base, val); + } +} + +#if defined(DEBUG) || !defined(__i386__) + +/* For Non-Intel machines we may need to emulate some I/O port accesses that + * the BIOS may try to access, such as the PCI config registers. + */ + +#define IS_TIMER_PORT(port) (0x40 <= port && port <= 0x43) +#define IS_CMOS_PORT(port) (0x70 <= port && port <= 0x71) +/*#define IS_VGA_PORT(port) (_BE_env.emulateVGA && 0x3C0 <= port && port <= 0x3DA)*/ +#define IS_VGA_PORT(port) (0x3C0 <= port && port <= 0x3DA) +#define IS_PCI_PORT(port) (0xCF8 <= port && port <= 0xCFF) +#define IS_SPKR_PORT(port) (port == 0x61) + +/**************************************************************************** +PARAMETERS: +port - Port to read from +type - Type of access to perform + +REMARKS: +Performs an emulated read from the Standard VGA I/O ports. If the target +hardware does not support mapping the VGA I/O and memory (such as some +PowerPC systems), we emulate the VGA so that the BIOS will still be able to +set NonVGA display modes such as on ATI hardware. +****************************************************************************/ +static u8 VGA_inpb( + const int port) +{ + u8 val = 0xff; + + switch (port) { + case 0x3C0: + /* 3C0 has funky characteristics because it can act as either + a data register or index register depending on the state + of an internal flip flop in the hardware. Hence we have + to emulate that functionality in here. */ + if (_BE_env.flipFlop3C0 == 0) { + /* Access 3C0 as index register*/ + val = _BE_env.emu3C0; + } + else { + /* Access 3C0 as data register*/ + if (_BE_env.emu3C0 < ATT_C) + val = _BE_env.emu3C1[_BE_env.emu3C0]; + } + _BE_env.flipFlop3C0 ^= 1; + break; + case 0x3C1: + if (_BE_env.emu3C0 < ATT_C) + return _BE_env.emu3C1[_BE_env.emu3C0]; + break; + case 0x3CC: + return _BE_env.emu3C2; + case 0x3C4: + return _BE_env.emu3C4; + case 0x3C5: + if (_BE_env.emu3C4 < ATT_C) + return _BE_env.emu3C5[_BE_env.emu3C4]; + break; + case 0x3C6: + return _BE_env.emu3C6; + case 0x3C7: + return _BE_env.emu3C7; + case 0x3C8: + return _BE_env.emu3C8; + case 0x3C9: + if (_BE_env.emu3C7 < PAL_C) + return _BE_env.emu3C9[_BE_env.emu3C7++]; + break; + case 0x3CE: + return _BE_env.emu3CE; + case 0x3CF: + if (_BE_env.emu3CE < GRA_C) + return _BE_env.emu3CF[_BE_env.emu3CE]; + break; + case 0x3D4: + if (_BE_env.emu3C2 & 0x1) + return _BE_env.emu3D4; + break; + case 0x3D5: + if ((_BE_env.emu3C2 & 0x1) && (_BE_env.emu3D4 < CRT_C)) + return _BE_env.emu3D5[_BE_env.emu3D4]; + break; + case 0x3DA: + _BE_env.flipFlop3C0 = 0; + val = _BE_env.emu3DA; + _BE_env.emu3DA ^= 0x9; + break; + } + return val; +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to +type - Type of access to perform + +REMARKS: +Performs an emulated write to one of the 8253 timer registers. For now +we only emulate timer 0 which is the only timer that the BIOS code appears +to use. +****************************************************************************/ +static void VGA_outpb( + int port, + u8 val) +{ + switch (port) { + case 0x3C0: + /* 3C0 has funky characteristics because it can act as either + a data register or index register depending on the state + of an internal flip flop in the hardware. Hence we have + to emulate that functionality in here.*/ + if (_BE_env.flipFlop3C0 == 0) { + /* Access 3C0 as index register*/ + _BE_env.emu3C0 = val; + } + else { + /* Access 3C0 as data register*/ + if (_BE_env.emu3C0 < ATT_C) + _BE_env.emu3C1[_BE_env.emu3C0] = val; + } + _BE_env.flipFlop3C0 ^= 1; + break; + case 0x3C2: + _BE_env.emu3C2 = val; + break; + case 0x3C4: + _BE_env.emu3C4 = val; + break; + case 0x3C5: + if (_BE_env.emu3C4 < ATT_C) + _BE_env.emu3C5[_BE_env.emu3C4] = val; + break; + case 0x3C6: + _BE_env.emu3C6 = val; + break; + case 0x3C7: + _BE_env.emu3C7 = (int)val * 3; + break; + case 0x3C8: + _BE_env.emu3C8 = (int)val * 3; + break; + case 0x3C9: + if (_BE_env.emu3C8 < PAL_C) + _BE_env.emu3C9[_BE_env.emu3C8++] = val; + break; + case 0x3CE: + _BE_env.emu3CE = val; + break; + case 0x3CF: + if (_BE_env.emu3CE < GRA_C) + _BE_env.emu3CF[_BE_env.emu3CE] = val; + break; + case 0x3D4: + if (_BE_env.emu3C2 & 0x1) + _BE_env.emu3D4 = val; + break; + case 0x3D5: + if ((_BE_env.emu3C2 & 0x1) && (_BE_env.emu3D4 < CRT_C)) + _BE_env.emu3D5[_BE_env.emu3D4] = val; + break; + } +} + +/**************************************************************************** +PARAMETERS: +regOffset - Offset into register space for non-DWORD accesses +value - Value to write to register for PCI_WRITE_* operations +func - Function to perform (PCIAccessRegFlags) + +RETURNS: +Value read from configuration register for PCI_READ_* operations + +REMARKS: +Accesses a PCI configuration space register by decoding the value currently +stored in the _BE_env.configAddress variable and passing it through to the +portable PCI_accessReg function. +****************************************************************************/ +static u32 BE_accessReg(int regOffset, u32 value, int func) +{ +#ifdef __KERNEL__ + int function, device, bus; + u8 val8; + u16 val16; + u32 val32; + + + /* Decode the configuration register values for the register we wish to + * access + */ + regOffset += (_BE_env.configAddress & 0xFF); + function = (_BE_env.configAddress >> 8) & 0x7; + device = (_BE_env.configAddress >> 11) & 0x1F; + bus = (_BE_env.configAddress >> 16) & 0xFF; + + /* Ignore accesses to all devices other than the one we're POSTing */ + if ((function == _BE_env.vgaInfo.function) && + (device == _BE_env.vgaInfo.device) && + (bus == _BE_env.vgaInfo.bus)) { + switch (func) { + case REG_READ_BYTE: + pci_read_config_byte(_BE_env.vgaInfo.pcidev, regOffset, + &val8); + return val8; + case REG_READ_WORD: + pci_read_config_word(_BE_env.vgaInfo.pcidev, regOffset, + &val16); + return val16; + case REG_READ_DWORD: + pci_read_config_dword(_BE_env.vgaInfo.pcidev, regOffset, + &val32); + return val32; + case REG_WRITE_BYTE: + pci_write_config_byte(_BE_env.vgaInfo.pcidev, regOffset, + value); + + return 0; + case REG_WRITE_WORD: + pci_write_config_word(_BE_env.vgaInfo.pcidev, regOffset, + value); + + return 0; + case REG_WRITE_DWORD: + pci_write_config_dword(_BE_env.vgaInfo.pcidev, + regOffset, value); + + return 0; + } + } + return 0; +#else + PCIDeviceInfo pciInfo; + + pciInfo.mech1 = 1; + pciInfo.slot.i = 0; + pciInfo.slot.p.Function = (_BE_env.configAddress >> 8) & 0x7; + pciInfo.slot.p.Device = (_BE_env.configAddress >> 11) & 0x1F; + pciInfo.slot.p.Bus = (_BE_env.configAddress >> 16) & 0xFF; + pciInfo.slot.p.Enable = 1; + + /* Ignore accesses to all devices other than the one we're POSTing */ + if ((pciInfo.slot.p.Function == + _BE_env.vgaInfo.pciInfo->slot.p.Function) + && (pciInfo.slot.p.Device == _BE_env.vgaInfo.pciInfo->slot.p.Device) + && (pciInfo.slot.p.Bus == _BE_env.vgaInfo.pciInfo->slot.p.Bus)) + return PCI_accessReg((_BE_env.configAddress & 0xFF) + regOffset, + value, func, &pciInfo); + return 0; +#endif +} + +/**************************************************************************** +PARAMETERS: +port - Port to read from +type - Type of access to perform + +REMARKS: +Performs an emulated read from one of the PCI configuration space registers. +We emulate this using our PCI_accessReg function which will access the PCI +configuration space registers in a portable fashion. +****************************************************************************/ +static u32 PCI_inp(int port, int type) +{ + switch (type) { + case REG_READ_BYTE: + if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port + && port <= 0xCFF) + return BE_accessReg(port - 0xCFC, 0, REG_READ_BYTE); + break; + case REG_READ_WORD: + if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port + && port <= 0xCFF) + return BE_accessReg(port - 0xCFC, 0, REG_READ_WORD); + break; + case REG_READ_DWORD: + if (port == 0xCF8) + return _BE_env.configAddress; + else if ((_BE_env.configAddress & 0x80000000) && port == 0xCFC) + return BE_accessReg(0, 0, REG_READ_DWORD); + break; + } + return 0; +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to +type - Type of access to perform + +REMARKS: +Performs an emulated write to one of the PCI control registers. +****************************************************************************/ +static void PCI_outp(int port, u32 val, int type) +{ + switch (type) { + case REG_WRITE_BYTE: + if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port + && port <= 0xCFF) + BE_accessReg(port - 0xCFC, val, REG_WRITE_BYTE); + break; + case REG_WRITE_WORD: + if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port + && port <= 0xCFF) + BE_accessReg(port - 0xCFC, val, REG_WRITE_WORD); + break; + case REG_WRITE_DWORD: + if (port == 0xCF8) + { + _BE_env.configAddress = val & 0x80FFFFFC; + } + else if ((_BE_env.configAddress & 0x80000000) && port == 0xCFC) + BE_accessReg(0, val, REG_WRITE_DWORD); + break; + } +} + +#endif + +/**************************************************************************** +PARAMETERS: +port - Port to write to + +RETURNS: +Value read from the I/O port + +REMARKS: +Performs an emulated 8-bit read from an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +u8 X86API BE_inb(X86EMU_pioAddr port) +{ + u8 val = 0; + +#if defined(DEBUG) || !defined(__i386__) + if (IS_VGA_PORT(port)){ + /*seems reading port 0x3c3 return the high 16 bit of io port*/ + if(port == 0x3c3) + val = LOG_inpb(port); + else + val = VGA_inpb(port); + } + else if (IS_TIMER_PORT(port)) + DB(printf("Can not interept TIMER port now!\n");) + else if (IS_SPKR_PORT(port)) + DB(printf("Can not interept SPEAKER port now!\n");) + else if (IS_CMOS_PORT(port)) + DB(printf("Can not interept CMOS port now!\n");) + else if (IS_PCI_PORT(port)) + val = PCI_inp(port, REG_READ_BYTE); + else if (port < 0x100) { + DB(printf("WARN: INVALID inb.%04X -> %02X\n", (u16) port, val);) + val = LOG_inpb(port); + } else +#endif + val = LOG_inpb(port); + return val; +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to + +RETURNS: +Value read from the I/O port + +REMARKS: +Performs an emulated 16-bit read from an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +u16 X86API BE_inw(X86EMU_pioAddr port) +{ + u16 val = 0; + +#if defined(DEBUG) || !defined(__i386__) + if (IS_PCI_PORT(port)) + val = PCI_inp(port, REG_READ_WORD); + else if (port < 0x100) { + DB(printf("WARN: Maybe INVALID inw.%04X -> %04X\n", (u16) port, val);) + val = LOG_inpw(port); + } else +#endif + val = LOG_inpw(port); + return val; +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to + +RETURNS: +Value read from the I/O port + +REMARKS: +Performs an emulated 32-bit read from an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +u32 X86API BE_inl(X86EMU_pioAddr port) +{ + u32 val = 0; + +#if defined(DEBUG) || !defined(__i386__) + if (IS_PCI_PORT(port)) + val = PCI_inp(port, REG_READ_DWORD); + else if (port < 0x100) { + val = LOG_inpd(port); + } else +#endif + val = LOG_inpd(port); + return val; +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to +val - Value to write to port + +REMARKS: +Performs an emulated 8-bit write to an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +void X86API BE_outb(X86EMU_pioAddr port, u8 val) +{ +#if defined(DEBUG) || !defined(__i386__) + if (IS_VGA_PORT(port)) + VGA_outpb(port, val); + else if (IS_TIMER_PORT(port)) + DB(printf("Can not interept TIMER port now!\n");) + else if (IS_SPKR_PORT(port)) + DB(printf("Can not interept SPEAKER port now!\n");) + else if (IS_CMOS_PORT(port)) + DB(printf("Can not interept CMOS port now!\n");) + else if (IS_PCI_PORT(port)) + PCI_outp(port, val, REG_WRITE_BYTE); + else if (port < 0x100) { + DB(printf("WARN:Maybe INVALID outb.%04X <- %02X\n", (u16) port, val);) + LOG_outpb(port, val); + } else +#endif + LOG_outpb(port, val); +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to +val - Value to write to port + +REMARKS: +Performs an emulated 16-bit write to an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +void X86API BE_outw(X86EMU_pioAddr port, u16 val) +{ +#if defined(DEBUG) || !defined(__i386__) + if (IS_VGA_PORT(port)) { + VGA_outpb(port, val); + VGA_outpb(port + 1, val >> 8); + } else if (IS_PCI_PORT(port)) + PCI_outp(port, val, REG_WRITE_WORD); + else if (port < 0x100) { + DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16) port, + val);) + LOG_outpw(port, val); + } else +#endif + LOG_outpw(port, val); +} + +/**************************************************************************** +PARAMETERS: +port - Port to write to +val - Value to write to port + +REMARKS: +Performs an emulated 32-bit write to an I/O port. We handle special cases +that we need to emulate in here, and fall through to reflecting the write +through to the real hardware if we don't need to special case it. +****************************************************************************/ +void X86API BE_outl(X86EMU_pioAddr port, u32 val) +{ +#if defined(DEBUG) || !defined(__i386__) + if (IS_PCI_PORT(port)) + PCI_outp(port, val, REG_WRITE_DWORD); + else if (port < 0x100) { + DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);) + LOG_outpd(port, val); + } else +#endif + LOG_outpd(port, val); +} diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c new file mode 100644 index 0000000..ed5437e --- /dev/null +++ b/drivers/bios_emulator/bios.c @@ -0,0 +1,321 @@ +/**************************************************************************** +* +* BIOS emulator and interface +* to Realmode X86 Emulator Library +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1996-1999 SciTech Software, Inc. +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Module implementing the BIOS specific functions. +* +* Jason ported this file to u-boot to run the ATI video card +* video BIOS. +* +****************************************************************************/ + +#include "biosemui.h" + +/*----------------------------- Implementation ----------------------------*/ + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number being serviced + +REMARKS: +Handler for undefined interrupts. +****************************************************************************/ +static void X86API undefined_intr(int intno) +{ + if (BE_rdw(intno * 4 + 2) == BIOS_SEG) { + DB(printf("biosEmu: undefined interrupt %xh called!\n", intno);) + } else + X86EMU_prepareForInt(intno); +} + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number being serviced + +REMARKS: +This function handles the default system BIOS Int 10h (the default is stored +in the Int 42h vector by the system BIOS at bootup). We only need to handle +a small number of special functions used by the BIOS during POST time. +****************************************************************************/ +static void X86API int42(int intno) +{ + if (M.x86.R_AH == 0x12 && M.x86.R_BL == 0x32) { + if (M.x86.R_AL == 0) { + /* Enable CPU accesses to video memory */ + PM_outpb(0x3c2, PM_inpb(0x3cc) | (u8) 0x02); + return; + } else if (M.x86.R_AL == 1) { + /* Disable CPU accesses to video memory */ + PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8) ~ 0x02); + return; + } +#ifdef DEBUG + else { + printf("int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n", + M.x86.R_AL); + } +#endif + } +#ifdef DEBUG + else { + printf("int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n", + M.x86.R_AH, M.x86.R_AL, M.x86.R_BL); + } +#endif +} + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number being serviced + +REMARKS: +This function handles the default system BIOS Int 10h. If the POST code +has not yet re-vectored the Int 10h BIOS interrupt vector, we handle this +by simply calling the int42 interrupt handler above. Very early in the +BIOS POST process, the vector gets replaced and we simply let the real +mode interrupt handler process the interrupt. +****************************************************************************/ +static void X86API int10(int intno) +{ + if (BE_rdw(intno * 4 + 2) == BIOS_SEG) + int42(intno); + else + X86EMU_prepareForInt(intno); +} + +/* Result codes returned by the PCI BIOS */ + +#define SUCCESSFUL 0x00 +#define FUNC_NOT_SUPPORT 0x81 +#define BAD_VENDOR_ID 0x83 +#define DEVICE_NOT_FOUND 0x86 +#define BAD_REGISTER_NUMBER 0x87 +#define SET_FAILED 0x88 +#define BUFFER_TOO_SMALL 0x89 + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number being serviced + +REMARKS: +This function handles the default Int 1Ah interrupt handler for the real +mode code, which provides support for the PCI BIOS functions. Since we only +want to allow the real mode BIOS code *only* see the PCI config space for +its own device, we only return information for the specific PCI config +space that we have passed in to the init function. This solves problems +when using the BIOS to warm boot a secondary adapter when there is an +identical adapter before it on the bus (some BIOS'es get confused in this +case). +****************************************************************************/ +static void X86API int1A(int unused) +{ + u16 pciSlot; + +#ifdef __KERNEL__ + u8 interface, subclass, baseclass; + + /* Initialise the PCI slot number */ + pciSlot = ((int)_BE_env.vgaInfo.bus << 8) | + ((int)_BE_env.vgaInfo.device << 3) | (int)_BE_env.vgaInfo.function; +#else +/* Fail if no PCI device information has been registered */ + if (!_BE_env.vgaInfo.pciInfo) + return; + + pciSlot = (u16) (_BE_env.vgaInfo.pciInfo->slot.i >> 8); +#endif + switch (M.x86.R_AX) { + case 0xB101: /* PCI bios present? */ + M.x86.R_AL = 0x00; /* no config space/special cycle generation support */ + M.x86.R_EDX = 0x20494350; /* " ICP" */ + M.x86.R_BX = 0x0210; /* Version 2.10 */ + M.x86.R_CL = 0; /* Max bus number in system */ + CLEAR_FLAG(F_CF); + break; + case 0xB102: /* Find PCI device */ + M.x86.R_AH = DEVICE_NOT_FOUND; +#ifdef __KERNEL__ + if (M.x86.R_DX == _BE_env.vgaInfo.VendorID && + M.x86.R_CX == _BE_env.vgaInfo.DeviceID && M.x86.R_SI == 0) { +#else + if (M.x86.R_DX == _BE_env.vgaInfo.pciInfo->VendorID && + M.x86.R_CX == _BE_env.vgaInfo.pciInfo->DeviceID && + M.x86.R_SI == 0) { +#endif + M.x86.R_AH = SUCCESSFUL; + M.x86.R_BX = pciSlot; + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB103: /* Find PCI class code */ + M.x86.R_AH = DEVICE_NOT_FOUND; +#ifdef __KERNEL__ + pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG, + &interface); + pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE, + &subclass); + pci_read_config_byte(_BE_env.vgaInfo.pcidev, + PCI_CLASS_DEVICE + 1, &baseclass); + if (M.x86.R_CL == interface && M.x86.R_CH == subclass + && (u8) (M.x86.R_ECX >> 16) == baseclass) { +#else + if (M.x86.R_CL == _BE_env.vgaInfo.pciInfo->Interface && + M.x86.R_CH == _BE_env.vgaInfo.pciInfo->SubClass && + (u8) (M.x86.R_ECX >> 16) == + _BE_env.vgaInfo.pciInfo->BaseClass) { +#endif + M.x86.R_AH = SUCCESSFUL; + M.x86.R_BX = pciSlot; + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB108: /* Read configuration byte */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_read_config_byte(_BE_env.vgaInfo.pcidev, M.x86.R_DI, + &M.x86.R_CL); +#else + M.x86.R_CL = + (u8) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_BYTE, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB109: /* Read configuration word */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_read_config_word(_BE_env.vgaInfo.pcidev, M.x86.R_DI, + &M.x86.R_CX); +#else + M.x86.R_CX = + (u16) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_WORD, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB10A: /* Read configuration dword */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_read_config_dword(_BE_env.vgaInfo.pcidev, + M.x86.R_DI, &M.x86.R_ECX); +#else + M.x86.R_ECX = + (u32) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_DWORD, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB10B: /* Write configuration byte */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_write_config_byte(_BE_env.vgaInfo.pcidev, + M.x86.R_DI, M.x86.R_CL); +#else + PCI_accessReg(M.x86.R_DI, M.x86.R_CL, PCI_WRITE_BYTE, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB10C: /* Write configuration word */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_write_config_word(_BE_env.vgaInfo.pcidev, + M.x86.R_DI, M.x86.R_CX); +#else + PCI_accessReg(M.x86.R_DI, M.x86.R_CX, PCI_WRITE_WORD, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + case 0xB10D: /* Write configuration dword */ + M.x86.R_AH = BAD_REGISTER_NUMBER; + if (M.x86.R_BX == pciSlot) { + M.x86.R_AH = SUCCESSFUL; +#ifdef __KERNEL__ + pci_write_config_dword(_BE_env.vgaInfo.pcidev, + M.x86.R_DI, M.x86.R_ECX); +#else + PCI_accessReg(M.x86.R_DI, M.x86.R_ECX, PCI_WRITE_DWORD, + _BE_env.vgaInfo.pciInfo); +#endif + } + CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF); + break; + default: + printf("biosEmu/bios.int1a: unknown function AX=%#04x\n", + M.x86.R_AX); + } +} + +/**************************************************************************** +REMARKS: +This function initialises the BIOS emulation functions for the specific +PCI display device. We insulate the real mode BIOS from any other devices +on the bus, so that it will work correctly thinking that it is the only +device present on the bus (ie: avoiding any adapters present in from of +the device we are trying to control). +****************************************************************************/ +#define BE_constLE_32(v) ((((((v)&0xff00)>>8)|(((v)&0xff)<<8))<<16)|(((((v)&0xff000000)>>8)|(((v)&0x00ff0000)<<8))>>16)) + +void _BE_bios_init(u32 * intrTab) +{ + int i; + X86EMU_intrFuncs bios_intr_tab[256]; + + for (i = 0; i < 256; ++i) { + intrTab[i] = BE_constLE_32(BIOS_SEG << 16); + bios_intr_tab[i] = undefined_intr; + } + bios_intr_tab[0x10] = int10; + bios_intr_tab[0x1A] = int1A; + bios_intr_tab[0x42] = int42; + bios_intr_tab[0x6D] = int10; + X86EMU_setupIntrFuncs(bios_intr_tab); +} diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c new file mode 100644 index 0000000..aca594c --- /dev/null +++ b/drivers/bios_emulator/biosemu.c @@ -0,0 +1,370 @@ +/**************************************************************************** +* +* BIOS emulator and interface +* to Realmode X86 Emulator Library +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1996-1999 SciTech Software, Inc. +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Module implementing the system specific functions. This +* module is always compiled and linked in the OS depedent +* libraries, and never in a binary portable driver. +* +* Jason ported this file to u-boot to run the ATI video card BIOS +* in u-boot. Made all the video memory be emulated during the +* BIOS runing process which may affect the VGA function but the +* frambuffer function can work after run the BIOS. +* +****************************************************************************/ + +#include "biosemui.h" +#include <malloc.h> + +BE_sysEnv _BE_env = {{0}}; +static X86EMU_memFuncs _BE_mem __attribute__((section(".got2"))) = { + BE_rdb, + BE_rdw, + BE_rdl, + BE_wrb, + BE_wrw, + BE_wrl, + }; + +static X86EMU_pioFuncs _BE_pio __attribute__((section(".got2"))) = { + BE_inb, + BE_inw, + BE_inl, + BE_outb, + BE_outw, + BE_outl, + }; + +#define OFF(addr) (u16)(((addr) >> 0) & 0xffff) +#define SEG(addr) (u16)(((addr) >> 4) & 0xf000) + +/**************************************************************************** +PARAMETERS: +debugFlags - Flags to enable debugging options (debug builds only) +memSize - Amount of memory to allocate for real mode machine +info - Pointer to default VGA device information + +REMARKS: +This functions initialises the BElib, and uses the passed in +BIOS image as the BIOS that is used and emulated at 0xC0000. +****************************************************************************/ +int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared) +{ +#if !defined(__DRIVER__) && !defined(__KERNEL__) + + PM_init(); +#endif + memset(&M, 0, sizeof(M)); + if (memSize < 20480){ + printf("Emulator requires at least 20Kb of memory!\n"); + return 0; + } + + M.mem_base = (unsigned long)malloc(memSize); + + if (M.mem_base == NULL){ + printf("Biosemu:Out of memory!"); + return 0; + } + M.mem_size = memSize; + + _BE_env.emulateVGA = 0; + _BE_env.busmem_base = (unsigned long)malloc(128 * 1024); + if (_BE_env.busmem_base == NULL){ + printf("Biosemu:Out of memory!"); + return 0; + } + M.x86.debug = debugFlags; + _BE_bios_init((u32*)info->LowMem); + X86EMU_setupMemFuncs(&_BE_mem); + X86EMU_setupPioFuncs(&_BE_pio); + BE_setVGA(info); + return 1; +} + +/**************************************************************************** +PARAMETERS: +info - Pointer to VGA device information to make current + +REMARKS: +This function sets the VGA BIOS functions in the emulator to point to the +specific VGA BIOS in use. This includes swapping the BIOS interrupt +vectors, BIOS image and BIOS data area to the new BIOS. This allows the +real mode BIOS to be swapped without resetting the entire emulator. +****************************************************************************/ +void X86API BE_setVGA(BE_VGAInfo * info) +{ + +#ifdef __KERNEL__ + _BE_env.vgaInfo.function = info->function; + _BE_env.vgaInfo.device = info->device; + _BE_env.vgaInfo.bus = info->bus; + _BE_env.vgaInfo.pcidev = info->pcidev; +#else + _BE_env.vgaInfo.pciInfo = info->pciInfo; +#endif + _BE_env.vgaInfo.BIOSImage = info->BIOSImage; + if (info->BIOSImage) { + _BE_env.biosmem_base = (ulong) info->BIOSImage; + _BE_env.biosmem_limit = 0xC0000 + info->BIOSImageLen - 1; + } else { + _BE_env.biosmem_base = _BE_env.busmem_base + 0x20000; + _BE_env.biosmem_limit = 0xC7FFF; + } + if (*((u32 *) info->LowMem) == 0) + _BE_bios_init((u32 *) info->LowMem); + memcpy((u8 *) M.mem_base, info->LowMem, sizeof(info->LowMem)); +} + +/**************************************************************************** +PARAMETERS: +info - Pointer to VGA device information to retrieve current + +REMARKS: +This function returns the VGA BIOS functions currently active in the +emulator, so they can be restored at a later date. +****************************************************************************/ +void X86API BE_getVGA(BE_VGAInfo * info) +{ +#ifdef __KERNEL__ + info->function = _BE_env.vgaInfo.function; + info->device = _BE_env.vgaInfo.device; + info->bus = _BE_env.vgaInfo.bus; + info->pcidev = _BE_env.vgaInfo.pcidev; +#else + info->pciInfo = _BE_env.vgaInfo.pciInfo; +#endif + info->BIOSImage = _BE_env.vgaInfo.BIOSImage; + memcpy(info->LowMem, (u8 *) M.mem_base, sizeof(info->LowMem)); +} + +/**************************************************************************** +PARAMETERS: +r_seg - Segment for pointer to convert +r_off - Offset for pointer to convert + +REMARKS: +This function maps a real mode pointer in the emulator memory to a protected +mode pointer that can be used to directly access the memory. + +NOTE: The memory is *always* in little endian format, son on non-x86 + systems you will need to do endian translations to access this + memory. +****************************************************************************/ +void *X86API BE_mapRealPointer(uint r_seg, uint r_off) +{ + u32 addr = ((u32) r_seg << 4) + r_off; + + if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) { + return (void *)(_BE_env.biosmem_base + addr - 0xC0000); + } else if (addr >= 0xA0000 && addr <= 0xFFFFF) { + return (void *)(_BE_env.busmem_base + addr - 0xA0000); + } + return (void *)(M.mem_base + addr); +} + +/**************************************************************************** +PARAMETERS: +len - Return the length of the VESA buffer +rseg - Place to store VESA buffer segment +roff - Place to store VESA buffer offset + +REMARKS: +This function returns the address of the VESA transfer buffer in real +_BE_piomode emulator memory. The VESA transfer buffer is always 1024 bytes long, +and located at 15Kb into the start of the real mode memory (16Kb is where +we put the real mode code we execute for issuing interrupts). + +NOTE: The memory is *always* in little endian format, son on non-x86 + systems you will need to do endian translations to access this + memory. +****************************************************************************/ +void *X86API BE_getVESABuf(uint * len, uint * rseg, uint * roff) +{ + *len = 1024; + *rseg = SEG(0x03C00); + *roff = OFF(0x03C00); + return (void *)(M.mem_base + ((u32) * rseg << 4) + *roff); +} + +/**************************************************************************** +REMARKS: +Cleans up and exits the emulator. +****************************************************************************/ +void X86API BE_exit(void) +{ + free(M.mem_base); + free(_BE_env.busmem_base); +} + +/**************************************************************************** +PARAMETERS: +seg - Segment of code to call +off - Offset of code to call +regs - Real mode registers to load +sregs - Real mode segment registers to load + +REMARKS: +This functions calls a real mode far function at the specified address, +and loads all the x86 registers from the passed in registers structure. +On exit the registers returned from the call are returned in the same +structures. +****************************************************************************/ +void X86API BE_callRealMode(uint seg, uint off, RMREGS * regs, RMSREGS * sregs) +{ + M.x86.R_EAX = regs->e.eax; + M.x86.R_EBX = regs->e.ebx; + M.x86.R_ECX = regs->e.ecx; + M.x86.R_EDX = regs->e.edx; + M.x86.R_ESI = regs->e.esi; + M.x86.R_EDI = regs->e.edi; + M.x86.R_DS = sregs->ds; + M.x86.R_ES = sregs->es; + M.x86.R_FS = sregs->fs; + M.x86.R_GS = sregs->gs; + + ((u8 *) M.mem_base)[0x4000] = 0x9A; + ((u8 *) M.mem_base)[0x4001] = (u8) off; + ((u8 *) M.mem_base)[0x4002] = (u8) (off >> 8); + ((u8 *) M.mem_base)[0x4003] = (u8) seg; + ((u8 *) M.mem_base)[0x4004] = (u8) (seg >> 8); + ((u8 *) M.mem_base)[0x4005] = 0xF1; /* Illegal op-code */ + M.x86.R_CS = SEG(0x04000); + M.x86.R_IP = OFF(0x04000); + + M.x86.R_SS = SEG(M.mem_size - 2); + M.x86.R_SP = OFF(M.mem_size - 2) + 2; + + X86EMU_exec(); + + regs->e.cflag = M.x86.R_EFLG & F_CF; + regs->e.eax = M.x86.R_EAX; + regs->e.ebx = M.x86.R_EBX; + regs->e.ecx = M.x86.R_ECX; + regs->e.edx = M.x86.R_EDX; + regs->e.esi = M.x86.R_ESI; + regs->e.edi = M.x86.R_EDI; + sregs->ds = M.x86.R_DS; + sregs->es = M.x86.R_ES; + sregs->fs = M.x86.R_FS; + sregs->gs = M.x86.R_GS; +} + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number to execute +in - Real mode registers to load +out - Place to store resulting real mode registers + +REMARKS: +This functions calls a real mode interrupt function at the specified address, +and loads all the x86 registers from the passed in registers structure. +On exit the registers returned from the call are returned in out stucture. +****************************************************************************/ +int X86API BE_int86(int intno, RMREGS * in, RMREGS * out) +{ + M.x86.R_EAX = in->e.eax; + M.x86.R_EBX = in->e.ebx; + M.x86.R_ECX = in->e.ecx; + M.x86.R_EDX = in->e.edx; + M.x86.R_ESI = in->e.esi; + M.x86.R_EDI = in->e.edi; + ((u8 *) M.mem_base)[0x4000] = 0xCD; + ((u8 *) M.mem_base)[0x4001] = (u8) intno; + ((u8 *) M.mem_base)[0x4002] = 0xF1; + M.x86.R_CS = SEG(0x04000); + M.x86.R_IP = OFF(0x04000); + + M.x86.R_SS = SEG(M.mem_size - 1); + M.x86.R_SP = OFF(M.mem_size - 1) - 1; + + X86EMU_exec(); + out->e.cflag = M.x86.R_EFLG & F_CF; + out->e.eax = M.x86.R_EAX; + out->e.ebx = M.x86.R_EBX; + out->e.ecx = M.x86.R_ECX; + out->e.edx = M.x86.R_EDX; + out->e.esi = M.x86.R_ESI; + out->e.edi = M.x86.R_EDI; + return out->x.ax; +} + +/**************************************************************************** +PARAMETERS: +intno - Interrupt number to execute +in - Real mode registers to load +out - Place to store resulting real mode registers +sregs - Real mode segment registers to load + +REMARKS: +This functions calls a real mode interrupt function at the specified address, +and loads all the x86 registers from the passed in registers structure. +On exit the registers returned from the call are returned in out stucture. +****************************************************************************/ +int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out, RMSREGS * sregs) +{ + M.x86.R_EAX = in->e.eax; + M.x86.R_EBX = in->e.ebx; + M.x86.R_ECX = in->e.ecx; + M.x86.R_EDX = in->e.edx; + M.x86.R_ESI = in->e.esi; + M.x86.R_EDI = in->e.edi; + M.x86.R_DS = sregs->ds; + M.x86.R_ES = sregs->es; + M.x86.R_FS = sregs->fs; + M.x86.R_GS = sregs->gs; + ((u8 *) M.mem_base)[0x4000] = 0xCD; + ((u8 *) M.mem_base)[0x4001] = (u8) intno; + ((u8 *) M.mem_base)[0x4002] = 0xF1; + M.x86.R_CS = SEG(0x04000); + M.x86.R_IP = OFF(0x04000); + + M.x86.R_SS = SEG(M.mem_size - 1); + M.x86.R_SP = OFF(M.mem_size - 1) - 1; + + X86EMU_exec(); + out->e.cflag = M.x86.R_EFLG & F_CF; + out->e.eax = M.x86.R_EAX; + out->e.ebx = M.x86.R_EBX; + out->e.ecx = M.x86.R_ECX; + out->e.edx = M.x86.R_EDX; + out->e.esi = M.x86.R_ESI; + out->e.edi = M.x86.R_EDI; + sregs->ds = M.x86.R_DS; + sregs->es = M.x86.R_ES; + sregs->fs = M.x86.R_FS; + sregs->gs = M.x86.R_GS; + return out->x.ax; +} diff --git a/drivers/bios_emulator/biosemui.h b/drivers/bios_emulator/biosemui.h new file mode 100644 index 0000000..3265ac1 --- /dev/null +++ b/drivers/bios_emulator/biosemui.h @@ -0,0 +1,169 @@ +/**************************************************************************** +* +* BIOS emulator and interface +* to Realmode X86 Emulator Library +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1996-1999 SciTech Software, Inc. +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Internal header file for the BIOS emulator library. +* +* Jason ported this file to u-boot, Added some architecture +* related Macro. +* +****************************************************************************/ + +#ifndef __BIOSEMUI_H +#define __BIOSEMUI_H + +#include "biosemu.h" +#include <asm/io.h> +/*---------------------- Macros and type definitions ----------------------*/ + +#ifdef DEBUG +#define DB(x) x +#else +#define DB(x) do{}while(0); +#endif + +#define BIOS_SEG 0xfff0 +extern X86EMU_sysEnv _X86EMU_env; +#define M _X86EMU_env + +/* Macros to read and write values to x86 emulator memory. Memory is always + * considered to be little endian, so we use macros to do endian swapping + * where necessary. + */ + +#ifdef __BIG_ENDIAN__ +#define readb_le(base) *((u8*)(base)) +#define readw_le(base) ((u16)readb_le(base) | ((u16)readb_le((base) + 1) << 8)) +#define readl_le(base) ((u32)readb_le((base) + 0) | ((u32)readb_le((base) + 1) << 8) | \ + ((u32)readb_le((base) + 2) << 16) | ((u32)readb_le((base) + 3) << 24)) +#define writeb_le(base, v) *((u8*)(base)) = (v) +#define writew_le(base, v) writeb_le(base + 0, (v >> 0) & 0xff), \ + writeb_le(base + 1, (v >> 8) & 0xff) +#define writel_le(base, v) writeb_le(base + 0, (v >> 0) & 0xff), \ + writeb_le(base + 1, (v >> 8) & 0xff), \ + writeb_le(base + 2, (v >> 16) & 0xff), \ + writeb_le(base + 3, (v >> 24) & 0xff) +#else +#define readb_le(base) *((u8*)(base)) +#define readw_le(base) *((u16*)(base)) +#define readl_le(base) *((u32*)(base)) +#define writeb_le(base, v) *((u8*)(base)) = (v) +#define writew_le(base, v) *((u16*)(base)) = (v) +#define writel_le(base, v) *((u32*)(base)) = (v) +#endif + +/**************************************************************************** +REMARKS: +Function codes passed to the emulated I/O port functions to determine the +type of operation to perform. +****************************************************************************/ +typedef enum { + REG_READ_BYTE = 0, + REG_READ_WORD = 1, + REG_READ_DWORD = 2, + REG_WRITE_BYTE = 3, + REG_WRITE_WORD = 4, + REG_WRITE_DWORD = 5 +} RegisterFlags; + +/**************************************************************************** +REMARKS: +Function codes passed to the emulated I/O port functions to determine the +type of operation to perform. +****************************************************************************/ +typedef enum { + PORT_BYTE = 1, + PORT_WORD = 2, + PORT_DWORD = 3, +} PortInfoFlags; + +/**************************************************************************** +REMARKS: +Data structure used to describe the details for the BIOS emulator system +environment as used by the X86 emulator library. + +HEADER: +biosemu.h + +MEMBERS: +type - Type of port access (1 = byte, 2 = word, 3 = dword) +defVal - Default power on value +finalVal - Final value +****************************************************************************/ +typedef struct { + u8 type; + u32 defVal; + u32 finalVal; +} BE_portInfo; + +#define PM_inpb(port) inb(port+VIDEO_IO_OFFSET) +#define PM_inpw(port) inw(port+VIDEO_IO_OFFSET) +#define PM_inpd(port) inl(port+VIDEO_IO_OFFSET) +#define PM_outpb(port,val) outb(val,port+VIDEO_IO_OFFSET) +#define PM_outpw(port,val) outw(val,port+VIDEO_IO_OFFSET) +#define PM_outpd(port,val) outl(val,port+VIDEO_IO_OFFSET) + +#define LOG_inpb(port) PM_inpb(port) +#define LOG_inpw(port) PM_inpw(port) +#define LOG_inpd(port) PM_inpd(port) +#define LOG_outpb(port,val) PM_outpb(port,val) +#define LOG_outpw(port,val) PM_outpw(port,val) +#define LOG_outpd(port,val) PM_outpd(port,val) + +/*-------------------------- Function Prototypes --------------------------*/ + +/* bios.c */ + +void _BE_bios_init(u32 * intrTab); +void _BE_setup_funcs(void); + +/* besys.c */ +#define DEBUG_IO() (M.x86.debug & DEBUG_IO_TRACE_F) + +u8 X86API BE_rdb(u32 addr); +u16 X86API BE_rdw(u32 addr); +u32 X86API BE_rdl(u32 addr); +void X86API BE_wrb(u32 addr, u8 val); +void X86API BE_wrw(u32 addr, u16 val); +void X86API BE_wrl(u32 addr, u32 val); + +u8 X86API BE_inb(X86EMU_pioAddr port); +u16 X86API BE_inw(X86EMU_pioAddr port); +u32 X86API BE_inl(X86EMU_pioAddr port); +void X86API BE_outb(X86EMU_pioAddr port, u8 val); +void X86API BE_outw(X86EMU_pioAddr port, u16 val); +void X86API BE_outl(X86EMU_pioAddr port, u32 val); +#endif +/* __BIOSEMUI_H */ diff --git a/drivers/bios_emulator/include/biosemu.h b/drivers/bios_emulator/include/biosemu.h new file mode 100644 index 0000000..13cb317 --- /dev/null +++ b/drivers/bios_emulator/include/biosemu.h @@ -0,0 +1,392 @@ +/**************************************************************************** +* +* BIOS emulator and interface +* to Realmode X86 Emulator Library +* +* Copyright (C) 1996-1999 SciTech Software, Inc. +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for the real mode x86 BIOS emulator, which is +* used to warmboot any number of VGA compatible PCI/AGP +* controllers under any OS, on any processor family that +* supports PCI. We also allow the user application to call +* real mode BIOS functions and Int 10h functions (including +* the VESA BIOS). +* +****************************************************************************/ + +#ifndef __BIOSEMU_H +#define __BIOSEMU_H + +#ifdef __KERNEL__ +#include "x86emu.h" +#else +#include "x86emu.h" +#include "pmapi.h" +#include "pcilib.h" +#endif + +/*---------------------- Macros and type definitions ----------------------*/ + +#pragma pack(1) + +#ifndef __KERNEL__ +/**************************************************************************** +REMARKS: +Data structure used to describe the details specific to a particular VGA +controller. This information is used to allow the VGA controller to be +swapped on the fly within the BIOS emulator. + +HEADER: +biosemu.h + +MEMBERS: +pciInfo - PCI device information block for the controller +BIOSImage - Pointer to a read/write copy of the BIOS image +BIOSImageLen - Length of the BIOS image +LowMem - Copy of key low memory areas +****************************************************************************/ +typedef struct { + PCIDeviceInfo *pciInfo; + void *BIOSImage; + ulong BIOSImageLen; + uchar LowMem[1536]; +} BE_VGAInfo; +#else +/**************************************************************************** +REMARKS: +Data structure used to describe the details for the BIOS emulator system +environment as used by the X86 emulator library. + +HEADER: +biosemu.h + +MEMBERS: +vgaInfo - VGA BIOS information structure +biosmem_base - Base of the BIOS image +biosmem_limit - Limit of the BIOS image +busmem_base - Base of the VGA bus memory +****************************************************************************/ +typedef struct { + int function; + int device; + int bus; + u32 VendorID; + u32 DeviceID; + pci_dev_t pcidev; + void *BIOSImage; + u32 BIOSImageLen; + u8 LowMem[1536]; +} BE_VGAInfo; + +#endif /* __KERNEL__ */ + +#define CRT_C 24 /* 24 CRT Controller Registers */ +#define ATT_C 21 /* 21 Attribute Controller Registers */ +#define GRA_C 9 /* 9 Graphics Controller Registers */ +#define SEQ_C 5 /* 5 Sequencer Registers */ +#define PAL_C 768 /* 768 Palette