summaryrefslogtreecommitdiff
path: root/doc/README.t1040-l2switch
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.t1040-l2switch')
-rw-r--r--doc/README.t1040-l2switch48
1 files changed, 48 insertions, 0 deletions
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch
new file mode 100644
index 0000000..14dbf31
--- /dev/null
+++ b/doc/README.t1040-l2switch
@@ -0,0 +1,48 @@
+This file contains information for VSC9953, a Vitesse L2 Switch IP
+which is integrated in the T1040/T1020 Freescale SoCs.
+
+About Device:
+=============
+VSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
+ - 8192 MAC addresses
+ - Static Address provisioning
+ - Dynamic learning of MAC addresses and aging
+ - 4096 VLANs
+ - Independent and shared VLAN learning (IVL, SVL)
+ - Policing with storm control and MC/BC protection
+ - IPv4 and IPv6 multicast
+ - Jumbo frames (9.6 KB)
+ - Access Control List
+ - VLAN editing, translation and remarking
+ - RMON counters per port
+
+Switch interfaces:
+ - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
+ - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
+ to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
+
+Commands Overview:
+=============
+Commands supported
+ - enable/disable a port
+ - check a port's link speed, duplexity and status.
+
+Commands syntax
+ ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
+ ethsw port <port_nr> show - show an l2 switch port's configuration
+
+ port_nr=0..9; use "all" for all ports
+
+=> ethsw port all show
+ Port Status Link Speed Duplex
+ 0 enabled down 10 half
+ 1 enabled down 10 half
+ 2 enabled down 10 half
+ 3 enabled up 1000 full
+ 4 disabled down - half
+ 5 disabled down - half
+ 6 disabled down - half
+ 7 disabled down - half
+ 8 enabled up 2500 full
+ 9 enabled up 2500 full
+=>