diff options
Diffstat (limited to 'drivers/bios_emulator')
| -rw-r--r-- | drivers/bios_emulator/Makefile | 2 | ||||
| -rw-r--r-- | drivers/bios_emulator/atibios.c | 198 | ||||
| -rw-r--r-- | drivers/bios_emulator/besys.c | 100 | ||||
| -rw-r--r-- | drivers/bios_emulator/bios.c | 4 | ||||
| -rw-r--r-- | drivers/bios_emulator/biosemui.h | 2 | ||||
| -rw-r--r-- | drivers/bios_emulator/include/biosemu.h | 53 | ||||
| -rw-r--r-- | drivers/bios_emulator/include/x86emu.h | 7 | ||||
| -rw-r--r-- | drivers/bios_emulator/include/x86emu/debug.h | 20 | ||||
| -rw-r--r-- | drivers/bios_emulator/include/x86emu/regs.h | 2 | ||||
| -rw-r--r-- | drivers/bios_emulator/x86emu/debug.c | 10 | ||||
| -rw-r--r-- | drivers/bios_emulator/x86emu/decode.c | 24 | ||||
| -rw-r--r-- | drivers/bios_emulator/x86emu/ops.c | 58 | ||||
| -rw-r--r-- | drivers/bios_emulator/x86emu/ops2.c | 4 | ||||
| -rw-r--r-- | drivers/bios_emulator/x86emu/sys.c | 5 |
14 files changed, 286 insertions, 203 deletions
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index e56356e..2ba43ac 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -9,4 +9,4 @@ obj-y = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/debug.o ccflags-y := -I$(srctree)/$(src) -I$(srctree)/$(src)/include \ - -D__PPC__ -D__BIG_ENDIAN__ + $(if $(CONFIG_PPC),-D__PPC__ -D__BIG_ENDIAN__) diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index 3b2ed6e..93b815c 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -46,8 +46,11 @@ * BIOS in u-boot. ****************************************************************************/ #include <common.h> -#include "biosemui.h" +#include <bios_emul.h> +#include <errno.h> #include <malloc.h> +#include <vbe.h> +#include "biosemui.h" /* Length of the BIOS image */ #define MAX_BIOSLEN (128 * 1024L) @@ -59,17 +62,54 @@ static u32 saveBaseAddress14; static u32 saveBaseAddress18; static u32 saveBaseAddress20; +static void atibios_set_vesa_mode(RMREGS *regs, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + debug("VBE: Setting VESA mode %#04x\n", vesa_mode); + /* request linear framebuffer mode */ + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); + + int offset = 0x2000; + void *buffer = (void *)(M.mem_base + offset); + + u16 buffer_seg = (((unsigned long)offset) >> 4) & 0xff00; + u16 buffer_adr = ((unsigned long)offset) & 0xffff; + regs->e.eax = VESA_GET_MODE_INFO; + regs->e.ebx = 0; + regs->e.ecx = vesa_mode; + regs->e.edx = 0; + regs->e.esi = buffer_seg; + regs->e.edi = buffer_adr; + BE_int86(0x10, regs, regs); + memcpy(mode_info->mode_info_block, buffer, + sizeof(struct vbe_mode_info)); + mode_info->valid = true; + + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); +} + /**************************************************************************** PARAMETERS: pcidev - PCI device info for the video card on the bus to boot -VGAInfo - BIOS emulator VGA info structure +vga_info - BIOS emulator VGA info structure REMARKS: This function executes the BIOS POST code on the controller. We assume that at this stage the controller has its I/O and memory space enabled and that all other controllers are in a disabled state. ****************************************************************************/ -static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, + int vesa_mode, struct vbe_mode_info *mode_info) { RMREGS regs; RMSREGS sregs; @@ -84,13 +124,16 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); /*Setup the X86 emulator for the VGA BIOS*/ - BE_setVGA(VGAInfo); + BE_setVGA(vga_info); /*Execute the BIOS POST code*/ BE_callRealMode(0xC000, 0x0003, ®s, &sregs); /*Cleanup and exit*/ - BE_getVGA(VGAInfo); + BE_getVGA(vga_info); + + if (vesa_mode != -1) + atibios_set_vesa_mode(®s, vesa_mode, mode_info); } /**************************************************************************** @@ -244,60 +287,61 @@ REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS image we can extract over the PCI bus. ****************************************************************************/ -static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int vesa_mode, + struct vbe_mode_info *mode_info) { - u32 BIOSImageLen; - uchar *mappedBIOS; - uchar *copyOfBIOS; - - /*Allocate memory to store copy of BIOS from display controller*/ - if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) { - printf("videoboot: Video ROM failed to map!