Registers */ + +/**************************************************************************** +REMARKS: +Data structure used to describe the details for the BIOS emulator system +environment as used by the X86 emulator library. + +HEADER: +biosemu.h + +MEMBERS: +vgaInfo - VGA BIOS information structure +biosmem_base - Base of the BIOS image +biosmem_limit - Limit of the BIOS image +busmem_base - Base of the VGA bus memory +timer - Timer used to emulate PC timer ports +timer0 - Latched value for timer 0 +timer0Latched - True if timer 0 value was just latched +timer2 - Current value for timer 2 +emulateVGA - True to emulate VGA I/O and memory accesses +****************************************************************************/ + +typedef struct { + BE_VGAInfo vgaInfo; + ulong biosmem_base; + ulong biosmem_limit; + ulong busmem_base; + + u32 timer0; + int timer0Latched; + u32 timer1; + int timer1Latched; + u32 timer2; + int timer2Latched; + + int emulateVGA; + u8 emu61; + u8 emu70; + int flipFlop3C0; + u32 configAddress; + u8 emu3C0; + u8 emu3C1[ATT_C]; + u8 emu3C2; + u8 emu3C4; + u8 emu3C5[SEQ_C]; + u8 emu3C6; + uint emu3C7; + uint emu3C8; + u8 emu3C9[PAL_C]; + u8 emu3CE; + u8 emu3CF[GRA_C]; + u8 emu3D4; + u8 emu3D5[CRT_C]; + u8 emu3DA; + +} BE_sysEnv; + +#ifdef __KERNEL__ + +/* Define some types when compiling for the Linux kernel that normally + * come from the SciTech PM library. + */ + +/**************************************************************************** +REMARKS: +Structure describing the 32-bit extended x86 CPU registers + +HEADER: +pmapi.h + +MEMBERS: +eax - Value of the EAX register +ebx - Value of the EBX register +ecx - Value of the ECX register +edx - Value of the EDX register +esi - Value of the ESI register +edi - Value of the EDI register +cflag - Value of the carry flag +****************************************************************************/ +typedef struct { + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 esi; + u32 edi; + u32 cflag; +} RMDWORDREGS; + +/**************************************************************************** +REMARKS: +Structure describing the 16-bit x86 CPU registers + +HEADER: +pmapi.h + +MEMBERS: +ax - Value of the AX register +bx - Value of the BX register +cx - Value of the CX register +dx - Value of the DX register +si - Value of the SI register +di - Value of the DI register +cflag - Value of the carry flag +****************************************************************************/ +#ifdef __BIG_ENDIAN__ +typedef struct { + u16 ax_hi, ax; + u16 bx_hi, bx; + u16 cx_hi, cx; + u16 dx_hi, dx; + u16 si_hi, si; + u16 di_hi, di; + u16 cflag_hi, cflag; +} RMWORDREGS; +#else +typedef struct { + u16 ax, ax_hi; + u16 bx, bx_hi; + u16 cx, cx_hi; + u16 dx, dx_hi; + u16 si, si_hi; + u16 di, di_hi; + u16 cflag, cflag_hi; +} RMWORDREGS; +#endif + +/**************************************************************************** +REMARKS: +Structure describing the 8-bit x86 CPU registers + +HEADER: +pmapi.h + +MEMBERS: +al - Value of the AL register +ah - Value of the AH register +bl - Value of the BL register +bh - Value of the BH register +cl - Value of the CL register +ch - Value of the CH register +dl - Value of the DL register +dh - Value of the DH register +****************************************************************************/ +#ifdef __BIG_ENDIAN__ +typedef struct { + u16 ax_hi; + u8 ah, al; + u16 bx_hi; + u8 bh, bl; + u16 cx_hi; + u8 ch, cl; + u16 dx_hi; + u8 dh, dl; +} RMBYTEREGS; +#else +typedef struct { + u8 al; + u8 ah; + u16 ax_hi; + u8 bl; + u8 bh; + u16 bx_hi; + u8 cl; + u8 ch; + u16 cx_hi; + u8 dl; + u8 dh; + u16 dx_hi; +} RMBYTEREGS; +#endif + +/**************************************************************************** +REMARKS: +Structure describing all the x86 CPU registers + +HEADER: +pmapi.h + +MEMBERS: +e - Member to access registers as 32-bit values +x - Member to access registers as 16-bit values +h - Member to access registers as 8-bit values +****************************************************************************/ +typedef union { + RMDWORDREGS e; + RMWORDREGS x; + RMBYTEREGS h; +} RMREGS; + +/**************************************************************************** +REMARKS: +Structure describing all the x86 segment registers + +HEADER: +pmapi.h + +MEMBERS: +es - ES segment register +cs - CS segment register +ss - SS segment register +ds - DS segment register +fs - FS segment register +gs - GS segment register +****************************************************************************/ +typedef struct { + u16 es; + u16 cs; + u16 ss; + u16 ds; + u16 fs; + u16 gs; +} RMSREGS; + +#endif /* __KERNEL__ */ + +#ifndef __KERNEL__ + +/**************************************************************************** +REMARKS: +Structure defining all the BIOS Emulator API functions as exported from +the Binary Portable DLL. +{secret} +****************************************************************************/ +typedef struct { + ulong dwSize; + ibool(PMAPIP BE_init) (u32 debugFlags, int memSize, BE_VGAInfo * info); + void (PMAPIP BE_setVGA) (BE_VGAInfo * info); + void (PMAPIP BE_getVGA) (BE_VGAInfo * info); + void *(PMAPIP BE_mapRealPointer) (uint r_seg, uint r_off); + void *(PMAPIP BE_getVESABuf) (uint * len, uint * rseg, uint * roff); + void (PMAPIP BE_callRealMode) (uint seg, uint off, RMREGS * regs, + RMSREGS * sregs); + int (PMAPIP BE_int86) (int intno, RMREGS * in, RMREGS * out); + int (PMAPIP BE_int86x) (int intno, RMREGS * in, RMREGS * out, + RMSREGS * sregs); + void *reserved1; + void (PMAPIP BE_exit) (void); +} BE_exports; + +/**************************************************************************** +REMARKS: +Function pointer type for the Binary Portable DLL initialisation entry point. +{secret} +****************************************************************************/ +typedef BE_exports *(PMAPIP BE_initLibrary_t) (PM_imports * PMImp); +#endif + +#pragma pack() + +/*---------------------------- Global variables ---------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + +/* {secret} Global BIOS emulator system environment */ + extern BE_sysEnv _BE_env; + +/*-------------------------- Function Prototypes --------------------------*/ + +/* BIOS emulator library entry points */ + int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, + int shared); + void X86API BE_setVGA(BE_VGAInfo * info); + void X86API BE_getVGA(BE_VGAInfo * info); + void X86API BE_setDebugFlags(u32 debugFlags); + void *X86API BE_mapRealPointer(uint r_seg, uint r_off); + void *X86API BE_getVESABuf(uint * len, uint * rseg, uint * roff); + void X86API BE_callRealMode(uint seg, uint off, RMREGS * regs, + RMSREGS * sregs); + int X86API BE_int86(int intno, RMREGS * in, RMREGS * out); + int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out, + RMSREGS * sregs); + void X86API BE_exit(void); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif +#endif /* __BIOSEMU_H */ diff --git a/drivers/bios_emulator/include/x86emu.h b/drivers/bios_emulator/include/x86emu.h new file mode 100644 index 0000000..6004beb --- /dev/null +++ b/drivers/bios_emulator/include/x86emu.h @@ -0,0 +1,191 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1996-1999 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for public specific functions. +* Any application linking against us should only +* include this header +* +****************************************************************************/ + +#ifndef __X86EMU_X86EMU_H +#define __X86EMU_X86EMU_H + +#include <asm/types.h> +#include <common.h> +#include <pci.h> +#include <asm/io.h> +#define X86API +#define X86APIP * +typedef u16 X86EMU_pioAddr; + +#include "x86emu/regs.h" + +/*---------------------- Macros and type definitions ----------------------*/ + +#pragma pack(1) + +/**************************************************************************** +REMARKS: +Data structure containing ponters to programmed I/O functions used by the +emulator. This is used so that the user program can hook all programmed +I/O for the emulator to handled as necessary by the user program. By +default the emulator contains simple functions that do not do access the +hardware in any way. To allow the emualtor access the hardware, you will +need to override the programmed I/O functions using the X86EMU_setupPioFuncs +function. + +HEADER: +x86emu.h + +MEMBERS: +inb - Function to read a byte from an I/O port +inw - Function to read a word from an I/O port +inl - Function to read a dword from an I/O port +outb - Function to write a byte to an I/O port +outw - Function to write a word to an I/O port +outl - Function to write a dword to an I/O port +****************************************************************************/ +typedef struct { + u8(X86APIP inb) (X86EMU_pioAddr addr); + u16(X86APIP inw) (X86EMU_pioAddr addr); + u32(X86APIP inl) (X86EMU_pioAddr addr); + void (X86APIP outb) (X86EMU_pioAddr addr, u8 val); + void (X86APIP outw) (X86EMU_pioAddr addr, u16 val); + void (X86APIP outl) (X86EMU_pioAddr addr, u32 val); +} X86EMU_pioFuncs; + +/**************************************************************************** +REMARKS: +Data structure containing ponters to memory access functions used by the +emulator. This is used so that the user program can hook all memory +access functions as necessary for the emulator. By default the emulator +contains simple functions that only access the internal memory of the +emulator. If you need specialised functions to handle access to different +types of memory (ie: hardware framebuffer accesses and BIOS memory access +etc), you will need to override this using the X86EMU_setupMemFuncs +function. + +HEADER: +x86emu.h + +MEMBERS: +rdb - Function to read a byte from an address +rdw - Function to read a word from an address +rdl - Function to read a dword from an address +wrb - Function to write a byte to an address +wrw - Function to write a word to an address +wrl - Function to write a dword to an address +****************************************************************************/ +typedef struct { + u8(X86APIP rdb) (u32 addr); + u16(X86APIP rdw) (u32 addr); + u32(X86APIP rdl) (u32 addr); + void (X86APIP wrb) (u32 addr, u8 val); + void (X86APIP wrw) (u32 addr, u16 val); + void (X86APIP wrl) (u32 addr, u32 val); +} X86EMU_memFuncs; + +/**************************************************************************** + Here are the default memory read and write + function in case they are needed as fallbacks. +***************************************************************************/ +extern u8 X86API rdb(u32 addr); +extern u16 X86API rdw(u32 addr); +extern u32 X86API rdl(u32 addr); +extern void X86API wrb(u32 addr, u8 val); +extern void X86API wrw(u32 addr, u16 val); +extern void X86API wrl(u32 addr, u32 val); + +#pragma pack() + +/*--------------------- type definitions -----------------------------------*/ + +typedef void (X86APIP X86EMU_intrFuncs) (int num); +extern X86EMU_intrFuncs _X86EMU_intrTab[256]; + +/*-------------------------- Function Prototypes --------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + + void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs); + void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs); + void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]); + void X86EMU_prepareForInt(int num); + +/* decode.c */ + + void X86EMU_exec(void); + void X86EMU_halt_sys(void); + +#ifdef DEBUG +#define HALT_SYS() \ + printf("halt_sys: file %s, line %d\n", __FILE__, __LINE__), \ + X86EMU_halt_sys() +#else +#define HALT_SYS() X86EMU_halt_sys() +#endif + +/* Debug options */ + +#define DEBUG_DECODE_F 0x0001 /* print decoded instruction */ +#define DEBUG_TRACE_F 0x0002 /* dump regs before/after execution */ +#define DEBUG_STEP_F 0x0004 +#define DEBUG_DISASSEMBLE_F 0x0008 +#define DEBUG_BREAK_F 0x0010 +#define DEBUG_SVC_F 0x0020 +#define DEBUG_SAVE_CS_IP 0x0040 +#define DEBUG_FS_F 0x0080 +#define DEBUG_PROC_F 0x0100 +#define DEBUG_SYSINT_F 0x0200 /* bios system interrupts. */ +#define DEBUG_TRACECALL_F 0x0400 +#define DEBUG_INSTRUMENT_F 0x0800 +#define DEBUG_MEM_TRACE_F 0x1000 +#define DEBUG_IO_TRACE_F 0x2000 +#define DEBUG_TRACECALL_REGS_F 0x4000 +#define DEBUG_DECODE_NOPRINT_F 0x8000 +#define DEBUG_EXIT 0x10000 +#define DEBUG_SYS_F (DEBUG_SVC_F|DEBUG_FS_F|DEBUG_PROC_F) + + void X86EMU_trace_regs(void); + void X86EMU_trace_xregs(void); + void X86EMU_dump_memory(u16 seg, u16 off, u32 amt); + int X86EMU_trace_on(void); + int X86EMU_trace_off(void); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif +#endif /* __X86EMU_X86EMU_H */ diff --git a/drivers/bios_emulator/include/x86emu/debug.h b/drivers/bios_emulator/include/x86emu/debug.h new file mode 100644 index 0000000..35e1e9a --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/debug.h @@ -0,0 +1,209 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for debug definitions. +* +****************************************************************************/ + +#ifndef __X86EMU_DEBUG_H +#define __X86EMU_DEBUG_H + +/*---------------------- Macros and type definitions ----------------------*/ + +/* checks to be enabled for "runtime" */ + +#define CHECK_IP_FETCH_F 0x1 +#define CHECK_SP_ACCESS_F 0x2 +#define CHECK_MEM_ACCESS_F 0x4 /*using regular linear pointer */ +#define CHECK_DATA_ACCESS_F 0x8 /*using segment:offset */ + +#ifdef DEBUG +# define CHECK_IP_FETCH() (M.x86.check & CHECK_IP_FETCH_F) +# define CHECK_SP_ACCESS() (M.x86.check & CHECK_SP_ACCESS_F) +# define CHECK_MEM_ACCESS() (M.x86.check & CHECK_MEM_ACCESS_F) +# define CHECK_DATA_ACCESS() (M.x86.check & CHECK_DATA_ACCESS_F) +#else +# define CHECK_IP_FETCH() +# define CHECK_SP_ACCESS() +# define CHECK_MEM_ACCESS() +# define CHECK_DATA_ACCESS() +#endif + +#ifdef DEBUG +# define DEBUG_INSTRUMENT() (M.x86.debug & DEBUG_INSTRUMENT_F) +# define DEBUG_DECODE() (M.x86.debug & DEBUG_DECODE_F) +# define DEBUG_TRACE() (M.x86.debug & DEBUG_TRACE_F) +# define DEBUG_STEP() (M.x86.debug & DEBUG_STEP_F) +# define DEBUG_DISASSEMBLE() (M.x86.debug & DEBUG_DISASSEMBLE_F) +# define DEBUG_BREAK() (M.x86.debug & DEBUG_BREAK_F) +# define DEBUG_SVC() (M.x86.debug & DEBUG_SVC_F) +# define DEBUG_SAVE_IP_CS() (M.x86.debug & DEBUG_SAVE_CS_IP) + +# define DEBUG_FS() (M.x86.debug & DEBUG_FS_F) +# define DEBUG_PROC() (M.x86.debug & DEBUG_PROC_F) +# define DEBUG_SYSINT() (M.x86.debug & DEBUG_SYSINT_F) +# define DEBUG_TRACECALL() (M.x86.debug & DEBUG_TRACECALL_F) +# define DEBUG_TRACECALLREGS() (M.x86.debug & DEBUG_TRACECALL_REGS_F) +# define DEBUG_SYS() (M.x86.debug & DEBUG_SYS_F) +# define DEBUG_MEM_TRACE() (M.x86.debug & DEBUG_MEM_TRACE_F) +# define DEBUG_IO_TRACE() (M.x86.debug & DEBUG_IO_TRACE_F) +# define DEBUG_DECODE_NOPRINT() (M.x86.debug & DEBUG_DECODE_NOPRINT_F) +#else +# define DEBUG_INSTRUMENT() 0 +# define DEBUG_DECODE() 0 +# define DEBUG_TRACE() 0 +# define DEBUG_STEP() 0 +# define DEBUG_DISASSEMBLE() 0 +# define DEBUG_BREAK() 0 +# define DEBUG_SVC() 0 +# define DEBUG_SAVE_IP_CS() 0 +# define DEBUG_FS() 0 +# define DEBUG_PROC() 0 +# define DEBUG_SYSINT() 0 +# define DEBUG_TRACECALL() 0 +# define DEBUG_TRACECALLREGS() 0 +# define DEBUG_SYS() 0 +# define DEBUG_MEM_TRACE() 0 +# define DEBUG_IO_TRACE() 0 +# define DEBUG_DECODE_NOPRINT() 0 +#endif + +#ifdef DEBUG + +# define DECODE_PRINTF(x) if (DEBUG_DECODE()) \ + x86emu_decode_printf(x) +# define DECODE_PRINTF2(x,y) if (DEBUG_DECODE()) \ + x86emu_decode_printf2(x,y) + +/* + * The following allow us to look at the bytes of an instruction. The + * first INCR_INSTRN_LEN, is called everytime bytes are consumed in + * the decoding process. The SAVE_IP_CS is called initially when the + * major opcode of the instruction is accessed. + */ +#define INC_DECODED_INST_LEN(x) \ + if (DEBUG_DECODE()) \ + x86emu_inc_decoded_inst_len(x) + +#define SAVE_IP_CS(x,y) \ + if (DEBUG_DECODE() | DEBUG_TRACECALL() | DEBUG_BREAK() \ + | DEBUG_IO_TRACE() | DEBUG_SAVE_IP_CS()) { \ + M.x86.saved_cs = x; \ + M.x86.saved_ip = y; \ + } +#else +# define INC_DECODED_INST_LEN(x) +# define DECODE_PRINTF(x) +# define DECODE_PRINTF2(x,y) +# define SAVE_IP_CS(x,y) +#endif + +#ifdef DEBUG +#define TRACE_REGS() \ + if (DEBUG_DISASSEMBLE()) { \ + x86emu_just_disassemble(); \ + goto EndOfTheInstructionProcedure; \ + } \ + if (DEBUG_TRACE() || DEBUG_DECODE()) X86EMU_trace_regs() +#else +# define TRACE_REGS() +#endif + +#ifdef DEBUG +# define SINGLE_STEP() if (DEBUG_STEP()) x86emu_single_step() +#else +# define SINGLE_STEP() +#endif + +#define TRACE_AND_STEP() \ + TRACE_REGS(); \ + SINGLE_STEP() + +#ifdef DEBUG +# define START_OF_INSTR() +# define END_OF_INSTR() EndOfTheInstructionProcedure: x86emu_end_instr(); +# define END_OF_INSTR_NO_TRACE() x86emu_end_instr(); +#else +# define START_OF_INSTR() +# define END_OF_INSTR() +# define END_OF_INSTR_NO_TRACE() +#endif + +#ifdef DEBUG +# define CALL_TRACE(u,v,w,x,s) \ + if (DEBUG_TRACECALLREGS()) \ + x86emu_dump_regs(); \ + if (DEBUG_TRACECALL()) \ + printk("%04x:%04x: CALL %s%04x:%04x\n", u , v, s, w, x); +# define RETURN_TRACE(n,u,v) \ + if (DEBUG_TRACECALLREGS()) \ + x86emu_dump_regs(); \ + if (DEBUG_TRACECALL()) \ + printk("%04x:%04x: %s\n",u,v,n); +#else +# define CALL_TRACE(u,v,w,x,s) +# define RETURN_TRACE(n,u,v) +#endif + +#ifdef DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +/*-------------------------- Function Prototypes --------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + + extern void x86emu_inc_decoded_inst_len(int x); + extern void x86emu_decode_printf(char *x); + extern void x86emu_decode_printf2(char *x, int y); + extern void x86emu_just_disassemble(void); + extern void x86emu_single_step(void); + extern void x86emu_end_instr(void); + extern void x86emu_dump_regs(void); + extern void x86emu_dump_xregs(void); + extern void x86emu_print_int_vect(u16 iv); + extern void x86emu_instrument_instruction(void); + extern void x86emu_check_ip_access(void); + extern void x86emu_check_sp_access(void); + extern void x86emu_check_mem_access(u32 p); + extern void x86emu_check_data_access(uint s, uint o); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif +#endif /* __X86EMU_DEBUG_H */ diff --git a/drivers/bios_emulator/include/x86emu/decode.h b/drivers/bios_emulator/include/x86emu/decode.h new file mode 100644 index 0000000..77769f0 --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/decode.h @@ -0,0 +1,88 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for instruction decoding logic. +* +****************************************************************************/ + +#ifndef __X86EMU_DECODE_H +#define __X86EMU_DECODE_H + +/*---------------------- Macros and type definitions ----------------------*/ + +/* Instruction Decoding Stuff */ + +#define FETCH_DECODE_MODRM(mod,rh,rl) fetch_decode_modrm(&mod,&rh,&rl) +#define DECODE_RM_BYTE_REGISTER(r) decode_rm_byte_register(r) +#define DECODE_RM_WORD_REGISTER(r) decode_rm_word_register(r) +#define DECODE_RM_LONG_REGISTER(r) decode_rm_long_register(r) +#define DECODE_CLEAR_SEGOVR() M.x86.mode &= ~SYSMODE_CLRMASK + +/*-------------------------- Function Prototypes --------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + +void x86emu_intr_raise (u8 type); +void fetch_decode_modrm (int *mod,int *regh,int *regl); +u8 fetch_byte_imm (void); +u16 fetch_word_imm (void); +u32 fetch_long_imm (void); +u8 fetch_data_byte (uint offset); +u8 fetch_data_byte_abs (uint segment, uint offset); +u16 fetch_data_word (uint offset); +u16 fetch_data_word_abs (uint segment, uint offset); +u32 fetch_data_long (uint offset); +u32 fetch_data_long_abs (uint segment, uint offset); +void store_data_byte (uint offset, u8 val); +void store_data_byte_abs (uint segment, uint offset, u8 val); +void store_data_word (uint offset, u16 val); +void store_data_word_abs (uint segment, uint offset, u16 val); +void store_data_long (uint offset, u32 val); +void store_data_long_abs (uint segment, uint offset, u32 val); +u8* decode_rm_byte_register(int reg); +u16* decode_rm_word_register(int reg); +u32* decode_rm_long_register(int reg); +u16* decode_rm_seg_register(int reg); +unsigned decode_rm00_address(int rm); +unsigned decode_rm01_address(int rm); +unsigned decode_rm10_address(int rm); +unsigned decode_rmXX_address(int mod, int rm); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif + +#endif /* __X86EMU_DECODE_H */ diff --git a/drivers/bios_emulator/include/x86emu/ops.h b/drivers/bios_emulator/include/x86emu/ops.h new file mode 100644 index 0000000..a4f2316 --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/ops.h @@ -0,0 +1,45 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for operand decoding functions. +* +****************************************************************************/ + +#ifndef __X86EMU_OPS_H +#define __X86EMU_OPS_H + +extern void (*x86emu_optab[0x100])(u8 op1); +extern void (*x86emu_optab2[0x100])(u8 op2); + +#endif /* __X86EMU_OPS_H */ diff --git a/drivers/bios_emulator/include/x86emu/prim_asm.h b/drivers/bios_emulator/include/x86emu/prim_asm.h new file mode 100644 index 0000000..4cb4cab --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/prim_asm.h @@ -0,0 +1,970 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: Watcom C++ 10.6 or later +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Inline assembler versions of the primitive operand +* functions for faster performance. At the moment this is +* x86 inline assembler, but these functions could be replaced +* with native inline assembler for each supported processor +* platform. +* +****************************************************************************/ + +#ifndef __X86EMU_PRIM_ASM_H +#define __X86EMU_PRIM_ASM_H + +#ifdef __WATCOMC__ + +#ifndef VALIDATE +#define __HAVE_INLINE_ASSEMBLER__ +#endif + +u32 get_flags_asm(void); +#pragma aux get_flags_asm = \ + "pushf" \ + "pop eax" \ + value [eax] \ + modify exact [eax]; + +u16 aaa_word_asm(u32 * flags, u16 d); +#pragma aux aaa_word_asm = \ + "push [edi]" \ + "popf" \ + "aaa" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u16 aas_word_asm(u32 * flags, u16 d); +#pragma aux aas_word_asm = \ + "push [edi]" \ + "popf" \ + "aas" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u16 aad_word_asm(u32 * flags, u16 d); +#pragma aux aad_word_asm = \ + "push [edi]" \ + "popf" \ + "aad" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u16 aam_word_asm(u32 * flags, u8 d); +#pragma aux aam_word_asm = \ + "push [edi]" \ + "popf" \ + "aam" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [ax] \ + modify exact [ax]; + +u8 adc_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux adc_byte_asm = \ + "push [edi]" \ + "popf" \ + "adc al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 adc_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux adc_word_asm = \ + "push [edi]" \ + "popf" \ + "adc ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 adc_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux adc_long_asm = \ + "push [edi]" \ + "popf" \ + "adc eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 add_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux add_byte_asm = \ + "push [edi]" \ + "popf" \ + "add al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 add_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux add_word_asm = \ + "push [edi]" \ + "popf" \ + "add ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 add_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux add_long_asm = \ + "push [edi]" \ + "popf" \ + "add eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 and_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux and_byte_asm = \ + "push [edi]" \ + "popf" \ + "and al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 and_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux and_word_asm = \ + "push [edi]" \ + "popf" \ + "and ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 and_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux and_long_asm = \ + "push [edi]" \ + "popf" \ + "and eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 cmp_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux cmp_byte_asm = \ + "push [edi]" \ + "popf" \ + "cmp al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 cmp_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux cmp_word_asm = \ + "push [edi]" \ + "popf" \ + "cmp ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 cmp_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux cmp_long_asm = \ + "push [edi]" \ + "popf" \ + "cmp eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 daa_byte_asm(u32 * flags, u8 d); +#pragma aux daa_byte_asm = \ + "push [edi]" \ + "popf" \ + "daa" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u8 das_byte_asm(u32 * flags, u8 d); +#pragma aux das_byte_asm = \ + "push [edi]" \ + "popf" \ + "das" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u8 dec_byte_asm(u32 * flags, u8 d); +#pragma aux dec_byte_asm = \ + "push [edi]" \ + "popf" \ + "dec al" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u16 dec_word_asm(u32 * flags, u16 d); +#pragma aux dec_word_asm = \ + "push [edi]" \ + "popf" \ + "dec ax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u32 dec_long_asm(u32 * flags, u32 d); +#pragma aux dec_long_asm = \ + "push [edi]" \ + "popf" \ + "dec eax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] \ + value [eax] \ + modify exact [eax]; + +u8 inc_byte_asm(u32 * flags, u8 d); +#pragma aux inc_byte_asm = \ + "push [edi]" \ + "popf" \ + "inc al" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u16 inc_word_asm(u32 * flags, u16 d); +#pragma aux inc_word_asm = \ + "push [edi]" \ + "popf" \ + "inc ax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u32 inc_long_asm(u32 * flags, u32 d); +#pragma aux inc_long_asm = \ + "push [edi]" \ + "popf" \ + "inc eax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] \ + value [eax] \ + modify exact [eax]; + +u8 or_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux or_byte_asm = \ + "push [edi]" \ + "popf" \ + "or al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 or_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux or_word_asm = \ + "push [edi]" \ + "popf" \ + "or ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 or_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux or_long_asm = \ + "push [edi]" \ + "popf" \ + "or eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 neg_byte_asm(u32 * flags, u8 d); +#pragma aux neg_byte_asm = \ + "push [edi]" \ + "popf" \ + "neg al" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u16 neg_word_asm(u32 * flags, u16 d); +#pragma aux neg_word_asm = \ + "push [edi]" \ + "popf" \ + "neg ax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u32 neg_long_asm(u32 * flags, u32 d); +#pragma aux neg_long_asm = \ + "push [edi]" \ + "popf" \ + "neg eax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] \ + value [eax] \ + modify exact [eax]; + +u8 not_byte_asm(u32 * flags, u8 d); +#pragma aux not_byte_asm = \ + "push [edi]" \ + "popf" \ + "not al" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] \ + value [al] \ + modify exact [al]; + +u16 not_word_asm(u32 * flags, u16 d); +#pragma aux not_word_asm = \ + "push [edi]" \ + "popf" \ + "not ax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] \ + value [ax] \ + modify exact [ax]; + +u32 not_long_asm(u32 * flags, u32 d); +#pragma aux not_long_asm = \ + "push [edi]" \ + "popf" \ + "not eax" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] \ + value [eax] \ + modify exact [eax]; + +u8 rcl_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux rcl_byte_asm = \ + "push [edi]" \ + "popf" \ + "rcl al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 rcl_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux rcl_word_asm = \ + "push [edi]" \ + "popf" \ + "rcl ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 rcl_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux rcl_long_asm = \ + "push [edi]" \ + "popf" \ + "rcl eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 rcr_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux rcr_byte_asm = \ + "push [edi]" \ + "popf" \ + "rcr al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 rcr_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux rcr_word_asm = \ + "push [edi]" \ + "popf" \ + "rcr ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 rcr_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux rcr_long_asm = \ + "push [edi]" \ + "popf" \ + "rcr eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 rol_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux rol_byte_asm = \ + "push [edi]" \ + "popf" \ + "rol al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 rol_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux rol_word_asm = \ + "push [edi]" \ + "popf" \ + "rol ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 rol_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux rol_long_asm = \ + "push [edi]" \ + "popf" \ + "rol eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 ror_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux ror_byte_asm = \ + "push [edi]" \ + "popf" \ + "ror al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 ror_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux ror_word_asm = \ + "push [edi]" \ + "popf" \ + "ror ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 ror_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux ror_long_asm = \ + "push [edi]" \ + "popf" \ + "ror eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 shl_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux shl_byte_asm = \ + "push [edi]" \ + "popf" \ + "shl al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 shl_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux shl_word_asm = \ + "push [edi]" \ + "popf" \ + "shl ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 shl_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux shl_long_asm = \ + "push [edi]" \ + "popf" \ + "shl eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 shr_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux shr_byte_asm = \ + "push [edi]" \ + "popf" \ + "shr al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 shr_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux shr_word_asm = \ + "push [edi]" \ + "popf" \ + "shr ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 shr_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux shr_long_asm = \ + "push [edi]" \ + "popf" \ + "shr eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u8 sar_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux sar_byte_asm = \ + "push [edi]" \ + "popf" \ + "sar al,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [cl] \ + value [al] \ + modify exact [al cl]; + +u16 sar_word_asm(u32 * flags, u16 d, u8 s); +#pragma aux sar_word_asm = \ + "push [edi]" \ + "popf" \ + "sar ax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [cl] \ + value [ax] \ + modify exact [ax cl]; + +u32 sar_long_asm(u32 * flags, u32 d, u8 s); +#pragma aux sar_long_asm = \ + "push [edi]" \ + "popf" \ + "sar eax,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [cl] \ + value [eax] \ + modify exact [eax cl]; + +u16 shld_word_asm(u32 * flags, u16 d, u16 fill, u8 s); +#pragma aux shld_word_asm = \ + "push [edi]" \ + "popf" \ + "shld ax,dx,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [dx] [cl] \ + value [ax] \ + modify exact [ax dx cl]; + +u32 shld_long_asm(u32 * flags, u32 d, u32 fill, u8 s); +#pragma aux shld_long_asm = \ + "push [edi]" \ + "popf" \ + "shld eax,edx,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [edx] [cl] \ + value [eax] \ + modify exact [eax edx cl]; + +u16 shrd_word_asm(u32 * flags, u16 d, u16 fill, u8 s); +#pragma aux shrd_word_asm = \ + "push [edi]" \ + "popf" \ + "shrd ax,dx,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [dx] [cl] \ + value [ax] \ + modify exact [ax dx cl]; + +u32 shrd_long_asm(u32 * flags, u32 d, u32 fill, u8 s); +#pragma aux shrd_long_asm = \ + "push [edi]" \ + "popf" \ + "shrd eax,edx,cl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [edx] [cl] \ + value [eax] \ + modify exact [eax edx cl]; + +u8 sbb_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux sbb_byte_asm = \ + "push [edi]" \ + "popf" \ + "sbb al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 sbb_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux sbb_word_asm = \ + "push [edi]" \ + "popf" \ + "sbb ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 sbb_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux sbb_long_asm = \ + "push [edi]" \ + "popf" \ + "sbb eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +u8 sub_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux sub_byte_asm = \ + "push [edi]" \ + "popf" \ + "sub al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 sub_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux sub_word_asm = \ + "push [edi]" \ + "popf" \ + "sub ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 sub_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux sub_long_asm = \ + "push [edi]" \ + "popf" \ + "sub eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +void test_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux test_byte_asm = \ + "push [edi]" \ + "popf" \ + "test al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + modify exact [al bl]; + +void test_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux test_word_asm = \ + "push [edi]" \ + "popf" \ + "test ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + modify exact [ax bx]; + +void test_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux test_long_asm = \ + "push [edi]" \ + "popf" \ + "test eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + modify exact [eax ebx]; + +u8 xor_byte_asm(u32 * flags, u8 d, u8 s); +#pragma aux xor_byte_asm = \ + "push [edi]" \ + "popf" \ + "xor al,bl" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [al] [bl] \ + value [al] \ + modify exact [al bl]; + +u16 xor_word_asm(u32 * flags, u16 d, u16 s); +#pragma aux xor_word_asm = \ + "push [edi]" \ + "popf" \ + "xor ax,bx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [ax] [bx] \ + value [ax] \ + modify exact [ax bx]; + +u32 xor_long_asm(u32 * flags, u32 d, u32 s); +#pragma aux xor_long_asm = \ + "push [edi]" \ + "popf" \ + "xor eax,ebx" \ + "pushf" \ + "pop [edi]" \ + parm [edi] [eax] [ebx] \ + value [eax] \ + modify exact [eax ebx]; + +void imul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s); +#pragma aux imul_byte_asm = \ + "push [edi]" \ + "popf" \ + "imul bl" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + parm [edi] [esi] [al] [bl] \ + modify exact [esi ax bl]; + +void imul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s); +#pragma aux imul_word_asm = \ + "push [edi]" \ + "popf" \ + "imul bx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + "mov [ecx],dx" \ + parm [edi] [esi] [ecx] [ax] [bx]\ + modify exact [esi edi ax bx dx]; + +void imul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s); +#pragma aux imul_long_asm = \ + "push [edi]" \ + "popf" \ + "imul ebx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],eax" \ + "mov [ecx],edx" \ + parm [edi] [esi] [ecx] [eax] [ebx] \ + modify exact [esi edi eax ebx edx]; + +void mul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s); +#pragma aux mul_byte_asm = \ + "push [edi]" \ + "popf" \ + "mul bl" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + parm [edi] [esi] [al] [bl] \ + modify exact [esi ax bl]; + +void mul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s); +#pragma aux mul_word_asm = \ + "push [edi]" \ + "popf" \ + "mul bx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + "mov [ecx],dx" \ + parm [edi] [esi] [ecx] [ax] [bx]\ + modify exact [esi edi ax bx dx]; + +void mul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s); +#pragma aux mul_long_asm = \ + "push [edi]" \ + "popf" \ + "mul ebx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],eax" \ + "mov [ecx],edx" \ + parm [edi] [esi] [ecx] [eax] [ebx] \ + modify exact [esi edi eax ebx edx]; + +void idiv_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s); +#pragma aux idiv_byte_asm = \ + "push [edi]" \ + "popf" \ + "idiv bl" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],al" \ + "mov [ecx],ah" \ + parm [edi] [esi] [ecx] [ax] [bl]\ + modify exact [esi edi ax bl]; + +void idiv_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s); +#pragma aux idiv_word_asm = \ + "push [edi]" \ + "popf" \ + "idiv bx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + "mov [ecx],dx" \ + parm [edi] [esi] [ecx] [ax] [dx] [bx]\ + modify exact [esi edi ax dx bx]; + +void idiv_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s); +#pragma aux idiv_long_asm = \ + "push [edi]" \ + "popf" \ + "idiv ebx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],eax" \ + "mov [ecx],edx" \ + parm [edi] [esi] [ecx] [eax] [edx] [ebx]\ + modify exact [esi edi eax edx ebx]; + +void div_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s); +#pragma aux div_byte_asm = \ + "push [edi]" \ + "popf" \ + "div bl" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],al" \ + "mov [ecx],ah" \ + parm [edi] [esi] [ecx] [ax] [bl]\ + modify exact [esi edi ax bl]; + +void div_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s); +#pragma aux div_word_asm = \ + "push [edi]" \ + "popf" \ + "div bx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],ax" \ + "mov [ecx],dx" \ + parm [edi] [esi] [ecx] [ax] [dx] [bx]\ + modify exact [esi edi ax dx bx]; + +void div_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s); +#pragma aux div_long_asm = \ + "push [edi]" \ + "popf" \ + "div ebx" \ + "pushf" \ + "pop [edi]" \ + "mov [esi],eax" \ + "mov [ecx],edx" \ + parm [edi] [esi] [ecx] [eax] [edx] [ebx]\ + modify exact [esi edi eax edx ebx]; + +#endif + +#endif /* __X86EMU_PRIM_ASM_H */ diff --git a/drivers/bios_emulator/include/x86emu/prim_ops.h b/drivers/bios_emulator/include/x86emu/prim_ops.h new file mode 100644 index 0000000..0ea825d --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/prim_ops.h @@ -0,0 +1,142 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for primitive operation functions. +* +****************************************************************************/ + +#ifndef __X86EMU_PRIM_OPS_H +#define __X86EMU_PRIM_OPS_H + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + +u16 aaa_word (u16 d); +u16 aas_word (u16 d); +u16 aad_word (u16 d); +u16 aam_word (u8 d); +u8 adc_byte (u8 d, u8 s); +u16 adc_word (u16 d, u16 s); +u32 adc_long (u32 d, u32 s); +u8 add_byte (u8 d, u8 s); +u16 add_word (u16 d, u16 s); +u32 add_long (u32 d, u32 s); +u8 and_byte (u8 d, u8 s); +u16 and_word (u16 d, u16 s); +u32 and_long (u32 d, u32 s); +u8 cmp_byte (u8 d, u8 s); +u16 cmp_word (u16 d, u16 s); +u32 cmp_long (u32 d, u32 s); +u8 daa_byte (u8 d); +u8 das_byte (u8 d); +u8 dec_byte (u8 d); +u16 dec_word (u16 d); +u32 dec_long (u32 d); +u8 inc_byte (u8 d); +u16 inc_word (u16 d); +u32 inc_long (u32 d); +u8 or_byte (u8 d, u8 s); +u16 or_word (u16 d, u16 s); +u32 or_long (u32 d, u32 s); +u8 neg_byte (u8 s); +u16 neg_word (u16 s); +u32 neg_long (u32 s); +u8 not_byte (u8 s); +u16 not_word (u16 s); +u32 not_long (u32 s); +u8 rcl_byte (u8 d, u8 s); +u16 rcl_word (u16 d, u8 s); +u32 rcl_long (u32 d, u8 s); +u8 rcr_byte (u8 d, u8 s); +u16 rcr_word (u16 d, u8 s); +u32 rcr_long (u32 d, u8 s); +u8 rol_byte (u8 d, u8 s); +u16 rol_word (u16 d, u8 s); +u32 rol_long (u32 d, u8 s); +u8 ror_byte (u8 d, u8 s); +u16 ror_word (u16 d, u8 s); +u32 ror_long (u32 d, u8 s); +u8 shl_byte (u8 d, u8 s); +u16 shl_word (u16 d, u8 s); +u32 shl_long (u32 d, u8 s); +u8 shr_byte (u8 d, u8 s); +u16 shr_word (u16 d, u8 s); +u32 shr_long (u32 d, u8 s); +u8 sar_byte (u8 d, u8 s); +u16 sar_word (u16 d, u8 s); +u32 sar_long (u32 d, u8 s); +u16 shld_word (u16 d, u16 fill, u8 s); +u32 shld_long (u32 d, u32 fill, u8 s); +u16 shrd_word (u16 d, u16 fill, u8 s); +u32 shrd_long (u32 d, u32 fill, u8 s); +u8 sbb_byte (u8 d, u8 s); +u16 sbb_word (u16 d, u16 s); +u32 sbb_long (u32 d, u32 s); +u8 sub_byte (u8 d, u8 s); +u16 sub_word (u16 d, u16 s); +u32 sub_long (u32 d, u32 s); +void test_byte (u8 d, u8 s); +void test_word (u16 d, u16 s); +void test_long (u32 d, u32 s); +u8 xor_byte (u8 d, u8 s); +u16 xor_word (u16 d, u16 s); +u32 xor_long (u32 d, u32 s); +void imul_byte (u8 s); +void imul_word (u16 s); +void imul_long (u32 s); +void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s); +void mul_byte (u8 s); +void mul_word (u16 s); +void mul_long (u32 s); +void idiv_byte (u8 s); +void idiv_word (u16 s); +void idiv_long (u32 s); +void div_byte (u8 s); +void div_word (u16 s); +void div_long (u32 s); +void ins (int size); +void outs (int size); +u16 mem_access_word (int addr); +void push_word (u16 w); +void push_long (u32 w); +u16 pop_word (void); +u32 pop_long (void); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif + +#endif /* __X86EMU_PRIM_OPS_H */ + diff --git a/drivers/bios_emulator/include/x86emu/regs.h b/drivers/bios_emulator/include/x86emu/regs.h new file mode 100644 index 0000000..9dbed50 --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/regs.h @@ -0,0 +1,340 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for x86 register definitions. +* +****************************************************************************/ + +#ifndef __X86EMU_REGS_H +#define __X86EMU_REGS_H + +/*---------------------- Macros and type definitions ----------------------*/ + +#pragma pack(1) + +/* + * General EAX, EBX, ECX, EDX type registers. Note that for + * portability, and speed, the issue of byte swapping is not addressed + * in the registers. All registers are stored in the default format + * available on the host machine. The only critical issue is that the + * registers should line up EXACTLY in the same manner as they do in + * the 386. That is: + * + * EAX & 0xff === AL + * EAX & 0xffff == AX + * + * etc. The result is that alot of the calculations can then be + * done using the native instruction set fully. + */ + +#ifdef __BIG_ENDIAN__ + +typedef struct { + u32 e_reg; +} I32_reg_t; + +typedef struct { + u16 filler0, x_reg; +} I16_reg_t; + +typedef struct { + u8 filler0, filler1, h_reg, l_reg; +} I8_reg_t; + +#else /* !