summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.fsl-ddr150
1 files changed, 150 insertions, 0 deletions
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index abfb7f1..1d50153 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -222,3 +222,153 @@ Single slot system
Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
+
+Interactive DDR debugging
+===========================
+
+For DDR parameter tuning up and debugging, the interactive DDR debugging can
+be activated by saving an environment variable "ddr_interactive". The value
+doesn't matter. Once activated, U-boot prompts "FSL DDR>" before enabling DDR
+controller. The available commands can be seen by typing "help".
+
+The example flow of using interactive debugging is
+type command "compute" to calculate the parameters from the default
+type command "print" with arguments to show SPD, options, registers
+type command "edit" with arguments to change any if desired
+type command "go" to continue calculation and enable DDR controller
+type command "reset" to reset the board
+type command "recompute" to reload SPD and start over
+
+Note, check "next_step" to show the flow. For example, after edit opts, the
+next_step is STEP_ASSIGN_ADDRESSES. After editing registers, the next_step is
+STEP_PROGRAM_REGS. Upon issuing command "go", DDR controller will be enabled
+with current setting without further calculation.
+
+The detail syntax for each commands are
+
+print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
+ c<n> - the controller number, eg. c0, c1
+ d<n> - the DIMM number, eg. d0, d1
+ spd - print SPD data
+ dimmparms - DIMM paramaters, calcualted from SPD
+ commonparms - lowest common parameters for all DIMMs
+ opts - options
+ addresses - address assignment (not implemented yet)
+ regs - controller registers
+
+edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
+ c<n> - the controller number, eg. c0, c1
+ d<n> - the DIMM number, eg. d0, d1
+ spd - print SPD data
+ dimmparms - DIMM paramaters, calcualted from SPD
+ commonparms - lowest common parameters for all DIMMs
+ opts - options
+ addresses - address assignment (not implemented yet)
+ regs - controller registers
+ <element> - name of the modified element
+ byte number if the object is SPD
+ <value> - decimal or heximal (prefixed with 0x) numbers
+
+reset
+ no arguement - reset the board
+
+recompute
+ no argument - reload SPD and start over
+
+compute
+ no argument - recompute from current next_step
+
+next_step
+ no argument - show current next_step
+
+help
+ no argument - print a list of all commands
+
+go
+ no argument - program memory controller(s) and continue with U-boot
+
+Examples of debugging flow
+
+ FSL DDR>compute
+ Detected UDIMM UG51U6400N8SU-ACF
+ SL DDR>print
+ print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
+ FSL DDR>print dimmparms
+ DIMM parameters: Controller=0 DIMM=0
+ DIMM organization parameters:
+ module part name = UG51U6400N8SU-ACF
+ rank_density = 2147483648 bytes (2048 megabytes)
+ capacity = 4294967296 bytes (4096 megabytes)
+ burst_lengths_bitmask = 0C
+ base_addresss = 0 (00000000 00000000)
+ n_ranks = 2
+ data_width = 64
+ primary_sdram_width = 64
+ ec_sdram_width = 0
+ registered_dimm = 0
+ n_row_addr = 15
+ n_col_addr = 10
+ edc_config = 0
+ n_banks_per_sdram_device = 8
+ tCKmin_X_ps = 1500
+ tCKmin_X_minus_1_ps = 0
+ tCKmin_X_minus_2_ps = 0
+ tCKmax_ps = 0
+ caslat_X = 960
+ tAA_ps = 13125
+ caslat_X_minus_1 = 0
+ caslat_X_minus_2 = 0
+ caslat_lowest_derated = 0
+ tRCD_ps = 13125
+ tRP_ps = 13125
+ tRAS_ps = 36000
+ tWR_ps = 15000
+ tWTR_ps = 7500
+ tRFC_ps = 160000
+ tRRD_ps = 6000
+ tRC_ps = 49125
+ refresh_rate_ps = 7800000
+ tIS_ps = 0
+ tIH_ps = 0
+ tDS_ps = 0
+ tDH_ps = 0
+ tRTP_ps = 7500
+ tDQSQ_max_ps = 0
+ tQHS_ps = 0
+ FSL DDR>edit c0 opts ECC_mode 0
+ FSL DDR>edit c0 regs cs0_bnds 0x000000FF
+ FSL DDR>go
+ 2 GiB left unmapped
+ 4 GiB (DDR3, 64-bit, CL=9, ECC off)
+ DDR Chip-Select Interleaving Mode: CS0+CS1
+ Testing 0x00000000 - 0x7fffffff
+ Testing 0x80000000 - 0xffffffff
+ Remap DDR 2 GiB left unmapped
+
+ POST memory PASSED
+ Flash: 128 MiB
+ L2: 128 KB enabled
+ Corenet Platform Cache: 1024 KB enabled
+ SERDES: timeout resetting bank 3
+ SRIO1: disabled
+ SRIO2: disabled
+ MMC: FSL_ESDHC: 0
+ EEPROM: Invalid ID (ff ff ff ff)
+ PCIe1: disabled
+ PCIe2: Root Complex, x1, regs @ 0xfe201000
+ 01:00.0 - 8086:10d3 - Network controller
+ PCIe2: Bus 00 - 01
+ PCIe3: disabled
+ In: serial
+ Out: serial
+ Err: serial
+ Net: Initializing Fman
+ Fman1: Uploading microcode version 101.8.0
+ e1000: 00:1b:21:81:d2:e0
+ FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, e1000#0 [PRIME]
+ Warning: e1000#0 MAC addresses don't match:
+ Address in SROM is 00:1b:21:81:d2:e0
+ Address in environment is 00:e0:0c:00:ea:05
+
+ Hit any key to stop autoboot: 0
+ =>