\n"); - return false; - } + u32 bios_image_len; + uchar *mapped_bios; + uchar *copy_of_bios; + + if (bios_rom) { + copy_of_bios = bios_rom; + bios_image_len = bios_len; + } else { + /* + * Allocate memory to store copy of BIOS from display + * controller + */ + mapped_bios = PCI_mapBIOSImage(pcidev); + if (mapped_bios == NULL) { + printf("videoboot: Video ROM failed to map!\n"); + return false; + } - BIOSImageLen = mappedBIOS[2] * 512; + bios_image_len = mapped_bios[2] * 512; - if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) { - printf("videoboot: Out of memory!\n"); - return false; + copy_of_bios = malloc(bios_image_len); + if (copy_of_bios == NULL) { + printf("videoboot: Out of memory!\n"); + return false; + } + memcpy(copy_of_bios, mapped_bios, bios_image_len); + PCI_unmapBIOSImage(pcidev, mapped_bios); } - memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen); - PCI_unmapBIOSImage(pcidev, mappedBIOS); - - /*Save information in VGAInfo structure*/ - VGAInfo->function = PCI_FUNC(pcidev); - VGAInfo->device = PCI_DEV(pcidev); - VGAInfo->bus = PCI_BUS(pcidev); - VGAInfo->pcidev = pcidev; - VGAInfo->BIOSImage = copyOfBIOS; - VGAInfo->BIOSImageLen = BIOSImageLen; + /*Save information in vga_info structure*/ + vga_info->function = PCI_FUNC(pcidev); + vga_info->device = PCI_DEV(pcidev); + vga_info->bus = PCI_BUS(pcidev); + vga_info->pcidev = pcidev; + vga_info->BIOSImage = copy_of_bios; + vga_info->BIOSImageLen = bios_image_len; /*Now execute the BIOS POST for the device*/ - if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) { + if (copy_of_bios[0] != 0x55 || copy_of_bios[1] != 0xAA) { printf("videoboot: Video ROM image is invalid!\n"); return false; } - PCI_doBIOSPOST(pcidev, VGAInfo); + PCI_doBIOSPOST(pcidev, vga_info, vesa_mode, mode_info); /*Reset the size of the BIOS image to the final size*/ - VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512; + vga_info->BIOSImageLen = copy_of_bios[2] * 512; return true; } -/**************************************************************************** -PARAMETERS: -pcidev - PCI device info for the video card on the bus to boot -pVGAInfo - Place to return VGA info structure is requested -cleanUp - true to clean up on exit, false to leave emulator active - -REMARKS: -Boots the PCI/AGP video card on the bus using the Video ROM BIOS image -and the X86 BIOS emulator module. -****************************************************************************/ -int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop) { BE_VGAInfo *VGAInfo; @@ -307,28 +351,70 @@ int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) /*Initialise the x86 BIOS emulator*/ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { printf("videoboot: Out of memory!