summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.marubun-pcmcia34
-rw-r--r--doc/README.sh19
2 files changed, 26 insertions, 27 deletions
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 73c9f7f..3ed5cd3 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -1,59 +1,59 @@
U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
Last update 21/11/2007 by Nobuhiro Iwamatsu
-
+
========================================================================================
-0. What's this?
+0. What's this?
This driver supports MARUBUN MR-SHPC-01.
url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
(Sorry Japanese only.)
- This chip is used with SuperH well, and adopted by the
- reference board.
+ This chip is used with SuperH well, and adopted by the
+ reference board.
ex. * MS7750SE01
* MS7722SE01
- * other
-
+ * other
+
This chip doesn't support CardBus.
-1. base source code
+1. base source code
The code is based on sources from the Linux kernel
- ( arch/sh/kernel/cf-enabler.c ).
+ ( arch/sh/kernel/cf-enabler.c ).
-2. How to use
+2. How to use
The options you have to specify in the config file are (with the
value for my board as an example):
* CONFIG_MARUBUN_PCCARD
If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
ex. #define CONFIG_MARUBUN_PCCARD
-
+
* CONFIG_PCMCIA_SLOT_A
Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CFG_MARUBUN_MRSHPC
This is MR-SHPC-01 PCMCIA controler base address.
- You should do the setting matched to your environment.
- ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+ You should do the setting matched to your environment.
+ ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )
* CFG_MARUBUN_MW1
This is MR-SHPC-01 memory window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MW1 0xb0400000
( for MS7722SE01 environment )
-
+
* CFG_MARUBUN_MW1
This is MR-SHPC-01 attribute window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MW2 0xb0500000
( for MS7722SE01 environment )
-
+
* CFG_MARUBUN_MW1
This is MR-SHPC-01 I/O window base address.
- You should do the setting matched to your environment.
+ You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_IO 0xb0600000
( for MS7722SE01 environment )
diff --git a/doc/README.sh b/doc/README.sh
index 0441a7a..075d360 100644
--- a/doc/README.sh
+++ b/doc/README.sh
@@ -1,5 +1,5 @@
-U-Boot for Renesas SuperH
+U-Boot for Renesas SuperH
Last update 08/10/2007 by Nobuhiro Iwamatsu
================================================================================
@@ -9,10 +9,10 @@ U-Boot for Renesas SuperH
================================================================================
1. Overview
- SuperH has an original boot loader. However, source code is dirty, and
+ SuperH has an original boot loader. However, source code is dirty, and
maintenance is not done.
- To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
- started the porting to u-boot in 2007.
+ To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+ started the porting to u-boot in 2007.
================================================================================
2. Supported CPUs
@@ -33,13 +33,13 @@ U-Boot for Renesas SuperH
** README **
In SuperH, S-record and binary of made u-boot work on the memory.
- When u-boot is written in the flash, it is necessary to change the
- address by using 'objcopy'.
+ When u-boot is written in the flash, it is necessary to change the
+ address by using 'objcopy'.
ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
-
+
================================================================================
4. Compiler
- You can use the following of u-boot to compile.
+ You can use the following of u-boot to compile.
- SuperH Linux Open site
http://www.superh-linux.org/
- KPIT GNU tools
@@ -52,11 +52,10 @@ U-Boot for Renesas SuperH
- SH7710/SH7712 (SH3)
- SH7780(SH4)
- SH7785(SH4)
-
+
5.2. Boards
- Many boards ;-)
================================================================================
Copyright (c) 2007
Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
-