diff options
Diffstat (limited to 'doc/driver-model/UDM-mmc.txt')
| -rw-r--r-- | doc/driver-model/UDM-mmc.txt | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/doc/driver-model/UDM-mmc.txt b/doc/driver-model/UDM-mmc.txt new file mode 100644 index 0000000..bed4306 --- /dev/null +++ b/doc/driver-model/UDM-mmc.txt @@ -0,0 +1,319 @@ +The U-Boot Driver Model Project +=============================== +MMC system analysis +=================== +Marek Vasut <marek.vasut@gmail.com> +2012-02-25 + +I) Overview +----------- + +The MMC subsystem is already quite dynamic in it's nature. It's only necessary +to flip the subsystem to properly defined API. + +The probing process of MMC drivers start by calling "mmc_initialize()", +implemented by MMC framework, from the architecture initialization file. The +"mmc_initialize()" function in turn calls "board_mmc_init()" function and if +this doesn't succeed, "cpu_mmc_init()" function is called. It is important to +note that both of the "*_mmc_init()" functions have weak aliases to functions +which automatically fail. + +Both of the "*_mmc_init()" functions though serve only one purpose. To call +driver specific probe function, which in turn actually registers the driver with +MMC subsystem. Each of the driver specific probe functions is currently done in +very ad-hoc manner. + +The registration with the MMC subsystem is done by calling "mmc_register()", +whose argument is a runtime configured structure of information about the MMC +driver. Currently, the information structure is intermixed with driver's internal +data. The description of the structure follows: + +struct mmc { + /* + * API: Allows this driver to be a member of the linked list of all MMC drivers + * registered with MMC subsystem + */ + struct list_head link; + + /* DRIVER: Name of the registered driver */ + char name[32]; + + /* DRIVER: Driver's private data */ + void *priv; + + /* DRIVER: Voltages the host bus can provide */ + uint voltages; + + /* API: Version of the card */ + uint version; + + /* API: Test if the driver was already initialized */ + uint has_init; + + /* DRIVER: Minimum frequency the host bus can provide */ + uint f_min; + + /* DRIVER: Maximum frequency the host bus can provide */ + uint f_max; + + /* API: Is the card SDHC */ + int high_capacity; + + /* API: Actual width of the bus used by the current card */ + uint bus_width; + + /* + * DRIVER: Clock frequency to be configured on the host bus, this is read-only + * for the driver. + */ + uint clock; + + /* API: Capabilities of the card */ + uint card_caps; + + /* DRIVER: MMC bus capabilities */ + uint host_caps; + + /* API: Configuration and ID data retrieved from the card */ + uint ocr; + uint scr[2]; + uint csd[4]; + uint cid[4]; + ushort rca; + + /* API: Partition configuration */ + char part_config; + + /* API: Number of partitions */ + char part_num; + + /* API: Transmission speed */ + uint tran_speed; + + /* API: Read block length */ + uint read_bl_len; + + /* API: Write block length */ + uint write_bl_len; + + /* API: Erase group size */ + uint erase_grp_size; + + /* API: Capacity of the card */ + u64 capacity; + + /* API: Descriptor of this block device */ + block_dev_desc_t block_dev; + + /* DRIVER: Function used to submit command to the card */ + int (*send_cmd)(struct mmc *mmc, + struct mmc_cmd *cmd, struct mmc_data *data); + + /* DRIVER: Function used to configure the host */ + void (*set_ios)(struct mmc *mmc); + + /* DRIVER: Function used to initialize the host */ + int (*init)(struct mmc *mmc); + + /* DRIVER: Function used to report the status of Card Detect pin */ + int (*getcd)(struct mmc *mmc); + + /* + * DRIVER: Maximum amount of blocks sent during multiblock xfer, + * set to 0 to autodetect. + */ + uint b_max; +}; + +The API above is the new API used by most of the drivers. There're still drivers +in the tree that use old, legacy API though. + +2) Approach +----------- + +To convert the MMC subsystem to a proper driver model, the "struct mmc" +structure will have to be properly split in the first place. The result will +consist of multiple parts, first will be the structure defining operations +provided by the MMC driver: + +struct mmc_driver_ops { + /* Function used to submit command to the card */ + int (*send_cmd)(struct mmc *mmc, + struct mmc_cmd *cmd, struct mmc_data *data); + /* DRIVER: Function used to configure the host */ + void (*set_ios)(struct mmc *mmc); + /* Function used to initialize the host */ + int (*init)(struct mmc *mmc); + /* Function used to report