\n"); - return false; + return -ENOMEM; } memset(VGAInfo, 0, sizeof(*VGAInfo)); BE_init(0, 65536, VGAInfo, 0); + *vga_infop = VGAInfo; - /*Post all the display controller BIOS'es*/ - if (!PCI_postController(pcidev, VGAInfo)) - return false; + return 0; +} - /*Cleanup and exit the emulator if requested. If the BIOS emulator - is needed after booting the card, we will not call BE_exit and - leave it enabled for further use (ie: VESA driver etc). +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)) +{ + X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func); +} + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + /*Post all the display controller BIOS'es*/ + if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info, + vesa_mode, mode_info)) + return -EINVAL; + + /* + * Cleanup and exit the emulator if requested. If the BIOS emulator + * is needed after booting the card, we will not call BE_exit and + * leave it enabled for further use (ie: VESA driver etc). */ - if (cleanUp) { + if (clean_up) { BE_exit(); - if (VGAInfo->BIOSImage) - free(VGAInfo->BIOSImage); - free(VGAInfo); - VGAInfo = NULL; + if (vga_info->BIOSImage) + free(vga_info->BIOSImage); + free(vga_info); + vga_info = NULL; } - /*Return VGA info pointer if the caller requested it*/ + + return 0; +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +pVGAInfo - Place to return VGA info structure is requested +cleanUp - true to clean up on exit, false to leave emulator active + +REMARKS: +Boots the PCI/AGP video card on the bus using the Video ROM BIOS image +and the X86 BIOS emulator module. +****************************************************************************/ +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up) +{ + BE_VGAInfo *VGAInfo; + int ret; + + ret = biosemu_setup(pcidev, &VGAInfo); + if (ret) + return false; + ret = biosemu_run(pcidev, NULL, 0, VGAInfo, clean_up, -1, NULL); + if (ret) + return false; + + /* Return VGA info pointer if the caller requested it*/ if (pVGAInfo) *pVGAInfo = VGAInfo; + return true; } diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index ad88a53..752a928 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -54,12 +54,20 @@ /*------------------------- Global Variables ------------------------------*/ -#ifndef __i386__ +#ifndef CONFIG_X86EMU_RAW_IO static char *BE_biosDate = "08/14/99"; static u8 BE_model = 0xFC; static u8 BE_submodel = 0x00; #endif +#undef DEBUG_IO_ACCESS + +#ifdef DEBUG_IO_ACCESS +#define debug_io(fmt, ...) printf(fmt, ##__VA_ARGS__) +#else +#define debug_io(x, b...) +#endif + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** @@ -80,38 +88,40 @@ static u8 *BE_memaddr(u32 addr) if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) { return (u8*)(_BE_env.biosmem_base + addr - 0xC0000); } else if (addr > _BE_env.biosmem_limit && addr < 0xD0000) { - DB(printf("BE_memaddr: address %#lx may be invalid!\n", addr);) - return M.mem_base; + DB(printf("BE_memaddr: address %#lx may be invalid!\n", + (ulong)addr);) + return (u8 *)M.mem_base; } else if (addr >= 0xA0000 && addr <= 0xBFFFF) { return (u8*)(_BE_env.busmem_base + addr - 0xA0000); } -#ifdef __i386__ +#ifdef CONFIG_X86EMU_RAW_IO else if (addr >= 0xD0000 && addr <= 0xFFFFF) { /* We map the real System BIOS directly on real PC's */ - DB(printf("BE_memaddr: System BIOS address %#lx\n", addr);) - return _BE_env.busmem_base + addr - 0xA0000; + DB(printf("BE_memaddr: System BIOS address %#lx\n", + (ulong)addr);) + return (u8 *)_BE_env.busmem_base + addr - 0xA0000; } #else else if (addr >= 0xFFFF5 && addr < 0xFFFFE) { /* Return a faked BIOS date string for non-x86 machines */ - DB(printf("BE_memaddr - Returning BIOS date\n");) + debug_io("BE_memaddr - Returning BIOS date\n"); return (u8 *)(BE_biosDate + addr - 0xFFFF5); } else if (addr == 0xFFFFE) { /* Return system model identifier for non-x86 machines */ - DB(printf("BE_memaddr - Returning model\n");) + debug_io("BE_memaddr - Returning model\n"); return &BE_model; } else if (addr == 0xFFFFF) { /* Return system submodel identifier for non-x86 machines */ - DB(printf("BE_memaddr - Returning submodel\n");) + debug_io("BE_memaddr - Returning submodel\n"); return &BE_submodel; } #endif else if (addr > M.mem_size - 1) { HALT_SYS(); - return M.mem_base; + return (u8 *)M.mem_base; } - return M.mem_base + addr; + return (u8 *)(M.mem_base + addr); } /**************************************************************************** @@ -230,7 +240,7 @@ void X86API BE_wrl(u32 addr, u32 val) } } -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) /* For Non-Intel machines we may need to emulate some I/O port accesses that * the BIOS may try to access, such as the PCI config registers. @@ -258,6 +268,7 @@ static u8 VGA_inpb (const int port) { u8 val = 0xff; + debug_io("vga_inb.