diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.marubun-pcmcia | 65 | ||||
| -rw-r--r-- | doc/README.sh | 61 |
2 files changed, 126 insertions, 0 deletions
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia new file mode 100644 index 0000000..3ed5cd3 --- /dev/null +++ b/doc/README.marubun-pcmcia @@ -0,0 +1,65 @@ + +U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver + Last update 21/11/2007 by Nobuhiro Iwamatsu + +======================================================================================== + +0. What's this? + This driver supports MARUBUN MR-SHPC-01. + url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html + (Sorry Japanese only.) + + This chip is used with SuperH well, and adopted by the + reference board. + ex. * MS7750SE01 + * MS7722SE01 + * other + + This chip doesn't support CardBus. + +1. base source code + The code is based on sources from the Linux kernel + ( arch/sh/kernel/cf-enabler.c ). + +2. How to use + The options you have to specify in the config file are (with the + value for my board as an example): + + * CONFIG_MARUBUN_PCCARD + If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD. + ex. #define CONFIG_MARUBUN_PCCARD + + * CONFIG_PCMCIA_SLOT_A + Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A . + ex. #define CONFIG_PCMCIA_SLOT_A 1 + + * CFG_MARUBUN_MRSHPC + This is MR-SHPC-01 PCMCIA controler base address. + You should do the setting matched to your environment. + ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0 + ( for MS7722SE01 environment ) + + * CFG_MARUBUN_MW1 + This is MR-SHPC-01 memory window base address. + You should do the setting matched to your environment. + ex. #define CFG_MARUBUN_MW1 0xb0400000 + ( for MS7722SE01 environment ) + + * CFG_MARUBUN_MW1 + This is MR-SHPC-01 attribute window base address. + You should do the setting matched to your environment. + ex. #define CFG_MARUBUN_MW2 0xb0500000 + ( for MS7722SE01 environment ) + + * CFG_MARUBUN_MW1 + This is MR-SHPC-01 I/O window base address. + You should do the setting matched to your environment. + ex. #define CFG_MARUBUN_IO 0xb0600000 + ( for MS7722SE01 environment ) + +3. Other + * Check Compact Flash only. + * Maybe, NE2000 compatible NIC is sure to move. + +Copyright (c) 2007 + Nobuhiro Iwamatsu <iwamatsu@nigaur.org> diff --git a/doc/README.sh b/doc/README.sh new file mode 100644 index 0000000..075d360 --- /dev/null +++ b/doc/README.sh @@ -0,0 +1,61 @@ + +U-Boot for Renesas SuperH + Last update 08/10/2007 by Nobuhiro Iwamatsu + +================================================================================ +0. What's this? + This file contains status information for the port of U-Boot to the + Renesas SuperH series of CPUs. + +================================================================================ +1. Overview + SuperH has an original boot loader. However, source code is dirty, and + maintenance is not done. + To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu + started the porting to u-boot in 2007. + +================================================================================ +2. Supported CPUs + + 2.1. Renesas SH7750/SH7750R + 2.2. Renesas SH7722 + +================================================================================ +3. Supported Boards + + 3.1. Hitachi UL MS7750SE01/MS7750RSE01 + Board specific code is in board/ms7750se + To use this board, type "make ms7750se_config". + + 3.2. Hitachi UL MS7722SE01 + Board specific code is in board/ms7722se + To use this board, type "make ms7722se_config". + + ** README ** + In SuperH, S-record and binary of made u-boot work on the memory. + When u-boot is written in the flash, it is necessary to change the + address by using 'objcopy'. + ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec + +================================================================================ +4. Compiler + You can use the following of u-boot to compile. + - SuperH Linux Open site + http://www.superh-linux.org/ + - KPIT GNU tools + http://www.kpitgnutools.com/ + +================================================================================ +5. Future + I plan to support the following CPUs and boards. + 5.1. CPUs + - SH7710/SH7712 (SH3) + - SH7780(SH4) + - SH7785(SH4) + + 5.2. Boards + - Many boards ;-) + +================================================================================ +Copyright (c) 2007 + Nobuhiro Iwamatsu <iwamatsu@nigaur.org> |