__BIG_ENDIAN__ */ + +typedef struct { + u32 e_reg; +} I32_reg_t; + +typedef struct { + u16 x_reg; +} I16_reg_t; + +typedef struct { + u8 l_reg, h_reg; +} I8_reg_t; + +#endif /* BIG_ENDIAN */ + +typedef union { + I32_reg_t I32_reg; + I16_reg_t I16_reg; + I8_reg_t I8_reg; +} i386_general_register; + +struct i386_general_regs { + i386_general_register A, B, C, D; +}; + +typedef struct i386_general_regs Gen_reg_t; + +struct i386_special_regs { + i386_general_register SP, BP, SI, DI, IP; + u32 FLAGS; +}; + +/* + * Segment registers here represent the 16 bit quantities + * CS, DS, ES, SS. + */ + +#undef CS +#undef DS +#undef SS +#undef ES +#undef FS +#undef GS + +struct i386_segment_regs { + u16 CS, DS, SS, ES, FS, GS; +}; + +/* 8 bit registers */ +#define R_AH gen.A.I8_reg.h_reg +#define R_AL gen.A.I8_reg.l_reg +#define R_BH gen.B.I8_reg.h_reg +#define R_BL gen.B.I8_reg.l_reg +#define R_CH gen.C.I8_reg.h_reg +#define R_CL gen.C.I8_reg.l_reg +#define R_DH gen.D.I8_reg.h_reg +#define R_DL gen.D.I8_reg.l_reg + +/* 16 bit registers */ +#define R_AX gen.A.I16_reg.x_reg +#define R_BX gen.B.I16_reg.x_reg +#define R_CX gen.C.I16_reg.x_reg +#define R_DX gen.D.I16_reg.x_reg + +/* 32 bit extended registers */ +#define R_EAX gen.A.I32_reg.e_reg +#define R_EBX gen.B.I32_reg.e_reg +#define R_ECX gen.C.I32_reg.e_reg +#define R_EDX gen.D.I32_reg.e_reg + +/* special registers */ +#define R_SP spc.SP.I16_reg.x_reg +#define R_BP spc.BP.I16_reg.x_reg +#define R_SI spc.SI.I16_reg.x_reg +#define R_DI spc.DI.I16_reg.x_reg +#define R_IP spc.IP.I16_reg.x_reg +#define R_FLG spc.FLAGS + +/* special registers */ +#define R_SP spc.SP.I16_reg.x_reg +#define R_BP spc.BP.I16_reg.x_reg +#define R_SI spc.SI.I16_reg.x_reg +#define R_DI spc.DI.I16_reg.x_reg +#define R_IP spc.IP.I16_reg.x_reg +#define R_FLG spc.FLAGS + +/* special registers */ +#define R_ESP spc.SP.I32_reg.e_reg +#define R_EBP spc.BP.I32_reg.e_reg +#define R_ESI spc.SI.I32_reg.e_reg +#define R_EDI spc.DI.I32_reg.e_reg +#define R_EIP spc.IP.I32_reg.e_reg +#define R_EFLG spc.FLAGS + +/* segment registers */ +#define R_CS seg.CS +#define R_DS seg.DS +#define R_SS seg.SS +#define R_ES seg.ES +#define R_FS seg.FS +#define R_GS seg.GS + +/* flag conditions */ +#define FB_CF 0x0001 /* CARRY flag */ +#define FB_PF 0x0004 /* PARITY flag */ +#define FB_AF 0x0010 /* AUX flag */ +#define FB_ZF 0x0040 /* ZERO flag */ +#define FB_SF 0x0080 /* SIGN flag */ +#define FB_TF 0x0100 /* TRAP flag */ +#define FB_IF 0x0200 /* INTERRUPT ENABLE flag */ +#define FB_DF 0x0400 /* DIR flag */ +#define FB_OF 0x0800 /* OVERFLOW flag */ + +/* 80286 and above always have bit#1 set */ +#define F_ALWAYS_ON (0x0002) /* flag bits always on */ + +/* + * Define a mask for only those flag bits we will ever pass back + * (via PUSHF) + */ +#define F_MSK (FB_CF|FB_PF|FB_AF|FB_ZF|FB_SF|FB_TF|FB_IF|FB_DF|FB_OF) + +/* following bits masked in to a 16bit quantity */ + +#define F_CF 0x0001 /* CARRY flag */ +#define F_PF 0x0004 /* PARITY flag */ +#define F_AF 0x0010 /* AUX flag */ +#define F_ZF 0x0040 /* ZERO flag */ +#define F_SF 0x0080 /* SIGN flag */ +#define F_TF 0x0100 /* TRAP flag */ +#define F_IF 0x0200 /* INTERRUPT ENABLE flag */ +#define F_DF 0x0400 /* DIR flag */ +#define F_OF 0x0800 /* OVERFLOW flag */ + +#define TOGGLE_FLAG(flag) (M.x86.R_FLG ^= (flag)) +#define SET_FLAG(flag) (M.x86.R_FLG |= (flag)) +#define CLEAR_FLAG(flag) (M.x86.R_FLG &= ~(flag)) +#define ACCESS_FLAG(flag) (M.x86.R_FLG & (flag)) +#define CLEARALL_FLAG(m) (M.x86.R_FLG = 0) + +#define CONDITIONAL_SET_FLAG(COND,FLAG) \ + if (COND) SET_FLAG(FLAG); else CLEAR_FLAG(FLAG) + +#define F_PF_CALC 0x010000 /* PARITY flag has been calced */ +#define F_ZF_CALC 0x020000 /* ZERO flag has been calced */ +#define F_SF_CALC 0x040000 /* SIGN flag has been calced */ + +#define F_ALL_CALC 0xff0000 /* All have been calced */ + +/* + * Emulator machine state. + * Segment usage control. + */ +#define SYSMODE_SEG_DS_SS 0x00000001 +#define SYSMODE_SEGOVR_CS 0x00000002 +#define SYSMODE_SEGOVR_DS 0x00000004 +#define SYSMODE_SEGOVR_ES 0x00000008 +#define SYSMODE_SEGOVR_FS 0x00000010 +#define SYSMODE_SEGOVR_GS 0x00000020 +#define SYSMODE_SEGOVR_SS 0x00000040 +#define SYSMODE_PREFIX_REPE 0x00000080 +#define SYSMODE_PREFIX_REPNE 0x00000100 +#define SYSMODE_PREFIX_DATA 0x00000200 +#define SYSMODE_PREFIX_ADDR 0x00000400 +#define SYSMODE_INTR_PENDING 0x10000000 +#define SYSMODE_EXTRN_INTR 0x20000000 +#define SYSMODE_HALTED 0x40000000 + +#define SYSMODE_SEGMASK (SYSMODE_SEG_DS_SS | \ + SYSMODE_SEGOVR_CS | \ + SYSMODE_SEGOVR_DS | \ + SYSMODE_SEGOVR_ES | \ + SYSMODE_SEGOVR_FS | \ + SYSMODE_SEGOVR_GS | \ + SYSMODE_SEGOVR_SS) +#define SYSMODE_CLRMASK (SYSMODE_SEG_DS_SS | \ + SYSMODE_SEGOVR_CS | \ + SYSMODE_SEGOVR_DS | \ + SYSMODE_SEGOVR_ES | \ + SYSMODE_SEGOVR_FS | \ + SYSMODE_SEGOVR_GS | \ + SYSMODE_SEGOVR_SS | \ + SYSMODE_PREFIX_DATA | \ + SYSMODE_PREFIX_ADDR) + +#define INTR_SYNCH 0x1 +#define INTR_ASYNCH 0x2 +#define INTR_HALTED 0x4 + +typedef struct { + struct i386_general_regs gen; + struct i386_special_regs spc; + struct i386_segment_regs seg; + /* + * MODE contains information on: + * REPE prefix 2 bits repe,repne + * SEGMENT overrides 5 bits normal,DS,SS,CS,ES + * Delayed flag set 3 bits (zero, signed, parity) + * reserved 6 bits + * interrupt # 8 bits instruction raised interrupt + * BIOS video segregs 4 bits + * Interrupt Pending 1 bits + * Extern interrupt 1 bits + * Halted 1 bits + */ + long mode; + u8 intno; + volatile int intr; /* mask of pending interrupts */ + int debug; +#ifdef DEBUG + int check; + u16 saved_ip; + u16 saved_cs; + int enc_pos; + int enc_str_pos; + char decode_buf[32]; /* encoded byte stream */ + char decoded_buf[256]; /* disassembled strings */ +#endif +} X86EMU_regs; + +/**************************************************************************** +REMARKS: +Structure maintaining the emulator machine state. + +MEMBERS: +x86 - X86 registers +mem_base - Base real mode memory for the emulator +mem_size - Size of the real mode memory block for the emulator +****************************************************************************/ +#undef x86 +typedef struct { + X86EMU_regs x86; + u8 *mem_base; + u32 mem_size; + void *private; +} X86EMU_sysEnv; + +#pragma pack() + +/*----------------------------- Global Variables --------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + +/* Global emulator machine state. + * + * We keep it global to avoid pointer dereferences in the code for speed. + */ + + extern X86EMU_sysEnv _X86EMU_env; +#define M _X86EMU_env + +/*-------------------------- Function Prototypes --------------------------*/ + +/* Function to log information at runtime */ + +#ifndef __KERNEL__ + void printk(const char *fmt, ...); +#endif + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif +#endif /* __X86EMU_REGS_H */ diff --git a/drivers/bios_emulator/include/x86emu/x86emui.h b/drivers/bios_emulator/include/x86emu/x86emui.h new file mode 100644 index 0000000..a74957d --- /dev/null +++ b/drivers/bios_emulator/include/x86emu/x86emui.h @@ -0,0 +1,101 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: Header file for system specific functions. These functions +* are always compiled and linked in the OS depedent libraries, +* and never in a binary portable driver. +* +****************************************************************************/ + +#ifndef __X86EMU_X86EMUI_H +#define __X86EMU_X86EMUI_H + +/* If we are compiling in C++ mode, we can compile some functions as + * inline to increase performance (however the code size increases quite + * dramatically in this case). + */ + +#if defined(__cplusplus) && !defined(_NO_INLINE) +#define _INLINE inline +#else +#define _INLINE static +#endif + +/* Get rid of unused parameters in C++ compilation mode */ + +#ifdef __cplusplus +#define X86EMU_UNUSED(v) +#else +#define X86EMU_UNUSED(v) v +#endif + +#include "x86emu.h" +#include "x86emu/regs.h" +#include "x86emu/debug.h" +#include "x86emu/decode.h" +#include "x86emu/ops.h" +#include "x86emu/prim_ops.h" +#ifndef __KERNEL__ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#endif + +#define printk printf + + +/*--------------------------- Inline Functions ----------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + + extern u8(X86APIP sys_rdb) (u32 addr); + extern u16(X86APIP sys_rdw) (u32 addr); + extern u32(X86APIP sys_rdl) (u32 addr); + extern void (X86APIP sys_wrb) (u32 addr, u8 val); + extern void (X86APIP sys_wrw) (u32 addr, u16 val); + extern void (X86APIP sys_wrl) (u32 addr, u32 val); + + extern u8(X86APIP sys_inb) (X86EMU_pioAddr addr); + extern u16(X86APIP sys_inw) (X86EMU_pioAddr addr); + extern u32(X86APIP sys_inl) (X86EMU_pioAddr addr); + extern void (X86APIP sys_outb) (X86EMU_pioAddr addr, u8 val); + extern void (X86APIP sys_outw) (X86EMU_pioAddr addr, u16 val); + extern void (X86APIP sys_outl) (X86EMU_pioAddr addr, u32 val); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif +#endif /* __X86EMU_X86EMUI_H */ diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c new file mode 100644 index 0000000..0f58a69 --- /dev/null +++ b/drivers/bios_emulator/x86emu/debug.c @@ -0,0 +1,461 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file contains the code to handle debugging of the +* emulator. +* +****************************************************************************/ + +#include "x86emu/x86emui.h" +#include <stdarg.h> + +/*----------------------------- Implementation ----------------------------*/ + +#ifdef DEBUG + +static void print_encoded_bytes(u16 s, u16 o); +static void print_decoded_instruction(void); +static int parse_line(char *s, int *ps, int *n); + +/* should look something like debug's output. */ +void X86EMU_trace_regs(void) +{ + if (DEBUG_TRACE()) { + x86emu_dump_regs(); + } + if (DEBUG_DECODE() && !DEBUG_DECODE_NOPRINT()) { + printk("%04x:%04x ", M.x86.saved_cs, M.x86.saved_ip); + print_encoded_bytes(M.x86.saved_cs, M.x86.saved_ip); + print_decoded_instruction(); + } +} + +void X86EMU_trace_xregs(void) +{ + if (DEBUG_TRACE()) { + x86emu_dump_xregs(); + } +} + +void x86emu_just_disassemble(void) +{ + /* + * This routine called if the flag DEBUG_DISASSEMBLE is set kind + * of a hack! + */ + printk("%04x:%04x ", M.x86.saved_cs, M.x86.saved_ip); + print_encoded_bytes(M.x86.saved_cs, M.x86.saved_ip); + print_decoded_instruction(); +} + +static void disassemble_forward(u16 seg, u16 off, int n) +{ + X86EMU_sysEnv tregs; + int i; + u8 op1; + /* + * hack, hack, hack. What we do is use the exact machinery set up + * for execution, except that now there is an additional state + * flag associated with the "execution", and we are using a copy + * of the register struct. All the major opcodes, once fully + * decoded, have the following two steps: TRACE_REGS(r,m); + * SINGLE_STEP(r,m); which disappear if DEBUG is not defined to + * the preprocessor. The TRACE_REGS macro expands to: + * + * if (debug&DEBUG_DISASSEMBLE) + * {just_disassemble(); goto EndOfInstruction;} + * if (debug&DEBUG_TRACE) trace_regs(r,m); + * + * ...... and at the last line of the routine. + * + * EndOfInstruction: end_instr(); + * + * Up to the point where TRACE_REG is expanded, NO modifications + * are done to any register EXCEPT the IP register, for fetch and + * decoding purposes. + * + * This was done for an entirely different reason, but makes a + * nice way to get the system to help debug codes. + */ + tregs = M; + tregs.x86.R_IP = off; + tregs.x86.R_CS = seg; + + /* reset the decoding buffers */ + tregs.x86.enc_str_pos = 0; + tregs.x86.enc_pos = 0; + + /* turn on the "disassemble only, no execute" flag */ + tregs.x86.debug |= DEBUG_DISASSEMBLE_F; + + /* DUMP NEXT n instructions to screen in straight_line fashion */ + /* + * This looks like the regular instruction fetch stream, except + * that when this occurs, each fetched opcode, upon seeing the + * DEBUG_DISASSEMBLE flag set, exits immediately after decoding + * the instruction. XXX --- CHECK THAT MEM IS NOT AFFECTED!!! + * Note the use of a copy of the register structure... + */ + for (i = 0; i < n; i++) { + op1 = (*sys_rdb) (((u32) M.x86.R_CS << 4) + (M.x86.R_IP++)); + (x86emu_optab[op1]) (op1); + } + /* end major hack mode. */ +} + +void x86emu_check_ip_access(void) +{ + /* NULL as of now */ +} + +void x86emu_check_sp_access(void) +{ +} + +void x86emu_check_mem_access(u32 dummy) +{ + /* check bounds, etc */ +} + +void x86emu_check_data_access(uint dummy1, uint dummy2) +{ + /* check bounds, etc */ +} + +void x86emu_inc_decoded_inst_len(int x) +{ + M.x86.enc_pos += x; +} + +void x86emu_decode_printf(char *x) +{ + sprintf(M.x86.decoded_buf + M.x86.enc_str_pos, "%s", x); + M.x86.enc_str_pos += strlen(x); +} + +void x86emu_decode_printf2(char *x, int y) +{ + char temp[100]; + sprintf(temp, x, y); + sprintf(M.x86.decoded_buf + M.x86.enc_str_pos, "%s", temp); + M.x86.enc_str_pos += strlen(temp); +} + +void x86emu_end_instr(void) +{ + M.x86.enc_str_pos = 0; + M.x86.enc_pos = 0; +} + +static void print_encoded_bytes(u16 s, u16 o) +{ + int i; + char buf1[64]; + for (i = 0; i < M.x86.enc_pos; i++) { + sprintf(buf1 + 2 * i, "%02x", fetch_data_byte_abs(s, o + i)); + } + printk("%-20s", buf1); +} + +static void print_decoded_instruction(void) +{ + printk("%s", M.x86.decoded_buf); +} + +void x86emu_print_int_vect(u16 iv) +{ + u16 seg, off; + + if (iv > 256) + return; + seg = fetch_data_word_abs(0, iv * 4); + off = fetch_data_word_abs(0, iv * 4 + 2); + printk("%04x:%04x ", seg, off); +} + +void X86EMU_dump_memory(u16 seg, u16 off, u32 amt) +{ + u32 start = off & 0xfffffff0; + u32 end = (off + 16) & 0xfffffff0; + u32 i; + u32 current; + + current = start; + while (end <= off + amt) { + printk("%04x:%04x ", seg, start); + for (i = start; i < off; i++) + printk(" "); + for (; i < end; i++) + printk("%02x ", fetch_data_byte_abs(seg, i)); + printk("\n"); + start = end; + end = start + 16; + } +} + +void x86emu_single_step(void) +{ + char s[1024]; + int ps[10]; + int ntok; + int cmd; + int done; + int segment; + int offset; + static int breakpoint; + static int noDecode = 1; + + char *p; + + if (DEBUG_BREAK()) { + if (M.x86.saved_ip != breakpoint) { + return; + } else { + M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F; + M.x86.debug |= DEBUG_TRACE_F; + M.x86.debug &= ~DEBUG_BREAK_F; + print_decoded_instruction(); + X86EMU_trace_regs(); + } + } + done = 0; + offset = M.x86.saved_ip; + while (!done) { + printk("-"); + cmd = parse_line(s, ps, &ntok); + switch (cmd) { + case 'u': + disassemble_forward(M.x86.saved_cs, (u16) offset, 10); + break; + case 'd': + if (ntok == 2) { + segment = M.x86.saved_cs; + offset = ps[1]; + X86EMU_dump_memory(segment, (u16) offset, 16); + offset += 16; + } else if (ntok == 3) { + segment = ps[1]; + offset = ps[2]; + X86EMU_dump_memory(segment, (u16) offset, 16); + offset += 16; + } else { + segment = M.x86.saved_cs; + X86EMU_dump_memory(segment, (u16) offset, 16); + offset += 16; + } + break; + case 'c': + M.x86.debug ^= DEBUG_TRACECALL_F; + break; + case 's': + M.x86.debug ^= + DEBUG_SVC_F | DEBUG_SYS_F | DEBUG_SYSINT_F; + break; + case 'r': + X86EMU_trace_regs(); + break; + case 'x': + X86EMU_trace_xregs(); + break; + case 'g': + if (ntok == 2) { + breakpoint = ps[1]; + if (noDecode) { + M.x86.debug |= DEBUG_DECODE_NOPRINT_F; + } else { + M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F; + } + M.x86.debug &= ~DEBUG_TRACE_F; + M.x86.debug |= DEBUG_BREAK_F; + done = 1; + } + break; + case 'q': + M.x86.debug |= DEBUG_EXIT; + return; + case 'P': + noDecode = (noDecode) ? 0 : 1; + printk("Toggled decoding to %s\n", + (noDecode) ? "FALSE" : "TRUE"); + break; + case 't': + case 0: + done = 1; + break; + } + } +} + +int X86EMU_trace_on(void) +{ + return M.x86.debug |= DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F; +} + +int X86EMU_trace_off(void) +{ + return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F); +} + +static int parse_line(char *s, int *ps, int *n) +{ + int cmd; + + *n = 0; + while (*s == ' ' || *s == '\t') + s++; + ps[*n] = *s; + switch (*s) { + case '\n': + *n += 1; + return 0; + default: + cmd = *s; + *n += 1; + } + + while (1) { + while (*s != ' ' && *s != '\t' && *s != '\n') + s++; + + if (*s == '\n') + return cmd; + + while (*s == ' ' || *s == '\t') + s++; + + *n += 1; + } +} + +#endif /* DEBUG */ + +void x86emu_dump_regs(void) +{ + printk("\tAX=%04x ", M.x86.R_AX); + printk("BX=%04x ", M.x86.R_BX); + printk("CX=%04x ", M.x86.R_CX); + printk("DX=%04x ", M.x86.R_DX); + printk("SP=%04x ", M.x86.R_SP); + printk("BP=%04x ", M.x86.R_BP); + printk("SI=%04x ", M.x86.R_SI); + printk("DI=%04x\n", M.x86.R_DI); + printk("\tDS=%04x ", M.x86.R_DS); + printk("ES=%04x ", M.x86.R_ES); + printk("SS=%04x ", M.x86.R_SS); + printk("CS=%04x ", M.x86.R_CS); + printk("IP=%04x ", M.x86.R_IP); + if (ACCESS_FLAG(F_OF)) + printk("OV "); /* CHECKED... */ + else + printk("NV "); + if (ACCESS_FLAG(F_DF)) + printk("DN "); + else + printk("UP "); + if (ACCESS_FLAG(F_IF)) + printk("EI "); + else + printk("DI "); + if (ACCESS_FLAG(F_SF)) + printk("NG "); + else + printk("PL "); + if (ACCESS_FLAG(F_ZF)) + printk("ZR "); + else + printk("NZ "); + if (ACCESS_FLAG(F_AF)) + printk("AC "); + else + printk("NA "); + if (ACCESS_FLAG(F_PF)) + printk("PE "); + else + printk("PO "); + if (ACCESS_FLAG(F_CF)) + printk("CY "); + else + printk("NC "); + printk("\n"); +} + +void x86emu_dump_xregs(void) +{ + printk("\tEAX=%08x ", M.x86.R_EAX); + printk("EBX=%08x ", M.x86.R_EBX); + printk("ECX=%08x ", M.x86.R_ECX); + printk("EDX=%08x \n", M.x86.R_EDX); + printk("\tESP=%08x ", M.x86.R_ESP); + printk("EBP=%08x ", M.x86.R_EBP); + printk("ESI=%08x ", M.x86.R_ESI); + printk("EDI=%08x\n", M.x86.R_EDI); + printk("\tDS=%04x ", M.x86.R_DS); + printk("ES=%04x ", M.x86.R_ES); + printk("SS=%04x ", M.x86.R_SS); + printk("CS=%04x ", M.x86.R_CS); + printk("EIP=%08x\n\t", M.x86.R_EIP); + if (ACCESS_FLAG(F_OF)) + printk("OV "); /* CHECKED... */ + else + printk("NV "); + if (ACCESS_FLAG(F_DF)) + printk("DN "); + else + printk("UP "); + if (ACCESS_FLAG(F_IF)) + printk("EI "); + else + printk("DI "); + if (ACCESS_FLAG(F_SF)) + printk("NG "); + else + printk("PL "); + if (ACCESS_FLAG(F_ZF)) + printk("ZR "); + else + printk("NZ "); + if (ACCESS_FLAG(F_AF)) + printk("AC "); + else + printk("NA "); + if (ACCESS_FLAG(F_PF)) + printk("PE "); + else + printk("PO "); + if (ACCESS_FLAG(F_CF)) + printk("CY "); + else + printk("NC "); + printk("\n"); +} diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c new file mode 100644 index 0000000..b4dbb20 --- /dev/null +++ b/drivers/bios_emulator/x86emu/decode.c @@ -0,0 +1,1148 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file includes subroutines which are related to +* instruction decoding and accessess of immediate data via IP. etc. +* +****************************************************************************/ + +#include "x86emu/x86emui.h" + +/*----------------------------- Implementation ----------------------------*/ + +/**************************************************************************** +REMARKS: +Handles any pending asychronous interrupts. +****************************************************************************/ +static void x86emu_intr_handle(void) +{ + u8 intno; + + if (M.x86.intr & INTR_SYNCH) { + intno = M.x86.intno; + if (_X86EMU_intrTab[intno]) { + (*_X86EMU_intrTab[intno])(intno); + } else { + push_word((u16)M.x86.R_FLG); + CLEAR_FLAG(F_IF); + CLEAR_FLAG(F_TF); + push_word(M.x86.R_CS); + M.x86.R_CS = mem_access_word(intno * 4 + 2); + push_word(M.x86.R_IP); + M.x86.R_IP = mem_access_word(intno * 4); + M.x86.intr = 0; + } + } +} + +/**************************************************************************** +PARAMETERS: +intrnum - Interrupt number to raise + +REMARKS: +Raise the specified interrupt to be handled before the execution of the +next instruction. +****************************************************************************/ +void x86emu_intr_raise( + u8 intrnum) +{ + M.x86.intno = intrnum; + M.x86.intr |= INTR_SYNCH; +} + +/**************************************************************************** +REMARKS: +Main execution loop for the emulator. We return from here when the system +halts, which is normally caused by a stack fault when we return from the +original real mode call. +****************************************************************************/ +void X86EMU_exec(void) +{ + u8 op1; + + M.x86.intr = 0; + DB(x86emu_end_instr();) + + for (;;) { +DB( if (CHECK_IP_FETCH()) + x86emu_check_ip_access();) + /* If debugging, save the IP and CS values. */ + SAVE_IP_CS(M.x86.R_CS, M.x86.R_IP); + INC_DECODED_INST_LEN(1); + if (M.x86.intr) { + if (M.x86.intr & INTR_HALTED) { +DB( if (M.x86.R_SP != 0) { + printk("halted\n"); + X86EMU_trace_regs(); + } + else { + if (M.x86.debug) + printk("Service completed successfully\n"); + }) + return; + } + if (((M.x86.intr & INTR_SYNCH) && (M.x86.intno == 0 || M.x86.intno == 2)) || + !ACCESS_FLAG(F_IF)) { + x86emu_intr_handle(); + } + } + op1 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++)); + (*x86emu_optab[op1])(op1); + if (M.x86.debug & DEBUG_EXIT) { + M.x86.debug &= ~DEBUG_EXIT; + return; + } + } +} + +/**************************************************************************** +REMARKS: +Halts the system by setting the halted system flag. +****************************************************************************/ +void X86EMU_halt_sys(void) +{ + M.x86.intr |= INTR_HALTED; +} + +/**************************************************************************** +PARAMETERS: +mod - Mod value from decoded byte +regh - Reg h value from decoded byte +regl - Reg l value from decoded byte + +REMARKS: +Raise the specified interrupt to be handled before the execution of the +next instruction. + +NOTE: Do not inline this function, as (*sys_rdb) is already inline! +****************************************************************************/ +void fetch_decode_modrm( + int *mod, + int *regh, + int *regl) +{ + int fetched; + +DB( if (CHECK_IP_FETCH()) + x86emu_check_ip_access();) + fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++)); + INC_DECODED_INST_LEN(1); + *mod = (fetched >> 6) & 0x03; + *regh = (fetched >> 3) & 0x07; + *regl = (fetched >> 0) & 0x07; +} + +/**************************************************************************** +RETURNS: +Immediate byte value read from instruction queue + +REMARKS: +This function returns the immediate byte from the instruction queue, and +moves the instruction pointer to the next value. + +NOTE: Do not inline this function, as (*sys_rdb) is already inline! +****************************************************************************/ +u8 fetch_byte_imm(void) +{ + u8 fetched; + +DB( if (CHECK_IP_FETCH()) + x86emu_check_ip_access();) + fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++)); + INC_DECODED_INST_LEN(1); + return fetched; +} + +/**************************************************************************** +RETURNS: +Immediate word value read from instruction queue + +REMARKS: +This function returns the immediate byte from the instruction queue, and +moves the instruction pointer to the next value. + +NOTE: Do not inline this function, as (*sys_rdw) is already inline! +****************************************************************************/ +u16 fetch_word_imm(void) +{ + u16 fetched; + +DB( if (CHECK_IP_FETCH()) + x86emu_check_ip_access();) + fetched = (*sys_rdw)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP)); + M.x86.R_IP += 2; + INC_DECODED_INST_LEN(2); + return fetched; +} + +/**************************************************************************** +RETURNS: +Immediate lone value read from instruction queue + +REMARKS: +This function returns the immediate byte from the instruction queue, and +moves the instruction pointer to the next value. + +NOTE: Do not inline this function, as (*sys_rdw) is already inline! +****************************************************************************/ +u32 fetch_long_imm(void) +{ + u32 fetched; + +DB( if (CHECK_IP_FETCH()) + x86emu_check_ip_access();) + fetched = (*sys_rdl)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP)); + M.x86.R_IP += 4; + INC_DECODED_INST_LEN(4); + return fetched; +} + +/**************************************************************************** +RETURNS: +Value of the default data segment + +REMARKS: +Inline function that returns the default data segment for the current +instruction. + +On the x86 processor, the default segment is not always DS if there is +no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to +addresses relative to SS (ie: on the stack). So, at the minimum, all +decodings of addressing modes would have to set/clear a bit describing +whether the access is relative to DS or SS. That is the function of the +cpu-state-varible M.x86.mode. There are several potential states: + + repe prefix seen (handled elsewhere) + repne prefix seen (ditto) + + cs segment override + ds segment override + es segment override + fs segment override + gs segment override + ss segment override + + ds/ss select (in absense of override) + +Each of the above 7 items are handled with a bit in the mode field. +****************************************************************************/ +_INLINE u32 get_data_segment(void) +{ +#define GET_SEGMENT(segment) + switch (M.x86.mode & SYSMODE_SEGMASK) { + case 0: /* default case: use ds register */ + case SYSMODE_SEGOVR_DS: + case SYSMODE_SEGOVR_DS | SYSMODE_SEG_DS_SS: + return M.x86.R_DS; + case SYSMODE_SEG_DS_SS: /* non-overridden, use ss register */ + return M.x86.R_SS; + case SYSMODE_SEGOVR_CS: + case SYSMODE_SEGOVR_CS | SYSMODE_SEG_DS_SS: + return M.x86.R_CS; + case SYSMODE_SEGOVR_ES: + case SYSMODE_SEGOVR_ES | SYSMODE_SEG_DS_SS: + return M.x86.R_ES; + case SYSMODE_SEGOVR_FS: + case SYSMODE_SEGOVR_FS | SYSMODE_SEG_DS_SS: + return M.x86.R_FS; + case SYSMODE_SEGOVR_GS: + case SYSMODE_SEGOVR_GS | SYSMODE_SEG_DS_SS: + return M.x86.R_GS; + case SYSMODE_SEGOVR_SS: + case SYSMODE_SEGOVR_SS | SYSMODE_SEG_DS_SS: + return M.x86.R_SS; + default: +#ifdef DEBUG + printk("error: should not happen: multiple overrides.\n"); +#endif + HALT_SYS(); + return 0; + } +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to load data from + +RETURNS: +Byte value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u8 fetch_data_byte( + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + return (*sys_rdb)((get_data_segment() << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to load data from + +RETURNS: +Word value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u16 fetch_data_word( + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + return (*sys_rdw)((get_data_segment() << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to load data from + +RETURNS: +Long value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u32 fetch_data_long( + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + return (*sys_rdl)((get_data_segment() << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to load data from +offset - Offset to load data from + +RETURNS: +Byte value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u8 fetch_data_byte_abs( + uint segment, + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + return (*sys_rdb)(((u32)segment << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to load data from +offset - Offset to load data from + +RETURNS: +Word value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u16 fetch_data_word_abs( + uint segment, + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + return (*sys_rdw)(((u32)segment << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to load data from +offset - Offset to load data from + +RETURNS: +Long value read from the absolute memory location. + +NOTE: Do not inline this function as (*sys_rdX) is already inline! +****************************************************************************/ +u32 fetch_data_long_abs( + uint segment, + uint offset) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + return (*sys_rdl)(((u32)segment << 4) + offset); +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a word value to an segmented memory location. The segment used is +the current 'default' segment, which may have been overridden. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_byte( + uint offset, + u8 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + (*sys_wrb)((get_data_segment() << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a word value to an segmented memory location. The segment used is +the current 'default' segment, which may have been overridden. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_word( + uint offset, + u16 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + (*sys_wrw)((get_data_segment() << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a long value to an segmented memory location. The segment used is +the current 'default' segment, which may have been overridden. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_long( + uint offset, + u32 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access((u16)get_data_segment(), offset); +#endif + (*sys_wrl)((get_data_segment() << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to store data at +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a byte value to an absolute memory location. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_byte_abs( + uint segment, + uint offset, + u8 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + (*sys_wrb)(((u32)segment << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to store data at +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a word value to an absolute memory location. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_word_abs( + uint segment, + uint offset, + u16 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + (*sys_wrw)(((u32)segment << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +segment - Segment to store data at +offset - Offset to store data at +val - Value to store + +REMARKS: +Writes a long value to an absolute memory location. + +NOTE: Do not inline this function as (*sys_wrX) is already inline! +****************************************************************************/ +void store_data_long_abs( + uint segment, + uint offset, + u32 val) +{ +#ifdef DEBUG + if (CHECK_DATA_ACCESS()) + x86emu_check_data_access(segment, offset); +#endif + (*sys_wrl)(((u32)segment << 4) + offset, val); +} + +/**************************************************************************** +PARAMETERS: +reg - Register to decode + +RETURNS: +Pointer to the appropriate register + +REMARKS: +Return a pointer to the register given by the R/RM field of the +modrm byte, for byte operands. Also enables the decoding of instructions. +****************************************************************************/ +u8* decode_rm_byte_register( + int reg) +{ + switch (reg) { + case 0: + DECODE_PRINTF("AL"); + return &M.x86.R_AL; + case 1: + DECODE_PRINTF("CL"); + return &M.x86.R_CL; + case 2: + DECODE_PRINTF("DL"); + return &M.x86.R_DL; + case 3: + DECODE_PRINTF("BL"); + return &M.x86.R_BL; + case 4: + DECODE_PRINTF("AH"); + return &M.x86.R_AH; + case 5: + DECODE_PRINTF("CH"); + return &M.x86.R_CH; + case 6: + DECODE_PRINTF("DH"); + return &M.x86.R_DH; + case 7: + DECODE_PRINTF("BH"); + return &M.x86.R_BH; + } + HALT_SYS(); + return NULL; /* NOT REACHED OR REACHED ON ERROR */ +} + +/**************************************************************************** +PARAMETERS: +reg - Register to decode + +RETURNS: +Pointer to the appropriate register + +REMARKS: +Return a pointer to the register given by the R/RM field of the +modrm byte, for word operands. Also enables the decoding of instructions. +****************************************************************************/ +u16* decode_rm_word_register( + int reg) +{ + switch (reg) { + case 0: + DECODE_PRINTF("AX"); + return &M.x86.R_AX; + case 1: + DECODE_PRINTF("CX"); + return &M.x86.R_CX; + case 2: + DECODE_PRINTF("DX"); + return &M.x86.R_DX; + case 3: + DECODE_PRINTF("BX"); + return &M.x86.R_BX; + case 4: + DECODE_PRINTF("SP"); + return &M.x86.R_SP; + case 5: + DECODE_PRINTF("BP"); + return &M.x86.R_BP; + case 6: + DECODE_PRINTF("SI"); + return &M.x86.R_SI; + case 7: + DECODE_PRINTF("DI"); + return &M.x86.R_DI; + } + HALT_SYS(); + return NULL; /* NOTREACHED OR REACHED ON ERROR */ +} + +/**************************************************************************** +PARAMETERS: +reg - Register to decode + +RETURNS: +Pointer to the appropriate register + +REMARKS: +Return a pointer to the register given by the R/RM field of the +modrm byte, for dword operands. Also enables the decoding of instructions. +****************************************************************************/ +u32* decode_rm_long_register( + int reg) +{ + switch (reg) { + case 0: + DECODE_PRINTF("EAX"); + return &M.x86.R_EAX; + case 1: + DECODE_PRINTF("ECX"); + return &M.x86.R_ECX; + case 2: + DECODE_PRINTF("EDX"); + return &M.x86.R_EDX; + case 3: + DECODE_PRINTF("EBX"); + return &M.x86.R_EBX; + case 4: + DECODE_PRINTF("ESP"); + return &M.x86.R_ESP; + case 5: + DECODE_PRINTF("EBP"); + return &M.x86.R_EBP; + case 6: + DECODE_PRINTF("ESI"); + return &M.x86.R_ESI; + case 7: + DECODE_PRINTF("EDI"); + return &M.x86.R_EDI; + } + HALT_SYS(); + return NULL; /* NOTREACHED OR REACHED ON ERROR */ +} + +/**************************************************************************** +PARAMETERS: +reg - Register to decode + +RETURNS: +Pointer to the appropriate register + +REMARKS: +Return a pointer to the register given by the R/RM field of the +modrm byte, for word operands, modified from above for the weirdo +special case of segreg operands. Also enables the decoding of instructions. +****************************************************************************/ +u16* decode_rm_seg_register( + int reg) +{ + switch (reg) { + case 0: + DECODE_PRINTF("ES"); + return &M.x86.R_ES; + case 1: + DECODE_PRINTF("CS"); + return &M.x86.R_CS; + case 2: + DECODE_PRINTF("SS"); + return &M.x86.R_SS; + case 3: + DECODE_PRINTF("DS"); + return &M.x86.R_DS; + case 4: + DECODE_PRINTF("FS"); + return &M.x86.R_FS; + case 5: + DECODE_PRINTF("GS"); + return &M.x86.R_GS; + case 6: + case 7: + DECODE_PRINTF("ILLEGAL SEGREG"); + break; + } + HALT_SYS(); + return NULL; /* NOT REACHED OR REACHED ON ERROR */ +} + +/**************************************************************************** +PARAMETERS: +scale - scale value of SIB byte +index - index value of SIB byte + +RETURNS: +Value of scale * index + +REMARKS: +Decodes scale/index of SIB byte and returns relevant offset part of +effective address. +****************************************************************************/ +unsigned decode_sib_si( + int scale, + int index) +{ + scale = 1 << scale; + if (scale > 1) { + DECODE_PRINTF2("[%d*", scale); + } else { + DECODE_PRINTF("["); + } + switch (index) { + case 0: + DECODE_PRINTF("EAX]"); + return M.x86.R_EAX * index; + case 1: + DECODE_PRINTF("ECX]"); + return M.x86.R_ECX * index; + case 2: + DECODE_PRINTF("EDX]"); + return M.x86.R_EDX * index; + case 3: + DECODE_PRINTF("EBX]"); + return M.x86.R_EBX * index; + case 4: + DECODE_PRINTF("0]"); + return 0; + case 5: + DECODE_PRINTF("EBP]"); + return M.x86.R_EBP * index; + case 6: + DECODE_PRINTF("ESI]"); + return M.x86.R_ESI * index; + case 7: + DECODE_PRINTF("EDI]"); + return M.x86.R_EDI * index; + } + HALT_SYS(); + return 0; /* NOT REACHED OR REACHED ON ERROR */ +} + +/**************************************************************************** +PARAMETERS: +mod - MOD value of preceding ModR/M byte + +RETURNS: +Offset in memory for the address decoding + +REMARKS: +Decodes SIB addressing byte and returns calculated effective address. +****************************************************************************/ +unsigned decode_sib_address( + int mod) +{ + int sib = fetch_byte_imm(); + int ss = (sib >> 6) & 0x03; + int index = (sib >> 3) & 0x07; + int base = sib & 0x07; + int offset = 0; + int displacement; + + switch (base) { + case 0: + DECODE_PRINTF("[EAX]"); + offset = M.x86.R_EAX; + break; + case 1: + DECODE_PRINTF("[ECX]"); + offset = M.x86.R_ECX; + break; + case 2: + DECODE_PRINTF("[EDX]"); + offset = M.x86.R_EDX; + break; + case 3: + DECODE_PRINTF("[EBX]"); + offset = M.x86.R_EBX; + break; + case 4: + DECODE_PRINTF("[ESP]"); + offset = M.x86.R_ESP; + break; + case 5: + switch (mod) { + case 0: + displacement = (s32)fetch_long_imm(); + DECODE_PRINTF2("[%d]", displacement); + offset = displacement; + break; + case 1: + displacement = (s8)fetch_byte_imm(); + DECODE_PRINTF2("[%d][EBP]", displacement); + offset = M.x86.R_EBP + displacement; + break; + case 2: + displacement = (s32)fetch_long_imm(); + DECODE_PRINTF2("[%d][EBP]", displacement); + offset = M.x86.R_EBP + displacement; + break; + default: + HALT_SYS(); + } + DECODE_PRINTF("[EAX]"); + offset = M.x86.R_EAX; + break; + case 6: + DECODE_PRINTF("[ESI]"); + offset = M.x86.R_ESI; + break; + case 7: + DECODE_PRINTF("[EDI]"); + offset = M.x86.R_EDI; + break; + default: + HALT_SYS(); + } + offset += decode_sib_si(ss, index); + return offset; + +} + +/**************************************************************************** +PARAMETERS: +rm - RM value to decode + +RETURNS: +Offset in memory for the address decoding + +REMARKS: +Return the offset given by mod=00 addressing. Also enables the +decoding of instructions. + +NOTE: The code which specifies the corresponding segment (ds vs ss) + below in the case of [BP+..]