%04X -> ", (u16) port); switch (port) { case 0x3C0: /* 3C0 has funky characteristics because it can act as either @@ -560,7 +571,7 @@ u8 X86API BE_inb(X86EMU_pioAddr port) { u8 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_VGA_PORT(port)){ /*seems reading port 0x3c3 return the high 16 bit of io port*/ if(port == 0x3c3) @@ -581,7 +592,12 @@ u8 X86API BE_inb(X86EMU_pioAddr port) val = LOG_inpb(port); } else #endif + { + debug_io("inb.%04X -> ", (u16) port); val = LOG_inpb(port); + debug_io("%02X\n", val); + } + return val; } @@ -601,7 +617,7 @@ u16 X86API BE_inw(X86EMU_pioAddr port) { u16 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_PCI_PORT(port)) val = PCI_inp(port, REG_READ_WORD); else if (port < 0x100) { @@ -609,7 +625,12 @@ u16 X86API BE_inw(X86EMU_pioAddr port) val = LOG_inpw(port); } else #endif + { + debug_io("inw.%04X -> ", (u16) port); val = LOG_inpw(port); + debug_io("%04X\n", val); + } + return val; } @@ -629,14 +650,19 @@ u32 X86API BE_inl(X86EMU_pioAddr port) { u32 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_PCI_PORT(port)) val = PCI_inp(port, REG_READ_DWORD); else if (port < 0x100) { val = LOG_inpd(port); } else #endif + { + debug_io("inl.%04X -> ", (u16) port); val = LOG_inpd(port); + debug_io("%08X\n", val); + } + return val; } @@ -652,7 +678,7 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outb(X86EMU_pioAddr port, u8 val) { -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_VGA_PORT(port)) VGA_outpb(port, val); else if (IS_TIMER_PORT(port)) @@ -668,7 +694,11 @@ void X86API BE_outb(X86EMU_pioAddr port, u8 val) LOG_outpb(port, val); } else #endif + { + debug_io("outb.%04X <- %02X", (u16) port, val); LOG_outpb(port, val); + debug_io("\n"); + } } /**************************************************************************** @@ -683,19 +713,23 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outw(X86EMU_pioAddr port, u16 val) { -#if defined(DEBUG) || !defined(__i386__) - if (IS_VGA_PORT(port)) { - VGA_outpb(port, val); - VGA_outpb(port + 1, val >> 8); - } else if (IS_PCI_PORT(port)) - PCI_outp(port, val, REG_WRITE_WORD); - else if (port < 0x100) { - DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16) port, - val);) - LOG_outpw(port, val); - } else +#if !defined(CONFIG_X86EMU_RAW_IO) + if (IS_VGA_PORT(port)) { + VGA_outpb(port, val); + VGA_outpb(port + 1, val >> 8); + } else if (IS_PCI_PORT(port)) { + PCI_outp(port, val, REG_WRITE_WORD); + } else if (port < 0x100) { + DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16)port, + val);) + LOG_outpw(port, val); + } else #endif - LOG_outpw(port, val); + { + debug_io("outw.%04X <- %04X", (u16) port, val); + LOG_outpw(port, val); + debug_io("\n"); + } } /**************************************************************************** @@ -710,13 +744,17 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outl(X86EMU_pioAddr port, u32 val) { -#if defined(DEBUG) || !defined(__i386__) - if (IS_PCI_PORT(port)) +#if !defined(CONFIG_X86EMU_RAW_IO) + if (IS_PCI_PORT(port)) { PCI_outp(port, val, REG_WRITE_DWORD); - else if (port < 0x100) { + } else if (port < 0x100) { DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);) LOG_outpd(port, val); } else #endif + { + debug_io("outl.