summaryrefslogtreecommitdiff
path: root/doc/uImage.FIT
diff options
context:
space:
mode:
Diffstat (limited to 'doc/uImage.FIT')
-rw-r--r--doc/uImage.FIT/command_syntax_extensions.txt2
-rw-r--r--doc/uImage.FIT/update3.its41
-rw-r--r--doc/uImage.FIT/update_uboot.its21
3 files changed, 63 insertions, 1 deletions
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 6185cd8..002818c 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -160,7 +160,7 @@ Note on current image address
When bootm is called without arguments, the image at current image address is
booted. The current image address is the address set most recently by a load
-command, etc, and is by default equal to CFG_LOAD_ADDR. For example, consider
+command, etc, and is by default equal to CONFIG_SYS_LOAD_ADDR. For example, consider
the following commands:
tftp 200000 /tftpboot/kernel
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
new file mode 100644
index 0000000..285cf73
--- /dev/null
+++ b/doc/uImage.FIT/update3.its
@@ -0,0 +1,41 @@
+/*
+ * Example Automatic software update file.
+ */
+/ {
+ description = "Automatic software updates: kernel, ramdisk, FDT";
+ #address-cells = <1>;
+
+ images {
+ update@1 {
+ description = "Linux kernel binary";
+ data = /incbin/("./vmlinux.bin.gz");
+ compression = "none";
+ type = "firmware";
+ load = <FF700000>;
+ hash@1 {
+ algo = "sha1";
+ };
+ };
+ update@2 {
+ description = "Ramdisk image";
+ data = /incbin/("./ramdisk_image.gz");
+ compression = "none";
+ type = "firmware";
+ load = <FF8E0000>;
+ hash@1 {
+ algo = "sha1";
+ };
+ };
+
+ update@3 {
+ description = "FDT blob";
+ data = /incbin/("./blob.fdt");
+ compression = "none";
+ type = "firmware";
+ load = <FFAC0000>;
+ hash@1 {
+ algo = "sha1";
+ };
+ };
+ };
+};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
new file mode 100644
index 0000000..e0d27ea
--- /dev/null
+++ b/doc/uImage.FIT/update_uboot.its
@@ -0,0 +1,21 @@
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+/ {
+ description = "Automatic U-Boot update";
+ #address-cells = <1>;
+
+ images {
+ update@1 {
+ description = "U-Boot binary";
+ data = /incbin/("./u-boot.bin");
+ compression = "none";
+ type = "firmware";
+ load = <FFFC0000>;
+ hash@1 {
+ algo = "sha1";
+ };
+ };
+ };
+};