3 files changed, 63 insertions, 1 deletions
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 6185cd8..002818c 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -160,7 +160,7 @@ Note on current image address
 
 When bootm is called without arguments, the image at current image address is
 booted. The current image address is the address set most recently by a load
-command, etc, and is by default equal to CFG_LOAD_ADDR. For example, consider
+command, etc, and is by default equal to CONFIG_SYS_LOAD_ADDR. For example, consider
 the following commands:
 
 tftp 200000 /tftpboot/kernel
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
new file mode 100644
index 0000000..285cf73
--- /dev/null
+++ b/doc/uImage.FIT/update3.its
@@ -0,0 +1,41 @@
+/*
+ * Example Automatic software update file.
+ */
+/ {
+	description = "Automatic software updates: kernel, ramdisk, FDT";
+	#address-cells = <1>;
+
+	images {
+		update@1 {
+			description = "Linux kernel binary";
+			data = /incbin/("./vmlinux.bin.gz");
+			compression = "none";
+			type = "firmware";
+			load = <FF700000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+		update@2 {
+			description = "Ramdisk image";
+			data = /incbin/("./ramdisk_image.gz");
+			compression = "none";
+			type = "firmware";
+			load = <FF8E0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+
+		update@3 {
+			description = "FDT blob";
+			data = /incbin/("./blob.fdt");
+			compression = "none";
+			type = "firmware";
+			load = <FFAC0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+	};
+};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
new file mode 100644
index 0000000..e0d27ea
--- /dev/null
+++ b/doc/uImage.FIT/update_uboot.its
@@ -0,0 +1,21 @@
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+/ {
+	description = "Automatic U-Boot update";
+	#address-cells = <1>;
+
+	images {
+		update@1 {
+			description = "U-Boot binary";
+			data = /incbin/("./u-boot.bin");
+			compression = "none";
+			type = "firmware";
+			load = <FFFC0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+	};
+};