%04X <- %08X", (u16) port, val); LOG_outpd(port, val); + debug_io("\n"); + } } diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index bcc192f..152d70a 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -84,14 +84,14 @@ static void X86API int42(int intno) PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8) ~ 0x02); return; } -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG else { printf("int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n", M.x86.R_AL); } #endif } -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG else { printf("int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n", M.x86.R_AH, M.x86.R_AL, M.x86.R_BL); diff --git a/drivers/bios_emulator/biosemui.h b/drivers/bios_emulator/biosemui.h index 8c1f111..7853015 100644 --- a/drivers/bios_emulator/biosemui.h +++ b/drivers/bios_emulator/biosemui.h @@ -48,7 +48,7 @@ #include <asm/io.h> /*---------------------- Macros and type definitions ----------------------*/ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define DB(x) x #else #define DB(x) do{}while(0); diff --git a/drivers/bios_emulator/include/biosemu.h b/drivers/bios_emulator/include/biosemu.h index e92e96e..124d79d 100644 --- a/drivers/bios_emulator/include/biosemu.h +++ b/drivers/bios_emulator/include/biosemu.h @@ -43,6 +43,8 @@ #ifndef __BIOSEMU_H #define __BIOSEMU_H +#include <bios_emul.h> + #ifdef __KERNEL__ #include "x86emu.h" #else @@ -55,57 +57,6 @@ #pragma pack(1) -#ifndef __KERNEL__ -/**************************************************************************** -REMARKS: -Data structure used to describe the details specific to a particular VGA -controller. This information is used to allow the VGA controller to be -swapped on the fly within the BIOS emulator. - -HEADER: -biosemu.h - -MEMBERS: -pciInfo - PCI device information block for the controller -BIOSImage - Pointer to a read/write copy of the BIOS image -BIOSImageLen - Length of the BIOS image -LowMem - Copy of key low memory areas -****************************************************************************/ -typedef struct { - PCIDeviceInfo *pciInfo; - void *BIOSImage; - ulong BIOSImageLen; - uchar LowMem[1536]; -} BE_VGAInfo; -#else -/**************************************************************************** -REMARKS: -Data structure used to describe the details for the BIOS emulator system -environment as used by the X86 emulator library. - -HEADER: -biosemu.h - -MEMBERS: -vgaInfo - VGA BIOS information structure -biosmem_base - Base of the BIOS image -biosmem_limit - Limit of the BIOS image -busmem_base - Base of the VGA bus memory -****************************************************************************/ -typedef struct { - int function; - int device; - int bus; - u32 VendorID; - u32 DeviceID; - pci_dev_t pcidev; - void *BIOSImage; - u32 BIOSImageLen; - u8 LowMem[1536]; -} BE_VGAInfo; - -#endif /* __KERNEL__ */ - #define CRT_C 24 /* 24 CRT Controller Registers */ #define ATT_C 21 /* 21 Attribute Controller Registers */ #define GRA_C 9 /* 9 Graphics Controller Registers */ diff --git a/drivers/bios_emulator/include/x86emu.h b/drivers/bios_emulator/include/x86emu.h index a70a768..b28cdc6 100644 --- a/drivers/bios_emulator/include/x86emu.h +++ b/drivers/bios_emulator/include/x86emu.h @@ -53,9 +53,9 @@ typedef u16 X86EMU_pioAddr; /*---------------------- Macros and type definitions ----------------------*/ -#if defined (CONFIG_ARM) +#if defined(CONFIG_ARM) #define GAS_LINE_COMMENT "@" -#elif defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#elif defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_X86) #define GAS_LINE_COMMENT "#" #elif defined (CONFIG_SH) #define GAS_LINE_COMMENT "!" @@ -153,6 +153,7 @@ extern "C" { /* Use "C" linkage when in C++ mode */ void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs); void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs); void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]); + void X86EMU_setupIntrFunc(int intnum, X86EMU_intrFuncs func); void X86EMU_prepareForInt(int