summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README-i3868
-rw-r--r--doc/README-integrator4
-rw-r--r--doc/README.RPXlite6
-rw-r--r--doc/README.adnpesc12
-rw-r--r--doc/README.adnpesc1_base324
-rw-r--r--doc/README.console6
-rw-r--r--doc/README.m54455evb4
-rw-r--r--doc/README.m68k10
-rw-r--r--doc/README.marubun-pcmcia8
-rw-r--r--doc/README.mpc8313erdb2
-rw-r--r--doc/README.mpc8349itx6
-rw-r--r--doc/README.mpc8360emds2
-rw-r--r--doc/README.mpc837xemds2
-rw-r--r--doc/README.mpc8641hpcn2
-rw-r--r--doc/README.video2
15 files changed, 34 insertions, 34 deletions
diff --git a/doc/README-i386 b/doc/README-i386
index 02b753c..c560d22 100644
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -57,9 +57,9 @@ Daniel Engström, Omicron Ceti AB, daniel@omicron.se
--- linux-2.4.19-orig/init/do_mounts.c Sat Aug 3 02:39:46 2002
+++ linux-2.4.19/init/do_mounts.c Mon Sep 23 16:21:33 2002
@@ -224,6 +224,14 @@
- { "ftlc", 0x2c10 },
- { "ftld", 0x2c18 },
- { "mtdblock", 0x1f00 },
+ { "ftlc", 0x2c10 },
+ { "ftld", 0x2c18 },
+ { "mtdblock", 0x1f00 },
+ { "mtdblock0", 0x1f00 },
+ { "mtdblock1", 0x1f01 },
+ { "mtdblock2", 0x1f02 },
@@ -68,7 +68,7 @@ Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ { "mtdblock5", 0x1f05 },
+ { "mtdblock6", 0x1f06 },
+ { "mtdblock7", 0x1f07 },
- { NULL, 0 }
+ { NULL, 0 }
};
-------------------
diff --git a/doc/README-integrator b/doc/README-integrator
index ce8a9d2..4daf341 100644
--- a/doc/README-integrator
+++ b/doc/README-integrator
@@ -86,12 +86,12 @@ using the generic "arm_intcm" core:
ap966_config Integrator Core Module for ARM966E-S TM
ap922_config Integrator Core Module for ARM922T TM with ETM
ap922_XA10_config Integrator Core Module for ARM922T using Altera Excalibur
-ap7_config ** CM7TDMI
+ap7_config ** CM7TDMI
integratorap_config
ap_config
-cp966_config Integrator Core Module for ARM966E-S TM
+cp966_config Integrator Core Module for ARM966E-S TM
cp922_config Integrator Core Module for ARM922T TM with ETM
cp922_XA10_config Integrator Core Module for ARM922T using Altera Excalibur
cp1026_config Integrator Core Module ARM1026EJ-S TM
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
index c8ccc41..c0238ae 100644
--- a/doc/README.RPXlite
+++ b/doc/README.RPXlite
@@ -451,7 +451,7 @@ reg_config.txt:
PS = 00
PARE = 0
WP = 0
- MS = 1 /* UPMA */
+ MS = 1 /* UPMA */
V = 1 /* Valid */
=> 0x0000 0081
@@ -486,7 +486,7 @@ reg_config.txt:
PS = 00
PARE = 0
WP = 0
- MS = 0 /* GPCM */
+ MS = 0 /* GPCM */
V = 1 /* Valid */
=> 0xFA40 0001
@@ -513,7 +513,7 @@ reg_config.txt:
PS = 01
PARE = 0
WP = 0
- MS = 0 /* GPCM */
+ MS = 0 /* GPCM */
V = 1 /* Valid */
=> 0xFA00 0401
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
index ded5321..5257f18 100644
--- a/doc/README.adnpesc1
+++ b/doc/README.adnpesc1
@@ -184,7 +184,7 @@ you have to check-up the next environment variables:
- default is '0' (zero)
NOTE: You should avoid to save this variable with non zero
- value to Flash. Otherwise it would be allow any
+ value to Flash. Otherwise it would be allow any
update process at any time!
