diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README-i386 | 8 | ||||
| -rw-r--r-- | doc/README.IPHASE4539 | 6 |
2 files changed, 7 insertions, 7 deletions
diff --git a/doc/README-i386 b/doc/README-i386 index 99b3e19..862f3f7 100644 --- a/doc/README-i386 +++ b/doc/README-i386 @@ -1,4 +1,4 @@ -This is my attempt to port PPCBoot to the i386 platform. This +This is my attempt to port U-Boot to the i386 platform. This work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se It is currently capable of booting a linux bzImage from flash on @@ -28,13 +28,13 @@ To use this code on the CDP: 2) Program it in to the CDP flashbank with remon - ppcboot.bin should be programmed att offset 0x7e000 and the kernel at + u-boot.bin should be programmed att offset 0x7e000 and the kernel at offset 0. If you want to use a jffs2 root file system (not included here), it should be programmed to offset 0x100000. remon> z remon> yi - remon> ns ppcboot.bin 7e0000 + remon> ns u-boot.bin 7e0000 remon> ns bzImage 0 remon> ns image.jffs2 100000 @@ -43,7 +43,7 @@ To use this code on the CDP: remon> z remon> g -4) PPCboot should output some message and a prompt on the terminal, to +4) U-Boot should output some message and a prompt on the terminal, to start the kernel issue the following command: BOOT> bootm diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539 index d3db38e..9302ff5 100644 --- a/doc/README.IPHASE4539 +++ b/doc/README.IPHASE4539 @@ -332,10 +332,10 @@ Linux: $ make IPHASE4539_config $ make oldconfig $ make dep - $ make pImage - $ cp -p arch/ppc/mbxboot/pImage /tftpboot + $ make uImage + $ cp -p arch/ppc/mbxboot/uImage /tftpboot - Load pImage via tftp and boot it. + Load uImage via tftp and boot it. Flash organisation: |