. The assumption here is that at the + point that this subroutine is called, the bit corresponding to + SYSMODE_SEG_DS_SS will be zero. After every instruction + except the segment override instructions, this bit (as well + as any bits indicating segment overrides) will be clear. So + if a SS access is needed, set this bit. Otherwise, DS access + occurs (unless any of the segment override bits are set). +****************************************************************************/ +unsigned decode_rm00_address( + int rm) +{ + unsigned offset; + + if (M.x86.mode & SYSMODE_PREFIX_ADDR) { + /* 32-bit addressing */ + switch (rm) { + case 0: + DECODE_PRINTF("[EAX]"); + return M.x86.R_EAX; + case 1: + DECODE_PRINTF("[ECX]"); + return M.x86.R_ECX; + case 2: + DECODE_PRINTF("[EDX]"); + return M.x86.R_EDX; + case 3: + DECODE_PRINTF("[EBX]"); + return M.x86.R_EBX; + case 4: + return decode_sib_address(0); + case 5: + offset = fetch_long_imm(); + DECODE_PRINTF2("[%08x]", offset); + return offset; + case 6: + DECODE_PRINTF("[ESI]"); + return M.x86.R_ESI; + case 7: + DECODE_PRINTF("[EDI]"); + return M.x86.R_EDI; + } + } else { + /* 16-bit addressing */ + switch (rm) { + case 0: + DECODE_PRINTF("[BX+SI]"); + return (M.x86.R_BX + M.x86.R_SI) & 0xffff; + case 1: + DECODE_PRINTF("[BX+DI]"); + return (M.x86.R_BX + M.x86.R_DI) & 0xffff; + case 2: + DECODE_PRINTF("[BP+SI]"); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_SI) & 0xffff; + case 3: + DECODE_PRINTF("[BP+DI]"); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_DI) & 0xffff; + case 4: + DECODE_PRINTF("[SI]"); + return M.x86.R_SI; + case 5: + DECODE_PRINTF("[DI]"); + return M.x86.R_DI; + case 6: + offset = fetch_word_imm(); + DECODE_PRINTF2("[%04x]", offset); + return offset; + case 7: + DECODE_PRINTF("[BX]"); + return M.x86.R_BX; + } + } + HALT_SYS(); + return 0; +} + +/**************************************************************************** +PARAMETERS: +rm - RM value to decode + +RETURNS: +Offset in memory for the address decoding + +REMARKS: +Return the offset given by mod=01 addressing. Also enables the +decoding of instructions. +****************************************************************************/ +unsigned decode_rm01_address( + int rm) +{ + int displacement; + + if (M.x86.mode & SYSMODE_PREFIX_ADDR) { + /* 32-bit addressing */ + if (rm != 4) + displacement = (s8)fetch_byte_imm(); + else + displacement = 0; + + switch (rm) { + case 0: + DECODE_PRINTF2("%d[EAX]", displacement); + return M.x86.R_EAX + displacement; + case 1: + DECODE_PRINTF2("%d[ECX]", displacement); + return M.x86.R_ECX + displacement; + case 2: + DECODE_PRINTF2("%d[EDX]", displacement); + return M.x86.R_EDX + displacement; + case 3: + DECODE_PRINTF2("%d[EBX]", displacement); + return M.x86.R_EBX + displacement; + case 4: { + int offset = decode_sib_address(1); + displacement = (s8)fetch_byte_imm(); + DECODE_PRINTF2("[%d]", displacement); + return offset + displacement; + } + case 5: + DECODE_PRINTF2("%d[EBP]", displacement); + return M.x86.R_EBP + displacement; + case 6: + DECODE_PRINTF2("%d[ESI]", displacement); + return M.x86.R_ESI + displacement; + case 7: + DECODE_PRINTF2("%d[EDI]", displacement); + return M.x86.R_EDI + displacement; + } + } else { + /* 16-bit addressing */ + displacement = (s8)fetch_byte_imm(); + switch (rm) { + case 0: + DECODE_PRINTF2("%d[BX+SI]", displacement); + return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff; + case 1: + DECODE_PRINTF2("%d[BX+DI]", displacement); + return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff; + case 2: + DECODE_PRINTF2("%d[BP+SI]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff; + case 3: + DECODE_PRINTF2("%d[BP+DI]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff; + case 4: + DECODE_PRINTF2("%d[SI]", displacement); + return (M.x86.R_SI + displacement) & 0xffff; + case 5: + DECODE_PRINTF2("%d[DI]", displacement); + return (M.x86.R_DI + displacement) & 0xffff; + case 6: + DECODE_PRINTF2("%d[BP]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + displacement) & 0xffff; + case 7: + DECODE_PRINTF2("%d[BX]", displacement); + return (M.x86.R_BX + displacement) & 0xffff; + } + } + HALT_SYS(); + return 0; /* SHOULD NOT HAPPEN */ +} + +/**************************************************************************** +PARAMETERS: +rm - RM value to decode + +RETURNS: +Offset in memory for the address decoding + +REMARKS: +Return the offset given by mod=10 addressing. Also enables the +decoding of instructions. +****************************************************************************/ +unsigned decode_rm10_address( + int rm) +{ + if (M.x86.mode & SYSMODE_PREFIX_ADDR) { + int displacement; + + /* 32-bit addressing */ + if (rm != 4) + displacement = (s32)fetch_long_imm(); + else + displacement = 0; + + switch (rm) { + case 0: + DECODE_PRINTF2("%d[EAX]", displacement); + return M.x86.R_EAX + displacement; + case 1: + DECODE_PRINTF2("%d[ECX]", displacement); + return M.x86.R_ECX + displacement; + case 2: + DECODE_PRINTF2("%d[EDX]", displacement); + return M.x86.R_EDX + displacement; + case 3: + DECODE_PRINTF2("%d[EBX]", displacement); + return M.x86.R_EBX + displacement; + case 4: { + int offset = decode_sib_address(2); + displacement = (s32)fetch_long_imm(); + DECODE_PRINTF2("[%d]", displacement); + return offset + displacement; + } + case 5: + DECODE_PRINTF2("%d[EBP]", displacement); + return M.x86.R_EBP + displacement; + case 6: + DECODE_PRINTF2("%d[ESI]", displacement); + return M.x86.R_ESI + displacement; + case 7: + DECODE_PRINTF2("%d[EDI]", displacement); + return M.x86.R_EDI + displacement; + } + } else { + int displacement = (s16)fetch_word_imm(); + + /* 16-bit addressing */ + switch (rm) { + case 0: + DECODE_PRINTF2("%d[BX+SI]", displacement); + return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff; + case 1: + DECODE_PRINTF2("%d[BX+DI]", displacement); + return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff; + case 2: + DECODE_PRINTF2("%d[BP+SI]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff; + case 3: + DECODE_PRINTF2("%d[BP+DI]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff; + case 4: + DECODE_PRINTF2("%d[SI]", displacement); + return (M.x86.R_SI + displacement) & 0xffff; + case 5: + DECODE_PRINTF2("%d[DI]", displacement); + return (M.x86.R_DI + displacement) & 0xffff; + case 6: + DECODE_PRINTF2("%d[BP]", displacement); + M.x86.mode |= SYSMODE_SEG_DS_SS; + return (M.x86.R_BP + displacement) & 0xffff; + case 7: + DECODE_PRINTF2("%d[BX]", displacement); + return (M.x86.R_BX + displacement) & 0xffff; + } + } + HALT_SYS(); + return 0; /* SHOULD NOT HAPPEN */ +} + + +/**************************************************************************** +PARAMETERS: +mod - modifier +rm - RM value to decode + +RETURNS: +Offset in memory for the address decoding, multiplexing calls to +the decode_rmXX_address functions + +REMARKS: +Return the offset given by "mod" addressing. +****************************************************************************/ + +unsigned decode_rmXX_address(int mod, int rm) +{ + if(mod == 0) + return decode_rm00_address(rm); + if(mod == 1) + return decode_rm01_address(rm); + return decode_rm10_address(rm); +} + + + diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c new file mode 100644 index 0000000..632979d --- /dev/null +++ b/drivers/bios_emulator/x86emu/ops.c @@ -0,0 +1,5431 @@ +/**************************************************************************** +* Realmode X86 Emulator Library +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file includes subroutines to implement the decoding +* and emulation of all the x86 processor instructions. +* +* There are approximately 250 subroutines in here, which correspond +* to the 256 byte-"opcodes" found on the 8086. The table which +* dispatches this is found in the files optab.[ch]. +* +* Each opcode proc has a comment preceeding it which gives it's table +* address. Several opcodes are missing (undefined) in the table. +* +* Each proc includes information for decoding (DECODE_PRINTF and +* DECODE_PRINTF2), debugging (TRACE_REGS, SINGLE_STEP), and misc +* functions (START_OF_INSTR, END_OF_INSTR). +* +* Many of the procedures are *VERY* similar in coding. This has +* allowed for a very large amount of code to be generated in a fairly +* short amount of time (i.e. cut, paste, and modify). The result is +* that much of the code below could have been folded into subroutines +* for a large reduction in size of this file. The downside would be +* that there would be a penalty in execution speed. The file could +* also have been *MUCH* larger by inlining certain functions which +* were called. This could have resulted even faster execution. The +* prime directive I used to decide whether to inline the code or to +* modularize it, was basically: 1) no unnecessary subroutine calls, +* 2) no routines more than about 200 lines in size, and 3) modularize +* any code that I might not get right the first time. The fetch_* +* subroutines fall into the latter category. The The decode_* fall +* into the second category. The coding of the "switch(mod){ .... }" +* in many of the subroutines below falls into the first category. +* Especially, the coding of {add,and,or,sub,...}_{byte,word} +* subroutines are an especially glaring case of the third guideline. +* Since so much of the code is cloned from other modules (compare +* opcode #00 to opcode #01), making the basic operations subroutine +* calls is especially important; otherwise mistakes in coding an +* "add" would represent a nightmare in maintenance. +* +* Jason ported this file to u-boot. place all the function pointer in +* the got2 sector. Removed some opcode. +* +****************************************************************************/ + +#include "x86emu/x86emui.h" +/*----------------------------- Implementation ----------------------------*/ + +/* constant arrays to do several instructions in just one function */ + +#ifdef DEBUG +static char *x86emu_GenOpName[8] = { + "ADD", "OR", "ADC", "SBB", "AND", "SUB", "XOR", "CMP"}; +#endif + +/* used by several opcodes */ +static u8 (*genop_byte_operation[])(u8 d, u8 s) __attribute__ ((section(".got2"))) = +{ + add_byte, /* 00 */ + or_byte, /* 01 */ + adc_byte, /* 02 */ + sbb_byte, /* 03 */ + and_byte, /* 04 */ + sub_byte, /* 05 */ + xor_byte, /* 06 */ + cmp_byte, /* 07 */ +}; + +static u16 (*genop_word_operation[])(u16 d, u16 s) __attribute__ ((section(".got2"))) = +{ + add_word, /*00 */ + or_word, /*01 */ + adc_word, /*02 */ + sbb_word, /*03 */ + and_word, /*04 */ + sub_word, /*05 */ + xor_word, /*06 */ + cmp_word, /*07 */ +}; + +static u32 (*genop_long_operation[])(u32 d, u32 s) __attribute__ ((section(".got2"))) = +{ + add_long, /*00 */ + or_long, /*01 */ + adc_long, /*02 */ + sbb_long, /*03 */ + and_long, /*04 */ + sub_long, /*05 */ + xor_long, /*06 */ + cmp_long, /*07 */ +}; + +/* used by opcodes 80, c0, d0, and d2. */ +static u8(*opcD0_byte_operation[])(u8 d, u8 s) __attribute__ ((section(".got2"))) = +{ + rol_byte, + ror_byte, + rcl_byte, + rcr_byte, + shl_byte, + shr_byte, + shl_byte, /* sal_byte === shl_byte by definition */ + sar_byte, +}; + +/* used by opcodes c1, d1, and d3. */ +static u16(*opcD1_word_operation[])(u16 s, u8 d) __attribute__ ((section(".got2"))) = +{ + rol_word, + ror_word, + rcl_word, + rcr_word, + shl_word, + shr_word, + shl_word, /* sal_byte === shl_byte by definition */ + sar_word, +}; + +/* used by opcodes c1, d1, and d3. */ +static u32 (*opcD1_long_operation[])(u32 s, u8 d) __attribute__ ((section(".got2"))) = +{ + rol_long, + ror_long, + rcl_long, + rcr_long, + shl_long, + shr_long, + shl_long, /* sal_byte === shl_byte by definition */ + sar_long, +}; + +#ifdef DEBUG + +static char *opF6_names[8] = + { "TEST\t", "", "NOT\t", "NEG\t", "MUL\t", "IMUL\t", "DIV\t", "IDIV\t" }; + +#endif + +/**************************************************************************** +PARAMETERS: +op1 - Instruction op code + +REMARKS: +Handles illegal opcodes. +****************************************************************************/ +void x86emuOp_illegal_op( + u8 op1) +{ + START_OF_INSTR(); + if (M.x86.R_SP != 0) { + DECODE_PRINTF("ILLEGAL X86 OPCODE\n"); + TRACE_REGS(); + DB( printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n", + M.x86.R_CS, M.x86.R_IP-1,op1)); + HALT_SYS(); + } + else { + /* If we get here, it means the stack pointer is back to zero + * so we are just returning from an emulator service call + * so therte is no need to display an error message. We trap + * the emulator with an 0xF1 opcode to finish the service + * call. + */ + X86EMU_halt_sys(); + } + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x00, 0x08, 0x10, 0x18, 0x20, 0x28, 0x30, 0x38 +****************************************************************************/ +void x86emuOp_genop_byte_RM_R(u8 op1) +{ + int mod, rl, rh; + uint destoffset; + u8 *destreg, *srcreg; + u8 destval; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if(mod<3) + { destoffset = decode_rmXX_address(mod,rl); + DECODE_PRINTF(","); + destval = fetch_data_byte(destoffset); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = genop_byte_operation[op1](destval, *srcreg); + store_data_byte(destoffset, destval); + } + else + { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_byte_operation[op1](*destreg, *srcreg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x01, 0x09, 0x11, 0x19, 0x21, 0x29, 0x31, 0x39 +****************************************************************************/ +void x86emuOp_genop_word_RM_R(u8 op1) +{ + int mod, rl, rh; + uint destoffset; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + + if(mod<3) { + destoffset = decode_rmXX_address(mod,rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *srcreg; + + DECODE_PRINTF(","); + destval = fetch_data_long(destoffset); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = genop_long_operation[op1](destval, *srcreg); + store_data_long(destoffset, destval); + } else { + u16 destval; + u16 *srcreg; + + DECODE_PRINTF(","); + destval = fetch_data_word(destoffset); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = genop_word_operation[op1](destval, *srcreg); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_long_operation[op1](*destreg, *srcreg); + } else { + u16 *destreg,*srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_word_operation[op1](*destreg, *srcreg); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x02, 0x0a, 0x12, 0x1a, 0x22, 0x2a, 0x32, 0x3a +****************************************************************************/ +void x86emuOp_genop_byte_R_RM(u8 op1) +{ + int mod, rl, rh; + u8 *destreg, *srcreg; + uint srcoffset; + u8 srcval; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod,rl); + srcval = fetch_data_byte(srcoffset); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + srcval = *srcreg; + } + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_byte_operation[op1](*destreg, srcval); + + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x03, 0x0b, 0x13, 0x1b, 0x23, 0x2b, 0x33, 0x3b +****************************************************************************/ +void x86emuOp_genop_word_R_RM(u8 op1) +{ + int mod, rl, rh; + uint srcoffset; + u32 *destreg32, srcval; + u16 *destreg; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod,rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + destreg32 = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_long(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg32 = genop_long_operation[op1](*destreg32, srcval); + } else { + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_word(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_word_operation[op1](*destreg, srcval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg; + destreg32 = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg32 = genop_long_operation[op1](*destreg32, *srcreg); + } else { + u16 *srcreg; + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = genop_word_operation[op1](*destreg, *srcreg); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x04, 0x0c, 0x14, 0x1c, 0x24, 0x2c, 0x34, 0x3c +****************************************************************************/ +void x86emuOp_genop_byte_AL_IMM(u8 op1) +{ + u8 srcval; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\tAL,"); + srcval = fetch_byte_imm(); + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + M.x86.R_AL = genop_byte_operation[op1](M.x86.R_AL, srcval); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcodes 0x05, 0x0d, 0x15, 0x1d, 0x25, 0x2d, 0x35, 0x3d +****************************************************************************/ +void x86emuOp_genop_word_AX_IMM(u8 op1) +{ + u32 srcval; + + op1 = (op1 >> 3) & 0x7; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\tEAX,"); + srcval = fetch_long_imm(); + } else { + DECODE_PRINTF(x86emu_GenOpName[op1]); + DECODE_PRINTF("\tAX,"); + srcval = fetch_word_imm(); + } + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EAX = genop_long_operation[op1](M.x86.R_EAX, srcval); + } else { + M.x86.R_AX = genop_word_operation[op1](M.x86.R_AX, (u16)srcval); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x06 +****************************************************************************/ +void x86emuOp_push_ES(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tES\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_ES); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x07 +****************************************************************************/ +void x86emuOp_pop_ES(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("POP\tES\n"); + TRACE_AND_STEP(); + M.x86.R_ES = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0e +****************************************************************************/ +void x86emuOp_push_CS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tCS\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_CS); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f. Escape for two-byte opcode (286 or better) +****************************************************************************/ +void x86emuOp_two_byte(u8 X86EMU_UNUSED(op1)) +{ + u8 op2 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++)); + INC_DECODED_INST_LEN(1); + (*x86emu_optab2[op2])(op2); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x16 +****************************************************************************/ +void x86emuOp_push_SS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tSS\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_SS); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x17 +****************************************************************************/ +void x86emuOp_pop_SS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("POP\tSS\n"); + TRACE_AND_STEP(); + M.x86.R_SS = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x1e +****************************************************************************/ +void x86emuOp_push_DS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tDS\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_DS); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x1f +****************************************************************************/ +void x86emuOp_pop_DS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("POP\tDS\n"); + TRACE_AND_STEP(); + M.x86.R_DS = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x26 +****************************************************************************/ +void x86emuOp_segovr_ES(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("ES:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_ES; + /* + * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4 + * opcode subroutines we do not want to do this. + */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x27 +****************************************************************************/ +void x86emuOp_daa(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("DAA\n"); + TRACE_AND_STEP(); + M.x86.R_AL = daa_byte(M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x2e +****************************************************************************/ +void x86emuOp_segovr_CS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("CS:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_CS; + /* note no DECODE_CLEAR_SEGOVR here. */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x2f +****************************************************************************/ +void x86emuOp_das(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("DAS\n"); + TRACE_AND_STEP(); + M.x86.R_AL = das_byte(M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x36 +****************************************************************************/ +void x86emuOp_segovr_SS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("SS:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_SS; + /* no DECODE_CLEAR_SEGOVR ! */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x37 +****************************************************************************/ +void x86emuOp_aaa(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("AAA\n"); + TRACE_AND_STEP(); + M.x86.R_AX = aaa_word(M.x86.R_AX); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x3e +****************************************************************************/ +void x86emuOp_segovr_DS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("DS:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_DS; + /* NO DECODE_CLEAR_SEGOVR! */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x3f +****************************************************************************/ +void x86emuOp_aas(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("AAS\n"); + TRACE_AND_STEP(); + M.x86.R_AX = aas_word(M.x86.R_AX); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x40 - 0x47 +****************************************************************************/ +void x86emuOp_inc_register(u8 op1) +{ + START_OF_INSTR(); + op1 &= 0x7; + DECODE_PRINTF("INC\t"); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg; + reg = DECODE_RM_LONG_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = inc_long(*reg); + } else { + u16 *reg; + reg = DECODE_RM_WORD_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = inc_word(*reg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x48 - 0x4F +****************************************************************************/ +void x86emuOp_dec_register(u8 op1) +{ + START_OF_INSTR(); + op1 &= 0x7; + DECODE_PRINTF("DEC\t"); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg; + reg = DECODE_RM_LONG_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = dec_long(*reg); + } else { + u16 *reg; + reg = DECODE_RM_WORD_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = dec_word(*reg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x50 - 0x57 +****************************************************************************/ +void x86emuOp_push_register(u8 op1) +{ + START_OF_INSTR(); + op1 &= 0x7; + DECODE_PRINTF("PUSH\t"); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg; + reg = DECODE_RM_LONG_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + push_long(*reg); + } else { + u16 *reg; + reg = DECODE_RM_WORD_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + push_word(*reg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x58 - 0x5F +****************************************************************************/ +void x86emuOp_pop_register(u8 op1) +{ + START_OF_INSTR(); + op1 &= 0x7; + DECODE_PRINTF("POP\t"); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg; + reg = DECODE_RM_LONG_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = pop_long(); + } else { + u16 *reg; + reg = DECODE_RM_WORD_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *reg = pop_word(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x60 +****************************************************************************/ +void x86emuOp_push_all(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("PUSHAD\n"); + } else { + DECODE_PRINTF("PUSHA\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 old_sp = M.x86.R_ESP; + + push_long(M.x86.R_EAX); + push_long(M.x86.R_ECX); + push_long(M.x86.R_EDX); + push_long(M.x86.R_EBX); + push_long(old_sp); + push_long(M.x86.R_EBP); + push_long(M.x86.R_ESI); + push_long(M.x86.R_EDI); + } else { + u16 old_sp = M.x86.R_SP; + + push_word(M.x86.R_AX); + push_word(M.x86.R_CX); + push_word(M.x86.R_DX); + push_word(M.x86.R_BX); + push_word(old_sp); + push_word(M.x86.R_BP); + push_word(M.x86.R_SI); + push_word(M.x86.R_DI); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x61 +****************************************************************************/ +void x86emuOp_pop_all(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("POPAD\n"); + } else { + DECODE_PRINTF("POPA\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EDI = pop_long(); + M.x86.R_ESI = pop_long(); + M.x86.R_EBP = pop_long(); + M.x86.R_ESP += 4; /* skip ESP */ + M.x86.R_EBX = pop_long(); + M.x86.R_EDX = pop_long(); + M.x86.R_ECX = pop_long(); + M.x86.R_EAX = pop_long(); + } else { + M.x86.R_DI = pop_word(); + M.x86.R_SI = pop_word(); + M.x86.R_BP = pop_word(); + M.x86.R_SP += 2; /* skip SP */ + M.x86.R_BX = pop_word(); + M.x86.R_DX = pop_word(); + M.x86.R_CX = pop_word(); + M.x86.R_AX = pop_word(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/*opcode 0x62 ILLEGAL OP, calls x86emuOp_illegal_op() */ +/*opcode 0x63 ILLEGAL OP, calls x86emuOp_illegal_op() */ + +/**************************************************************************** +REMARKS: +Handles opcode 0x64 +****************************************************************************/ +void x86emuOp_segovr_FS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("FS:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_FS; + /* + * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4 + * opcode subroutines we do not want to do this. + */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x65 +****************************************************************************/ +void x86emuOp_segovr_GS(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("GS:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_SEGOVR_GS; + /* + * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4 + * opcode subroutines we do not want to do this. + */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x66 - prefix for 32-bit register +****************************************************************************/ +void x86emuOp_prefix_data(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("DATA:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_PREFIX_DATA; + /* note no DECODE_CLEAR_SEGOVR here. */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x67 - prefix for 32-bit address +****************************************************************************/ +void x86emuOp_prefix_addr(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("ADDR:\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_PREFIX_ADDR; + /* note no DECODE_CLEAR_SEGOVR here. */ + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x68 +****************************************************************************/ +void x86emuOp_push_word_IMM(u8 X86EMU_UNUSED(op1)) +{ + u32 imm; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + imm = fetch_long_imm(); + } else { + imm = fetch_word_imm(); + } + DECODE_PRINTF2("PUSH\t%x\n", imm); + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + push_long(imm); + } else { + push_word((u16)imm); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x69 +****************************************************************************/ +void x86emuOp_imul_word_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("IMUL\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + u32 res_lo,res_hi; + s32 imm; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_long(srcoffset); + imm = fetch_long_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm); + if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) || + (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg; + u16 srcval; + u32 res; + s16 imm; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_word(srcoffset); + imm = fetch_word_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + res = (s16)srcval * (s16)imm; + if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) || + (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u16)res; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + u32 res_lo,res_hi; + s32 imm; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rl); + imm = fetch_long_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm); + if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) || + (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg,*srcreg; + u32 res; + s16 imm; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + imm = fetch_word_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + res = (s16)*srcreg * (s16)imm; + if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) || + (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u16)res; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6a +****************************************************************************/ +void x86emuOp_push_byte_IMM(u8 X86EMU_UNUSED(op1)) +{ + s16 imm; + + START_OF_INSTR(); + imm = (s8)fetch_byte_imm(); + DECODE_PRINTF2("PUSH\t%d\n", imm); + TRACE_AND_STEP(); + push_word(imm); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6b +****************************************************************************/ +void x86emuOp_imul_byte_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint srcoffset; + s8 imm; + + START_OF_INSTR(); + DECODE_PRINTF("IMUL\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + u32 res_lo,res_hi; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_long(srcoffset); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm); + if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) || + (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg; + u16 srcval; + u32 res; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcval = fetch_data_word(srcoffset); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + res = (s16)srcval * (s16)imm; + if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) || + (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u16)res; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + u32 res_lo,res_hi; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rl); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm); + if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) || + (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg,*srcreg; + u32 res; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", (s32)imm); + TRACE_AND_STEP(); + res = (s16)*srcreg * (s16)imm; + if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) || + (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } + *destreg = (u16)res; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6c +****************************************************************************/ +void x86emuOp_ins_byte(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("INSB\n"); + ins(1); + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6d +****************************************************************************/ +void x86emuOp_ins_word(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("INSD\n"); + ins(4); + } else { + DECODE_PRINTF("INSW\n"); + ins(2); + } + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6e +****************************************************************************/ +void x86emuOp_outs_byte(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("OUTSB\n"); + outs(1); + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x6f +****************************************************************************/ +void x86emuOp_outs_word(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("OUTSD\n"); + outs(4); + } else { + DECODE_PRINTF("OUTSW\n"); + outs(2); + } + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x70 - 0x7F +****************************************************************************/ +int x86emu_check_jump_condition(u8 op); + +void x86emuOp_jump_near_cond(u8 op1) +{ + s8 offset; + u16 target; + int cond; + + /* jump to byte offset if overflow flag is set */ + START_OF_INSTR(); + cond = x86emu_check_jump_condition(op1 & 0xF); + offset = (s8)fetch_byte_imm(); + target = (u16)(M.x86.R_IP + (s16)offset); + DECODE_PRINTF2("%x\n", target); + TRACE_AND_STEP(); + if (cond) + M.x86.R_IP = target; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x80 +****************************************************************************/ +void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 imm; + u8 destval; + + /* + * Weirdo special case instruction format. Part of the opcode + * held below in "RH". Doubly nested case would result, except + * that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + DECODE_PRINTF("ADD\t"); + break; + case 1: + DECODE_PRINTF("OR\t"); + break; + case 2: + DECODE_PRINTF("ADC\t"); + break; + case 3: + DECODE_PRINTF("SBB\t"); + break; + case 4: + DECODE_PRINTF("AND\t"); + break; + case 5: + DECODE_PRINTF("SUB\t"); + break; + case 6: + DECODE_PRINTF("XOR\t"); + break; + case 7: + DECODE_PRINTF("CMP\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + destval = fetch_data_byte(destoffset); + imm = fetch_byte_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_byte_operation[rh]) (destval, imm); + if (rh != 7) + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(","); + imm = fetch_byte_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_byte_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x81 +****************************************************************************/ +void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + /* + * Weirdo special case instruction format. Part of the opcode + * held below in "RH". Doubly nested case would result, except + * that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + DECODE_PRINTF("ADD\t"); + break; + case 1: + DECODE_PRINTF("OR\t"); + break; + case 2: + DECODE_PRINTF("ADC\t"); + break; + case 3: + DECODE_PRINTF("SBB\t"); + break; + case 4: + DECODE_PRINTF("AND\t"); + break; + case 5: + DECODE_PRINTF("SUB\t"); + break; + case 6: + DECODE_PRINTF("XOR\t"); + break; + case 7: + DECODE_PRINTF("CMP\t"); + break; + } + } +#endif + /* + * Know operation, decode the mod byte to find the addressing + * mode. + */ + if (mod < 3) { + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval,imm; + + DECODE_PRINTF(","); + destval = fetch_data_long(destoffset); + imm = fetch_long_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_long_operation[rh]) (destval, imm); + if (rh != 7) + store_data_long(destoffset, destval); + } else { + u16 destval,imm; + + DECODE_PRINTF(","); + destval = fetch_data_word(destoffset); + imm = fetch_word_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_word_operation[rh]) (destval, imm); + if (rh != 7) + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 destval,imm; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + imm = fetch_long_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_long_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } else { + u16 *destreg; + u16 destval,imm; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + imm = fetch_word_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_word_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x82 +****************************************************************************/ +void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 imm; + u8 destval; + + /* + * Weirdo special case instruction format. Part of the opcode + * held below in "RH". Doubly nested case would result, except + * that the decoded instruction Similar to opcode 81, except that + * the immediate byte is sign extended to a word length. + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ADD\t"); + break; + case 1: + DECODE_PRINTF("OR\t"); + break; + case 2: + DECODE_PRINTF("ADC\t"); + break; + case 3: + DECODE_PRINTF("SBB\t"); + break; + case 4: + DECODE_PRINTF("AND\t"); + break; + case 5: + DECODE_PRINTF("SUB\t"); + break; + case 6: + DECODE_PRINTF("XOR\t"); + break; + case 7: + DECODE_PRINTF("CMP\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + destval = fetch_data_byte(destoffset); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_byte_operation[rh]) (destval, imm); + if (rh != 7) + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_byte_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x83 +****************************************************************************/ +void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + /* + * Weirdo special case instruction format. Part of the opcode + * held below in "RH". Doubly nested case would result, except + * that the decoded instruction Similar to opcode 81, except that + * the immediate byte is sign extended to a word length. + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ADD\t"); + break; + case 1: + DECODE_PRINTF("OR\t"); + break; + case 2: + DECODE_PRINTF("ADC\t"); + break; + case 3: + DECODE_PRINTF("SBB\t"); + break; + case 4: + DECODE_PRINTF("AND\t"); + break; + case 5: + DECODE_PRINTF("SUB\t"); + break; + case 6: + DECODE_PRINTF("XOR\t"); + break; + case 7: + DECODE_PRINTF("CMP\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod,rl); + + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval,imm; + + destval = fetch_data_long(destoffset); + imm = (s8) fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_long_operation[rh]) (destval, imm); + if (rh != 7) + store_data_long(destoffset, destval); + } else { + u16 destval,imm; + + destval = fetch_data_word(destoffset); + imm = (s8) fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_word_operation[rh]) (destval, imm); + if (rh != 7) + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 destval,imm; + + destreg = DECODE_RM_LONG_REGISTER(rl); + imm = (s8) fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_long_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } else { + u16 *destreg; + u16 destval,imm; + + destreg = DECODE_RM_WORD_REGISTER(rl); + imm = (s8) fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + destval = (*genop_word_operation[rh]) (*destreg, imm); + if (rh != 7) + *destreg = destval; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x84 +****************************************************************************/ +void x86emuOp_test_byte_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg, *srcreg; + uint destoffset; + u8 destval; + + START_OF_INSTR(); + DECODE_PRINTF("TEST\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + destval = fetch_data_byte(destoffset); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_byte(destval, *srcreg); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_byte(*destreg, *srcreg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x85 +****************************************************************************/ +void x86emuOp_test_word_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("TEST\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *srcreg; + + DECODE_PRINTF(","); + destval = fetch_data_long(destoffset); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_long(destval, *srcreg); + } else { + u16 destval; + u16 *srcreg; + + DECODE_PRINTF(","); + destval = fetch_data_word(destoffset); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_word(destval, *srcreg); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_long(*destreg, *srcreg); + } else { + u16 *destreg,*srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + test_word(*destreg, *srcreg); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x86 +****************************************************************************/ +void x86emuOp_xchg_byte_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg, *srcreg; + uint destoffset; + u8 destval; + u8 tmp; + + START_OF_INSTR(); + DECODE_PRINTF("XCHG\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + destval = fetch_data_byte(destoffset); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = destval; + destval = tmp; + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = *destreg; + *destreg = tmp; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x87 +****************************************************************************/ +void x86emuOp_xchg_word_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("XCHG\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg; + u32 destval,tmp; + + destval = fetch_data_long(destoffset); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = destval; + destval = tmp; + store_data_long(destoffset, destval); + } else { + u16 *srcreg; + u16 destval,tmp; + + destval = fetch_data_word(destoffset); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = destval; + destval = tmp; + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + u32 tmp; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = *destreg; + *destreg = tmp; + } else { + u16 *destreg,*srcreg; + u16 tmp; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = *srcreg; + *srcreg = *destreg; + *destreg = tmp; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x88 +****************************************************************************/ +void x86emuOp_mov_byte_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg, *srcreg; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + store_data_byte(destoffset, *srcreg); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x89 +****************************************************************************/ +void x86emuOp_mov_word_RM_R(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg; + + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + store_data_long(destoffset, *srcreg); + } else { + u16 *srcreg; + + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + store_data_word(destoffset, *srcreg); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } else { + u16 *destreg,*srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8a +****************************************************************************/ +void x86emuOp_mov_byte_R_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg, *srcreg; + uint