2. appl_entry_addr
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
index 6576044..145e8cd 100644
--- a/doc/README.adnpesc1_base32
+++ b/doc/README.adnpesc1_base32
@@ -192,7 +192,7 @@ IDE: (TODO)
: gap :
| |
0x00010020 ---32-----------16|15------------0-
- | | \
+ | | \
| register bank | |
| size = (real_size << 1) | |
| real_size = 0x10 | |
@@ -308,7 +308,7 @@ IDE: (TODO)
+ 0x18 |- - - - - - - - - - - - - - - -| |
| slaveselect (1 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
- SPI0 | (reserved) | |
+ SPI0 | (reserved) | |
[4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| control (11 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
diff --git a/doc/README.console b/doc/README.console
index 6d477df..25c4f1d 100644
--- a/doc/README.console
+++ b/doc/README.console
@@ -97,8 +97,8 @@ SUPPORTED DRIVERS
Working drivers:
- serial (architecture dependent serial stuff)
- video (mpc8xx video controller)
+ serial (architecture dependent serial stuff)
+ video (mpc8xx video controller)
Work in progress:
@@ -114,5 +114,5 @@ TESTED CONFIGURATIONS
The driver has been tested with the following configurations (see
CREDITS for other contact informations):
-- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
+- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
- GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it
diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index 119a19d..5c01f0d 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -83,7 +83,7 @@ CONFIG_CMD_DATE -- enable to use date feature in u-boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
CONFIG_MII -- enable to use MII driver
-CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
+CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
CFG_DISCOVER_PHY -- enable PHY discovery
CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
CFG_FAULT_ECHO_LINK_DOWN--
@@ -107,7 +107,7 @@ CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset
CFG_ATA_DATA_OFFSET -- define ATA data IO
CFG_ATA_REG_OFFSET -- define for normal register accesses
CFG_ATA_ALT_OFFSET -- define for alternate registers
-CFG_ATA_STRIDE -- define for Interval between registers
+CFG_ATA_STRIDE -- define for Interval between registers
_IO_BASE -- define for IO base address
CONFIG_MCFTMR -- define to use DMA timer
diff --git a/doc/README.m68k b/doc/README.m68k
index 6dea2b5..0c533f3 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -4,9 +4,9 @@ U-Boot for Motorola M68K
====================================================================
History
-August 08,2005; Jens Scharsig <esw@bus-elektronik.de>
+August 08,2005; Jens Scharsig <esw@bus-elektronik.de>
MCF5282 implementation without preloader
-January 12, 2004; <josef.baumgartner@telex.de>
+January 12, 2004; <josef.baumgartner@telex.de>
====================================================================
This file contains status information for the port of U-Boot to the
@@ -82,8 +82,8 @@ Board specific code is located in: board/bus/EB+MCF-EV123
To configure the board, type:
-make EB+MCF-EV123_config for external FLASH
-make EB+MCF-EV123_internal_config for internal FLASH
+make EB+MCF-EV123_config for external FLASH
+make EB+MCF-EV123_internal_config for internal FLASH
4. CONFIGURATION OPTIONS/SETTINGS
@@ -149,7 +149,7 @@ CFG_RFD -- defines the PLL Reduce Frecuency Devider
CFG_CSx_BASE -- defines the base address of chip select x
CFG_CSx_SIZE -- defines the memory size (address range) of chip select x
CFG_CSx_WIDTH -- defines the bus with of chip select x
-CFG_CSx_RO -- if set to 0 chip select x is read/wirte
+CFG_CSx_RO -- if set to 0 chip select x is read/wirte
else chipselct is read only
CFG_CSx_WS -- defines the number of wait states of chip select x
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 3ed5cd3..6099da2 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -19,7 +19,7 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
1. base source code
The code is based on sources from the Linux kernel
- ( arch/sh/kernel/cf-enabler.c ).
