summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.nand62
1 files changed, 62 insertions, 0 deletions
diff --git a/doc/README.nand b/doc/README.nand
index 023740e..04a87c9 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -120,6 +120,68 @@ Configuration Options:
CONFIG_SYS_NAND_MAX_CHIPS
The maximum number of NAND chips per device to be supported.
+ CONFIG_SYS_NAND_SELF_INIT
+ Traditionally, glue code in drivers/mtd/nand/nand.c has driven
+ the initialization process -- it provides the mtd and nand
+ structs, calls a board init function for a specific device,
+ calls nand_scan(), and registers with mtd.
+
+ This arrangement does not provide drivers with the flexibility to
+ run code between nand_scan_ident() and nand_scan_tail(), or other
+ deviations from the "normal" flow.
+
+ If a board defines CONFIG_SYS_NAND_SELF_INIT, drivers/mtd/nand/nand.c
+ will make one call to board_nand_init(), with no arguments. That
+ function is responsible for calling a driver init function for
+ each NAND device on the board, that performs all initialization
+ tasks except setting mtd->name, and registering with the rest of
+ U-Boot. Those last tasks are accomplished by calling nand_register()
+ on the new mtd device.
+
+ Example of new init to be added to the end of an existing driver
+ init:
+
+ /*
+ * devnum is the device number to be used in nand commands
+ * and in mtd->name. Must be less than
+ * CONFIG_SYS_NAND_MAX_DEVICE.
+ */
+ mtd = &nand_info[devnum];
+
+ /* chip is struct nand_chip, and is now provided by the driver. */
+ mtd->priv = &chip;
+
+ /*
+ * Fill in appropriate values if this driver uses these fields,
+ * or uses the standard read_byte/write_buf/etc. functions from
+ * nand_base.c that use these fields.
+ */
+ chip.IO_ADDR_R = ...;
+ chip.IO_ADDR_W = ...;
+
+ if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_CHIPS, NULL))
+ error out
+
+ /*
+ * Insert here any code you wish to run after the chip has been
+ * identified, but before any other I/O is done.
+ */
+
+ if (nand_scan_tail(mtd))
+ error out
+
+ if (nand_register(devnum))
+ error out
+
+ In addition to providing more flexibility to the driver, it reduces
+ the difference between a U-Boot driver and its Linux counterpart.
+ nand_init() is now reduced to calling board_nand_init() once, and
+ printing a size summary. This should also make it easier to
+ transition to delayed NAND initialization.
+
+ Please convert your driver even if you don't need the extra
+ flexibility, so that one day we can eliminate the old mechanism.
+
NOTE:
=====