diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.mpc8641hpcn | 40 |
1 files changed, 21 insertions, 19 deletions
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn index 2c3c703..0a6e715 100644 --- a/doc/README.mpc8641hpcn +++ b/doc/README.mpc8641hpcn @@ -79,51 +79,53 @@ Switches: 3. Flash U-Boot --------------- -The flash range 0xFF800000 to 0xFFFFFFFF can be divided into 2 halves. +The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves. It is possible to use either half to boot using u-boot. Switch 5 bit 2 is used for this purpose. -0xFF800000 to 0xFFBFFFFF - 4MB -0xFFC00000 to 0xFFFFFFFF - 4MB -When this bit is 0, U-Boot is at 0xFFF00000. -When this bit is 1, U-Boot is at 0xFFB00000. +0xEF800000 to 0xEFBFFFFF - 4MB +0xEFC00000 to 0xEFFFFFFF - 4MB +When this bit is 0, U-Boot is at 0xEFF00000. +When this bit is 1, U-Boot is at 0xEFB00000. Use the above mentioned flash commands to program the other half, and use switch 5, bit 2 to alternate between the halves. Note: The booting -version of U-Boot will always be at 0xFFF00000. +version of U-Boot will always be at 0xEFF00000. -To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF): +To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF): tftp 1000000 u-boot.bin protect off all - erase fff00000 +$filesize - cp.b 1000000 fff00000 $filesize + erase eff00000 +$filesize + cp.b 1000000 eff00000 $filesize or use tftpflash command: run tftpflash -To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF): +To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): tftp 1000000 u-boot.bin - erase ffb00000 +$filesize - cp.b 1000000 ffb00000 $filesize + erase efb00000 +$filesize + cp.b 1000000 efb00000 $filesize 4. Memory Map ------------- +NOTE: RIO and PCI are mutually exclusive, so they share an address Memory Range Device Size ------------ ------ ---- 0x0000_0000 0x7fff_ffff DDR 2G + 0x8000_0000 0x9fff_ffff RIO MEM 512M 0x8000_0000 0x9fff_ffff PCI1/PEX1 MEM 512M - 0xa000_0000 0xafff_ffff PCI2/PEX2 MEM 512M - 0xf800_0000 0xf80f_ffff CCSR 1M - 0xf810_0000 0xf81f_ffff PIXIS 1M + 0xa000_0000 0xbfff_ffff PCI2/PEX2 MEM 512M + 0xffe0_0000 0xffef_ffff CCSR 1M + 0xffdf_0000 0xffdf_7fff PIXIS 8K + 0xffdf_8000 0xffdf_ffff CF 8K 0xf840_0000 0xf840_3fff Stack space 32K - 0xe200_0000 0xe2ff_ffff PCI1/PEX1 IO 16M - 0xe300_0000 0xe3ff_ffff PCI2/PEX2 IO 16M - 0xfe00_0000 0xfeff_ffff Flash(alternate)16M - 0xff00_0000 0xffff_ffff Flash(boot bank)16M + 0xffc0_0000 0xffc0_ffff PCI1/PEX1 IO 64K + 0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K + 0xef80_0000 0xefff_ffff Flash 8M 5. pixis_reset command -------------------- |