+ ( arch/sh/kernel/cf-enabler.c ).
2. How to use
The options you have to specify in the config file are (with the
@@ -27,14 +27,14 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
* CONFIG_MARUBUN_PCCARD
If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
- ex. #define CONFIG_MARUBUN_PCCARD
+ ex. #define CONFIG_MARUBUN_PCCARD
* CONFIG_PCMCIA_SLOT_A
- Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+ Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CFG_MARUBUN_MRSHPC
- This is MR-SHPC-01 PCMCIA controler base address.
+ This is MR-SHPC-01 PCMCIA controler base address.
You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
index 21580f9..cd56689 100644
--- a/doc/README.mpc8313erdb
+++ b/doc/README.mpc8313erdb
@@ -22,7 +22,7 @@ Freescale MPC8313ERDB Board
0x8000_0000 0x8fff_ffff PCI MEM 256M
0x9000_0000 0x9fff_ffff PCI_MMIO 256M
0xe000_0000 0xe00f_ffff IMMR 1M
- 0xe200_0000 0xe20f_ffff PCI IO 16M
+ 0xe200_0000 0xe20f_ffff PCI IO 16M
0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K
0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K
0xfa00_0000 0xfa00_7fff Board Status/ 32K
diff --git a/doc/README.mpc8349itx b/doc/README.mpc8349itx
index 4ae03ae..7f24623 100644
--- a/doc/README.mpc8349itx
+++ b/doc/README.mpc8349itx
@@ -17,7 +17,7 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards
2. Board Switches and Jumpers
-2.0 Descriptions for all of the board jumpers can be found in the User
+2.0 Descriptions for all of the board jumpers can be found in the User
Guide. Of particular interest to U-Boot developers is jumper J22:
Pos. Name Default Description
@@ -88,8 +88,8 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards
include/configs/MPC8349ITX.h
- CONFIG_MPC83XX MPC83xx family
- CONFIG_MPC8349 MPC8349 specific
+ CONFIG_MPC83XX MPC83xx family
+ CONFIG_MPC8349 MPC8349 specific
CONFIG_MPC8349ITX MPC8349E-mITX
CONFIG_MPC8349ITXGP MPC8349E-mITX-GP
diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index 5f20247..7c841ce 100644
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -1,7 +1,7 @@
Freescale MPC8360EMDS Board
-----------------------------------------
1. Board Switches and Jumpers
-1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
For some reason, the HW designers describe the switch settings
in terms of 0 and 1, and then map that to physical switches where
the label "On" refers to logic 0 and "Off" is logic 1.
diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds
index 7823595..a14da0f 100644
--- a/doc/README.mpc837xemds
+++ b/doc/README.mpc837xemds
@@ -1,7 +1,7 @@
Freescale MPC837xEMDS Board
-----------------------------------------
1. Board Switches and Jumpers
-1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
For some reason, the HW designers describe the switch settings
in terms of 0 and 1, and then map that to physical switches where
the label "On" refers to logic 0 and "Off" is logic 1.
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index ac56cca..1c41d77 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -55,7 +55,7 @@ Switches:
halves (virtual banks)
0 :: normal
SW5(3) = 0 CFG_FLASHWP = 0 :: not protected
- SW5(4) = 0 CFG_PORTDIV = 1 :: 2:1 for PD4
+ SW5(4) = 0 CFG_PORTDIV = 1 :: 2:1 for PD4
1:1 for PD6
SW5(5-6) = 11 CFG_PIXISOPT = 11 :: s/w determined
SW5(7-8) = 11 CFG_LADOPT = 11 :: s/w determined
diff --git a/doc/README.video b/doc/README.video
index c145d9b..34e199c 100644
--- a/doc/README.video
+++ b/doc/README.video
@@ -26,5 +26,5 @@ U-Boot MPC8xx video controller driver
The driver has been tested with the following configurations:
-- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
+- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
- GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it