srcoffset; + u8 srcval; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_byte(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8b +****************************************************************************/ +void x86emuOp_mov_word_R_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_long(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { + u16 *destreg; + u16 srcval; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_word(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg, *srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } else { + u16 *destreg, *srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8c +****************************************************************************/ +void x86emuOp_mov_word_RM_SR(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u16 *destreg, *srcreg; + uint destoffset; + u16 destval; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + srcreg = decode_rm_seg_register(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = *srcreg; + store_data_word(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + srcreg = decode_rm_seg_register(rh); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8d +****************************************************************************/ +void x86emuOp_lea_word_R_M(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u16 *srcreg; + uint destoffset; + +/* + * TODO: Need to handle address size prefix! + * + * lea eax,[eax+ebx*2] ?? + */ + + START_OF_INSTR(); + DECODE_PRINTF("LEA\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *srcreg = (u16)destoffset; + } + /* } else { undefined. Do nothing. } */ + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8e +****************************************************************************/ +void x86emuOp_mov_word_SR_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u16 *destreg, *srcreg; + uint srcoffset; + u16 srcval; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destreg = decode_rm_seg_register(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_word(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { /* register to register */ + destreg = decode_rm_seg_register(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + /* + * Clean up, and reset all the R_xSP pointers to the correct + * locations. This is about 3x too much overhead (doing all the + * segreg ptrs when only one is needed, but this instruction + * *cannot* be that common, and this isn't too much work anyway. + */ + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x8f +****************************************************************************/ +void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("POP\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (rh != 0) { + DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + HALT_SYS(); + } + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = pop_long(); + store_data_long(destoffset, destval); + } else { + u16 destval; + + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = pop_word(); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = pop_long(); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = pop_word(); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x90 +****************************************************************************/ +void x86emuOp_nop(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("NOP\n"); + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x91-0x97 +****************************************************************************/ +void x86emuOp_xchg_word_AX_register(u8 X86EMU_UNUSED(op1)) +{ + u32 tmp; + + op1 &= 0x7; + + START_OF_INSTR(); + + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg32; + DECODE_PRINTF("XCHG\tEAX,"); + reg32 = DECODE_RM_LONG_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = M.x86.R_EAX; + M.x86.R_EAX = *reg32; + *reg32 = tmp; + } else { + u16 *reg16; + DECODE_PRINTF("XCHG\tAX,"); + reg16 = DECODE_RM_WORD_REGISTER(op1); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + tmp = M.x86.R_AX; + M.x86.R_EAX = *reg16; + *reg16 = (u16)tmp; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x98 +****************************************************************************/ +void x86emuOp_cbw(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("CWDE\n"); + } else { + DECODE_PRINTF("CBW\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + if (M.x86.R_AX & 0x8000) { + M.x86.R_EAX |= 0xffff0000; + } else { + M.x86.R_EAX &= 0x0000ffff; + } + } else { + if (M.x86.R_AL & 0x80) { + M.x86.R_AH = 0xff; + } else { + M.x86.R_AH = 0x0; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x99 +****************************************************************************/ +void x86emuOp_cwd(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("CDQ\n"); + } else { + DECODE_PRINTF("CWD\n"); + } + DECODE_PRINTF("CWD\n"); + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + if (M.x86.R_EAX & 0x80000000) { + M.x86.R_EDX = 0xffffffff; + } else { + M.x86.R_EDX = 0x0; + } + } else { + if (M.x86.R_AX & 0x8000) { + M.x86.R_DX = 0xffff; + } else { + M.x86.R_DX = 0x0; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9a +****************************************************************************/ +void x86emuOp_call_far_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 farseg, faroff; + + START_OF_INSTR(); + DECODE_PRINTF("CALL\t"); + faroff = fetch_word_imm(); + farseg = fetch_word_imm(); + DECODE_PRINTF2("%04x:", farseg); + DECODE_PRINTF2("%04x\n", faroff); + CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, farseg, faroff, "FAR "); + + /* XXX + * + * Hooked interrupt vectors calling into our "BIOS" will cause + * problems unless all intersegment stuff is checked for BIOS + * access. Check needed here. For moment, let it alone. + */ + TRACE_AND_STEP(); + push_word(M.x86.R_CS); + M.x86.R_CS = farseg; + push_word(M.x86.R_IP); + M.x86.R_IP = faroff; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9b +****************************************************************************/ +void x86emuOp_wait(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("WAIT"); + TRACE_AND_STEP(); + /* NADA. */ + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9c +****************************************************************************/ +void x86emuOp_pushf_word(u8 X86EMU_UNUSED(op1)) +{ + u32 flags; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("PUSHFD\n"); + } else { + DECODE_PRINTF("PUSHF\n"); + } + TRACE_AND_STEP(); + + /* clear out *all* bits not representing flags, and turn on real bits */ + flags = (M.x86.R_EFLG & F_MSK) | F_ALWAYS_ON; + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + push_long(flags); + } else { + push_word((u16)flags); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9d +****************************************************************************/ +void x86emuOp_popf_word(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("POPFD\n"); + } else { + DECODE_PRINTF("POPF\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EFLG = pop_long(); + } else { + M.x86.R_FLG = pop_word(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9e +****************************************************************************/ +void x86emuOp_sahf(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("SAHF\n"); + TRACE_AND_STEP(); + /* clear the lower bits of the flag register */ + M.x86.R_FLG &= 0xffffff00; + /* or in the AH register into the flags register */ + M.x86.R_FLG |= M.x86.R_AH; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x9f +****************************************************************************/ +void x86emuOp_lahf(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("LAHF\n"); + TRACE_AND_STEP(); + M.x86.R_AH = (u8)(M.x86.R_FLG & 0xff); + /*undocumented TC++ behavior??? Nope. It's documented, but + you have too look real hard to notice it. */ + M.x86.R_AH |= 0x2; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa0 +****************************************************************************/ +void x86emuOp_mov_AL_M_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 offset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\tAL,"); + offset = fetch_word_imm(); + DECODE_PRINTF2("[%04x]\n", offset); + TRACE_AND_STEP(); + M.x86.R_AL = fetch_data_byte(offset); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa1 +****************************************************************************/ +void x86emuOp_mov_AX_M_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 offset; + + START_OF_INSTR(); + offset = fetch_word_imm(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF2("MOV\tEAX,[%04x]\n", offset); + } else { + DECODE_PRINTF2("MOV\tAX,[%04x]\n", offset); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EAX = fetch_data_long(offset); + } else { + M.x86.R_AX = fetch_data_word(offset); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa2 +****************************************************************************/ +void x86emuOp_mov_M_AL_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 offset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + offset = fetch_word_imm(); + DECODE_PRINTF2("[%04x],AL\n", offset); + TRACE_AND_STEP(); + store_data_byte(offset, M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa3 +****************************************************************************/ +void x86emuOp_mov_M_AX_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 offset; + + START_OF_INSTR(); + offset = fetch_word_imm(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF2("MOV\t[%04x],EAX\n", offset); + } else { + DECODE_PRINTF2("MOV\t[%04x],AX\n", offset); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + store_data_long(offset, M.x86.R_EAX); + } else { + store_data_word(offset, M.x86.R_AX); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa4 +****************************************************************************/ +void x86emuOp_movs_byte(u8 X86EMU_UNUSED(op1)) +{ + u8 val; + u32 count; + int inc; + + START_OF_INSTR(); + DECODE_PRINTF("MOVS\tBYTE\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -1; + else + inc = 1; + TRACE_AND_STEP(); + count = 1; + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + count = M.x86.R_CX; + M.x86.R_CX = 0; + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } + while (count--) { + val = fetch_data_byte(M.x86.R_SI); + store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, val); + M.x86.R_SI += inc; + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa5 +****************************************************************************/ +void x86emuOp_movs_word(u8 X86EMU_UNUSED(op1)) +{ + u32 val; + int inc; + u32 count; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("MOVS\tDWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -4; + else + inc = 4; + } else { + DECODE_PRINTF("MOVS\tWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -2; + else + inc = 2; + } + TRACE_AND_STEP(); + count = 1; + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + count = M.x86.R_CX; + M.x86.R_CX = 0; + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } + while (count--) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val = fetch_data_long(M.x86.R_SI); + store_data_long_abs(M.x86.R_ES, M.x86.R_DI, val); + } else { + val = fetch_data_word(M.x86.R_SI); + store_data_word_abs(M.x86.R_ES, M.x86.R_DI, (u16)val); + } + M.x86.R_SI += inc; + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa6 +****************************************************************************/ +void x86emuOp_cmps_byte(u8 X86EMU_UNUSED(op1)) +{ + s8 val1, val2; + int inc; + + START_OF_INSTR(); + DECODE_PRINTF("CMPS\tBYTE\n"); + TRACE_AND_STEP(); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -1; + else + inc = 1; + + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* REPE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + val1 = fetch_data_byte(M.x86.R_SI); + val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI); + cmp_byte(val1, val2); + M.x86.R_CX -= 1; + M.x86.R_SI += inc; + M.x86.R_DI += inc; + if ( (M.x86.mode & SYSMODE_PREFIX_REPE) && (ACCESS_FLAG(F_ZF) == 0) ) break; + if ( (M.x86.mode & SYSMODE_PREFIX_REPNE) && ACCESS_FLAG(F_ZF) ) break; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + val1 = fetch_data_byte(M.x86.R_SI); + val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI); + cmp_byte(val1, val2); + M.x86.R_SI += inc; + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa7 +****************************************************************************/ +void x86emuOp_cmps_word(u8 X86EMU_UNUSED(op1)) +{ + u32 val1,val2; + int inc; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("CMPS\tDWORD\n"); + inc = 4; + } else { + DECODE_PRINTF("CMPS\tWORD\n"); + inc = 2; + } + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -inc; + + TRACE_AND_STEP(); + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* REPE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val1 = fetch_data_long(M.x86.R_SI); + val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI); + cmp_long(val1, val2); + } else { + val1 = fetch_data_word(M.x86.R_SI); + val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI); + cmp_word((u16)val1, (u16)val2); + } + M.x86.R_CX -= 1; + M.x86.R_SI += inc; + M.x86.R_DI += inc; + if ( (M.x86.mode & SYSMODE_PREFIX_REPE) && ACCESS_FLAG(F_ZF) == 0 ) break; + if ( (M.x86.mode & SYSMODE_PREFIX_REPNE) && ACCESS_FLAG(F_ZF) ) break; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val1 = fetch_data_long(M.x86.R_SI); + val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI); + cmp_long(val1, val2); + } else { + val1 = fetch_data_word(M.x86.R_SI); + val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI); + cmp_word((u16)val1, (u16)val2); + } + M.x86.R_SI += inc; + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa8 +****************************************************************************/ +void x86emuOp_test_AL_IMM(u8 X86EMU_UNUSED(op1)) +{ + int imm; + + START_OF_INSTR(); + DECODE_PRINTF("TEST\tAL,"); + imm = fetch_byte_imm(); + DECODE_PRINTF2("%04x\n", imm); + TRACE_AND_STEP(); + test_byte(M.x86.R_AL, (u8)imm); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xa9 +****************************************************************************/ +void x86emuOp_test_AX_IMM(u8 X86EMU_UNUSED(op1)) +{ + u32 srcval; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("TEST\tEAX,"); + srcval = fetch_long_imm(); + } else { + DECODE_PRINTF("TEST\tAX,"); + srcval = fetch_word_imm(); + } + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + test_long(M.x86.R_EAX, srcval); + } else { + test_word(M.x86.R_AX, (u16)srcval); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xaa +****************************************************************************/ +void x86emuOp_stos_byte(u8 X86EMU_UNUSED(op1)) +{ + int inc; + + START_OF_INSTR(); + DECODE_PRINTF("STOS\tBYTE\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -1; + else + inc = 1; + TRACE_AND_STEP(); + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL); + M.x86.R_CX -= 1; + M.x86.R_DI += inc; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL); + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xab +****************************************************************************/ +void x86emuOp_stos_word(u8 X86EMU_UNUSED(op1)) +{ + int inc; + u32 count; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("STOS\tDWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -4; + else + inc = 4; + } else { + DECODE_PRINTF("STOS\tWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -2; + else + inc = 2; + } + TRACE_AND_STEP(); + count = 1; + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + count = M.x86.R_CX; + M.x86.R_CX = 0; + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } + while (count--) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + store_data_long_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_EAX); + } else { + store_data_word_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AX); + } + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xac +****************************************************************************/ +void x86emuOp_lods_byte(u8 X86EMU_UNUSED(op1)) +{ + int inc; + + START_OF_INSTR(); + DECODE_PRINTF("LODS\tBYTE\n"); + TRACE_AND_STEP(); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -1; + else + inc = 1; + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + M.x86.R_AL = fetch_data_byte(M.x86.R_SI); + M.x86.R_CX -= 1; + M.x86.R_SI += inc; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + M.x86.R_AL = fetch_data_byte(M.x86.R_SI); + M.x86.R_SI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xad +****************************************************************************/ +void x86emuOp_lods_word(u8 X86EMU_UNUSED(op1)) +{ + int inc; + u32 count; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("LODS\tDWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -4; + else + inc = 4; + } else { + DECODE_PRINTF("LODS\tWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -2; + else + inc = 2; + } + TRACE_AND_STEP(); + count = 1; + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* move them until CX is ZERO. */ + count = M.x86.R_CX; + M.x86.R_CX = 0; + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } + while (count--) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EAX = fetch_data_long(M.x86.R_SI); + } else { + M.x86.R_AX = fetch_data_word(M.x86.R_SI); + } + M.x86.R_SI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xae +****************************************************************************/ +void x86emuOp_scas_byte(u8 X86EMU_UNUSED(op1)) +{ + s8 val2; + int inc; + + START_OF_INSTR(); + DECODE_PRINTF("SCAS\tBYTE\n"); + TRACE_AND_STEP(); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -1; + else + inc = 1; + if (M.x86.mode & SYSMODE_PREFIX_REPE) { + /* REPE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI); + cmp_byte(M.x86.R_AL, val2); + M.x86.R_CX -= 1; + M.x86.R_DI += inc; + if (ACCESS_FLAG(F_ZF) == 0) + break; + } + M.x86.mode &= ~SYSMODE_PREFIX_REPE; + } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) { + /* REPNE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI); + cmp_byte(M.x86.R_AL, val2); + M.x86.R_CX -= 1; + M.x86.R_DI += inc; + if (ACCESS_FLAG(F_ZF)) + break; /* zero flag set means equal */ + } + M.x86.mode &= ~SYSMODE_PREFIX_REPNE; + } else { + val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI); + cmp_byte(M.x86.R_AL, val2); + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xaf +****************************************************************************/ +void x86emuOp_scas_word(u8 X86EMU_UNUSED(op1)) +{ + int inc; + u32 val; + + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("SCAS\tDWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -4; + else + inc = 4; + } else { + DECODE_PRINTF("SCAS\tWORD\n"); + if (ACCESS_FLAG(F_DF)) /* down */ + inc = -2; + else + inc = 2; + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_REPE) { + /* REPE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI); + cmp_long(M.x86.R_EAX, val); + } else { + val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI); + cmp_word(M.x86.R_AX, (u16)val); + } + M.x86.R_CX -= 1; + M.x86.R_DI += inc; + if (ACCESS_FLAG(F_ZF) == 0) + break; + } + M.x86.mode &= ~SYSMODE_PREFIX_REPE; + } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) { + /* REPNE */ + /* move them until CX is ZERO. */ + while (M.x86.R_CX != 0) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI); + cmp_long(M.x86.R_EAX, val); + } else { + val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI); + cmp_word(M.x86.R_AX, (u16)val); + } + M.x86.R_CX -= 1; + M.x86.R_DI += inc; + if (ACCESS_FLAG(F_ZF)) + break; /* zero flag set means equal */ + } + M.x86.mode &= ~SYSMODE_PREFIX_REPNE; + } else { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI); + cmp_long(M.x86.R_EAX, val); + } else { + val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI); + cmp_word(M.x86.R_AX, (u16)val); + } + M.x86.R_DI += inc; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xb0 - 0xb7 +****************************************************************************/ +void x86emuOp_mov_byte_register_IMM(u8 op1) +{ + u8 imm, *ptr; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + ptr = DECODE_RM_BYTE_REGISTER(op1 & 0x7); + DECODE_PRINTF(","); + imm = fetch_byte_imm(); + DECODE_PRINTF2("%x\n", imm); + TRACE_AND_STEP(); + *ptr = imm; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xb8 - 0xbf +****************************************************************************/ +void x86emuOp_mov_word_register_IMM(u8 X86EMU_UNUSED(op1)) +{ + u32 srcval; + + op1 &= 0x7; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *reg32; + reg32 = DECODE_RM_LONG_REGISTER(op1); + srcval = fetch_long_imm(); + DECODE_PRINTF2(",%x\n", srcval); + TRACE_AND_STEP(); + *reg32 = srcval; + } else { + u16 *reg16; + reg16 = DECODE_RM_WORD_REGISTER(op1); + srcval = fetch_word_imm(); + DECODE_PRINTF2(",%x\n", srcval); + TRACE_AND_STEP(); + *reg16 = (u16)srcval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc0 +****************************************************************************/ +void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 destval; + u8 amt; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + destval = fetch_data_byte(destoffset); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (destval, amt); + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (*destreg, amt); + *destreg = destval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc1 +****************************************************************************/ +void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + u8 amt; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_long_operation[rh]) (destval, amt); + store_data_long(destoffset, destval); + } else { + u16 destval; + + DECODE_PRINTF("WORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_word_operation[rh]) (destval, amt); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + TRACE_AND_STEP(); + *destreg = (*opcD1_long_operation[rh]) (*destreg, amt); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + amt = fetch_byte_imm(); + DECODE_PRINTF2(",%x\n", amt); + TRACE_AND_STEP(); + *destreg = (*opcD1_word_operation[rh]) (*destreg, amt); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc2 +****************************************************************************/ +void x86emuOp_ret_near_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 imm; + + START_OF_INSTR(); + DECODE_PRINTF("RET\t"); + imm = fetch_word_imm(); + DECODE_PRINTF2("%x\n", imm); + RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip); + TRACE_AND_STEP(); + M.x86.R_IP = pop_word(); + M.x86.R_SP += imm; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc3 +****************************************************************************/ +void x86emuOp_ret_near(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("RET\n"); + RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip); + TRACE_AND_STEP(); + M.x86.R_IP = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc4 +****************************************************************************/ +void x86emuOp_les_R_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rh, rl; + u16 *dstreg; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("LES\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + dstreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *dstreg = fetch_data_word(srcoffset); + M.x86.R_ES = fetch_data_word(srcoffset + 2); + } + /* else UNDEFINED! register to register */ + + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc5 +****************************************************************************/ +void x86emuOp_lds_R_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rh, rl; + u16 *dstreg; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("LDS\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + dstreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *dstreg = fetch_data_word(srcoffset); + M.x86.R_DS = fetch_data_word(srcoffset + 2); + } + /* else UNDEFINED! */ + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc6 +****************************************************************************/ +void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 imm; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (rh != 0) { + DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n"); + HALT_SYS(); + } + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%2x\n", imm); + TRACE_AND_STEP(); + store_data_byte(destoffset, imm); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + imm = fetch_byte_imm(); + DECODE_PRINTF2(",%2x\n", imm); + TRACE_AND_STEP(); + *destreg = imm; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc7 +****************************************************************************/ +void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOV\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (rh != 0) { + DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + HALT_SYS(); + } + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 imm; + + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + imm = fetch_long_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + store_data_long(destoffset, imm); + } else { + u16 imm; + + DECODE_PRINTF("WORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + imm = fetch_word_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + store_data_word(destoffset, imm); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 imm; + + destreg = DECODE_RM_LONG_REGISTER(rl); + imm = fetch_long_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + *destreg = imm; + } else { + u16 *destreg; + u16 imm; + + destreg = DECODE_RM_WORD_REGISTER(rl); + imm = fetch_word_imm(); + DECODE_PRINTF2(",%x\n", imm); + TRACE_AND_STEP(); + *destreg = imm; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc8 +****************************************************************************/ +void x86emuOp_enter(u8 X86EMU_UNUSED(op1)) +{ + u16 local,frame_pointer; + u8 nesting; + int i; + + START_OF_INSTR(); + local = fetch_word_imm(); + nesting = fetch_byte_imm(); + DECODE_PRINTF2("ENTER %x\n", local); + DECODE_PRINTF2(",%x\n", nesting); + TRACE_AND_STEP(); + push_word(M.x86.R_BP); + frame_pointer = M.x86.R_SP; + if (nesting > 0) { + for (i = 1; i < nesting; i++) { + M.x86.R_BP -= 2; + push_word(fetch_data_word_abs(M.x86.R_SS, M.x86.R_BP)); + } + push_word(frame_pointer); + } + M.x86.R_BP = frame_pointer; + M.x86.R_SP = (u16)(M.x86.R_SP - local); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xc9 +****************************************************************************/ +void x86emuOp_leave(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("LEAVE\n"); + TRACE_AND_STEP(); + M.x86.R_SP = M.x86.R_BP; + M.x86.R_BP = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xca +****************************************************************************/ +void x86emuOp_ret_far_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 imm; + + START_OF_INSTR(); + DECODE_PRINTF("RETF\t"); + imm = fetch_word_imm(); + DECODE_PRINTF2("%x\n", imm); + RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip); + TRACE_AND_STEP(); + M.x86.R_IP = pop_word(); + M.x86.R_CS = pop_word(); + M.x86.R_SP += imm; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xcb +****************************************************************************/ +void x86emuOp_ret_far(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("RETF\n"); + RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip); + TRACE_AND_STEP(); + M.x86.R_IP = pop_word(); + M.x86.R_CS = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xcc +****************************************************************************/ +void x86emuOp_int3(u8 X86EMU_UNUSED(op1)) +{ + u16 tmp; + + START_OF_INSTR(); + DECODE_PRINTF("INT 3\n"); + tmp = (u16) mem_access_word(3 * 4 + 2); + /* access the segment register */ + TRACE_AND_STEP(); + if (_X86EMU_intrTab[3]) { + (*_X86EMU_intrTab[3])(3); + } else { + push_word((u16)M.x86.R_FLG); + CLEAR_FLAG(F_IF); + CLEAR_FLAG(F_TF); + push_word(M.x86.R_CS); + M.x86.R_CS = mem_access_word(3 * 4 + 2); + push_word(M.x86.R_IP); + M.x86.R_IP = mem_access_word(3 * 4); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xcd +****************************************************************************/ +void x86emuOp_int_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 tmp; + u8 intnum; + + START_OF_INSTR(); + DECODE_PRINTF("INT\t"); + intnum = fetch_byte_imm(); + DECODE_PRINTF2("%x\n", intnum); + tmp = mem_access_word(intnum * 4 + 2); + TRACE_AND_STEP(); + if (_X86EMU_intrTab[intnum]) { + (*_X86EMU_intrTab[intnum])(intnum); + } else { + push_word((u16)M.x86.R_FLG); + CLEAR_FLAG(F_IF); + CLEAR_FLAG(F_TF); + push_word(M.x86.R_CS); + M.x86.R_CS = mem_access_word(intnum * 4 + 2); + push_word(M.x86.R_IP); + M.x86.R_IP = mem_access_word(intnum * 4); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xce +****************************************************************************/ +void x86emuOp_into(u8 X86EMU_UNUSED(op1)) +{ + u16 tmp; + + START_OF_INSTR(); + DECODE_PRINTF("INTO\n"); + TRACE_AND_STEP(); + if (ACCESS_FLAG(F_OF)) { + tmp = mem_access_word(4 * 4 + 2); + if (_X86EMU_intrTab[4]) { + (*_X86EMU_intrTab[4])(4); + } else { + push_word((u16)M.x86.R_FLG); + CLEAR_FLAG(F_IF); + CLEAR_FLAG(F_TF); + push_word(M.x86.R_CS); + M.x86.R_CS = mem_access_word(4 * 4 + 2); + push_word(M.x86.R_IP); + M.x86.R_IP = mem_access_word(4 * 4); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xcf +****************************************************************************/ +void x86emuOp_iret(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("IRET\n"); + + TRACE_AND_STEP(); + + M.x86.R_IP = pop_word(); + M.x86.R_CS = pop_word(); + M.x86.R_FLG = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd0 +****************************************************************************/ +void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 destval; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",1\n"); + destval = fetch_data_byte(destoffset); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (destval, 1); + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(",1\n"); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (*destreg, 1); + *destreg = destval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd1 +****************************************************************************/ +void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",1\n"); + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_long_operation[rh]) (destval, 1); + store_data_long(destoffset, destval); + } else { + u16 destval; + + DECODE_PRINTF("WORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",1\n"); + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_word_operation[rh]) (destval, 1); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(",1\n"); + TRACE_AND_STEP(); + destval = (*opcD1_long_operation[rh]) (*destreg, 1); + *destreg = destval; + } else { + u16 destval; + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(",1\n"); + TRACE_AND_STEP(); + destval = (*opcD1_word_operation[rh]) (*destreg, 1); + *destreg = destval; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd2 +****************************************************************************/ +void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 destval; + u8 amt; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + amt = M.x86.R_CL; + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",CL\n"); + destval = fetch_data_byte(destoffset); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (destval, amt); + store_data_byte(destoffset, destval); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + destval = (*opcD0_byte_operation[rh]) (*destreg, amt); + *destreg = destval; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd3 +****************************************************************************/ +void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + u8 amt; + + /* + * Yet another weirdo special case instruction format. Part of + * the opcode held below in "RH". Doubly nested case would + * result, except that the decoded instruction + */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + switch (rh) { + case 0: + DECODE_PRINTF("ROL\t"); + break; + case 1: + DECODE_PRINTF("ROR\t"); + break; + case 2: + DECODE_PRINTF("RCL\t"); + break; + case 3: + DECODE_PRINTF("RCR\t"); + break; + case 4: + DECODE_PRINTF("SHL\t"); + break; + case 5: + DECODE_PRINTF("SHR\t"); + break; + case 6: + DECODE_PRINTF("SAL\t"); + break; + case 7: + DECODE_PRINTF("SAR\t"); + break; + } + } +#endif + /* know operation, decode the mod byte to find the addressing + mode. */ + amt = M.x86.R_CL; + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",CL\n"); + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_long_operation[rh]) (destval, amt); + store_data_long(destoffset, destval); + } else { + u16 destval; + + DECODE_PRINTF("WORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(",CL\n"); + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + destval = (*opcD1_word_operation[rh]) (destval, amt); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = (*opcD1_long_operation[rh]) (*destreg, amt); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = (*opcD1_word_operation[rh]) (*destreg, amt); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd4 +****************************************************************************/ +void x86emuOp_aam(u8 X86EMU_UNUSED(op1)) +{ + u8 a; + + START_OF_INSTR(); + DECODE_PRINTF("AAM\n"); + a = fetch_byte_imm(); /* this is a stupid encoding. */ + if (a != 10) { + DECODE_PRINTF("ERROR DECODING AAM\n"); + TRACE_REGS(); + HALT_SYS(); + } + TRACE_AND_STEP(); + /* note the type change here --- returning AL and AH in AX. */ + M.x86.R_AX = aam_word(M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xd5 +****************************************************************************/ +void x86emuOp_aad(u8 X86EMU_UNUSED(op1)) +{ + u8 a; + + START_OF_INSTR(); + DECODE_PRINTF("AAD\n"); + a = fetch_byte_imm(); + TRACE_AND_STEP(); + M.x86.R_AX = aad_word(M.x86.R_AX); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/* opcode 0xd6 ILLEGAL OPCODE */ + +/**************************************************************************** +REMARKS: +Handles opcode 0xd7 +****************************************************************************/ +void x86emuOp_xlat(u8 X86EMU_UNUSED(op1)) +{ + u16 addr; + + START_OF_INSTR(); + DECODE_PRINTF("XLAT\n"); + TRACE_AND_STEP(); + addr = (u16)(M.x86.R_BX + (u8)M.x86.R_AL); + M.x86.R_AL = fetch_data_byte(addr); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/* instuctions D8 .. DF are in i87_ops.c */ + +/**************************************************************************** +REMARKS: +Handles opcode 0xe0 +****************************************************************************/ +void x86emuOp_loopne(u8 X86EMU_UNUSED(op1)) +{ + s16 ip; + + START_OF_INSTR(); + DECODE_PRINTF("LOOPNE\t"); + ip = (s8) fetch_byte_imm(); + ip += (s16) M.x86.R_IP; + DECODE_PRINTF2("%04x\n", ip); + TRACE_AND_STEP(); + M.x86.R_CX -= 1; + if (M.x86.R_CX != 0 && !ACCESS_FLAG(F_ZF)) /* CX != 0 and !ZF */ + M.x86.R_IP = ip; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe1 +****************************************************************************/ +void x86emuOp_loope(u8 X86EMU_UNUSED(op1)) +{ + s16 ip; + + START_OF_INSTR(); + DECODE_PRINTF("LOOPE\t"); + ip = (s8) fetch_byte_imm(); + ip += (s16) M.x86.R_IP; + DECODE_PRINTF2("%04x\n", ip); + TRACE_AND_STEP(); + M.x86.R_CX -= 1; + if (M.x86.R_CX != 0 && ACCESS_FLAG(F_ZF)) /* CX != 0 and ZF */ + M.x86.R_IP = ip; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe2 +****************************************************************************/ +void x86emuOp_loop(u8 X86EMU_UNUSED(op1)) +{ + s16 ip; + + START_OF_INSTR(); + DECODE_PRINTF("LOOP\t"); + ip = (s8) fetch_byte_imm(); + ip += (s16) M.x86.R_IP; + DECODE_PRINTF2("%04x\n", ip); + TRACE_AND_STEP(); + M.x86.R_CX -= 1; + if (M.x86.R_CX != 0) + M.x86.R_IP = ip; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe3 +****************************************************************************/ +void x86emuOp_jcxz(u8 X86EMU_UNUSED(op1)) +{ + u16 target; + s8 offset; + + /* jump to byte offset if overflow flag is set */ + START_OF_INSTR(); + DECODE_PRINTF("JCXZ\t"); + offset = (s8)fetch_byte_imm(); + target = (u16)(M.x86.R_IP + offset); + DECODE_PRINTF2("%x\n", target); + TRACE_AND_STEP(); + if (M.x86.R_CX == 0) + M.x86.R_IP = target; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe4 +****************************************************************************/ +void x86emuOp_in_byte_AL_IMM(u8 X86EMU_UNUSED(op1)) +{ + u8 port; + + START_OF_INSTR(); + DECODE_PRINTF("IN\t"); + port = (u8) fetch_byte_imm(); + DECODE_PRINTF2("%x,AL\n", port); + TRACE_AND_STEP(); + M.x86.R_AL = (*sys_inb)(port); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe5 +****************************************************************************/ +void x86emuOp_in_word_AX_IMM(u8 X86EMU_UNUSED(op1)) +{ + u8 port; + + START_OF_INSTR(); + DECODE_PRINTF("IN\t"); + port = (u8) fetch_byte_imm(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF2("EAX,%x\n", port); + } else { + DECODE_PRINTF2("AX,%x\n", port); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EAX = (*sys_inl)(port); + } else { + M.x86.R_AX = (*sys_inw)(port); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe6 +****************************************************************************/ +void x86emuOp_out_byte_IMM_AL(u8 X86EMU_UNUSED(op1)) +{ + u8 port; + + START_OF_INSTR(); + DECODE_PRINTF("OUT\t"); + port = (u8) fetch_byte_imm(); + DECODE_PRINTF2("%x,AL\n", port); + TRACE_AND_STEP(); + (*sys_outb)(port, M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe7 +****************************************************************************/ +void x86emuOp_out_word_IMM_AX(u8 X86EMU_UNUSED(op1)) +{ + u8 port; + + START_OF_INSTR(); + DECODE_PRINTF("OUT\t"); + port = (u8) fetch_byte_imm(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF2("%x,EAX\n", port); + } else { + DECODE_PRINTF2("%x,AX\n", port); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + (*sys_outl)(port, M.x86.R_EAX); + } else { + (*sys_outw)(port, M.x86.R_AX); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe8 +****************************************************************************/ +void x86emuOp_call_near_IMM(u8 X86EMU_UNUSED(op1)) +{ + s16 ip; + + START_OF_INSTR(); + DECODE_PRINTF("CALL\t"); + ip = (s16) fetch_word_imm(); + ip += (s16) M.x86.R_IP; /* CHECK SIGN */ + DECODE_PRINTF2("%04x\n", ip); + CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, M.x86.R_CS, ip, ""); + TRACE_AND_STEP(); + push_word(M.x86.R_IP); + M.x86.R_IP = ip; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xe9 +****************************************************************************/ +void x86emuOp_jump_near_IMM(u8 X86EMU_UNUSED(op1)) +{ + int ip; + + START_OF_INSTR(); + DECODE_PRINTF("JMP\t"); + ip = (s16)fetch_word_imm(); + ip += (s16)M.x86.R_IP; + DECODE_PRINTF2("%04x\n", ip); + TRACE_AND_STEP(); + M.x86.R_IP = (u16)ip; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xea +****************************************************************************/ +void x86emuOp_jump_far_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 cs, ip; + + START_OF_INSTR(); + DECODE_PRINTF("JMP\tFAR "); + ip = fetch_word_imm(); + cs = fetch_word_imm(); + DECODE_PRINTF2("%04x:", cs); + DECODE_PRINTF2("%04x\n", ip); + TRACE_AND_STEP(); + M.x86.R_IP = ip; + M.x86.R_CS = cs; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xeb +****************************************************************************/ +void x86emuOp_jump_byte_IMM(u8 X86EMU_UNUSED(op1)) +{ + u16 target; + s8 offset; + + START_OF_INSTR(); + DECODE_PRINTF("JMP\t"); + offset = (s8)fetch_byte_imm(); + target = (u16)(M.x86.R_IP + offset); + DECODE_PRINTF2("%x\n", target); + TRACE_AND_STEP(); + M.x86.R_IP = target; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xec +****************************************************************************/ +void x86emuOp_in_byte_AL_DX(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("IN\tAL,DX\n"); + TRACE_AND_STEP(); + M.x86.R_AL = (*sys_inb)(M.x86.R_DX); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xed +****************************************************************************/ +void x86emuOp_in_word_AX_DX(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("IN\tEAX,DX\n"); + } else { + DECODE_PRINTF("IN\tAX,DX\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_EAX = (*sys_inl)(M.x86.R_DX); + } else { + M.x86.R_AX = (*sys_inw)(M.x86.R_DX); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xee +****************************************************************************/ +void x86emuOp_out_byte_DX_AL(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("OUT\tDX,AL\n"); + TRACE_AND_STEP(); + (*sys_outb)(M.x86.R_DX, M.x86.R_AL); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xef +****************************************************************************/ +void x86emuOp_out_word_DX_AX(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("OUT\tDX,EAX\n"); + } else { + DECODE_PRINTF("OUT\tDX,AX\n"); + } + TRACE_AND_STEP(); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + (*sys_outl)(M.x86.R_DX, M.x86.R_EAX); + } else { + (*sys_outw)(M.x86.R_DX, M.x86.R_AX); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf0 +****************************************************************************/ +void x86emuOp_lock(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("LOCK:\n"); + TRACE_AND_STEP(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/*opcode 0xf1 ILLEGAL OPERATION */ + +/**************************************************************************** +REMARKS: +Handles opcode 0xf2 +****************************************************************************/ +void x86emuOp_repne(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("REPNE\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_PREFIX_REPNE; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf3 +****************************************************************************/ +void x86emuOp_repe(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("REPE\n"); + TRACE_AND_STEP(); + M.x86.mode |= SYSMODE_PREFIX_REPE; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf4 +****************************************************************************/ +void x86emuOp_halt(u8 X86EMU_UNUSED(op1)) +{ + START_OF_INSTR(); + DECODE_PRINTF("HALT\n"); + TRACE_AND_STEP(); + HALT_SYS(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf5 +****************************************************************************/ +void x86emuOp_cmc(u8 X86EMU_UNUSED(op1)) +{ + /* complement the carry flag. */ + START_OF_INSTR(); + DECODE_PRINTF("CMC\n"); + TRACE_AND_STEP(); + TOGGLE_FLAG(F_CF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf6 +****************************************************************************/ +void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + u8 *destreg; + uint destoffset; + u8 destval, srcval; + + /* long, drawn out code follows. Double switch for a total + of 32 cases. */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); + DECODE_PRINTF(opF6_names[rh]); + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + destval = fetch_data_byte(destoffset); + + switch (rh) { + case 0: /* test byte imm */ + DECODE_PRINTF(","); + srcval = fetch_byte_imm(); + DECODE_PRINTF2("%02x\n", srcval); + TRACE_AND_STEP(); + test_byte(destval, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = not_byte(destval); + store_data_byte(destoffset, destval); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = neg_byte(destval); + store_data_byte(destoffset, destval); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_byte(destval); + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_byte(destval); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_byte(destval); + break; + default: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_byte(destval); + break; + } + } else { /* mod=11 */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + switch (rh) { + case 0: /* test byte imm */ + DECODE_PRINTF(","); + srcval = fetch_byte_imm(); + DECODE_PRINTF2("%02x\n", srcval); + TRACE_AND_STEP(); + test_byte(*destreg, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = not_byte(*destreg); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = neg_byte(*destreg); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_byte(*destreg); /*!!! */ + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_byte(*destreg); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_byte(*destreg); + break; + default: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_byte(*destreg); + break; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf7 +****************************************************************************/ +void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); + DECODE_PRINTF(opF6_names[rh]); + if (mod < 3) { + + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval, srcval; + + DECODE_PRINTF("DWORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + destval = fetch_data_long(destoffset); + + switch (rh) { + case 0: + DECODE_PRINTF(","); + srcval = fetch_long_imm(); + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + test_long(destval, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = not_long(destval); + store_data_long(destoffset, destval); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = neg_long(destval); + store_data_long(destoffset, destval); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_long(destval); + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_long(destval); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_long(destval); + break; + case 7: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_long(destval); + break; + } + } else { + u16 destval, srcval; + + DECODE_PRINTF("WORD PTR "); + destoffset = decode_rmXX_address(mod, rl); + destval = fetch_data_word(destoffset); + + switch (rh) { + case 0: /* test word imm */ + DECODE_PRINTF(","); + srcval = fetch_word_imm(); + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + test_word(destval, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = not_word(destval); + store_data_word(destoffset, destval); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + destval = neg_word(destval); + store_data_word(destoffset, destval); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_word(destval); + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_word(destval); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_word(destval); + break; + case 7: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_word(destval); + break; + } + } + + } else { /* mod=11 */ + + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + + destreg = DECODE_RM_LONG_REGISTER(rl); + + switch (rh) { + case 0: /* test word imm */ + DECODE_PRINTF(","); + srcval = fetch_long_imm(); + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + test_long(*destreg, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = not_long(*destreg); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = neg_long(*destreg); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_long(*destreg); /*!!! */ + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_long(*destreg); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_long(*destreg); + break; + case 7: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_long(*destreg); + break; + } + } else { + u16 *destreg; + u16 srcval; + + destreg = DECODE_RM_WORD_REGISTER(rl); + + switch (rh) { + case 0: /* test word imm */ + DECODE_PRINTF(","); + srcval = fetch_word_imm(); + DECODE_PRINTF2("%x\n", srcval); + TRACE_AND_STEP(); + test_word(*destreg, srcval); + break; + case 1: + DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + HALT_SYS(); + break; + case 2: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = not_word(*destreg); + break; + case 3: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = neg_word(*destreg); + break; + case 4: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + mul_word(*destreg); /*!!! */ + break; + case 5: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + imul_word(*destreg); + break; + case 6: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + div_word(*destreg); + break; + case 7: + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + idiv_word(*destreg); + break; + } + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf8 +****************************************************************************/ +void x86emuOp_clc(u8 X86EMU_UNUSED(op1)) +{ + /* clear the carry flag. */ + START_OF_INSTR(); + DECODE_PRINTF("CLC\n"); + TRACE_AND_STEP(); + CLEAR_FLAG(F_CF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xf9 +****************************************************************************/ +void x86emuOp_stc(u8 X86EMU_UNUSED(op1)) +{ + /* set the carry flag. */ + START_OF_INSTR(); + DECODE_PRINTF("STC\n"); + TRACE_AND_STEP(); + SET_FLAG(F_CF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xfa +****************************************************************************/ +void x86emuOp_cli(u8 X86EMU_UNUSED(op1)) +{ + /* clear interrupts. */ + START_OF_INSTR(); + DECODE_PRINTF("CLI\n"); + TRACE_AND_STEP(); + CLEAR_FLAG(F_IF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xfb +****************************************************************************/ +void x86emuOp_sti(u8 X86EMU_UNUSED(op1)) +{ + /* enable interrupts. */ + START_OF_INSTR(); + DECODE_PRINTF("STI\n"); + TRACE_AND_STEP(); + SET_FLAG(F_IF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xfc +****************************************************************************/ +void x86emuOp_cld(u8 X86EMU_UNUSED(op1)) +{ + /* clear interrupts. */ + START_OF_INSTR(); + DECODE_PRINTF("CLD\n"); + TRACE_AND_STEP(); + CLEAR_FLAG(F_DF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xfd +****************************************************************************/ +void x86emuOp_std(u8 X86EMU_UNUSED(op1)) +{ + /* clear interrupts. */ + START_OF_INSTR(); + DECODE_PRINTF("STD\n"); + TRACE_AND_STEP(); + SET_FLAG(F_DF); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xfe +****************************************************************************/ +void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rh, rl; + u8 destval; + uint destoffset; + u8 *destreg; + + /* Yet another special case instruction. */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + DECODE_PRINTF("INC\t"); + break; + case 1: + DECODE_PRINTF("DEC\t"); + break; + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod); + HALT_SYS(); + break; + } + } +#endif + if (mod < 3) { + DECODE_PRINTF("BYTE PTR "); + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + destval = fetch_data_byte(destoffset); + TRACE_AND_STEP(); + if (rh == 0) + destval = inc_byte(destval); + else + destval = dec_byte(destval); + store_data_byte(destoffset, destval); + } else { + destreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + if (rh == 0) + *destreg = inc_byte(*destreg); + else + *destreg = dec_byte(*destreg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0xff +****************************************************************************/ +void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) +{ + int mod, rh, rl; + uint destoffset = 0; + u16 *destreg; + u16 destval,destval2; + + /* Yet another special case instruction. */ + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); +#ifdef DEBUG + if (DEBUG_DECODE()) { + /* XXX DECODE_PRINTF may be changed to something more + general, so that it is important to leave the strings + in the same format, even though the result is that the + above test is done twice. */ + + switch (rh) { + case 0: + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("INC\tDWORD PTR "); + } else { + DECODE_PRINTF("INC\tWORD PTR "); + } + break; + case 1: + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + DECODE_PRINTF("DEC\tDWORD PTR "); + } else { + DECODE_PRINTF("DEC\tWORD PTR "); + } + break; + case 2: + DECODE_PRINTF("CALL\t "); + break; + case 3: + DECODE_PRINTF("CALL\tFAR "); + break; + case 4: + DECODE_PRINTF("JMP\t"); + break; + case 5: + DECODE_PRINTF("JMP\tFAR "); + break; + case 6: + DECODE_PRINTF("PUSH\t"); + break; + case 7: + DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t"); + HALT_SYS(); + break; + } + } +#endif + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + switch (rh) { + case 0: /* inc word ptr ... */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + destval = inc_long(destval); + store_data_long(destoffset, destval); + } else { + u16 destval; + + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + destval = inc_word(destval); + store_data_word(destoffset, destval); + } + break; + case 1: /* dec word ptr ... */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + destval = dec_long(destval); + store_data_long(destoffset, destval); + } else { + u16 destval; + + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + destval = dec_word(destval); + store_data_word(destoffset, destval); + } + break; + case 2: /* call word ptr ... */ + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + push_word(M.x86.R_IP); + M.x86.R_IP = destval; + break; + case 3: /* call far ptr ... */ + destval = fetch_data_word(destoffset); + destval2 = fetch_data_word(destoffset + 2); + TRACE_AND_STEP(); + push_word(M.x86.R_CS); + M.x86.R_CS = destval2; + push_word(M.x86.R_IP); + M.x86.R_IP = destval; + break; + case 4: /* jmp word ptr ... */ + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + M.x86.R_IP = destval; + break; + case 5: /* jmp far ptr ... */ + destval = fetch_data_word(destoffset); + destval2 = fetch_data_word(destoffset + 2); + TRACE_AND_STEP(); + M.x86.R_IP = destval; + M.x86.R_CS = destval2; + break; + case 6: /* push word ptr ... */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + + destval = fetch_data_long(destoffset); + TRACE_AND_STEP(); + push_long(destval); + } else { + u16 destval; + + destval = fetch_data_word(destoffset); + TRACE_AND_STEP(); + push_word(destval); + } + break; + } + } else { + switch (rh) { + case 0: + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = inc_long(*destreg); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = inc_word(*destreg); + } + break; + case 1: + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = dec_long(*destreg); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = dec_word(*destreg); + } + break; + case 2: /* call word ptr ... */ + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_IP); + M.x86.R_IP = *destreg; + break; + case 3: /* jmp far ptr ... */ + DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + TRACE_AND_STEP(); + HALT_SYS(); + break; + + case 4: /* jmp ... */ + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + M.x86.R_IP = (u16) (*destreg); + break; + case 5: /* jmp far ptr ... */ + DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + TRACE_AND_STEP(); + HALT_SYS(); + break; + case 6: + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + push_long(*destreg); + } else { + u16 *destreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + push_word(*destreg); + } + break; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/*************************************************************************** + * Single byte operation code table: + **************************************************************************/ +void (*x86emu_optab[256])(u8) __attribute__ ((section(".got2"))) = +{ +/* 0x00 */ x86emuOp_genop_byte_RM_R, +/* 0x01 */ x86emuOp_genop_word_RM_R, +/* 0x02 */ x86emuOp_genop_byte_R_RM, +/* 0x03 */ x86emuOp_genop_word_R_RM, +/* 0x04 */ x86emuOp_genop_byte_AL_IMM, +/* 0x05 */ x86emuOp_genop_word_AX_IMM, +/* 0x06 */ x86emuOp_push_ES, +/* 0x07 */ x86emuOp_pop_ES, + +/* 0x08 */ x86emuOp_genop_byte_RM_R, +/* 0x09 */ x86emuOp_genop_word_RM_R, +/* 0x0a */ x86emuOp_genop_byte_R_RM, +/* 0x0b */ x86emuOp_genop_word_R_RM, +/* 0x0c */ x86emuOp_genop_byte_AL_IMM, +/* 0x0d */ x86emuOp_genop_word_AX_IMM, +/* 0x0e */ x86emuOp_push_CS, +/* 0x0f */ x86emuOp_two_byte, + +/* 0x10 */ x86emuOp_genop_byte_RM_R, +/* 0x11 */ x86emuOp_genop_word_RM_R, +/* 0x12 */ x86emuOp_genop_byte_R_RM, +/* 0x13 */ x86emuOp_genop_word_R_RM, +/* 0x14 */ x86emuOp_genop_byte_AL_IMM, +/* 0x15 */ x86emuOp_genop_word_AX_IMM, +/* 0x16 */ x86emuOp_push_SS, +/* 0x17 */ x86emuOp_pop_SS, + +/* 0x18 */ x86emuOp_genop_byte_RM_R, +/* 0x19 */ x86emuOp_genop_word_RM_R, +/* 0x1a */ x86emuOp_genop_byte_R_RM, +/* 0x1b */ x86emuOp_genop_word_R_RM, +/* 0x1c */ x86emuOp_genop_byte_AL_IMM, +/* 0x1d */ x86emuOp_genop_word_AX_IMM, +/* 0x1e */ x86emuOp_push_DS, +/* 0x1f */ x86emuOp_pop_DS, + +/* 0x20 */ x86emuOp_genop_byte_RM_R, +/* 0x21 */ x86emuOp_genop_word_RM_R, +/* 0x22 */ x86emuOp_genop_byte_R_RM, +/* 0x23 */ x86emuOp_genop_word_R_RM, +/* 0x24 */ x86emuOp_genop_byte_AL_IMM, +/* 0x25 */ x86emuOp_genop_word_AX_IMM, +/* 0x26 */ x86emuOp_segovr_ES, +/* 0x27 */ x86emuOp_daa, + +/* 0x28 */ x86emuOp_genop_byte_RM_R, +/* 0x29 */ x86emuOp_genop_word_RM_R, +/* 0x2a */ x86emuOp_genop_byte_R_RM, +/* 0x2b */ x86emuOp_genop_word_R_RM, +/* 0x2c */ x86emuOp_genop_byte_AL_IMM, +/* 0x2d */ x86emuOp_genop_word_AX_IMM, +/* 0x2e */ x86emuOp_segovr_CS, +/* 0x2f */ x86emuOp_das, + +/* 0x30 */ x86emuOp_genop_byte_RM_R, +/* 0x31 */ x86emuOp_genop_word_RM_R, +/* 0x32 */ x86emuOp_genop_byte_R_RM, +/* 0x33 */ x86emuOp_genop_word_R_RM, +/* 0x34 */ x86emuOp_genop_byte_AL_IMM, +/* 0x35 */ x86emuOp_genop_word_AX_IMM, +/* 0x36 */ x86emuOp_segovr_SS, +/* 0x37 */ x86emuOp_aaa, + +/* 0x38 */ x86emuOp_genop_byte_RM_R, +/* 0x39 */ x86emuOp_genop_word_RM_R, +/* 0x3a */ x86emuOp_genop_byte_R_RM, +/* 0x3b */ x86emuOp_genop_word_R_RM, +/* 0x3c */ x86emuOp_genop_byte_AL_IMM, +/* 0x3d */ x86emuOp_genop_word_AX_IMM, +/* 0x3e */ x86emuOp_segovr_DS, +/* 0x3f */ x86emuOp_aas, + +/* 0x40 */ x86emuOp_inc_register, +/* 0x41 */ x86emuOp_inc_register, +/* 0x42 */ x86emuOp_inc_register, +/* 0x43 */ x86emuOp_inc_register, +/* 0x44 */ x86emuOp_inc_register, +/* 0x45 */ x86emuOp_inc_register, +/* 0x46 */ x86emuOp_inc_register, +/* 0x47 */ x86emuOp_inc_register, + +/* 0x48 */ x86emuOp_dec_register, +/* 0x49 */ x86emuOp_dec_register, +/* 0x4a */ x86emuOp_dec_register, +/* 0x4b */ x86emuOp_dec_register, +/* 0x4c */ x86emuOp_dec_register, +/* 0x4d */ x86emuOp_dec_register, +/* 0x4e */ x86emuOp_dec_register, +/* 0x4f */ x86emuOp_dec_register, + +/* 0x50 */ x86emuOp_push_register, +/* 0x51 */ x86emuOp_push_register, +/* 0x52 */ x86emuOp_push_register, +/* 0x53 */ x86emuOp_push_register, +/* 0x54 */ x86emuOp_push_register, +/* 0x55 */ x86emuOp_push_register, +/* 0x56 */ x86emuOp_push_register, +/* 0x57 */ x86emuOp_push_register, + +/* 0x58 */ x86emuOp_pop_register, +/* 0x59 */ x86emuOp_pop_register, +/* 0x5a */ x86emuOp_pop_register, +/* 0x5b */ x86emuOp_pop_register, +/* 0x5c */ x86emuOp_pop_register, +/* 0x5d */ x86emuOp_pop_register, +/* 0x5e */ x86emuOp_pop_register, +/* 0x5f */ x86emuOp_pop_register, + +/* 0x60 */ x86emuOp_push_all, +/* 0x61 */ x86emuOp_pop_all, +/* 0x62 */ x86emuOp_illegal_op, /* bound */ +/* 0x63 */ x86emuOp_illegal_op, /* arpl */ +/* 0x64 */ x86emuOp_segovr_FS, +/* 0x65 */ x86emuOp_segovr_GS, +/* 0x66 */ x86emuOp_prefix_data, +/* 0x67 */ x86emuOp_prefix_addr, + +/* 0x68 */ x86emuOp_push_word_IMM, +/* 0x69 */ x86emuOp_imul_word_IMM, +/* 0x6a */ x86emuOp_push_byte_IMM, +/* 0x6b */ x86emuOp_imul_byte_IMM, +/* 0x6c */ x86emuOp_ins_byte, +/* 0x6d */ x86emuOp_ins_word, +/* 0x6e */ x86emuOp_outs_byte, +/* 0x6f */ x86emuOp_outs_word, + +/* 0x70 */ x86emuOp_jump_near_cond, +/* 0x71 */ x86emuOp_jump_near_cond, +/* 0x72 */ x86emuOp_jump_near_cond, +/* 0x73 */ x86emuOp_jump_near_cond, +/* 0x74 */ x86emuOp_jump_near_cond, +/* 0x75 */ x86emuOp_jump_near_cond, +/* 0x76 */ x86emuOp_jump_near_cond, +/* 0x77 */ x86emuOp_jump_near_cond, + +/* 0x78 */ x86emuOp_jump_near_cond, +/* 0x79 */ x86emuOp_jump_near_cond, +/* 0x7a */ x86emuOp_jump_near_cond, +/* 0x7b */ x86emuOp_jump_near_cond, +/* 0x7c */ x86emuOp_jump_near_cond, +/* 0x7d */ x86emuOp_jump_near_cond, +/* 0x7e */ x86emuOp_jump_near_cond, +/* 0x7f */ x86emuOp_jump_near_cond, + +/* 0x80 */ x86emuOp_opc80_byte_RM_IMM, +/* 0x81 */ x86emuOp_opc81_word_RM_IMM, +/* 0x82 */ x86emuOp_opc82_byte_RM_IMM, +/* 0x83 */ x86emuOp_opc83_word_RM_IMM, +/* 0x84 */ x86emuOp_test_byte_RM_R, +/* 0x85 */ x86emuOp_test_word_RM_R, +/* 0x86 */ x86emuOp_xchg_byte_RM_R, +/* 0x87 */ x86emuOp_xchg_word_RM_R, + +/* 0x88 */ x86emuOp_mov_byte_RM_R, +/* 0x89 */ x86emuOp_mov_word_RM_R, +/* 0x8a */ x86emuOp_mov_byte_R_RM, +/* 0x8b */ x86emuOp_mov_word_R_RM, +/* 0x8c */ x86emuOp_mov_word_RM_SR, +/* 0x8d */ x86emuOp_lea_word_R_M, +/* 0x8e */ x86emuOp_mov_word_SR_RM, +/* 0x8f */ x86emuOp_pop_RM, + +/* 0x90 */ x86emuOp_nop, +/* 0x91 */ x86emuOp_xchg_word_AX_register, +/* 0x92 */ x86emuOp_xchg_word_AX_register, +/* 0x93 */ x86emuOp_xchg_word_AX_register, +/* 0x94 */ x86emuOp_xchg_word_AX_register, +/* 0x95 */ x86emuOp_xchg_word_AX_register, +/* 0x96 */ x86emuOp_xchg_word_AX_register, +/* 0x97 */ x86emuOp_xchg_word_AX_register, + +/* 0x98 */ x86emuOp_cbw, +/* 0x99 */ x86emuOp_cwd, +/* 0x9a */ x86emuOp_call_far_IMM, +/* 0x9b */ x86emuOp_wait, +/* 0x9c */ x86emuOp_pushf_word, +/* 0x9d */ x86emuOp_popf_word, +/* 0x9e */ x86emuOp_sahf, +/* 0x9f */ x86emuOp_lahf, + +/* 0xa0 */ x86emuOp_mov_AL_M_IMM, +/* 0xa1 */ x86emuOp_mov_AX_M_IMM, +/* 0xa2 */ x86emuOp_mov_M_AL_IMM, +/* 0xa3 */ x86emuOp_mov_M_AX_IMM, +/* 0xa4 */ x86emuOp_movs_byte, +/* 0xa5 */ x86emuOp_movs_word, +/* 0xa6 */ x86emuOp_cmps_byte, +/* 0xa7 */ x86emuOp_cmps_word, +/* 0xa8 */ x86emuOp_test_AL_IMM, +/* 0xa9 */ x86emuOp_test_AX_IMM, +/* 0xaa */ x86emuOp_stos_byte, +/* 0xab */ x86emuOp_stos_word, +/* 0xac */ x86emuOp_lods_byte, +/* 0xad */ x86emuOp_lods_word, +/* 0xac */ x86emuOp_scas_byte, +/* 0xad */ x86emuOp_scas_word, + +/* 0xb0 */ x86emuOp_mov_byte_register_IMM, +/* 0xb1 */ x86emuOp_mov_byte_register_IMM, +/* 0xb2 */ x86emuOp_mov_byte_register_IMM, +/* 0xb3 */ x86emuOp_mov_byte_register_IMM, +/* 0xb4 */ x86emuOp_mov_byte_register_IMM, +/* 0xb5 */ x86emuOp_mov_byte_register_IMM, +/* 0xb6 */ x86emuOp_mov_byte_register_IMM, +/* 0xb7 */ x86emuOp_mov_byte_register_IMM, + +/* 0xb8 */ x86emuOp_mov_word_register_IMM, +/* 0xb9 */ x86emuOp_mov_word_register_IMM, +/* 0xba */ x86emuOp_mov_word_register_IMM, +/* 0xbb */ x86emuOp_mov_word_register_IMM, +/* 0xbc */ x86emuOp_mov_word_register_IMM, +/* 0xbd */ x86emuOp_mov_word_register_IMM, +/* 0xbe */ x86emuOp_mov_word_register_IMM, +/* 0xbf */ x86emuOp_mov_word_register_IMM, + +/* 0xc0 */ x86emuOp_opcC0_byte_RM_MEM, +/* 0xc1 */ x86emuOp_opcC1_word_RM_MEM, +/* 0xc2 */ x86emuOp_ret_near_IMM, +/* 0xc3 */ x86emuOp_ret_near, +/* 0xc4 */ x86emuOp_les_R_IMM, +/* 0xc5 */ x86emuOp_lds_R_IMM, +/* 0xc6 */ x86emuOp_mov_byte_RM_IMM, +/* 0xc7 */ x86emuOp_mov_word_RM_IMM, +/* 0xc8 */ x86emuOp_enter, +/* 0xc9 */ x86emuOp_leave, +/* 0xca */ x86emuOp_ret_far_IMM, +/* 0xcb */ x86emuOp_ret_far, +/* 0xcc */ x86emuOp_int3, +/* 0xcd */ x86emuOp_int_IMM, +/* 0xce */ x86emuOp_into, +/* 0xcf */ x86emuOp_iret, + +/* 0xd0 */ x86emuOp_opcD0_byte_RM_1, +/* 0xd1 */ x86emuOp_opcD1_word_RM_1, +/* 0xd2 */ x86emuOp_opcD2_byte_RM_CL, +/* 0xd3 */ x86emuOp_opcD3_word_RM_CL, +/* 0xd4 */ x86emuOp_aam, +/* 0xd5 */ x86emuOp_aad, +/* 0xd6 */ x86emuOp_illegal_op, /* Undocumented SETALC instruction */ +/* 0xd7 */ x86emuOp_xlat, +/* 0xd8 */ NULL, /*x86emuOp_esc_coprocess_d8,*/ +/* 0xd9 */ NULL, /*x86emuOp_esc_coprocess_d9,*/ +/* 0xda */ NULL, /*x86emuOp_esc_coprocess_da,*/ +/* 0xdb */ NULL, /*x86emuOp_esc_coprocess_db,*/ +/* 0xdc */ NULL, /*x86emuOp_esc_coprocess_dc,*/ +/* 0xdd */ NULL, /*x86emuOp_esc_coprocess_dd,*/ +/* 0xde */ NULL, /*x86emuOp_esc_coprocess_de,*/ +/* 0xdf */ NULL, /*x86emuOp_esc_coprocess_df,*/ + +/* 0xe0 */ x86emuOp_loopne, +/* 0xe1 */ x86emuOp_loope, +/* 0xe2 */ x86emuOp_loop, +/* 0xe3 */ x86emuOp_jcxz, +/* 0xe4 */ x86emuOp_in_byte_AL_IMM, +/* 0xe5 */ x86emuOp_in_word_AX_IMM, +/* 0xe6 */ x86emuOp_out_byte_IMM_AL, +/* 0xe7 */ x86emuOp_out_word_IMM_AX, + +/* 0xe8 */ x86emuOp_call_near_IMM, +/* 0xe9 */ x86emuOp_jump_near_IMM, +/* 0xea */ x86emuOp_jump_far_IMM, +/* 0xeb */ x86emuOp_jump_byte_IMM, +/* 0xec */ x86emuOp_in_byte_AL_DX, +/* 0xed */ x86emuOp_in_word_AX_DX, +/* 0xee */ x86emuOp_out_byte_DX_AL, +/* 0xef */ x86emuOp_out_word_DX_AX, + +/* 0xf0 */ x86emuOp_lock, +/* 0xf1 */ x86emuOp_illegal_op, +/* 0xf2 */ x86emuOp_repne, +/* 0xf3 */ x86emuOp_repe, +/* 0xf4 */ x86emuOp_halt, +/* 0xf5 */ x86emuOp_cmc, +/* 0xf6 */ x86emuOp_opcF6_byte_RM, +/* 0xf7 */ x86emuOp_opcF7_word_RM, + +/* 0xf8 */ x86emuOp_clc, +/* 0xf9 */ x86emuOp_stc, +/* 0xfa */ x86emuOp_cli, +/* 0xfb */ x86emuOp_sti, +/* 0xfc */ x86emuOp_cld, +/* 0xfd */ x86emuOp_std, +/* 0xfe */ x86emuOp_opcFE_byte_RM, +/* 0xff */ x86emuOp_opcFF_word_RM, +}; diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c new file mode 100644 index 0000000..2412b24 --- /dev/null +++ b/drivers/bios_emulator/x86emu/ops2.c @@ -0,0 +1,1770 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. +* Jason Jin <Jason.jin@freescale.com> +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file includes subroutines to implement the decoding +* and emulation of all the x86 extended two-byte processor +* instructions. +* +* Jason port this file to u-boot. Put the function pointer into +* got2 sector. +* +****************************************************************************/ + +#include "x86emu/x86emui.h" + +/*----------------------------- Implementation ----------------------------*/ + +/**************************************************************************** +PARAMETERS: +op1 - Instruction op code + +REMARKS: +Handles illegal opcodes. +****************************************************************************/ +void x86emuOp2_illegal_op( + u8 op2) +{ + START_OF_INSTR(); + DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + TRACE_REGS(); + printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n", + M.x86.R_CS, M.x86.R_IP-2,op2); + HALT_SYS(); + END_OF_INSTR(); +} + +#define xorl(a,b) ((a) && !(b)) || (!(a) && (b)) + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0x80-0x8F +****************************************************************************/ +int x86emu_check_jump_condition(u8 op) +{ + switch (op) { + case 0x0: + DECODE_PRINTF("JO\t"); + return ACCESS_FLAG(F_OF); + case 0x1: + DECODE_PRINTF("JNO\t"); + return !ACCESS_FLAG(F_OF); + break; + case 0x2: + DECODE_PRINTF("JB\t"); + return ACCESS_FLAG(F_CF); + break; + case 0x3: + DECODE_PRINTF("JNB\t"); + return !ACCESS_FLAG(F_CF); + break; + case 0x4: + DECODE_PRINTF("JZ\t"); + return ACCESS_FLAG(F_ZF); + break; + case 0x5: + DECODE_PRINTF("JNZ\t"); + return !ACCESS_FLAG(F_ZF); + break; + case 0x6: + DECODE_PRINTF("JBE\t"); + return ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF); + break; + case 0x7: + DECODE_PRINTF("JNBE\t"); + return !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF)); + break; + case 0x8: + DECODE_PRINTF("JS\t"); + return ACCESS_FLAG(F_SF); + break; + case 0x9: + DECODE_PRINTF("JNS\t"); + return !ACCESS_FLAG(F_SF); + break; + case 0xa: + DECODE_PRINTF("JP\t"); + return ACCESS_FLAG(F_PF); + break; + case 0xb: + DECODE_PRINTF("JNP\t"); + return !ACCESS_FLAG(F_PF); + break; + case 0xc: + DECODE_PRINTF("JL\t"); + return xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)); + break; + case 0xd: + DECODE_PRINTF("JNL\t"); + return !xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)); + break; + case 0xe: + DECODE_PRINTF("JLE\t"); + return (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) || + ACCESS_FLAG(F_ZF)); + break; + default: + DECODE_PRINTF("JNLE\t"); + return !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) || + ACCESS_FLAG(F_ZF)); + } +} + +void x86emuOp2_long_jump(u8 op2) +{ + s32 target; + int cond; + + /* conditional jump to word offset. */ + START_OF_INSTR(); + cond = x86emu_check_jump_condition(op2 & 0xF); + target = (s16) fetch_word_imm(); + target += (s16) M.x86.R_IP; + DECODE_PRINTF2("%04x\n", target); + TRACE_AND_STEP(); + if (cond) + M.x86.R_IP = (u16)target; + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0x90-0x9F +****************************************************************************/ +void x86emuOp2_set_byte(u8 op2) +{ + int mod, rl, rh; + uint destoffset; + u8 *destreg; + char *name = 0; + int cond = 0; + + START_OF_INSTR(); + switch (op2) { + case 0x90: + name = "SETO\t"; + cond = ACCESS_FLAG(F_OF); + break; + case 0x91: + name = "SETNO\t"; + cond = !ACCESS_FLAG(F_OF); + break; + case 0x92: + name = "SETB\t"; + cond = ACCESS_FLAG(F_CF); + break; + case 0x93: + name = "SETNB\t"; + cond = !ACCESS_FLAG(F_CF); + break; + case 0x94: + name = "SETZ\t"; + cond = ACCESS_FLAG(F_ZF); + break; + case 0x95: + name = "SETNZ\t"; + cond = !ACCESS_FLAG(F_ZF); + break; + case 0x96: + name = "SETBE\t"; + cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF); + break; + case 0x97: + name = "SETNBE\t"; + cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF)); + break; + case 0x98: + name = "SETS\t"; + cond = ACCESS_FLAG(F_SF); + break; + case 0x99: + name = "SETNS\t"; + cond = !ACCESS_FLAG(F_SF); + break; + case 0x9a: + name = "SETP\t"; + cond = ACCESS_FLAG(F_PF); + break; + case 0x9b: + name = "SETNP\t"; + cond = !ACCESS_FLAG(F_PF); + break; + case 0x9c: + name = "SETL\t"; + cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)); + break; + case 0x9d: + name = "SETNL\t"; + cond = !xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)); + break; + case 0x9e: + name = "SETLE\t"; + cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) || + ACCESS_FLAG(F_ZF)); + break; + case 0x9f: + name = "SETNLE\t"; + cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) || + ACCESS_FLAG(F_ZF)); + break; + } + DECODE_PRINTF(name); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + TRACE_AND_STEP(); + store_data_byte(destoffset, cond ? 0x01 : 0x00); + } else { /* register to register */ + destreg = DECODE_RM_BYTE_REGISTER(rl); + TRACE_AND_STEP(); + *destreg = cond ? 0x01 : 0x00; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa0 +****************************************************************************/ +void x86emuOp2_push_FS(u8 X86EMU_UNUSED(op2)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tFS\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_FS); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa1 +****************************************************************************/ +void x86emuOp2_pop_FS(u8 X86EMU_UNUSED(op2)) +{ + START_OF_INSTR(); + DECODE_PRINTF("POP\tFS\n"); + TRACE_AND_STEP(); + M.x86.R_FS = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa3 +****************************************************************************/ +void x86emuOp2_bt_R(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + int bit,disp; + + START_OF_INSTR(); + DECODE_PRINTF("BT\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval; + u32 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + disp = (s16)*shiftreg >> 5; + srcval = fetch_data_long(srcoffset+disp); + CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF); + } else { + u16 srcval; + u16 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + disp = (s16)*shiftreg >> 4; + srcval = fetch_data_word(srcoffset+disp); + CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg,*shiftreg; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF); + } else { + u16 *srcreg,*shiftreg; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa4 +****************************************************************************/ +void x86emuOp2_shld_IMM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint destoffset; + u8 shift; + + START_OF_INSTR(); + DECODE_PRINTF("SHLD\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + destval = fetch_data_long(destoffset); + destval = shld_long(destval,*shiftreg,shift); + store_data_long(destoffset, destval); + } else { + u16 destval; + u16 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + destval = fetch_data_word(destoffset); + destval = shld_word(destval,*shiftreg,shift); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*shiftreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + *destreg = shld_long(*destreg,*shiftreg,shift); + } else { + u16 *destreg,*shiftreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + *destreg = shld_word(*destreg,*shiftreg,shift); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa5 +****************************************************************************/ +void x86emuOp2_shld_CL(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("SHLD\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + destval = fetch_data_long(destoffset); + destval = shld_long(destval,*shiftreg,M.x86.R_CL); + store_data_long(destoffset, destval); + } else { + u16 destval; + u16 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + destval = fetch_data_word(destoffset); + destval = shld_word(destval,*shiftreg,M.x86.R_CL); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*shiftreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = shld_long(*destreg,*shiftreg,M.x86.R_CL); + } else { + u16 *destreg,*shiftreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = shld_word(*destreg,*shiftreg,M.x86.R_CL); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa8 +****************************************************************************/ +void x86emuOp2_push_GS(u8 X86EMU_UNUSED(op2)) +{ + START_OF_INSTR(); + DECODE_PRINTF("PUSH\tGS\n"); + TRACE_AND_STEP(); + push_word(M.x86.R_GS); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xa9 +****************************************************************************/ +void x86emuOp2_pop_GS(u8 X86EMU_UNUSED(op2)) +{ + START_OF_INSTR(); + DECODE_PRINTF("POP\tGS\n"); + TRACE_AND_STEP(); + M.x86.R_GS = pop_word(); + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xaa +****************************************************************************/ +void x86emuOp2_bts_R(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + int bit,disp; + + START_OF_INSTR(); + DECODE_PRINTF("BTS\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval,mask; + u32 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + disp = (s16)*shiftreg >> 5; + srcval = fetch_data_long(srcoffset+disp); + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_long(srcoffset+disp, srcval | mask); + } else { + u16 srcval,mask; + u16 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + disp = (s16)*shiftreg >> 4; + srcval = fetch_data_word(srcoffset+disp); + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_word(srcoffset+disp, srcval | mask); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg,*shiftreg; + u32 mask; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg |= mask; + } else { + u16 *srcreg,*shiftreg; + u16 mask; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg |= mask; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xac +****************************************************************************/ +void x86emuOp2_shrd_IMM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint destoffset; + u8 shift; + + START_OF_INSTR(); + DECODE_PRINTF("SHLD\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + destval = fetch_data_long(destoffset); + destval = shrd_long(destval,*shiftreg,shift); + store_data_long(destoffset, destval); + } else { + u16 destval; + u16 *shiftreg; + + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + destval = fetch_data_word(destoffset); + destval = shrd_word(destval,*shiftreg,shift); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*shiftreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + *destreg = shrd_long(*destreg,*shiftreg,shift); + } else { + u16 *destreg,*shiftreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + shift = fetch_byte_imm(); + DECODE_PRINTF2("%d\n", shift); + TRACE_AND_STEP(); + *destreg = shrd_word(*destreg,*shiftreg,shift); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xad +****************************************************************************/ +void x86emuOp2_shrd_CL(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint destoffset; + + START_OF_INSTR(); + DECODE_PRINTF("SHLD\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 destval; + u32 *shiftreg; + + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + destval = fetch_data_long(destoffset); + destval = shrd_long(destval,*shiftreg,M.x86.R_CL); + store_data_long(destoffset, destval); + } else { + u16 destval; + u16 *shiftreg; + + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + destval = fetch_data_word(destoffset); + destval = shrd_word(destval,*shiftreg,M.x86.R_CL); + store_data_word(destoffset, destval); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*shiftreg; + + destreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = shrd_long(*destreg,*shiftreg,M.x86.R_CL); + } else { + u16 *destreg,*shiftreg; + + destreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(",CL\n"); + TRACE_AND_STEP(); + *destreg = shrd_word(*destreg,*shiftreg,M.x86.R_CL); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xaf +****************************************************************************/ +void x86emuOp2_imul_R_RM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("IMUL\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + u32 res_lo,res_hi; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_long(srcoffset); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval); + if (res_hi != 0) { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg; + u16 srcval; + u32 res; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_word(srcoffset); + TRACE_AND_STEP(); + res = (s16)*destreg * (s16)srcval; + if (res > 0xFFFF) { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } + *destreg = (u16)res; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg,*srcreg; + u32 res_lo,res_hi; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_LONG_REGISTER(rl); + TRACE_AND_STEP(); + imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)*srcreg); + if (res_hi != 0) { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } + *destreg = (u32)res_lo; + } else { + u16 *destreg,*srcreg; + u32 res; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + res = (s16)*destreg * (s16)*srcreg; + if (res > 0xFFFF) { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } + *destreg = (u16)res; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb2 +****************************************************************************/ +void x86emuOp2_lss_R_IMM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rh, rl; + u16 *dstreg; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("LSS\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + dstreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *dstreg = fetch_data_word(srcoffset); + M.x86.R_SS = fetch_data_word(srcoffset + 2); + } else { /* register to register */ + /* UNDEFINED! */ + TRACE_AND_STEP(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb3 +****************************************************************************/ +void x86emuOp2_btr_R(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + int bit,disp; + + START_OF_INSTR(); + DECODE_PRINTF("BTR\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval,mask; + u32 *shiftreg; + + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + disp = (s16)*shiftreg >> 5; + srcval = fetch_data_long(srcoffset+disp); + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_long(srcoffset+disp, srcval & ~mask); + } else { + u16 srcval,mask; + u16 *shiftreg; + + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + disp = (s16)*shiftreg >> 4; + srcval = fetch_data_word(srcoffset+disp); + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_word(srcoffset+disp, (u16)(srcval & ~mask)); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg,*shiftreg; + u32 mask; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg &= ~mask; + } else { + u16 *srcreg,*shiftreg; + u16 mask; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg &= ~mask; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb4 +****************************************************************************/ +void x86emuOp2_lfs_R_IMM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rh, rl; + u16 *dstreg; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("LFS\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + dstreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *dstreg = fetch_data_word(srcoffset); + M.x86.R_FS = fetch_data_word(srcoffset + 2); + } else { /* register to register */ + /* UNDEFINED! */ + TRACE_AND_STEP(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb5 +****************************************************************************/ +void x86emuOp2_lgs_R_IMM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rh, rl; + u16 *dstreg; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("LGS\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + dstreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *dstreg = fetch_data_word(srcoffset); + M.x86.R_GS = fetch_data_word(srcoffset + 2); + } else { /* register to register */ + /* UNDEFINED! */ + TRACE_AND_STEP(); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb6 +****************************************************************************/ +void x86emuOp2_movzx_byte_R_RM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOVZX\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_byte(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { + u16 *destreg; + u16 srcval; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_byte(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u8 *srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } else { + u16 *destreg; + u8 *srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xb7 +****************************************************************************/ +void x86emuOp2_movzx_word_R_RM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + u32 *destreg; + u32 srcval; + u16 *srcreg; + + START_OF_INSTR(); + DECODE_PRINTF("MOVZX\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = fetch_data_word(srcoffset); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { /* register to register */ + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = *srcreg; + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xba +****************************************************************************/ +void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + u8 shift; + int bit; + + START_OF_INSTR(); + FETCH_DECODE_MODRM(mod, rh, rl); + switch (rh) { + case 4: + DECODE_PRINTF("BT\t"); + break; + case 5: + DECODE_PRINTF("BTS\t"); + break; + case 6: + DECODE_PRINTF("BTR\t"); + break; + case 7: + DECODE_PRINTF("BTC\t"); + break; + default: + DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + TRACE_REGS(); + printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n", + M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl); + HALT_SYS(); + } + if (mod < 3) { + + srcoffset = decode_rmXX_address(mod, rl); + shift = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", shift); + TRACE_AND_STEP(); + + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval, mask; + + bit = shift & 0x1F; + srcval = fetch_data_long(srcoffset); + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + switch (rh) { + case 5: + store_data_long(srcoffset, srcval | mask); + break; + case 6: + store_data_long(srcoffset, srcval & ~mask); + break; + case 7: + store_data_long(srcoffset, srcval ^ mask); + break; + default: + break; + } + } else { + u16 srcval, mask; + + bit = shift & 0xF; + srcval = fetch_data_word(srcoffset); + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + switch (rh) { + case 5: + store_data_word(srcoffset, srcval | mask); + break; + case 6: + store_data_word(srcoffset, srcval & ~mask); + break; + case 7: + store_data_word(srcoffset, srcval ^ mask); + break; + default: + break; + } + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg; + u32 mask; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + shift = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", shift); + TRACE_AND_STEP(); + bit = shift & 0x1F; + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + switch (rh) { + case 5: + *srcreg |= mask; + break; + case 6: + *srcreg &= ~mask; + break; + case 7: + *srcreg ^= mask; + break; + default: + break; + } + } else { + u16 *srcreg; + u16 mask; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + shift = fetch_byte_imm(); + DECODE_PRINTF2(",%d\n", shift); + TRACE_AND_STEP(); + bit = shift & 0xF; + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + switch (rh) { + case 5: + *srcreg |= mask; + break; + case 6: + *srcreg &= ~mask; + break; + case 7: + *srcreg ^= mask; + break; + default: + break; + } + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xbb +****************************************************************************/ +void x86emuOp2_btc_R(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + int bit,disp; + + START_OF_INSTR(); + DECODE_PRINTF("BTC\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval,mask; + u32 *shiftreg; + + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + disp = (s16)*shiftreg >> 5; + srcval = fetch_data_long(srcoffset+disp); + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_long(srcoffset+disp, srcval ^ mask); + } else { + u16 srcval,mask; + u16 *shiftreg; + + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + disp = (s16)*shiftreg >> 4; + srcval = fetch_data_word(srcoffset+disp); + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(srcval & mask,F_CF); + store_data_word(srcoffset+disp, (u16)(srcval ^ mask)); + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg,*shiftreg; + u32 mask; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0x1F; + mask = (0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg ^= mask; + } else { + u16 *srcreg,*shiftreg; + u16 mask; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + shiftreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + bit = *shiftreg & 0xF; + mask = (u16)(0x1 << bit); + CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF); + *srcreg ^= mask; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xbc +****************************************************************************/ +void x86emuOp2_bsf(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("BSF\n"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval, *dstreg; + + dstreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + srcval = fetch_data_long(srcoffset); + CONDITIONAL_SET_FLAG(srcval == 0, F_ZF); + for(*dstreg = 0; *dstreg < 32; (*dstreg)++) + if ((srcval >> *dstreg) & 1) break; + } else { + u16 srcval, *dstreg; + + dstreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + srcval = fetch_data_word(srcoffset); + CONDITIONAL_SET_FLAG(srcval == 0, F_ZF); + for(*dstreg = 0; *dstreg < 16; (*dstreg)++) + if ((srcval >> *dstreg) & 1) break; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg, *dstreg; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + dstreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF); + for(*dstreg = 0; *dstreg < 32; (*dstreg)++) + if ((*srcreg >> *dstreg) & 1) break; + } else { + u16 *srcreg, *dstreg; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + dstreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF); + for(*dstreg = 0; *dstreg < 16; (*dstreg)++) + if ((*srcreg >> *dstreg) & 1) break; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xbd +****************************************************************************/ +void x86emuOp2_bsr(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("BSF\n"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + srcoffset = decode_rmXX_address(mod, rl); + DECODE_PRINTF(","); + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 srcval, *dstreg; + + dstreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + srcval = fetch_data_long(srcoffset); + CONDITIONAL_SET_FLAG(srcval == 0, F_ZF); + for(*dstreg = 31; *dstreg > 0; (*dstreg)--) + if ((srcval >> *dstreg) & 1) break; + } else { + u16 srcval, *dstreg; + + dstreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + srcval = fetch_data_word(srcoffset); + CONDITIONAL_SET_FLAG(srcval == 0, F_ZF); + for(*dstreg = 15; *dstreg > 0; (*dstreg)--) + if ((srcval >> *dstreg) & 1) break; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *srcreg, *dstreg; + + srcreg = DECODE_RM_LONG_REGISTER(rl); + DECODE_PRINTF(","); + dstreg = DECODE_RM_LONG_REGISTER(rh); + TRACE_AND_STEP(); + CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF); + for(*dstreg = 31; *dstreg > 0; (*dstreg)--) + if ((*srcreg >> *dstreg) & 1) break; + } else { + u16 *srcreg, *dstreg; + + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF(","); + dstreg = DECODE_RM_WORD_REGISTER(rh); + TRACE_AND_STEP(); + CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF); + for(*dstreg = 15; *dstreg > 0; (*dstreg)--) + if ((*srcreg >> *dstreg) & 1) break; + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xbe +****************************************************************************/ +void x86emuOp2_movsx_byte_R_RM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + + START_OF_INSTR(); + DECODE_PRINTF("MOVSX\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u32 srcval; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = (s32)((s8)fetch_data_byte(srcoffset)); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { + u16 *destreg; + u16 srcval; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = (s16)((s8)fetch_data_byte(srcoffset)); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } + } else { /* register to register */ + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + u32 *destreg; + u8 *srcreg; + + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = (s32)((s8)*srcreg); + } else { + u16 *destreg; + u8 *srcreg; + + destreg = DECODE_RM_WORD_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_BYTE_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = (s16)((s8)*srcreg); + } + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/**************************************************************************** +REMARKS: +Handles opcode 0x0f,0xbf +****************************************************************************/ +void x86emuOp2_movsx_word_R_RM(u8 X86EMU_UNUSED(op2)) +{ + int mod, rl, rh; + uint srcoffset; + u32 *destreg; + u32 srcval; + u16 *srcreg; + + START_OF_INSTR(); + DECODE_PRINTF("MOVSX\t"); + FETCH_DECODE_MODRM(mod, rh, rl); + if (mod < 3) { + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcoffset = decode_rmXX_address(mod, rl); + srcval = (s32)((s16)fetch_data_word(srcoffset)); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = srcval; + } else { /* register to register */ + destreg = DECODE_RM_LONG_REGISTER(rh); + DECODE_PRINTF(","); + srcreg = DECODE_RM_WORD_REGISTER(rl); + DECODE_PRINTF("\n"); + TRACE_AND_STEP(); + *destreg = (s32)((s16)*srcreg); + } + DECODE_CLEAR_SEGOVR(); + END_OF_INSTR(); +} + +/*************************************************************************** + * Double byte operation code table: + **************************************************************************/ +void (*x86emu_optab2[256])(u8) __attribute__((section(".got2"))) = +{ +/* 0x00 */ x86emuOp2_illegal_op, /* Group F (ring 0 PM) */ +/* 0x01 */ x86emuOp2_illegal_op, /* Group G (ring 0 PM) */ +/* 0x02 */ x86emuOp2_illegal_op, /* lar (ring 0 PM) */ +/* 0x03 */ x86emuOp2_illegal_op, /* lsl (ring 0 PM) */ +/* 0x04 */ x86emuOp2_illegal_op, +/* 0x05 */ x86emuOp2_illegal_op, /* loadall (undocumented) */ +/* 0x06 */ x86emuOp2_illegal_op, /* clts (ring 0 PM) */ +/* 0x07 */ x86emuOp2_illegal_op, /* loadall (undocumented) */ +/* 0x08 */ x86emuOp2_illegal_op, /* invd (ring 0 PM) */ +/* 0x09 */ x86emuOp2_illegal_op, /* wbinvd (ring 0 PM) */ +/* 0x0a */ x86emuOp2_illegal_op, +/* 0x0b */ x86emuOp2_illegal_op, +/* 0x0c */ x86emuOp2_illegal_op, +/* 0x0d */ x86emuOp2_illegal_op, +/* 0x0e */ x86emuOp2_illegal_op, +/* 0x0f */ x86emuOp2_illegal_op, + +/* 0x10 */ x86emuOp2_illegal_op, +/* 0x11 */ x86emuOp2_illegal_op, +/* 0x12 */ x86emuOp2_illegal_op, +/* 0x13 */ x86emuOp2_illegal_op, +/* 0x14 */ x86emuOp2_illegal_op, +/* 0x15 */ x86emuOp2_illegal_op, +/* 0x16 */ x86emuOp2_illegal_op, +/* 0x17 */ x86emuOp2_illegal_op, +/* 0x18 */ x86emuOp2_illegal_op, +/* 0x19 */ x86emuOp2_illegal_op, +/* 0x1a */ x86emuOp2_illegal_op, +/* 0x1b */ x86emuOp2_illegal_op, +/* 0x1c */ x86emuOp2_illegal_op, +/* 0x1d */ x86emuOp2_illegal_op, +/* 0x1e */ x86emuOp2_illegal_op, +/* 0x1f */ x86emuOp2_illegal_op, + +/* 0x20 */ x86emuOp2_illegal_op, /* mov reg32,creg (ring 0 PM) */ +/* 0x21 */ x86emuOp2_illegal_op, /* mov reg32,dreg (ring 0 PM) */ +/* 0x22 */ x86emuOp2_illegal_op, /* mov creg,reg32 (ring 0 PM) */ +/* 0x23 */ x86emuOp2_illegal_op, /* mov dreg,reg32 (ring 0 PM) */ +/* 0x24 */ x86emuOp2_illegal_op, /* mov reg32,treg (ring 0 PM) */ +/* 0x25 */ x86emuOp2_illegal_op, +/* 0x26 */ x86emuOp2_illegal_op, /* mov treg,reg32 (ring 0 PM) */ +/* 0x27 */ x86emuOp2_illegal_op, +/* 0x28 */ x86emuOp2_illegal_op, +/* 0x29 */ x86emuOp2_illegal_op, +/* 0x2a */ x86emuOp2_illegal_op, +/* 0x2b */ x86emuOp2_illegal_op, +/* 0x2c */ x86emuOp2_illegal_op, +/* 0x2d */ x86emuOp2_illegal_op, +/* 0x2e */ x86emuOp2_illegal_op, +/* 0x2f */ x86emuOp2_illegal_op, + +/* 0x30 */ x86emuOp2_illegal_op, +/* 0x31 */ x86emuOp2_illegal_op, +/* 0x32 */ x86emuOp2_illegal_op, +/* 0x33 */ x86emuOp2_illegal_op, +/* 0x34 */ x86emuOp2_illegal_op, +/* 0x35 */ x86emuOp2_illegal_op, +/* 0x36 */ x86emuOp2_illegal_op, +/* 0x37 */ x86emuOp2_illegal_op, +/* 0x38 */ x86emuOp2_illegal_op, +/* 0x39 */ x86emuOp2_illegal_op, +/* 0x3a */ x86emuOp2_illegal_op, +/* 0x3b */ x86emuOp2_illegal_op, +/* 0x3c */ x86emuOp2_illegal_op, +/* 0x3d */ x86emuOp2_illegal_op, +/* 0x3e */ x86emuOp2_illegal_op, +/* 0x3f */ x86emuOp2_illegal_op, + +/* 0x40 */ x86emuOp2_illegal_op, +/* 0x41 */ x86emuOp2_illegal_op, +/* 0x42 */ x86emuOp2_illegal_op, +/* 0x43 */ x86emuOp2_illegal_op, +/* 0x44 */ x86emuOp2_illegal_op, +/* 0x45 */ x86emuOp2_illegal_op, +/* 0x46 */ x86emuOp2_illegal_op, +/* 0x47 */ x86emuOp2_illegal_op, +/* 0x48 */ x86emuOp2_illegal_op, +/* 0x49 */ x86emuOp2_illegal_op, +/* 0x4a */ x86emuOp2_illegal_op, +/* 0x4b */ x86emuOp2_illegal_op, +/* 0x4c */ x86emuOp2_illegal_op, +/* 0x4d */ x86emuOp2_illegal_op, +/* 0x4e */ x86emuOp2_illegal_op, +/* 0x4f */ x86emuOp2_illegal_op, + +/* 0x50 */ x86emuOp2_illegal_op, +/* 0x51 */ x86emuOp2_illegal_op, +/* 0x52 */ x86emuOp2_illegal_op, +/* 0x53 */ x86emuOp2_illegal_op, +/* 0x54 */ x86emuOp2_illegal_op, +/* 0x55 */ x86emuOp2_illegal_op, +/* 0x56 */ x86emuOp2_illegal_op, +/* 0x57 */ x86emuOp2_illegal_op, +/* 0x58 */ x86emuOp2_illegal_op, +/* 0x59 */ x86emuOp2_illegal_op, +/* 0x5a */ x86emuOp2_illegal_op, +/* 0x5b */ x86emuOp2_illegal_op, +/* 0x5c */ x86emuOp2_illegal_op, +/* 0x5d */ x86emuOp2_illegal_op, +/* 0x5e */ x86emuOp2_illegal_op, +/* 0x5f */ x86emuOp2_illegal_op, + +/* 0x60 */ x86emuOp2_illegal_op, +/* 0x61 */ x86emuOp2_illegal_op, +/* 0x62 */ x86emuOp2_illegal_op, +/* 0x63 */ x86emuOp2_illegal_op, +/* 0x64 */ x86emuOp2_illegal_op, +/* 0x65 */ x86emuOp2_illegal_op, +/* 0x66 */ x86emuOp2_illegal_op, +/* 0x67 */ x86emuOp2_illegal_op, +/* 0x68 */ x86emuOp2_illegal_op, +/* 0x69 */ x86emuOp2_illegal_op, +/* 0x6a */ x86emuOp2_illegal_op, +/* 0x6b */ x86emuOp2_illegal_op, +/* 0x6c */ x86emuOp2_illegal_op, +/* 0x6d */ x86emuOp2_illegal_op, +/* 0x6e */ x86emuOp2_illegal_op, +/* 0x6f */ x86emuOp2_illegal_op, + +/* 0x70 */ x86emuOp2_illegal_op, +/* 0x71 */ x86emuOp2_illegal_op, +/* 0x72 */ x86emuOp2_illegal_op, +/* 0x73 */ x86emuOp2_illegal_op, +/* 0x74 */ x86emuOp2_illegal_op, +/* 0x75 */ x86emuOp2_illegal_op, +/* 0x76 */ x86emuOp2_illegal_op, +/* 0x77 */ x86emuOp2_illegal_op, +/* 0x78 */ x86emuOp2_illegal_op, +/* 0x79 */ x86emuOp2_illegal_op, +/* 0x7a */ x86emuOp2_illegal_op, +/* 0x7b */ x86emuOp2_illegal_op, +/* 0x7c */ x86emuOp2_illegal_op, +/* 0x7d */ x86emuOp2_illegal_op, +/* 0x7e */ x86emuOp2_illegal_op, +/* 0x7f */ x86emuOp2_illegal_op, + +/* 0x80 */ x86emuOp2_long_jump, +/* 0x81 */ x86emuOp2_long_jump, +/* 0x82 */ x86emuOp2_long_jump, +/* 0x83 */ x86emuOp2_long_jump, +/* 0x84 */ x86emuOp2_long_jump, +/* 0x85 */ x86emuOp2_long_jump, +/* 0x86 */ x86emuOp2_long_jump, +/* 0x87 */ x86emuOp2_long_jump, +/* 0x88 */ x86emuOp2_long_jump, +/* 0x89 */ x86emuOp2_long_jump, +/* 0x8a */ x86emuOp2_long_jump, +/* 0x8b */ x86emuOp2_long_jump, +/* 0x8c */ x86emuOp2_long_jump, +/* 0x8d */ x86emuOp2_long_jump, +/* 0x8e */ x86emuOp2_long_jump, +/* 0x8f */ x86emuOp2_long_jump, + +/* 0x90 */ x86emuOp2_set_byte, +/* 0x91 */ x86emuOp2_set_byte, +/* 0x92 */ x86emuOp2_set_byte, +/* 0x93 */ x86emuOp2_set_byte, +/* 0x94 */ x86emuOp2_set_byte, +/* 0x95 */ x86emuOp2_set_byte, +/* 0x96 */ x86emuOp2_set_byte, +/* 0x97 */ x86emuOp2_set_byte, +/* 0x98 */ x86emuOp2_set_byte, +/* 0x99 */ x86emuOp2_set_byte, +/* 0x9a */ x86emuOp2_set_byte, +/* 0x9b */ x86emuOp2_set_byte, +/* 0x9c */ x86emuOp2_set_byte, +/* 0x9d */ x86emuOp2_set_byte, +/* 0x9e */ x86emuOp2_set_byte, +/* 0x9f */ x86emuOp2_set_byte, + +/* 0xa0 */ x86emuOp2_push_FS, +/* 0xa1 */ x86emuOp2_pop_FS, +/* 0xa2 */ x86emuOp2_illegal_op, +/* 0xa3 */ x86emuOp2_bt_R, +/* 0xa4 */ x86emuOp2_shld_IMM, +/* 0xa5 */ x86emuOp2_shld_CL, +/* 0xa6 */ x86emuOp2_illegal_op, +/* 0xa7 */ x86emuOp2_illegal_op, +/* 0xa8 */ x86emuOp2_push_GS, +/* 0xa9 */ x86emuOp2_pop_GS, +/* 0xaa */ x86emuOp2_illegal_op, +/* 0xab */ x86emuOp2_bt_R, +/* 0xac */ x86emuOp2_shrd_IMM, +/* 0xad */ x86emuOp2_shrd_CL, +/* 0xae */ x86emuOp2_illegal_op, +/* 0xaf */ x86emuOp2_imul_R_RM, + +/* 0xb0 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */ +/* 0xb1 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */ +/* 0xb2 */ x86emuOp2_lss_R_IMM, +/* 0xb3 */ x86emuOp2_btr_R, +/* 0xb4 */ x86emuOp2_lfs_R_IMM, +/* 0xb5 */ x86emuOp2_lgs_R_IMM, +/* 0xb6 */ x86emuOp2_movzx_byte_R_RM, +/* 0xb7 */ x86emuOp2_movzx_word_R_RM, +/* 0xb8 */ x86emuOp2_illegal_op, +/* 0xb9 */ x86emuOp2_illegal_op, +/* 0xba */ x86emuOp2_btX_I, +/* 0xbb */ x86emuOp2_btc_R, +/* 0xbc */ x86emuOp2_bsf, +/* 0xbd */ x86emuOp2_bsr, +/* 0xbe */ x86emuOp2_movsx_byte_R_RM, +/* 0xbf */ x86emuOp2_movsx_word_R_RM, + +/* 0xc0 */ x86emuOp2_illegal_op, /* TODO: xadd */ +/* 0xc1 */ x86emuOp2_illegal_op, /* TODO: xadd */ +/* 0xc2 */ x86emuOp2_illegal_op, +/* 0xc3 */ x86emuOp2_illegal_op, +/* 0xc4 */ x86emuOp2_illegal_op, +/* 0xc5 */ x86emuOp2_illegal_op, +/* 0xc6 */ x86emuOp2_illegal_op, +/* 0xc7 */ x86emuOp2_illegal_op, +/* 0xc8 */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xc9 */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xca */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xcb */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xcc */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xcd */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xce */ x86emuOp2_illegal_op, /* TODO: bswap */ +/* 0xcf */ x86emuOp2_illegal_op, /* TODO: bswap */ + +/* 0xd0 */ x86emuOp2_illegal_op, +/* 0xd1 */ x86emuOp2_illegal_op, +/* 0xd2 */ x86emuOp2_illegal_op, +/* 0xd3 */ x86emuOp2_illegal_op, +/* 0xd4 */ x86emuOp2_illegal_op, +/* 0xd5 */ x86emuOp2_illegal_op, +/* 0xd6 */ x86emuOp2_illegal_op, +/* 0xd7 */ x86emuOp2_illegal_op, +/* 0xd8 */ x86emuOp2_illegal_op, +/* 0xd9 */ x86emuOp2_illegal_op, +/* 0xda */ x86emuOp2_illegal_op, +/* 0xdb */ x86emuOp2_illegal_op, +/* 0xdc */ x86emuOp2_illegal_op, +/* 0xdd */ x86emuOp2_illegal_op, +/* 0xde */ x86emuOp2_illegal_op, +/* 0xdf */ x86emuOp2_illegal_op, + +/* 0xe0 */ x86emuOp2_illegal_op, +/* 0xe1 */ x86emuOp2_illegal_op, +/* 0xe2 */ x86emuOp2_illegal_op, +/* 0xe3 */ x86emuOp2_illegal_op, +/* 0xe4 */ x86emuOp2_illegal_op, +/* 0xe5 */ x86emuOp2_illegal_op, +/* 0xe6 */ x86emuOp2_illegal_op, +/* 0xe7 */ x86emuOp2_illegal_op, +/* 0xe8 */ x86emuOp2_illegal_op, +/* 0xe9 */ x86emuOp2_illegal_op, +/* 0xea */ x86emuOp2_illegal_op, +/* 0xeb */ x86emuOp2_illegal_op, +/* 0xec */ x86emuOp2_illegal_op, +/* 0xed */ x86emuOp2_illegal_op, +/* 0xee */ x86emuOp2_illegal_op, +/* 0xef */ x86emuOp2_illegal_op, + +/* 0xf0 */ x86emuOp2_illegal_op, +/* 0xf1 */ x86emuOp2_illegal_op, +/* 0xf2 */ x86emuOp2_illegal_op, +/* 0xf3 */ x86emuOp2_illegal_op, +/* 0xf4 */ x86emuOp2_illegal_op, +/* 0xf5 */ x86emuOp2_illegal_op, +/* 0xf6 */ x86emuOp2_illegal_op, +/* 0xf7 */ x86emuOp2_illegal_op, +/* 0xf8 */ x86emuOp2_illegal_op, +/* 0xf9 */ x86emuOp2_illegal_op, +/* 0xfa */ x86emuOp2_illegal_op, +/* 0xfb */ x86emuOp2_illegal_op, +/* 0xfc */ x86emuOp2_illegal_op, +/* 0xfd */ x86emuOp2_illegal_op, +/* 0xfe */ x86emuOp2_illegal_op, +/* 0xff */ x86emuOp2_illegal_op, +}; diff --git a/drivers/bios_emulator/x86emu/prim_ops.c b/drivers/bios_emulator/x86emu/prim_ops.c new file mode 100644 index 0000000..dc8cea8 --- /dev/null +++ b/drivers/bios_emulator/x86emu/prim_ops.c @@ -0,0 +1,2446 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file contains the code to implement the primitive +* machine operations used by the emulation code in ops.c +* +* Carry Chain Calculation +* +* This represents a somewhat expensive calculation which is +* apparently required to emulate the setting of the OF343364 and AF flag. +* The latter is not so important, but the former is. The overflow +* flag is the XOR of the top two bits of the carry chain for an +* addition (similar for subtraction). Since we do not want to +* simulate the addition in a bitwise manner, we try to calculate the +* carry chain given the two operands and the result. +* +* So, given the following table, which represents the addition of two +* bits, we can derive a formula for the carry chain. +* +* a b cin r cout +* 0 0 0 0 0 +* 0 0 1 1 0 +* 0 1 0 1 0 +* 0 1 1 0 1 +* 1 0 0 1 0 +* 1 0 1 0 1 +* 1 1 0 0 1 +* 1 1 1 1 1 +* +* Construction of table for cout: +* +* ab +* r \ 00 01 11 10 +* |------------------ +* 0 | 0 1 1 1 +* 1 | 0 0 1 0 +* +* By inspection, one gets: cc = ab + r'(a + b) +* +* That represents alot of operations, but NO CHOICE.... +* +* Borrow Chain Calculation. +* +* The following table represents the subtraction of two bits, from +* which we can derive a formula for the borrow chain. +* +* a b bin r bout +* 0 0 0 0 0 +* 0 0 1 1 1 +* 0 1 0 1 1 +* 0 1 1 0 1 +* 1 0 0 1 0 +* 1 0 1 0 0 +* 1 1 0 0 0 +* 1 1 1 1 1 +* +* Construction of table for cout: +* +* ab +* r \ 00 01 11 10 +* |------------------ +* 0 | 0 1 0 0 +* 1 | 1 1 1 0 +* +* By inspection, one gets: bc = a'b + r(a' + b) +* +****************************************************************************/ + +#define PRIM_OPS_NO_REDEFINE_ASM +#include "x86emu/x86emui.h" + +/*------------------------- Global Variables ------------------------------*/ + +static u32 x86emu_parity_tab[8] = +{ + 0x96696996, + 0x69969669, + 0x69969669, + 0x96696996, + 0x69969669, + 0x96696996, + 0x96696996, + 0x69969669, +}; + +#define PARITY(x) (((x86emu_parity_tab[(x) / 32] >> ((x) % 32)) & 1) == 0) +#define XOR2(x) (((x) ^ ((x)>>1)) & 0x1) +/*----------------------------- Implementation ----------------------------*/ +int abs(int v) +{ + return (v>0)?v:-v; +} + +/*----------------------------- Implementation ----------------------------*/ + + +/*--------- Side effects helper functions -------*/ + +/**************************************************************************** +REMARKS: +implements side efects for byte operations that don't overflow +****************************************************************************/ + +static void set_parity_flag(u32 res) +{ + CONDITIONAL_SET_FLAG(PARITY(res & 0xFF), F_PF); +} + +static void set_szp_flags_8(u8 res) +{ + CONDITIONAL_SET_FLAG(res & 0x80, F_SF); + CONDITIONAL_SET_FLAG(res == 0, F_ZF); + set_parity_flag(res); +} + +static void set_szp_flags_16(u16 res) +{ + CONDITIONAL_SET_FLAG(res & 0x8000, F_SF); + CONDITIONAL_SET_FLAG(res == 0, F_ZF); + set_parity_flag(res); +} + +static void set_szp_flags_32(u32 res) +{ + CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF); + CONDITIONAL_SET_FLAG(res == 0, F_ZF); + set_parity_flag(res); +} + +static void no_carry_byte_side_eff(u8 res) +{ + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + set_szp_flags_8(res); +} + +static void no_carry_word_side_eff(u16 res) +{ + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + set_szp_flags_16(res); +} + +static void no_carry_long_side_eff(u32 res) +{ + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + set_szp_flags_32(res); +} + +static void calc_carry_chain(int bits, u32 d, u32 s, u32 res, int set_carry) +{ + u32 cc; + + cc = (s & d) | ((~res) & (s | d)); + CONDITIONAL_SET_FLAG(XOR2(cc >> (bits - 2)), F_OF); + CONDITIONAL_SET_FLAG(cc & 0x8, F_AF); + if (set_carry) { + CONDITIONAL_SET_FLAG(res & (1 << bits), F_CF); + } +} + +static void calc_borrow_chain(int bits, u32 d, u32 s, u32 res, int set_carry) +{ + u32 bc; + + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(XOR2(bc >> (bits - 2)), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + if (set_carry) { + CONDITIONAL_SET_FLAG(bc & (1 << (bits - 1)), F_CF); + } +} + +/**************************************************************************** +REMARKS: +Implements the AAA instruction and side effects. +****************************************************************************/ +u16 aaa_word(u16 d) +{ + u16 res; + if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) { + d += 0x6; + d += 0x100; + SET_FLAG(F_AF); + SET_FLAG(F_CF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + } + res = (u16)(d & 0xFF0F); + set_szp_flags_16(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the AAA instruction and side effects. +****************************************************************************/ +u16 aas_word(u16 d) +{ + u16 res; + if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) { + d -= 0x6; + d -= 0x100; + SET_FLAG(F_AF); + SET_FLAG(F_CF); + } else { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + } + res = (u16)(d & 0xFF0F); + set_szp_flags_16(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the AAD instruction and side effects. +****************************************************************************/ +u16 aad_word(u16 d) +{ + u16 l; + u8 hb, lb; + + hb = (u8)((d >> 8) & 0xff); + lb = (u8)((d & 0xff)); + l = (u16)((lb + 10 * hb) & 0xFF); + + no_carry_byte_side_eff(l & 0xFF); + return l; +} + +/**************************************************************************** +REMARKS: +Implements the AAM instruction and side effects. +****************************************************************************/ +u16 aam_word(u8 d) +{ + u16 h, l; + + h = (u16)(d / 10); + l = (u16)(d % 10); + l |= (u16)(h << 8); + + no_carry_byte_side_eff(l & 0xFF); + return l; +} + +/**************************************************************************** +REMARKS: +Implements the ADC instruction and side effects. +****************************************************************************/ +u8 adc_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + + res = d + s; + if (ACCESS_FLAG(F_CF)) res++; + + set_szp_flags_8(res); + calc_carry_chain(8,s,d,res,1); + + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the ADC instruction and side effects. +****************************************************************************/ +u16 adc_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + + res = d + s; + if (ACCESS_FLAG(F_CF)) + res++; + + set_szp_flags_16((u16)res); + calc_carry_chain(16,s,d,res,1); + + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the ADC instruction and side effects. +****************************************************************************/ +u32 adc_long(u32 d, u32 s) +{ + u32 lo; /* all operands in native machine order */ + u32 hi; + u32 res; + + lo = (d & 0xFFFF) + (s & 0xFFFF); + res = d + s; + + if (ACCESS_FLAG(F_CF)) { + lo++; + res++; + } + + hi = (lo >> 16) + (d >> 16) + (s >> 16); + + set_szp_flags_32(res); + calc_carry_chain(32,s,d,res,0); + + CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the ADD instruction and side effects. +****************************************************************************/ +u8 add_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + + res = d + s; + set_szp_flags_8((u8)res); + calc_carry_chain(8,s,d,res,1); + + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the ADD instruction and side effects. +****************************************************************************/ +u16 add_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + + res = d + s; + set_szp_flags_16((u16)res); + calc_carry_chain(16,s,d,res,1); + + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the ADD instruction and side effects. +****************************************************************************/ +u32 add_long(u32 d, u32 s) +{ + u32 res; + + res = d + s; + set_szp_flags_32(res); + calc_carry_chain(32,s,d,res,0); + + CONDITIONAL_SET_FLAG(res < d || res < s, F_CF); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the AND instruction and side effects. +****************************************************************************/ +u8 and_byte(u8 d, u8 s) +{ + u8 res; /* all operands in native machine order */ + + res = d & s; + + no_carry_byte_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the AND instruction and side effects. +****************************************************************************/ +u16 and_word(u16 d, u16 s) +{ + u16 res; /* all operands in native machine order */ + + res = d & s; + + no_carry_word_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the AND instruction and side effects. +****************************************************************************/ +u32 and_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + + res = d & s; + no_carry_long_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the CMP instruction and side effects. +****************************************************************************/ +u8 cmp_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + + res = d - s; + set_szp_flags_8((u8)res); + calc_borrow_chain(8, d, s, res, 1); + + return d; +} + +/**************************************************************************** +REMARKS: +Implements the CMP instruction and side effects. +****************************************************************************/ +u16 cmp_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + + res = d - s; + set_szp_flags_16((u16)res); + calc_borrow_chain(16, d, s, res, 1); + + return d; +} + +/**************************************************************************** +REMARKS: +Implements the CMP instruction and side effects. +****************************************************************************/ +u32 cmp_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + + res = d - s; + set_szp_flags_32(res); + calc_borrow_chain(32, d, s, res, 1); + + return d; +} + +/**************************************************************************** +REMARKS: +Implements the DAA instruction and side effects. +****************************************************************************/ +u8 daa_byte(u8 d) +{ + u32 res = d; + if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) { + res += 6; + SET_FLAG(F_AF); + } + if (res > 0x9F || ACCESS_FLAG(F_CF)) { + res += 0x60; + SET_FLAG(F_CF); + } + set_szp_flags_8((u8)res); + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the DAS instruction and side effects. +****************************************************************************/ +u8 das_byte(u8 d) +{ + if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) { + d -= 6; + SET_FLAG(F_AF); + } + if (d > 0x9F || ACCESS_FLAG(F_CF)) { + d -= 0x60; + SET_FLAG(F_CF); + } + set_szp_flags_8(d); + return d; +} + +/**************************************************************************** +REMARKS: +Implements the DEC instruction and side effects. +****************************************************************************/ +u8 dec_byte(u8 d) +{ + u32 res; /* all operands in native machine order */ + + res = d - 1; + set_szp_flags_8((u8)res); + calc_borrow_chain(8, d, 1, res, 0); + + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the DEC instruction and side effects. +****************************************************************************/ +u16 dec_word(u16 d) +{ + u32 res; /* all operands in native machine order */ + + res = d - 1; + set_szp_flags_16((u16)res); + calc_borrow_chain(16, d, 1, res, 0); + + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the DEC instruction and side effects. +****************************************************************************/ +u32 dec_long(u32 d) +{ + u32 res; /* all operands in native machine order */ + + res = d - 1; + + set_szp_flags_32(res); + calc_borrow_chain(32, d, 1, res, 0); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the INC instruction and side effects. +****************************************************************************/ +u8 inc_byte(u8 d) +{ + u32 res; /* all operands in native machine order */ + + res = d + 1; + set_szp_flags_8((u8)res); + calc_carry_chain(8, d, 1, res, 0); + + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the INC instruction and side effects. +****************************************************************************/ +u16 inc_word(u16 d) +{ + u32 res; /* all operands in native machine order */ + + res = d + 1; + set_szp_flags_16((u16)res); + calc_carry_chain(16, d, 1, res, 0); + + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the INC instruction and side effects. +****************************************************************************/ +u32 inc_long(u32 d) +{ + u32 res; /* all operands in native machine order */ + + res = d + 1; + set_szp_flags_32(res); + calc_carry_chain(32, d, 1, res, 0); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u8 or_byte(u8 d, u8 s) +{ + u8 res; /* all operands in native machine order */ + + res = d | s; + no_carry_byte_side_eff(res); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u16 or_word(u16 d, u16 s) +{ + u16 res; /* all operands in native machine order */ + + res = d | s; + no_carry_word_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u32 or_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + + res = d | s; + no_carry_long_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u8 neg_byte(u8 s) +{ + u8 res; + + CONDITIONAL_SET_FLAG(s != 0, F_CF); + res = (u8)-s; + set_szp_flags_8(res); + calc_borrow_chain(8, 0, s, res, 0); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u16 neg_word(u16 s) +{ + u16 res; + + CONDITIONAL_SET_FLAG(s != 0, F_CF); + res = (u16)-s; + set_szp_flags_16((u16)res); + calc_borrow_chain(16, 0, s, res, 0); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the OR instruction and side effects. +****************************************************************************/ +u32 neg_long(u32 s) +{ + u32 res; + + CONDITIONAL_SET_FLAG(s != 0, F_CF); + res = (u32)-s; + set_szp_flags_32(res); + calc_borrow_chain(32, 0, s, res, 0); + + return res; +} + +/**************************************************************************** +REMARKS: +Implements the NOT instruction and side effects. +****************************************************************************/ +u8 not_byte(u8 s) +{ + return ~s; +} + +/**************************************************************************** +REMARKS: +Implements the NOT instruction and side effects. +****************************************************************************/ +u16 not_word(u16 s) +{ + return ~s; +} + +/**************************************************************************** +REMARKS: +Implements the NOT instruction and side effects. +****************************************************************************/ +u32 not_long(u32 s) +{ + return ~s; +} + +/**************************************************************************** +REMARKS: +Implements the RCL instruction and side effects. +****************************************************************************/ +u8 rcl_byte(u8 d, u8 s) +{ + unsigned int res, cnt, mask, cf; + + /* s is the rotate distance. It varies from 0 - 8. */ + /* have + + CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0 + + want to rotate through the carry by "s" bits. We could + loop, but that's inefficient. So the width is 9, + and we split into three parts: + + The new carry flag (was B_n) + the stuff in B_n-1 .. B_0 + the stuff in B_7 .. B_n+1 + + The new rotate is done mod 9, and given this, + for a rotation of n bits (mod 9) the new carry flag is + then located n bits from the MSB. The low part is + then shifted up cnt bits, and the high part is or'd + in. Using CAPS for new values, and lowercase for the + original values, this can be expressed as: + + IF n > 0 + 1) CF <- b_(8-n) + 2) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0 + 3) B_(n-1) <- cf + 4) B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1)) + */ + res = d; + if ((cnt = s % 9) != 0) { + /* extract the new CARRY FLAG. */ + /* CF <- b_(8-n) */ + cf = (d >> (8 - cnt)) & 0x1; + + /* get the low stuff which rotated + into the range B_7 .. B_cnt */ + /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0 */ + /* note that the right hand side done by the mask */ + res = (d << cnt) & 0xff; + + /* now the high stuff which rotated around + into the positions B_cnt-2 .. B_0 */ + /* B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1)) */ + /* shift it downward, 7-(n-2) = 9-n positions. + and mask off the result before or'ing in. + */ + mask = (1 << (cnt - 1)) - 1; + res |= (d >> (9 - cnt)) & mask; + + /* if the carry flag was set, or it in. */ + if (ACCESS_FLAG(F_CF)) { /* carry flag is set */ + /* B_(n-1) <- cf */ + res |= 1 << (cnt - 1); + } + /* set the new carry flag, based on the variable "cf" */ + CONDITIONAL_SET_FLAG(cf, F_CF); + /* OVERFLOW is set *IFF* cnt==1, then it is the + xor of CF and the most significant bit. Blecck. */ + /* parenthesized this expression since it appears to + be causing OF to be misset */ + CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 6) & 0x2)), + F_OF); + + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the RCL instruction and side effects. +****************************************************************************/ +u16 rcl_word(u16 d, u8 s) +{ + unsigned int res, cnt, mask, cf; + + res = d; + if ((cnt = s % 17) != 0) { + cf = (d >> (16 - cnt)) & 0x1; + res = (d << cnt) & 0xffff; + mask = (1 << (cnt - 1)) - 1; + res |= (d >> (17 - cnt)) & mask; + if (ACCESS_FLAG(F_CF)) { + res |= 1 << (cnt - 1); + } + CONDITIONAL_SET_FLAG(cf, F_CF); + CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 14) & 0x2)), + F_OF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the RCL instruction and side effects. +****************************************************************************/ +u32 rcl_long(u32 d, u8 s) +{ + u32 res, cnt, mask, cf; + + res = d; + if ((cnt = s % 33) != 0) { + cf = (d >> (32 - cnt)) & 0x1; + res = (d << cnt) & 0xffffffff; + mask = (1 << (cnt - 1)) - 1; + res |= (d >> (33 - cnt)) & mask; + if (ACCESS_FLAG(F_CF)) { /* carry flag is set */ + res |= 1 << (cnt - 1); + } + CONDITIONAL_SET_FLAG(cf, F_CF); + CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 30) & 0x2)), + F_OF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the RCR instruction and side effects. +****************************************************************************/ +u8 rcr_byte(u8 d, u8 s) +{ + u32 res, cnt; + u32 mask, cf, ocf = 0; + + /* rotate right through carry */ + /* + s is the rotate distance. It varies from 0 - 8. + d is the byte object rotated. + + have + + CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0 + + The new rotate is done mod 9, and given this, + for a rotation of n bits (mod 9) the new carry flag is + then located n bits from the LSB. The low part is + then shifted up cnt bits, and the high part is or'd + in. Using CAPS for new values, and lowercase for the + original values, this can be expressed as: + + IF n > 0 + 1) CF <- b_(n-1) + 2) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n) + 3) B_(8-n) <- cf + 4) B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0) + */ + res = d; + if ((cnt = s % 9) != 0) { + /* extract the new CARRY FLAG. */ + /* CF <- b_(n-1) */ + if (cnt == 1) { + cf = d & 0x1; + /* note hackery here. Access_flag(..) evaluates to either + 0 if flag not set + non-zero if flag is set. + doing access_flag(..) != 0 casts that into either + 0..1 in any representation of the flags register + (i.e. packed bit array or unpacked.) + */ + ocf = ACCESS_FLAG(F_CF) != 0; + } else + cf = (d >> (cnt - 1)) & 0x1; + + /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_n */ + /* note that the right hand side done by the mask + This is effectively done by shifting the + object to the right. The result must be masked, + in case the object came in and was treated + as a negative number. Needed??? */ + + mask = (1 << (8 - cnt)) - 1; + res = (d >> cnt) & mask; + + /* now the high stuff which rotated around + into the positions B_cnt-2 .. B_0 */ + /* B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0) */ + /* shift it downward, 7-(n-2) = 9-n positions. + and mask off the result before or'ing in. + */ + res |= (d << (9 - cnt)); + + /* if the carry flag was set, or it in. */ + if (ACCESS_FLAG(F_CF)) { /* carry flag is set */ + /* B_(8-n) <- cf */ + res |= 1 << (8 - cnt); + } + /* set the new carry flag, based on the variable "cf" */ + CONDITIONAL_SET_FLAG(cf, F_CF); + /* OVERFLOW is set *IFF* cnt==1, then it is the + xor of CF and the most significant bit. Blecck. */ + /* parenthesized... */ + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 6) & 0x2)), + F_OF); + } + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the RCR instruction and side effects. +****************************************************************************/ +u16 rcr_word(u16 d, u8 s) +{ + u32 res, cnt; + u32 mask, cf, ocf = 0; + + /* rotate right through carry */ + res = d; + if ((cnt = s % 17) != 0) { + if (cnt == 1) { + cf = d & 0x1; + ocf = ACCESS_FLAG(F_CF) != 0; + } else + cf = (d >> (cnt - 1)) & 0x1; + mask = (1 << (16 - cnt)) - 1; + res = (d >> cnt) & mask; + res |= (d << (17 - cnt)); + if (ACCESS_FLAG(F_CF)) { + res |= 1 << (16 - cnt); + } + CONDITIONAL_SET_FLAG(cf, F_CF); + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 14) & 0x2)), + F_OF); + } + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the RCR instruction and side effects. +****************************************************************************/ +u32 rcr_long(u32 d, u8 s) +{ + u32 res, cnt; + u32 mask, cf, ocf = 0; + + /* rotate right through carry */ + res = d; + if ((cnt = s % 33) != 0) { + if (cnt == 1) { + cf = d & 0x1; + ocf = ACCESS_FLAG(F_CF) != 0; + } else + cf = (d >> (cnt - 1)) & 0x1; + mask = (1 << (32 - cnt)) - 1; + res = (d >> cnt) & mask; + if (cnt != 1) + res |= (d << (33 - cnt)); + if (ACCESS_FLAG(F_CF)) { /* carry flag is set */ + res |= 1 << (32 - cnt); + } + CONDITIONAL_SET_FLAG(cf, F_CF); + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 30) & 0x2)), + F_OF); + } + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the ROL instruction and side effects. +****************************************************************************/ +u8 rol_byte(u8 d, u8 s) +{ + unsigned int res, cnt, mask; + + /* rotate left */ + /* + s is the rotate distance. It varies from 0 - 8. + d is the byte object rotated. + + have + + CF B_7 ... B_0 + + The new rotate is done mod 8. + Much simpler than the "rcl" or "rcr" operations. + + IF n > 0 + 1) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0) + 2) B_(n-1) .. B_(0) <- b_(7) .. b_(8-n) + */ + res = d; + if ((cnt = s % 8) != 0) { + /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0) */ + res = (d << cnt); + + /* B_(n-1) .. B_(0) <- b_(7) .. b_(8-n) */ + mask = (1 << cnt) - 1; + res |= (d >> (8 - cnt)) & mask; + + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + /* OVERFLOW is set *IFF* s==1, then it is the + xor of CF and the most significant bit. Blecck. */ + CONDITIONAL_SET_FLAG(s == 1 && + XOR2((res & 0x1) + ((res >> 6) & 0x2)), + F_OF); + } if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the ROL instruction and side effects. +****************************************************************************/ +u16 rol_word(u16 d, u8 s) +{ + unsigned int res, cnt, mask; + + res = d; + if ((cnt = s % 16) != 0) { + res = (d << cnt); + mask = (1 << cnt) - 1; + res |= (d >> (16 - cnt)) & mask; + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + CONDITIONAL_SET_FLAG(s == 1 && + XOR2((res & 0x1) + ((res >> 14) & 0x2)), + F_OF); + } if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the ROL instruction and side effects. +****************************************************************************/ +u32 rol_long(u32 d, u8 s) +{ + u32 res, cnt, mask; + + res = d; + if ((cnt = s % 32) != 0) { + res = (d << cnt); + mask = (1 << cnt) - 1; + res |= (d >> (32 - cnt)) & mask; + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + CONDITIONAL_SET_FLAG(s == 1 && + XOR2((res & 0x1) + ((res >> 30) & 0x2)), + F_OF); + } if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x1, F_CF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the ROR instruction and side effects. +****************************************************************************/ +u8 ror_byte(u8 d, u8 s) +{ + unsigned int res, cnt, mask; + + /* rotate right */ + /* + s is the rotate distance. It varies from 0 - 8. + d is the byte object rotated. + + have + + B_7 ... B_0 + + The rotate is done mod 8. + + IF n > 0 + 1) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n) + 2) B_(7) .. B_(8-n) <- b_(n-1) .. b_(0) + */ + res = d; + if ((cnt = s % 8) != 0) { /* not a typo, do nada if cnt==0 */ + /* B_(7) .. B_(8-n) <- b_(n-1) .. b_(0) */ + res = (d << (8 - cnt)); + + /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n) */ + mask = (1 << (8 - cnt)) - 1; + res |= (d >> (cnt)) & mask; + + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x80, F_CF); + /* OVERFLOW is set *IFF* s==1, then it is the + xor of the two most significant bits. Blecck. */ + CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 6), F_OF); + } else if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x80, F_CF); + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the ROR instruction and side effects. +****************************************************************************/ +u16 ror_word(u16 d, u8 s) +{ + unsigned int res, cnt, mask; + + res = d; + if ((cnt = s % 16) != 0) { + res = (d << (16 - cnt)); + mask = (1 << (16 - cnt)) - 1; + res |= (d >> (cnt)) & mask; + CONDITIONAL_SET_FLAG(res & 0x8000, F_CF); + CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 14), F_OF); + } else if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x8000, F_CF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the ROR instruction and side effects. +****************************************************************************/ +u32 ror_long(u32 d, u8 s) +{ + u32 res, cnt, mask; + + res = d; + if ((cnt = s % 32) != 0) { + res = (d << (32 - cnt)); + mask = (1 << (32 - cnt)) - 1; + res |= (d >> (cnt)) & mask; + CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF); + CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 30), F_OF); + } else if (s != 0) { + /* set the new carry flag, Note that it is the low order + bit of the result!!! */ + CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SHL instruction and side effects. +****************************************************************************/ +u8 shl_byte(u8 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 8) { + cnt = s % 8; + + /* last bit shifted out goes into carry flag */ + if (cnt > 0) { + res = d << cnt; + cf = d & (1 << (8 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_8((u8)res); + } else { + res = (u8) d; + } + + if (cnt == 1) { + /* Needs simplification. */ + CONDITIONAL_SET_FLAG( + (((res & 0x80) == 0x80) ^ + (ACCESS_FLAG(F_CF) != 0)), + /* was (M.x86.R_FLG&F_CF)==F_CF)), */ + F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHL instruction and side effects. +****************************************************************************/ +u16 shl_word(u16 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 16) { + cnt = s % 16; + if (cnt > 0) { + res = d << cnt; + cf = d & (1 << (16 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_16((u16)res); + } else { + res = (u16) d; + } + + if (cnt == 1) { + CONDITIONAL_SET_FLAG( + (((res & 0x8000) == 0x8000) ^ + (ACCESS_FLAG(F_CF) != 0)), + F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHL instruction and side effects. +****************************************************************************/ +u32 shl_long(u32 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 32) { + cnt = s % 32; + if (cnt > 0) { + res = d << cnt; + cf = d & (1 << (32 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_32((u32)res); + } else { + res = d; + } + if (cnt == 1) { + CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^ + (ACCESS_FLAG(F_CF) != 0)), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SHR instruction and side effects. +****************************************************************************/ +u8 shr_byte(u8 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 8) { + cnt = s % 8; + if (cnt > 0) { + cf = d & (1 << (cnt - 1)); + res = d >> cnt; + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_8((u8)res); + } else { + res = (u8) d; + } + + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(res >> 6), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d >> (s-1)) & 0x1, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHR instruction and side effects. +****************************************************************************/ +u16 shr_word(u16 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 16) { + cnt = s % 16; + if (cnt > 0) { + cf = d & (1 << (cnt - 1)); + res = d >> cnt; + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_16((u16)res); + } else { + res = d; + } + + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHR instruction and side effects. +****************************************************************************/ +u32 shr_long(u32 d, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 32) { + cnt = s % 32; + if (cnt > 0) { + cf = d & (1 << (cnt - 1)); + res = d >> cnt; + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_32((u32)res); + } else { + res = d; + } + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SAR instruction and side effects. +****************************************************************************/ +u8 sar_byte(u8 d, u8 s) +{ + unsigned int cnt, res, cf, mask, sf; + + res = d; + sf = d & 0x80; + cnt = s % 8; + if (cnt > 0 && cnt < 8) { + mask = (1 << (8 - cnt)) - 1; + cf = d & (1 << (cnt - 1)); + res = (d >> cnt) & mask; + CONDITIONAL_SET_FLAG(cf, F_CF); + if (sf) { + res |= ~mask; + } + set_szp_flags_8((u8)res); + } else if (cnt >= 8) { + if (sf) { + res = 0xff; + SET_FLAG(F_CF); + CLEAR_FLAG(F_ZF); + SET_FLAG(F_SF); + SET_FLAG(F_PF); + } else { + res = 0; + CLEAR_FLAG(F_CF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + } + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the SAR instruction and side effects. +****************************************************************************/ +u16 sar_word(u16 d, u8 s) +{ + unsigned int cnt, res, cf, mask, sf; + + sf = d & 0x8000; + cnt = s % 16; + res = d; + if (cnt > 0 && cnt < 16) { + mask = (1 << (16 - cnt)) - 1; + cf = d & (1 << (cnt - 1)); + res = (d >> cnt) & mask; + CONDITIONAL_SET_FLAG(cf, F_CF); + if (sf) { + res |= ~mask; + } + set_szp_flags_16((u16)res); + } else if (cnt >= 16) { + if (sf) { + res = 0xffff; + SET_FLAG(F_CF); + CLEAR_FLAG(F_ZF); + SET_FLAG(F_SF); + SET_FLAG(F_PF); + } else { + res = 0; + CLEAR_FLAG(F_CF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SAR instruction and side effects. +****************************************************************************/ +u32 sar_long(u32 d, u8 s) +{ + u32 cnt, res, cf, mask, sf; + + sf = d & 0x80000000; + cnt = s % 32; + res = d; + if (cnt > 0 && cnt < 32) { + mask = (1 << (32 - cnt)) - 1; + cf = d & (1 << (cnt - 1)); + res = (d >> cnt) & mask; + CONDITIONAL_SET_FLAG(cf, F_CF); + if (sf) { + res |= ~mask; + } + set_szp_flags_32(res); + } else if (cnt >= 32) { + if (sf) { + res = 0xffffffff; + SET_FLAG(F_CF); + CLEAR_FLAG(F_ZF); + SET_FLAG(F_SF); + SET_FLAG(F_PF); + } else { + res = 0; + CLEAR_FLAG(F_CF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SHLD instruction and side effects. +****************************************************************************/ +u16 shld_word (u16 d, u16 fill, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 16) { + cnt = s % 16; + if (cnt > 0) { + res = (d << cnt) | (fill >> (16-cnt)); + cf = d & (1 << (16 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_16((u16)res); + } else { + res = d; + } + if (cnt == 1) { + CONDITIONAL_SET_FLAG((((res & 0x8000) == 0x8000) ^ + (ACCESS_FLAG(F_CF) != 0)), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHLD instruction and side effects. +****************************************************************************/ +u32 shld_long (u32 d, u32 fill, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 32) { + cnt = s % 32; + if (cnt > 0) { + res = (d << cnt) | (fill >> (32-cnt)); + cf = d & (1 << (32 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_32((u32)res); + } else { + res = d; + } + if (cnt == 1) { + CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^ + (ACCESS_FLAG(F_CF) != 0)), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF); + CLEAR_FLAG(F_OF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_PF); + SET_FLAG(F_ZF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SHRD instruction and side effects. +****************************************************************************/ +u16 shrd_word (u16 d, u16 fill, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 16) { + cnt = s % 16; + if (cnt > 0) { + cf = d & (1 << (cnt - 1)); + res = (d >> cnt) | (fill << (16 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_16((u16)res); + } else { + res = d; + } + + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SHRD instruction and side effects. +****************************************************************************/ +u32 shrd_long (u32 d, u32 fill, u8 s) +{ + unsigned int cnt, res, cf; + + if (s < 32) { + cnt = s % 32; + if (cnt > 0) { + cf = d & (1 << (cnt - 1)); + res = (d >> cnt) | (fill << (32 - cnt)); + CONDITIONAL_SET_FLAG(cf, F_CF); + set_szp_flags_32((u32)res); + } else { + res = d; + } + if (cnt == 1) { + CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF); + } else { + CLEAR_FLAG(F_OF); + } + } else { + res = 0; + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + SET_FLAG(F_ZF); + CLEAR_FLAG(F_SF); + CLEAR_FLAG(F_PF); + } + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SBB instruction and side effects. +****************************************************************************/ +u8 sbb_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + if (ACCESS_FLAG(F_CF)) + res = d - s - 1; + else + res = d - s; + set_szp_flags_8((u8)res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x80, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the SBB instruction and side effects. +****************************************************************************/ +u16 sbb_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + if (ACCESS_FLAG(F_CF)) + res = d - s - 1; + else + res = d - s; + set_szp_flags_16((u16)res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SBB instruction and side effects. +****************************************************************************/ +u32 sbb_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + if (ACCESS_FLAG(F_CF)) + res = d - s - 1; + else + res = d - s; + + set_szp_flags_32(res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the SUB instruction and side effects. +****************************************************************************/ +u8 sub_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + res = d - s; + set_szp_flags_8((u8)res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x80, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return (u8)res; +} + +/**************************************************************************** +REMARKS: +Implements the SUB instruction and side effects. +****************************************************************************/ +u16 sub_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + res = d - s; + set_szp_flags_16((u16)res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return (u16)res; +} + +/**************************************************************************** +REMARKS: +Implements the SUB instruction and side effects. +****************************************************************************/ +u32 sub_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + u32 bc; + + res = d - s; + set_szp_flags_32(res); + + /* calculate the borrow chain. See note at top */ + bc = (res & (~d | s)) | (~d & s); + CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF); + CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF); + CONDITIONAL_SET_FLAG(bc & 0x8, F_AF); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the TEST instruction and side effects. +****************************************************************************/ +void test_byte(u8 d, u8 s) +{ + u32 res; /* all operands in native machine order */ + + res = d & s; + + CLEAR_FLAG(F_OF); + set_szp_flags_8((u8)res); + /* AF == dont care */ + CLEAR_FLAG(F_CF); +} + +/**************************************************************************** +REMARKS: +Implements the TEST instruction and side effects. +****************************************************************************/ +void test_word(u16 d, u16 s) +{ + u32 res; /* all operands in native machine order */ + + res = d & s; + + CLEAR_FLAG(F_OF); + set_szp_flags_16((u16)res); + /* AF == dont care */ + CLEAR_FLAG(F_CF); +} + +/**************************************************************************** +REMARKS: +Implements the TEST instruction and side effects. +****************************************************************************/ +void test_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + + res = d & s; + + CLEAR_FLAG(F_OF); + set_szp_flags_32(res); + /* AF == dont care */ + CLEAR_FLAG(F_CF); +} + +/**************************************************************************** +REMARKS: +Implements the XOR instruction and side effects. +****************************************************************************/ +u8 xor_byte(u8 d, u8 s) +{ + u8 res; /* all operands in native machine order */ + + res = d ^ s; + no_carry_byte_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the XOR instruction and side effects. +****************************************************************************/ +u16 xor_word(u16 d, u16 s) +{ + u16 res; /* all operands in native machine order */ + + res = d ^ s; + no_carry_word_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the XOR instruction and side effects. +****************************************************************************/ +u32 xor_long(u32 d, u32 s) +{ + u32 res; /* all operands in native machine order */ + + res = d ^ s; + no_carry_long_side_eff(res); + return res; +} + +/**************************************************************************** +REMARKS: +Implements the IMUL instruction and side effects. +****************************************************************************/ +void imul_byte(u8 s) +{ + s16 res = (s16)((s8)M.x86.R_AL * (s8)s); + + M.x86.R_AX = res; + if (((M.x86.R_AL & 0x80) == 0 && M.x86.R_AH == 0x00) || + ((M.x86.R_AL & 0x80) != 0 && M.x86.R_AH == 0xFF)) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the IMUL instruction and side effects. +****************************************************************************/ +void imul_word(u16 s) +{ + s32 res = (s16)M.x86.R_AX * (s16)s; + + M.x86.R_AX = (u16)res; + M.x86.R_DX = (u16)(res >> 16); + if (((M.x86.R_AX & 0x8000) == 0 && M.x86.R_DX == 0x0000) || + ((M.x86.R_AX & 0x8000) != 0 && M.x86.R_DX == 0xFFFF)) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the IMUL instruction and side effects. +****************************************************************************/ +void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s) +{ +#ifdef __HAS_LONG_LONG__ + s64 res = (s32)d * (s32)s; + + *res_lo = (u32)res; + *res_hi = (u32)(res >> 32); +#else + u32 d_lo,d_hi,d_sign; + u32 s_lo,s_hi,s_sign; + u32 rlo_lo,rlo_hi,rhi_lo; + + if ((d_sign = d & 0x80000000) != 0) + d = -d; + d_lo = d & 0xFFFF; + d_hi = d >> 16; + if ((s_sign = s & 0x80000000) != 0) + s = -s; + s_lo = s & 0xFFFF; + s_hi = s >> 16; + rlo_lo = d_lo * s_lo; + rlo_hi = (d_hi * s_lo + d_lo * s_hi) + (rlo_lo >> 16); + rhi_lo = d_hi * s_hi + (rlo_hi >> 16); + *res_lo = (rlo_hi << 16) | (rlo_lo & 0xFFFF); + *res_hi = rhi_lo; + if (d_sign != s_sign) { + d = ~*res_lo; + s = (((d & 0xFFFF) + 1) >> 16) + (d >> 16); + *res_lo = ~*res_lo+1; + *res_hi = ~*res_hi+(s >> 16); + } +#endif +} + +/**************************************************************************** +REMARKS: +Implements the IMUL instruction and side effects. +****************************************************************************/ +void imul_long(u32 s) +{ + imul_long_direct(&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s); + if (((M.x86.R_EAX & 0x80000000) == 0 && M.x86.R_EDX == 0x00000000) || + ((M.x86.R_EAX & 0x80000000) != 0 && M.x86.R_EDX == 0xFFFFFFFF)) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the MUL instruction and side effects. +****************************************************************************/ +void mul_byte(u8 s) +{ + u16 res = (u16)(M.x86.R_AL * s); + + M.x86.R_AX = res; + if (M.x86.R_AH == 0) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the MUL instruction and side effects. +****************************************************************************/ +void mul_word(u16 s) +{ + u32 res = M.x86.R_AX * s; + + M.x86.R_AX = (u16)res; + M.x86.R_DX = (u16)(res >> 16); + if (M.x86.R_DX == 0) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the MUL instruction and side effects. +****************************************************************************/ +void mul_long(u32 s) +{ +#ifdef __HAS_LONG_LONG__ + u64 res = (u32)M.x86.R_EAX * (u32)s; + + M.x86.R_EAX = (u32)res; + M.x86.R_EDX = (u32)(res >> 32); +#else + u32 a,a_lo,a_hi; + u32 s_lo,s_hi; + u32 rlo_lo,rlo_hi,rhi_lo; + + a = M.x86.R_EAX; + a_lo = a & 0xFFFF; + a_hi = a >> 16; + s_lo = s & 0xFFFF; + s_hi = s >> 16; + rlo_lo = a_lo * s_lo; + rlo_hi = (a_hi * s_lo + a_lo * s_hi) + (rlo_lo >> 16); + rhi_lo = a_hi * s_hi + (rlo_hi >> 16); + M.x86.R_EAX = (rlo_hi << 16) | (rlo_lo & 0xFFFF); + M.x86.R_EDX = rhi_lo; +#endif + if (M.x86.R_EDX == 0) { + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_OF); + } else { + SET_FLAG(F_CF); + SET_FLAG(F_OF); + } +} + +/**************************************************************************** +REMARKS: +Implements the IDIV instruction and side effects. +****************************************************************************/ +void idiv_byte(u8 s) +{ + s32 dvd, div, mod; + + dvd = (s16)M.x86.R_AX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (s8)s; + mod = dvd % (s8)s; + if (abs(div) > 0x7f) { + x86emu_intr_raise(0); + return; + } + M.x86.R_AL = (s8) div; + M.x86.R_AH = (s8) mod; +} + +/**************************************************************************** +REMARKS: +Implements the IDIV instruction and side effects. +****************************************************************************/ +void idiv_word(u16 s) +{ + s32 dvd, div, mod; + + dvd = (((s32)M.x86.R_DX) << 16) | M.x86.R_AX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (s16)s; + mod = dvd % (s16)s; + if (abs(div) > 0x7fff) { + x86emu_intr_raise(0); + return; + } + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_SF); + CONDITIONAL_SET_FLAG(div == 0, F_ZF); + set_parity_flag(mod); + + M.x86.R_AX = (u16)div; + M.x86.R_DX = (u16)mod; +} + +/**************************************************************************** +REMARKS: +Implements the IDIV instruction and side effects. +****************************************************************************/ +void idiv_long(u32 s) +{ +#ifdef __HAS_LONG_LONG__ + s64 dvd, div, mod; + + dvd = (((s64)M.x86.R_EDX) << 32) | M.x86.R_EAX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (s32)s; + mod = dvd % (s32)s; + if (abs(div) > 0x7fffffff) { + x86emu_intr_raise(0); + return; + } +#else + s32 div = 0, mod; + s32 h_dvd = M.x86.R_EDX; + u32 l_dvd = M.x86.R_EAX; + u32 abs_s = s & 0x7FFFFFFF; + u32 abs_h_dvd = h_dvd & 0x7FFFFFFF; + u32 h_s = abs_s >> 1; + u32 l_s = abs_s << 31; + int counter = 31; + int carry; + + if (s == 0) { + x86emu_intr_raise(0); + return; + } + do { + div <<= 1; + carry = (l_dvd >= l_s) ? 0 : 1; + + if (abs_h_dvd < (h_s + carry)) { + h_s >>= 1; + l_s = abs_s << (--counter); + continue; + } else { + abs_h_dvd -= (h_s + carry); + l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1) + : (l_dvd - l_s); + h_s >>= 1; + l_s = abs_s << (--counter); + div |= 1; + continue; + } + + } while (counter > -1); + /* overflow */ + if (abs_h_dvd || (l_dvd > abs_s)) { + x86emu_intr_raise(0); + return; + } + /* sign */ + div |= ((h_dvd & 0x10000000) ^ (s & 0x10000000)); + mod = l_dvd; + +#endif + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_ZF); + set_parity_flag(mod); + + M.x86.R_EAX = (u32)div; + M.x86.R_EDX = (u32)mod; +} + +/**************************************************************************** +REMARKS: +Implements the DIV instruction and side effects. +****************************************************************************/ +void div_byte(u8 s) +{ + u32 dvd, div, mod; + + dvd = M.x86.R_AX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (u8)s; + mod = dvd % (u8)s; + if (abs(div) > 0xff) { + x86emu_intr_raise(0); + return; + } + M.x86.R_AL = (u8)div; + M.x86.R_AH = (u8)mod; +} + +/**************************************************************************** +REMARKS: +Implements the DIV instruction and side effects. +****************************************************************************/ +void div_word(u16 s) +{ + u32 dvd, div, mod; + + dvd = (((u32)M.x86.R_DX) << 16) | M.x86.R_AX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (u16)s; + mod = dvd % (u16)s; + if (abs(div) > 0xffff) { + x86emu_intr_raise(0); + return; + } + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_SF); + CONDITIONAL_SET_FLAG(div == 0, F_ZF); + set_parity_flag(mod); + + M.x86.R_AX = (u16)div; + M.x86.R_DX = (u16)mod; +} + +/**************************************************************************** +REMARKS: +Implements the DIV instruction and side effects. +****************************************************************************/ +void div_long(u32 s) +{ +#ifdef __HAS_LONG_LONG__ + u64 dvd, div, mod; + + dvd = (((u64)M.x86.R_EDX) << 32) | M.x86.R_EAX; + if (s == 0) { + x86emu_intr_raise(0); + return; + } + div = dvd / (u32)s; + mod = dvd % (u32)s; + if (abs(div) > 0xffffffff) { + x86emu_intr_raise(0); + return; + } +#else + s32 div = 0, mod; + s32 h_dvd = M.x86.R_EDX; + u32 l_dvd = M.x86.R_EAX; + + u32 h_s = s; + u32 l_s = 0; + int counter = 32; + int carry; + + if (s == 0) { + x86emu_intr_raise(0); + return; + } + do { + div <<= 1; + carry = (l_dvd >= l_s) ? 0 : 1; + + if (h_dvd < (h_s + carry)) { + h_s >>= 1; + l_s = s << (--counter); + continue; + } else { + h_dvd -= (h_s + carry); + l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1) + : (l_dvd - l_s); + h_s >>= 1; + l_s = s << (--counter); + div |= 1; + continue; + } + + } while (counter > -1); + /* overflow */ + if (h_dvd || (l_dvd > s)) { + x86emu_intr_raise(0); + return; + } + mod = l_dvd; +#endif + CLEAR_FLAG(F_CF); + CLEAR_FLAG(F_AF); + CLEAR_FLAG(F_SF); + SET_FLAG(F_ZF); + set_parity_flag(mod); + + M.x86.R_EAX = (u32)div; + M.x86.R_EDX = (u32)mod; +} + +/**************************************************************************** +REMARKS: +Implements the IN string instruction and side effects. +****************************************************************************/ + +static void single_in(int size) +{ + if(size == 1) + store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inb)(M.x86.R_DX)); + else if (size == 2) + store_data_word_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inw)(M.x86.R_DX)); + else + store_data_long_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inl)(M.x86.R_DX)); +} + +void ins(int size) +{ + int inc = size; + + if (ACCESS_FLAG(F_DF)) { + inc = -size; + } + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* in until CX is ZERO. */ + u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ? + M.x86.R_ECX : M.x86.R_CX); + + while (count--) { + single_in(size); + M.x86.R_DI += inc; + } + M.x86.R_CX = 0; + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_ECX = 0; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + single_in(size); + M.x86.R_DI += inc; + } +} + +/**************************************************************************** +REMARKS: +Implements the OUT string instruction and side effects. +****************************************************************************/ + +static void single_out(int size) +{ + if(size == 1) + (*sys_outb)(M.x86.R_DX,fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI)); + else if (size == 2) + (*sys_outw)(M.x86.R_DX,fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI)); + else + (*sys_outl)(M.x86.R_DX,fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI)); +} + +void outs(int size) +{ + int inc = size; + + if (ACCESS_FLAG(F_DF)) { + inc = -size; + } + if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) { + /* dont care whether REPE or REPNE */ + /* out until CX is ZERO. */ + u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ? + M.x86.R_ECX : M.x86.R_CX); + while (count--) { + single_out(size); + M.x86.R_SI += inc; + } + M.x86.R_CX = 0; + if (M.x86.mode & SYSMODE_PREFIX_DATA) { + M.x86.R_ECX = 0; + } + M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE); + } else { + single_out(size); + M.x86.R_SI += inc; + } +} + +/**************************************************************************** +PARAMETERS: +addr - Address to fetch word from + +REMARKS: +Fetches a word from emulator memory using an absolute address. +****************************************************************************/ +u16 mem_access_word(int addr) +{ +DB( if (CHECK_MEM_ACCESS()) + x86emu_check_mem_access(addr);) + return (*sys_rdw)(addr); +} + +/**************************************************************************** +REMARKS: +Pushes a word onto the stack. + +NOTE: Do not inline this, as (*sys_wrX) is already inline! +****************************************************************************/ +void push_word(u16 w) +{ +DB( if (CHECK_SP_ACCESS()) + x86emu_check_sp_access();) + M.x86.R_SP -= 2; + (*sys_wrw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w); +} + +/**************************************************************************** +REMARKS: +Pushes a long onto the stack. + +NOTE: Do not inline this, as (*sys_wrX) is already inline! +****************************************************************************/ +void push_long(u32 w) +{ +DB( if (CHECK_SP_ACCESS()) + x86emu_check_sp_access();) + M.x86.R_SP -= 4; + (*sys_wrl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w); +} + +/**************************************************************************** +REMARKS: +Pops a word from the stack. + +NOTE: Do not inline this, as (*sys_rdX) is already inline! +****************************************************************************/ +u16 pop_word(void) +{ + u16 res; + +DB( if (CHECK_SP_ACCESS()) + x86emu_check_sp_access();) + res = (*sys_rdw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP); + M.x86.R_SP += 2; + return res; +} + +/**************************************************************************** +REMARKS: +Pops a long from the stack. + +NOTE: Do not inline this, as (*sys_rdX) is already inline! +****************************************************************************/ +u32 pop_long(void) +{ + u32 res; + +DB( if (CHECK_SP_ACCESS()) + x86emu_check_sp_access();) + res = (*sys_rdl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP); + M.x86.R_SP += 4; + return res; +} + diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c new file mode 100644 index 0000000..bb7fcd9 --- /dev/null +++ b/drivers/bios_emulator/x86emu/sys.c @@ -0,0 +1,322 @@ +/**************************************************************************** +* +* Realmode X86 Emulator Library +* +* Copyright (C) 1991-2004 SciTech Software, Inc. +* Copyright (C) David Mosberger-Tang +* Copyright (C) 1999 Egbert Eich +* +* ======================================================================== +* +* Permission to use, copy, modify, distribute, and sell this software and +* its documentation for any purpose is hereby granted without fee, +* provided that the above copyright notice appear in all copies and that +* both that copyright notice and this permission notice appear in +* supporting documentation, and that the name of the authors not be used +* in advertising or publicity pertaining to distribution of the software +* without specific, written prior permission. The authors makes no +* representations about the suitability of this software for any purpose. +* It is provided "as is" without express or implied warranty. +* +* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR +* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +* PERFORMANCE OF THIS SOFTWARE. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* Developer: Kendall Bennett +* +* Description: This file includes subroutines which are related to +* programmed I/O and memory access. Included in this module +* are default functions that do nothing. For real uses these +* functions will have to be overriden by the user library. +* +****************************************************************************/ + +#include "x86emu/x86emui.h" + +/*------------------------- Global Variables ------------------------------*/ + +X86EMU_sysEnv _X86EMU_env; /* Global emulator machine state */ +X86EMU_intrFuncs _X86EMU_intrTab[256]; + +int debug_intr; + +/*----------------------------- Implementation ----------------------------*/ + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Byte value read from emulator memory. + +REMARKS: +Reads a byte value from the emulator memory. +****************************************************************************/ +u8 X86API rdb(u32 addr) +{ + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Word value read from emulator memory. + +REMARKS: +Reads a word value from the emulator memory. +****************************************************************************/ +u16 X86API rdw(u32 addr) +{ + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read + +RETURNS: +Long value read from emulator memory. +REMARKS: +Reads a long value from the emulator memory. +****************************************************************************/ +u32 X86API rdl(u32 addr) +{ + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a byte value to emulator memory. +****************************************************************************/ +void X86API wrb(u32 addr, u8 val) +{ +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a word value to emulator memory. +****************************************************************************/ +void X86API wrw(u32 addr, u16 val) +{ +} + +/**************************************************************************** +PARAMETERS: +addr - Emulator memory address to read +val - Value to store + +REMARKS: +Writes a long value to emulator memory. +****************************************************************************/ +void X86API wrl(u32 addr, u32 val) +{ +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to read +RETURN: +0 +REMARKS: +Default PIO byte read function. Doesn't perform real inb. +****************************************************************************/ +static u8 X86API p_inb(X86EMU_pioAddr addr) +{ + DB(if (DEBUG_IO_TRACE()) + printk("inb %#04x \n", addr);) + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to read +RETURN: +0 +REMARKS: +Default PIO word read function. Doesn't perform real inw. +****************************************************************************/ +static u16 X86API p_inw(X86EMU_pioAddr addr) +{ + DB(if (DEBUG_IO_TRACE()) + printk("inw %#04x \n", addr);) + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to read +RETURN: +0 +REMARKS: +Default PIO long read function. Doesn't perform real inl. +****************************************************************************/ +static u32 X86API p_inl(X86EMU_pioAddr addr) +{ + DB(if (DEBUG_IO_TRACE()) + printk("inl %#04x \n", addr);) + return 0; +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to write +val - Value to store +REMARKS: +Default PIO byte write function. Doesn't perform real outb. +****************************************************************************/ +static void X86API p_outb(X86EMU_pioAddr addr, u8 val) +{ + DB(if (DEBUG_IO_TRACE()) + printk("outb %#02x -> %#04x \n", val, addr);) + return; +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to write +val - Value to store +REMARKS: +Default PIO word write function. Doesn't perform real outw. +****************************************************************************/ +static void X86API p_outw(X86EMU_pioAddr addr, u16 val) +{ + DB(if (DEBUG_IO_TRACE()) + printk("outw %#04x -> %#04x \n", val, addr);) + return; +} + +/**************************************************************************** +PARAMETERS: +addr - PIO address to write +val - Value to store +REMARKS: +Default PIO ;ong write function. Doesn't perform real outl. +****************************************************************************/ +static void X86API p_outl(X86EMU_pioAddr addr, u32 val) +{ + DB(if (DEBUG_IO_TRACE()) + printk("outl %#08x -> %#04x \n", val, addr);) + return; +} + +/*------------------------- Global Variables ------------------------------*/ + +u8(X86APIP sys_rdb) (u32 addr) = rdb; +u16(X86APIP sys_rdw) (u32 addr) = rdw; +u32(X86APIP sys_rdl) (u32 addr) = rdl; +void (X86APIP sys_wrb) (u32 addr, u8 val) = wrb; +void (X86APIP sys_wrw) (u32 addr, u16 val) = wrw; +void (X86APIP sys_wrl) (u32 addr, u32 val) = wrl; +u8(X86APIP sys_inb) (X86EMU_pioAddr addr) = p_inb; +u16(X86APIP sys_inw) (X86EMU_pioAddr addr) = p_inw; +u32(X86APIP sys_inl) (X86EMU_pioAddr addr) = p_inl; +void (X86APIP sys_outb) (X86EMU_pioAddr addr, u8 val) = p_outb; +void (X86APIP sys_outw) (X86EMU_pioAddr addr, u16 val) = p_outw; +void (X86APIP sys_outl) (X86EMU_pioAddr addr, u32 val) = p_outl; + +/*----------------------------- Setup -------------------------------------*/ + +/**************************************************************************** +PARAMETERS: +funcs - New memory function pointers to make active + +REMARKS: +This function is used to set the pointers to functions which access +memory space, allowing the user application to override these functions +and hook them out as necessary for their application. +****************************************************************************/ +void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs) +{ + sys_rdb = funcs->rdb; + sys_rdw = funcs->rdw; + sys_rdl = funcs->rdl; + sys_wrb = funcs->wrb; + sys_wrw = funcs->wrw; + sys_wrl = funcs->wrl; +} + +/**************************************************************************** +PARAMETERS: +funcs - New programmed I/O function pointers to make active + +REMARKS: +This function is used to set the pointers to functions which access +I/O space, allowing the user application to override these functions +and hook them out as necessary for their application. +****************************************************************************/ +void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs) +{ + sys_inb = funcs->inb; + sys_inw = funcs->inw; + sys_inl = funcs->inl; + sys_outb = funcs->outb; + sys_outw = funcs->outw; + sys_outl = funcs->outl; +} + +/**************************************************************************** +PARAMETERS: +funcs - New interrupt vector table to make active + +REMARKS: +This function is used to set the pointers to functions which handle +interrupt processing in the emulator, allowing the user application to +hook interrupts as necessary for their application. Any interrupts that +are not hooked by the user application, and reflected and handled internally +in the emulator via the interrupt vector table. This allows the application +to get control when the code being emulated executes specific software +interrupts. +****************************************************************************/ +void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]) +{ + int i; + + for (i = 0; i < 256; i++) + _X86EMU_intrTab[i] = NULL; + if (funcs) { + for (i = 0; i < 256; i++) + _X86EMU_intrTab[i] = funcs[i]; + } +} + +/**************************************************************************** +PARAMETERS: +int - New software interrupt to prepare for + +REMARKS: +This function is used to set up the emulator state to exceute a software +interrupt. This can be used by the user application code to allow an +interrupt to be hooked, examined and then reflected back to the emulator +so that the code in the emulator will continue processing the software +interrupt as per normal. This essentially allows system code to actively +hook and handle certain software interrupts as necessary. +****************************************************************************/ +void X86EMU_prepareForInt(int num) +{ + push_word((u16) M.x86.R_FLG); + CLEAR_FLAG(F_IF); + CLEAR_FLAG(F_TF); + push_word(M.x86.R_CS); + M.x86.R_CS = mem_access_word(num * 4 + 2); + push_word(M.x86.R_IP); + M.x86.R_IP = mem_access_word(num * 4); + M.x86.intr = 0; +} |