num); /* decode.c */ @@ -160,7 +161,7 @@ extern "C" { /* Use "C" linkage when in C++ mode */ void X86EMU_exec(void); void X86EMU_halt_sys(void); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define HALT_SYS() \ printf("halt_sys: file %s, line %d\n", __FILE__, __LINE__), \ X86EMU_halt_sys() diff --git a/drivers/bios_emulator/include/x86emu/debug.h b/drivers/bios_emulator/include/x86emu/debug.h index 268c9d3..304b2bf 100644 --- a/drivers/bios_emulator/include/x86emu/debug.h +++ b/drivers/bios_emulator/include/x86emu/debug.h @@ -48,7 +48,7 @@ #define CHECK_MEM_ACCESS_F 0x4 /*using regular linear pointer */ #define CHECK_DATA_ACCESS_F 0x8 /*using segment:offset */ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define CHECK_IP_FETCH() (M.x86.check & CHECK_IP_FETCH_F) # define CHECK_SP_ACCESS() (M.x86.check & CHECK_SP_ACCESS_F) # define CHECK_MEM_ACCESS() (M.x86.check & CHECK_MEM_ACCESS_F) @@ -60,7 +60,7 @@ # define CHECK_DATA_ACCESS() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define DEBUG_INSTRUMENT() (M.x86.debug & DEBUG_INSTRUMENT_F) # define DEBUG_DECODE() (M.x86.debug & DEBUG_DECODE_F) # define DEBUG_TRACE() (M.x86.debug & DEBUG_TRACE_F) @@ -99,7 +99,11 @@ # define DEBUG_DECODE_NOPRINT() 0 #endif -#ifdef DEBUG +# define ERR_PRINTF(x) printf(x) +# define ERR_PRINTF2(x, y) printf(x, y) + +#ifdef CONFIG_X86EMU_DEBUG103 + # define DECODE_PRINTF(x) if (DEBUG_DECODE()) \ x86emu_decode_printf(x) @@ -129,7 +133,7 @@ # define SAVE_IP_CS(x,y) #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define TRACE_REGS() \ if (DEBUG_DISASSEMBLE()) { \ x86emu_just_disassemble(); \ @@ -140,7 +144,7 @@ # define TRACE_REGS() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define SINGLE_STEP() if (DEBUG_STEP()) x86emu_single_step() #else # define SINGLE_STEP() @@ -150,7 +154,7 @@ TRACE_REGS(); \ SINGLE_STEP() -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define START_OF_INSTR() # define END_OF_INSTR() EndOfTheInstructionProcedure: x86emu_end_instr(); # define END_OF_INSTR_NO_TRACE() x86emu_end_instr(); @@ -160,7 +164,7 @@ # define END_OF_INSTR_NO_TRACE() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define CALL_TRACE(u,v,w,x,s) \ if (DEBUG_TRACECALLREGS()) \ x86emu_dump_regs(); \ @@ -176,7 +180,7 @@ # define RETURN_TRACE(n,u,v) #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define DB(x) x #else #define DB(x) diff --git a/drivers/bios_emulator/include/x86emu/regs.h b/drivers/bios_emulator/include/x86emu/regs.h index a7fedd2..2934129 100644 --- a/drivers/bios_emulator/include/x86emu/regs.h +++ b/drivers/bios_emulator/include/x86emu/regs.h @@ -282,7 +282,7 @@ typedef struct { u8 intno; volatile int intr; /* mask of pending interrupts */ int debug; -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG int check; u16 saved_ip; u16 saved_cs; diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c index 2fa8050..27e90e4 100644 --- a/drivers/bios_emulator/x86emu/debug.c +++ b/drivers/bios_emulator/x86emu/debug.c @@ -44,7 +44,7 @@ /*----------------------------- Implementation ----------------------------*/ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static void print_encoded_bytes(u16 s, u16 o); static void print_decoded_instruction(void); @@ -211,9 +211,7 @@ void X86EMU_dump_memory(u16 seg, u16 off, u32 amt) u32 start = off & 0xfffffff0; u32 end = (off + 16) & 0xfffffff0; u32 i; - u32 current; - current = start; while (end <= off + amt) { printk("%04x:%04x ", seg, start); for (i = start; i < off; i++) @@ -229,7 +227,7 @@ void X86EMU_dump_memory(u16 seg, u16 off, u32 amt) void x86emu_single_step(void) { char s[1024]; - int ps[10]; + int ps[10]; int ntok; int cmd; int done; @@ -238,8 +236,6 @@ void x86emu_single_step(void) static int breakpoint; static int noDecode = 1; - char *p; - if (DEBUG_BREAK()) { if (M.x86.saved_ip != breakpoint) { return; @@ -255,6 +251,8 @@ void x86emu_single_step(void) offset = M.x86.saved_ip; while (!done) { printk("-"); + ps[1] = 0; /* Avoid dodgy compiler warnings */ + ps[2] = 0; cmd = x86emu_parse_line(s, ps, &ntok); switch (cmd) { case 'u': diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c index a782b81..da44c3d 100644 --- a/drivers/bios_emulator/x86emu/decode.c +++ b/drivers/bios_emulator/x86emu/decode.c @@ -303,7 +303,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u8 fetch_data_byte( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -322,7 +322,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u16 fetch_data_word( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -341,7 +341,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u32 fetch_data_long( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -362,7 +362,7 @@ u8 fetch_data_byte_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -383,7 +383,7 @@ u16 fetch_data_word_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -404,7 +404,7 @@ u32 fetch_data_long_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -426,7 +426,7 @@ void store_data_byte( uint offset, u8 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -448,7 +448,7 @@ void store_data_word( uint offset, u16 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -470,7 +470,7 @@ void store_data_long( uint offset, u32 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -493,7 +493,7 @@ void store_data_byte_abs( uint offset, u8 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -516,7 +516,7 @@ void store_data_word_abs( uint offset, u16 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -539,7 +539,7 @@ void store_data_long_abs( uint offset, u32 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c index f8e093d..2bb5e2d 100644 --- a/drivers/bios_emulator/x86emu/ops.c +++ b/drivers/bios_emulator/x86emu/ops.c @@ -79,7 +79,7 @@ /* constant arrays to do several instructions in just one function */ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static char *x86emu_GenOpName[8] = { "ADD", "OR", "ADC", "SBB", "AND", "SUB", "XOR", "CMP"}; #endif @@ -160,7 +160,7 @@ static u32 (*opcD1_long_operation[])(u32 s, u8 d) = sar_long, }; -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static char *opF6_names[8] = { "TEST\t", "", "NOT\t", "NEG\t", "MUL\t", "IMUL\t", "DIV\t", "IDIV\t" }; @@ -179,7 +179,7 @@ void x86emuOp_illegal_op( { START_OF_INSTR(); if (M.x86.R_SP != 0) { - DECODE_PRINTF("ILLEGAL X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL X86 OPCODE\n"); TRACE_REGS(); DB( printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n", M.x86.R_CS, M.x86.R_IP-1,op1)); @@ -1281,7 +1281,7 @@ void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1359,7 +1359,7 @@ void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1475,7 +1475,7 @@ void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1551,7 +1551,7 @@ void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -2148,7 +2148,7 @@ void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("POP\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); HALT_SYS(); } if (mod < 3) { @@ -3083,7 +3083,7 @@ void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3158,7 +3158,7 @@ void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3347,7 +3347,7 @@ void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("MOV\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE c6\n"); HALT_SYS(); } if (mod < 3) { @@ -3381,7 +3381,7 @@ void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("MOV\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); HALT_SYS(); } if (mod < 3) { @@ -3630,7 +3630,7 @@ void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3701,7 +3701,7 @@ void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3803,7 +3803,7 @@ void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3876,7 +3876,7 @@ void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3968,7 +3968,7 @@ void x86emuOp_aam(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("AAM\n"); a = fetch_byte_imm(); /* this is a stupid encoding. */ if (a != 10) { - DECODE_PRINTF("ERROR DECODING AAM\n"); + ERR_PRINTF("ERROR DECODING AAM\n"); TRACE_REGS(); HALT_SYS(); } @@ -4443,7 +4443,7 @@ void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1)) test_byte(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4490,7 +4490,7 @@ void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1)) test_byte(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4559,7 +4559,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_long(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); HALT_SYS(); break; case 2: @@ -4611,7 +4611,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_word(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); HALT_SYS(); break; case 2: @@ -4666,7 +4666,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_long(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4715,7 +4715,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_word(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4859,7 +4859,7 @@ void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1)) /* Yet another special case instruction. */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -4879,7 +4879,7 @@ void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1)) case 5: case 6: case 7: - DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod); + ERR_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x\n", mod); HALT_SYS(); break; } @@ -4923,7 +4923,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) /* Yet another special case instruction. */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -4961,7 +4961,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("PUSH\t"); break; case 7: - DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t"); + ERR_PRINTF("ILLEGAL DECODING OF OPCODE FF\t"); HALT_SYS(); break; } @@ -5092,7 +5092,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) M.x86.R_IP = *destreg; break; case 3: /* jmp far ptr ... */ - DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + ERR_PRINTF("OPERATION UNDEFINED 0XFF\n"); TRACE_AND_STEP(); HALT_SYS(); break; @@ -5104,7 +5104,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) M.x86.R_IP = (u16) (*destreg); break; case 5: /* jmp far ptr ... */ - DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + ERR_PRINTF("OPERATION UNDEFINED 0XFF\n"); TRACE_AND_STEP(); HALT_SYS(); break; diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c index 59dbb42..be4ef36 100644 --- a/drivers/bios_emulator/x86emu/ops2.c +++ b/drivers/bios_emulator/x86emu/ops2.c @@ -58,7 +58,7 @@ void x86emuOp2_illegal_op( u8 op2) { START_OF_INSTR(); - DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); TRACE_REGS(); printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n", M.x86.R_CS, M.x86.R_IP-2,op2); @@ -1089,7 +1089,7 @@ void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2)) DECODE_PRINTF("BTC\t"); break; default: - DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); TRACE_REGS(); printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n", M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl); diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c index 21f9730..0ba9c0c 100644 --- a/drivers/bios_emulator/x86emu/sys.c +++ b/drivers/bios_emulator/x86emu/sys.c @@ -273,6 +273,11 @@ void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs) sys_outl = funcs->outl; } +void X86EMU_setupIntrFunc(int intnum, X86EMU_intrFuncs func) +{ + _X86EMU_intrTab[intnum] = func; +} + /**************************************************************************** PARAMETERS: funcs - New interrupt vector table to make active |