the status of Card Detect pin */ + int (*getcd)(struct mmc *mmc); +} + +The second part will define the parameters of the MMC driver: + +struct mmc_driver_params { + /* Voltages the host bus can provide */ + uint32_t voltages; + /* Minimum frequency the host bus can provide */ + uint32_t f_min; + /* Maximum frequency the host bus can provide */ + uint32_t f_max; + /* MMC bus capabilities */ + uint32_t host_caps; + /* + * Maximum amount of blocks sent during multiblock xfer, + * set to 0 to autodetect. + */ + uint32_t b_max; +} + +And finally, the internal per-card data of the MMC subsystem core: + +struct mmc_card_props { + /* Version of the card */ + uint32_t version; + /* Test if the driver was already initializes */ + bool has_init; + /* Is the card SDHC */ + bool high_capacity; + /* Actual width of the bus used by the current card */ + uint8_t bus_width; + /* Capabilities of the card */ + uint32_t card_caps; + /* Configuration and ID data retrieved from the card */ + uint32_t ocr; + uint32_t scr[2]; + uint32_t csd[4]; + uint32_t cid[4]; + uint16_t rca; + /* Partition configuration */ + uint8_t part_config; + /* Number of partitions */ + uint8_t part_num; + /* Transmission speed */ + uint32_t tran_speed; + /* Read block length */ + uint32_t read_bl_len; + /* Write block length */ + uint32_t write_bl_len; + /* Erase group size */ + uint32_t erase_grp_size; + /* Capacity of the card */ + uint64_t capacity; + /* Descriptor of this block device */ + block_dev_desc_t block_dev; +} + +The probe() function will then register the MMC driver by calling: + + mmc_device_register(struct instance *i, struct mmc_driver_ops *o, + struct mmc_driver_params *p); + +The struct mmc_driver_params will have to be dynamic in some cases, but the +driver shouldn't modify it's contents elsewhere than in probe() call. + +Next, since the MMC drivers will now be consistently registered into the driver +tree from board file, the functions "board_mmc_init()" and "cpu_mmc_init()" will +disappear altogether. + +As for the legacy drivers, these will either be converted or removed altogether. + +III) Analysis of in-tree drivers +-------------------------------- + + 1) arm_pl180_mmci.c + ------------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 2) atmel_mci.c + -------------- + This driver uses the legacy API and should be removed unless converted. It is + probably possbible to replace this driver with gen_atmel_mci.c . No conversion + will be done on this driver. + + 3) bfin_sdh.c + ------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 4) davinci_mmc.c + ---------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 5) fsl_esdhc.c + -------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple, unless some problem appears due to the FDT + component of the driver. + + 6) ftsdc010_esdhc.c + ------------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 7) gen_atmel_mci.c + ------------------ + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 8) mmc_spi.c + ------------ + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 9) mv_sdhci.c + ------------- + This is a component of the SDHCI support, allowing it to run on Marvell + Kirkwood chip. It is probable the SDHCI support will have to be modified to + allow calling functions from this file based on information passed via + platform_data. + + 10) mxcmmc.c + ------------ + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 11) mxsmmc.c + ------------ + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 12) omap_hsmmc.c + ---------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 13) pxa_mmc.c + ------------- + This driver uses the legacy API and is written in a severely ad-hoc manner. + This driver will be removed in favor of pxa_mmc_gen.c, which is proved to work + better and is already well tested. No conversion will be done on this driver + anymore. + + 14) pxa_mmc_gen.c + ----------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 15) s5p_mmc.c + ------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 16) sdhci.c + ----------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple, though it'd be necessary to modify this driver + to also support the Kirkwood series and probably also Tegra series of CPUs. + See the respective parts of this section for details. + + 17) sh_mmcif.c + -------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. + + 18) tegra2_mmc.c + ---------------- + Follows the new API and also has a good encapsulation of the whole driver. The + conversion here will be simple. |