diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.sh7752evb | 67 | ||||
-rw-r--r-- | doc/README.usb | 2 |
2 files changed, 68 insertions, 1 deletions
diff --git a/doc/README.sh7752evb b/doc/README.sh7752evb new file mode 100644 index 0000000..c1fb54c --- /dev/null +++ b/doc/README.sh7752evb @@ -0,0 +1,67 @@ +======================================== +Renesas R0P7752C00000RZ board +======================================== + +This board specification: +========================= + +The R0P7752C00000RZ(board config name:sh7752evb) has the following device: + + - SH7752 (SH-4A) + - DDR3-SDRAM 512MB + - SPI ROM 8MB + - Gigabit Ethernet controllers + - eMMC 4GB + + +Configuration for This board: +============================= + +You can select the configuration as follows: + + - make sh7752evb_config + + +This board specific command: +============================ + +This board has the following its specific command: + + - write_mac + + +1. write_mac + +You can write MAC address to SPI ROM. + + Usage 1) Write MAC address + + write_mac [GETHERC ch0] [GETHERC ch1] + + For example) + => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f + *) We have to input the command as a single line + (without carriage return) + *) We have to reset after input the command. + + Usage 2) Show current data + + write_mac + + For example) + => write_mac + GETHERC ch0 = 74:90:50:00:33:9e + GETHERC ch1 = 74:90:50:00:33:9f + + +Update SPI ROM: +============================ + +1. Copy u-boot image to RAM area. +2. Probe SPI device. + => sf probe 0 + SF: Detected MX25L6405D with page size 64KiB, total 8 MiB +3. Erase SPI ROM. + => sf erase 0 80000 +4. Write u-boot image to SPI ROM. + => sf write 0x48000000 0 80000 diff --git a/doc/README.usb b/doc/README.usb index ef1d6ba..b4c3ef5 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -63,7 +63,7 @@ Common USB Commands: Storage USB Commands: - usb scan: scans the USB for storage devices.The USB must be running for this command (usb start) -- usb device [dev]: show or set current USB staorage device +- usb device [dev]: show or set current USB storage device - usb part [dev]: print partition table of one or all USB storage devices - usb read addr blk# cnt: |