diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.uniphier | 20 |
1 files changed, 18 insertions, 2 deletions
diff --git a/doc/README.uniphier b/doc/README.uniphier index bcf0ac3..6c3b092 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -45,8 +45,8 @@ PH1-Pro4 reference board: $ make CROSS_COMPILE=arm-linux-gnueabi- PH1-Pro5 4KBOX Board: - $ make uniphier_pro5_defconfig - $ make CROSS_COMPILE=arm-linux-gnueabi- + $ make uniphier_pxs2_ld6b_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro5-4kbox ProXstream2 Gentil board: $ make uniphier_pxs2_ld6b_defconfig @@ -78,6 +78,20 @@ directory, and then run the following command at the U-Boot command line: => run nandupdate +Burn U-Boot images to eMMC +-------------------------- + +Write two files to the Boot partition 1 of the eMMC device as follows: + - spl/u-boot-spl.bin at the offset address 0x00000000 + - u-boot.img at the offset address 0x00010000 + +If a TFTP server is available, the images can be easily updated. +Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public +directory, and then run the following command at the U-Boot command line: + + => run emmcupdate + + UniPhier specific commands -------------------------- @@ -93,8 +107,10 @@ Supported devices - UART (on-chip) - NAND + - SD/eMMC - USB 2.0 (EHCI) - USB 3.0 (xHCI) + - GPIO - LAN (on-board SMSC9118) - I2C - EEPROM (connected to the on-board I2C bus) |